[Q] Damaged frame around the display - Sony Xperia T, TL, TX, V

HI,
I have an Xperia T.
Unfortunately my shiny frame around the display is damaged. It's possible to buy and replace only this frame on the phone? Without the back cover, and the whole front side? I didn't find any.
Thanks

I think replacing one would be really hard as the screen is probably glued to this frame
Tapped from The Bond Phone!

Related

[Q] Xperia V, repairing the screen?

Hi guys.
So I've an issue .. With no SOny service centers around i rather cracked my screen, though i bought a new lcd+digitizer from ETS (etradesupply) but, as i hold it in my hand .. I've been googling my rear off, attempting to find a guide,how on earth do you actually replace the screen?
Just heat up the screen and peel it off, or will i need to lift the motherboard out, and attack it from behind so to speak?
Surely someone's done this, and can point me in the right direction .. Might i be able to just follow an Xperia Z guide on the matter?
Did you manage to repair it. I have just cracked mine above the ear piece, is the digitizer and lcd hard to separate? any advice before I order the new digitizer?
Anyone succeed to separate digitizer?

[Q] back glass and black surround

Hi guys I've just got a xperia z1 second hand now there a chip on th black frame on the back
I'm going to get a new back just wondering can the little black frame around the glass be replaced
Also how can i check for water damage please
Thanks guys

Broken digitizer

Hello,
is it possible to replace the digitzer of the Xperia Z by myself?
My display is fully working just the digitizer cracked. And my phone isn't usable anymore.
I found the Digitizer front cover glass for 35€.
If so does anybody have a good tutoriol to do so?
I have nothing to loose, sony care take 200€ for the replacement, for this money i can buy a new Phone.
I found a lot of videos on youtube where they replace the digitzer inkl. LCD display. But not where they only replace the digitizer front panel.
I saw that the digitzer is glued to the LCD display.
Anybody replace the Digitizer by himself and could provide me with a few tipps?
I saw it's possible to detach the Digitizer with a heat gun.
I have a little practice by reparing the display of my old Iphone 4.
Which parts do i need?
Front Cover Adhesive
Back Cover Adhesive
and Front cover glass inkl digitizer?
Thx for your Help.
Sorry for my english.
deleted
Same. Problem here... Been using my z thru otg :'(
Sent from my C6603 using Tapatalk
You can broke your lcd too, while un-soldering digitizer from lcd.
Happend to me once.
I've replaced complete LCD+digitizer in once. Do not forget to order new adhesives. Back adhesive will get big damage on dissembling process. Back cover might not stick very well with old ones.
LCD panels might include front adhesives on it.
You can buy the digitizer here:
http://rounded.com/xperia-z-l36h/
Tho I'm not 100% sure if they ship everywhere. It's pricey tho!
You can't unglue the digitizer from LCD without breaking them.
Try this
CaracalSef said:
You can't unglue the digitizer from LCD without breaking them.
Click to expand...
Click to collapse
Try It's Lowest Cost in India
http://www.ebay.in/itm/LCD-Display-...?pt=IN_Mobile_Accessories&hash=item20d6265d09
i just found this, i will go talk to man in repair shop, if he doesnt want to do it i will probably try it myself. it is extremely hard process and i dont know how do i remove glue residue from lcd, alcohol maybe? and i would ofc order new adhesives, it 5 usd for front and back.
http://m.youtube.com/watch?v=1TFFHFHUJjc
what do you guys think?

Looking to replace your SP's frame?

Hi,
Maybe it happened to you to be as unlucky or careless as me and you dropped your SP on the floor. Or you slipped on ice and you dropped on your SP, that was in your pocked. Both happened to me.
Now my SP is bent slightly and has a chipped frame. So I asked how much does it cost to fix this at the SONY service: 100$. Now, thinking myself smart, I bought a frame from a seller on eBay. Frame is fine, good looking, nice finish quality, did not expect that from a 10$ frame.
But there's a problem: you can change the frame only and together with the digitizer. They are glued together! So don't make my mistake to buy the frame only if you have a broken, bent or chipped frame. Buy both the frame and digitizer already assembled. This guys seems to selling a decent product: http://www.ebay.com/itm/281204540953
Here are some videos about dissassembling Xperia SP:
https://www.youtube.com/watch?v=Fso2mYUQJLM
https://www.youtube.com/watch?v=qETdiE6G_Wo
Hope I helped somebody today

How to replace metal frame around screen

Does anyone know how to replace metal frame around screen in RAZR I ? My phone after more than a year of use looks great beside this metal frame, so I've thought that I can replace it with new one. I even bought new metal frame, it came with a screwdriver - but after I've disassembled phone I've found out that screen is somehow "blended" with frame.
So my question is - does anyone know to replace this metal frame, or maybe anyone done that ?
adddaamo said:
I've found out that screen is somehow "blended" with frame.
Click to expand...
Click to collapse
I don't know if i am right, but i remember something that the screen/display and the frame got a solid connection...
U have to look at display replacement tutorials. there you can see if the frame is a single part or not...

Categories

Resources