Good day,
Picked up the Samsung Galaxy S on friday branded for bell. The unlock procedure was quick and effortless which was great, thanks again XDA community. Once i configured my APN the phone works great on the Rogers Network.
However, I do have 1 problem. When i go to settings -> Call Settings -> Voicemail
Voicemail Service is set to "My Carrier" and the Voicemail number is set to "settings for My carrier"
Now I can't unselect "my carrier" and i cant change the number programmed in Voicemail as it's grayed out. The number in there is the Bell voicemail number.
Wondering if there is an easy way to change the number so i can input my rogers number? Am i stuck with this until Rogers supports the phone and i can firmware flash it with a rogers build (I know this will require me to root the phone ) ?
Thanks !
F
Same problem here
...Anyone?
same here cant find a fix
Had the same problem. You have to take the sim card and put it into another phone and change that voicemail number. Its a rogers default voicemail number. each area code is different. so if you don't know the number i suggest you take it into your local rogers dealer and let them change it in one of there loaner phones.
Cool I'll try that thanks.
Sent from my GT-I9000M using XDA App
Ya I'll try that too.
I don't think I've had to manually enter a vm password since the cantel/att days
I'm on rogers too but the phone was able to automatically pick up the voicemail settings with my rogers sim :S
Sent from my GT-I9000M using XDA App
Related
Hi everyone. I have been doing a tonne of reading trying to figure out a couple of things for my Treo 750.
It is a Rogers phone for which I paid an online service provider to unlock. I am using my FIDO SIM in it without any problems.
It says I am always roaming and although assurances from FIDO I won't be charged Roaming fees, it gets kind of annoying everytime I check my email that it tells me I am roaming and asks if I am sure I want to do this....
So, I understand there is carrier specific info in the carrier.pxp file. I am told the Rogers network code is in this file.
Am I able to edit this to include the FIDO network code 302370 so the phone doesn't think it is always roaming?
Would it be better to unbrand / unlock the phone to WM6.1 via the methods I see here in the forums? [dubLeE's method].
Thanks everyone,
Ryan
It has nothing to do with your phone. It's the fact you are using the Fido GSM card on a Rogers network. It has nothing to do with whether your phone is locked or unlocked, and changing the carrier code won't do anything.
To disable the roaming network check when you check email, from Outlook Mobile go to Tools -> Options, choose the email account you've setup, then go to Send/Receive Schedule -> Advanced Settings -> check "Use automatic send / receive schedule when roaming"
Hi number16. Thanks for the reply.
The "Use automatic send / receive schedule when roaming" doesn't seem to prevent the "You are currently roaming. Synchronizing may result in additional charges" dialog box when the schedule is set to manual. In fact, the checkbox is greyed out and not selectable with a manual schedule. Even with an automated schedule configured, you are still prompted when doing a manual send/receive.
I was thinking that if the phone was configured such that it thought its' home network carrier code was the FIDO code, it wouldn't consider me roaming.
Anyways, sounds like I am stuck with it. Thanks again for the info
I have the exact same problem with my work Exchange email on a Rogers Touch Diamond. The roaming has to be defined by the ROM or registry. When I put my Fido SIM in a Rogers Samsung Jack flashed with the Fido ROM, there is no issue with roaming.
Hi there,
Same issue here, I am using my unlocked Treo 750 from Rogers on Bell network.
It works fine, except for the roaming issue.
How to get rid of that triangle icon on the top?
Were you able to edit the carrierDB.pxp file?
Please help.
Did you change your network settings over to the correct settings for the network of the SIM card you are using?
Unlocking a phone will allow other SIM cards to work, but if you don't change your network settings, then the phone will still try to connect to the Rogers network.
How do i unlock the network, i have a samsung corby phone which is rogers based and am using a fido sim card. Everything works except the internet which comes up as network error. please let me know if you can help. email- [email protected], thank you.
alyssaripley18 said:
How do i unlock the network, i have a samsung corby phone which is rogers based and am using a fido sim card. Everything works except the internet which comes up as network error. please let me know if you can help. email- [email protected], thank you.
