[q] hd voice question - One (M7) Q&A, Help & Troubleshooting

Is this service already activated on all htc ones?
On my previous gs4, purchased sim free and not from specific networks that support this there was a code that you can enter into the dial pad to get to a menu where you can activate it by default.
My network (3 uk) offers the hd voice service but because my device was not purchased direct from them i dont know if it has been enabled on this device.
Anyone know a way to check or enter the AMR-WB (think thats what its called) menu.
thanks

No one else thought about this?
Sent from my HTC One using xda premium

Related

[Q] Voicemail number locked on unlocked phone

Good day,
Picked up the Samsung Galaxy S on friday branded for bell. The unlock procedure was quick and effortless which was great, thanks again XDA community. Once i configured my APN the phone works great on the Rogers Network.
However, I do have 1 problem. When i go to settings -> Call Settings -> Voicemail
Voicemail Service is set to "My Carrier" and the Voicemail number is set to "settings for My carrier"
Now I can't unselect "my carrier" and i cant change the number programmed in Voicemail as it's grayed out. The number in there is the Bell voicemail number.
Wondering if there is an easy way to change the number so i can input my rogers number? Am i stuck with this until Rogers supports the phone and i can firmware flash it with a rogers build (I know this will require me to root the phone ) ?
Thanks !
F
Same problem here
...Anyone?
same here cant find a fix
Had the same problem. You have to take the sim card and put it into another phone and change that voicemail number. Its a rogers default voicemail number. each area code is different. so if you don't know the number i suggest you take it into your local rogers dealer and let them change it in one of there loaner phones.
Cool I'll try that thanks.
Sent from my GT-I9000M using XDA App
Ya I'll try that too.
I don't think I've had to manually enter a vm password since the cantel/att days
I'm on rogers too but the phone was able to automatically pick up the voicemail settings with my rogers sim :S
Sent from my GT-I9000M using XDA App

[Q] No list of network under Network Operators > Availalbe Networks

Hi,
I am using KK4 rom with Kk4 Modem on Captivate i897.
When I go into Settings > Wireless and network > Mobile networks > Network operators, it just shows Default setup which is greyd out (but it connects to my network operator just fine)
How do I get it to display the list of availalbe networks and let me select the network?
I tried google and XDA forum, and wasn't able to find much information.
The only post I've found was from Infuse forum where someone suggested that ATT has locked this function in the modem level and flashing Rogers modem will fix it for Infuse.
I flashed Rogers KH2 modem, but it is still not displaying the list of networks.
Even my SGS II has that grayed out...
I think they are greyed out on network locked phone.
Sent from my Touchpad using xda premium
Doesn't matter if the phone is locked or not, mine is unlocked and it's still greyed out. (I'm still using at&t)
And this is on an I9000 ROM/kernel/modem, at&t has nothing to do with this set up at all.
I'm sure it would be the same if i had a tmobile Sim in. Think about it, the only network you can connect to with a carrier specific Sim, is that network.
So, does this leave the door open for a universal Sim? Hmmm
Sent from my SAMSUNG-SGH-I897 using XDA App
Maybe it's specific to Samsung phones (or Gingerbread)?
My previous 2 Android phones (HTC Magic and HTC Legend, both were running Froyo) did allow me to manually select the network.

[Q] Vodafone ROM on Orange Branded Phone

Hi,
I have an Orange branded Samsung Galaxy S that is being used on the Vodafone network. This all works find except for Data. The button from the drop down menu can't even be pressed/hilighted and 3G never shows on the status bar. We've tried putting an Orange sim in and data works fine with that but not with the Voda one.
Is this a conflict between the Orange Phone and Voda network and do I need to (or can I even) flash a Vodafone stock ROM in place of the Orange one?
Sorry if this has been asked before but I've searched and can't find an answer. Thanks for any help.
Either call up Vodaphone and ask them to send your APN settings or search their website or the net. Theses are the settings that tell the phone where to link to and which network you belong. The phone is probably trying to link to the Orange data network but obviously being rejected.
Thanks but we have tried that and it's all set up for Vodafone. That's why I couldn't understand that the orange sim connected straight away.
Sent from my HTC Desire HD A9191 using XDA
Hmm.. Have you asked if Vodafone has activated your data or de-activated it...
Also try going to the settings menu and make sure 3g data is enabled, and if it is maybe also check data roaming.
Lastly yes you should be able to flash a Vodafone stock rom on the phone as all it provides is the Vodafone bloatware. All the specs are the same in the device so there shouldn't be a conflict.
Thanks, I'll contact Vodafone again. Although I'm not holding out much hope, they seem to have as much technical knowledge as a 3 year old. The last one told me I would have to switch WiFi off before it would switch to 3g when out of range.
Thanks for your help
Sent from my HTC Desire HD A9191 using XDA

Not getting 3G :(

Hello,
I live in a country where 3G is in 2100 Mhz band. I bought the phone unlocked but it is still showing only E even after enter the operator's 3G APN.
I am not able to use the *#*#4636#*#* code OR able to choose the network. It is greyed out.
What should I do?!
Thanks.
That 4636 menu is disabled on the Atrix HD, download the app Phone Info from the market. It will allow you to access the menu and change the network settings.
Sent from my MB886 using xda app-developers app
BreakShadow said:
That 4636 menu is disabled on the Atrix HD, download the app Phone Info from the market. It will allow you to access the menu and change the network settings.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Its disable on the AT&T Atrix Hd just like on my Atrix 2 AT&T before. But for the Bell Atrix hd we can access the menu and we can change the network settings. Look for the app NETWORK from playstore but im not sure if you can change the network settings.
Sent from my MB886 using xda premium
I'm not sure if this will work with you, but I have an unlocked Bell Atrix HD on AT&T and I had similar problems at first. I was not getting any LTE even though there is LTE in my area.
I went to the AT&T store to tell them, this is what happened: When I first went there to get a micro SIM card (I had a regular SIM), they activated a new card, and put my AHD's IMEI number on my account. This allowed my phone to text, make phone calls, and connect to HSPA+, but no LTE. Well, since this phone is an unlocked version from another carrier, the IMEI number is not recognized by AT&T. So, the system didn't know that I had an LTE phone. So what they had to do was get a real IMEI number from an AHD that they had in the store, change the last number, and apply it to my account. This then activated the 4G LTE data plan for my phone.
I would try this.
Blue Bell said:
Hello,
I live in a country where 3G is in 2100 Mhz band. I bought the phone unlocked but it is still showing only E even after enter the operator's 3G APN.
I am not able to use the *#*#4636#*#* code OR able to choose the network. It is greyed out.
What should I do?!
Thanks.
Click to expand...
Click to collapse
Did u get the solution.
I m in CM10.1 Stable., But 3G not working for me. in India 3G works in 2100

Dev Edition on Simple Mobile: "Disconnected because service is unavailable"

Hello,
I bought a HTC One Developer Edition, and I purchased a Simple Mobile SIM (which uses T-Mobile's infrastructure) with an unlimited data plan.
The phone gets good reception and I can make and receive calls.
The problem is when I try to connect the mobile data and it says "Disconnected because service is unavailable".
I have tried several APN settings, from the one in simple mobile's webpage to some T-Mobile settings I've seen here, but always with no success.
I always reboot the phone when I change the APN settings..
What am I doing wrong?
Thanks in advance.
Any help?
What chances are there that this is a faulty unit?
The phone seems flawless otherwise..
Faulty unit ? Nope.
Something wrong on simple mobile. Yes
Contact them or Google it.
Sent from my HTC One using xda premium

Categories

Resources