Click to expand...
Click to collapse
This is a Palm Treo 750 forum. You should find a forum specific to your handset for exact instructions.
In general, your phone probably has a 'Settings' menu which would have some sort of option to edit your network settings. That's where you would make the change. You would have to get the proper settings from Fido.
startngate said:
Did you change your network settings over to the correct settings for the network of the SIM card you are using?
Unlocking a phone will allow other SIM cards to work, but if you don't change your network settings, then the phone will still try to connect to the Rogers network.
Click to expand...
Click to collapse
If I have the APN set to the one for the network of the SIM Card I am using then will I not get charged roaming?
Is it possible for it to actually be roaming and me not knowing about it?
Hi, Hope someone can help.
I have a Galaxy S I9000 originally locked to O2 but now unlocked. I'm using Giffgaff as my mobile operator who run on the O2 network.
I'm trying to set the voicemail number, in the settings, to Giffgaff which is 443 but it's locked to the carrier with 901. Anyway of changing this.
Thanks
I just purchased a Galaxy Note 3 (SM-N900A), full-price, off-contract, from AT&T Wireless. I used an existing GoPhone (prepaid) account/phone number to activate the phone. The phone works (voice calls) with the AT&T SIM. However, I want to use the phone/device on aioWireless. I have a microSIM for aio. I have purchased an unlock code and followed the unlock instructions. I received a "Successful unlock" message after entering the 8 digit network code. However, I cannot make phone calls (or use the data plan) when the aioWireless SIM is installed. When dialing a number with the aio SIM, I get a recorded message that the service has been deactivated, and to contact AT&T.
When I try to verify whether the phone has truly been unlocked by typing *#SIMLOCK# nothing happens. If I then push the CALL button, I then get the message: Connection problem or invalid MMI code.
Any clues what is going on?
stylecraft said:
I just purchased a Galaxy Note 3 (SM-N900A), full-price, off-contract, from AT&T Wireless. I used an existing GoPhone (prepaid) account/phone number to activate the phone. The phone works (voice calls) with the AT&T SIM. However, I want to use the phone/device on aioWireless. I have a microSIM for aio. I have purchased an unlock code and followed the unlock instructions. I received a "Successful unlock" message after entering the 8 digit network code. However, I cannot make phone calls (or use the data plan) when the aioWireless SIM is installed. When dialing a number with the aio SIM, I get a recorded message that the service has been deactivated, and to contact AT&T.
When I try to verify whether the phone has truly been unlocked by typing *#SIMLOCK# nothing happens. If I then push the CALL button, I then get the message: Connection problem or invalid MMI code.
Any clues what is going on?
Click to expand...
Click to collapse
Do you maybe have to use different APN settings for the two networks?
bigmout said:
Do you maybe have to use different APN settings for the two networks?
Click to expand...
Click to collapse
I have no idea.
I would look up the APN settings for AIO and input those (Settings>Connections>More networks>Mobile networks>Access Point Names)
You could always just call AIO customer service or walk into a store and they should be able to help you out.
Sent from my SAMSUNG-SM-N900A using Tapatalk
bigmout said:
Do you maybe have to use different APN settings for the two networks?
Click to expand...
Click to collapse
I thought APN is just for data and has nothing to do with his inability to place calls! especially that he is getting" service deactivated"
I would check the AIO account if its working first.
stylecraft said:
I just purchased a Galaxy Note 3 (SM-N900A), full-price, off-contract, from AT&T Wireless. I used an existing GoPhone (prepaid) account/phone number to activate the phone. The phone works (voice calls) with the AT&T SIM. However, I want to use the phone/device on aioWireless. I have a microSIM for aio. I have purchased an unlock code and followed the unlock instructions. I received a "Successful unlock" message after entering the 8 digit network code. However, I cannot make phone calls (or use the data plan) when the aioWireless SIM is installed. When dialing a number with the aio SIM, I get a recorded message that the service has been deactivated, and to contact AT&T.
When I try to verify whether the phone has truly been unlocked by typing *#SIMLOCK# nothing happens. If I then push the CALL button, I then get the message: Connection problem or invalid MMI code.
Any clues what is going on?
Click to expand...
Click to collapse
APN is indeed simply meant for DATA and MMS
Your phone is functional with TEXT message and CALL's WITHOUT even a single APN setting set up
The main problem here is compatibility. OR the SIM card
SOMETIMES you have to leave the sim card inside your phone for at least 5- 10 minutes
At one time it took me 20 minutes for a sim card to be recognized, then I got 4G
It depends on the network.
But if all fails, just call your new network and try to get a new sim card
As long as your phone is fully compatible, and you know it, there are ways around it.
Hope this helped!:good:
The *#SIMLOCK# and various variants of it no longer works starting from the GALAXY S3 and Above (Not even all S2's accept this code)
So I recently got a T-Mobile Samsung Galaxy Note 4. As we know, it's unlocked 100% without any special root methods or entering in codes into the dial pad. With that being said, I popped in an LTE Straight Talk SIM card, transferred my old number to the new SIM and configured the APN and for a long while it was working fine with no issues. Then out of the blue, I had no data. It absolutely quit without warning. I go to check the APN settings I had previously and they were gone. I had redone everything and saved the settings. However, when I go back out a menu, no Straight Talk APN. I did the same thing again....and once again no APN settings. Just the default T-Mobile LTE APN.
So I'm at a loss. It was working fine previously and now I cannot set APN settings. I have reset the phone more than once (reluctantly). Any thoughts? Any help would be appreciated since I'm paying those bastards $45 and some change a month for service I cannot get. Also as a note, I can receive and send text messages with no problem. Calling number results in "you are not registered on a network," but I know the fix for that.
blckdragn22 said:
So I recently got a T-Mobile Samsung Galaxy Note 4. As we know, it's unlocked 100% without any special root methods or entering in codes into the dial pad. With that being said, I popped in an LTE Straight Talk SIM card, transferred my old number to the new SIM and configured the APN and for a long while it was working fine with no issues. Then out of the blue, I had no data. It absolutely quit without warning. I go to check the APN settings I had previously and they were gone. I had redone everything and saved the settings. However, when I go back out a menu, no Straight Talk APN. I did the same thing again....and once again no APN settings. Just the default T-Mobile LTE APN.
So I'm at a loss. It was working fine previously and now I cannot set APN settings. I have reset the phone more than once (reluctantly). Any thoughts? Any help would be appreciated since I'm paying those bastards $45 and some change a month for service I cannot get. Also as a note, I can receive and send text messages with no problem. Calling number results in "you are not registered on a network," but I know the fix for that.
Click to expand...
Click to collapse
Try setting the APN with this app https://play.google.com/store/apps/details?id=com.tracfone.straighttalk.stdatasettings
Sounds like your phone got black listed. Did you buy it from Tmobile? If you bought it from some one else it was either a stolen phone or the previous own stopped paying for it.
Sent from my SM-N910T using XDA Free mobile app
ShrekOpher said:
Sounds like your phone got black listed. Did you buy it from Tmobile? If you bought it from some one else it was either a stolen phone or the previous own stopped paying for it.
Click to expand...
Click to collapse
I had bought the phone from a local gas station owner (who had 2 other T-Mobile phones with him). It was working while he showed me the phone (he had gotten several text message and Facebook updates). He then reset it. I bought a Straight Talk SIM kit and went to work. I had working data until the next day. I had played around with some more internal settings, like updating the touch sensitivity and more. Everything was working until I refreshed the Wi-Fi antennae. Don't think that would have anything to do with the 4G/LTE radios or regular antennas. Overall, it was working, so I don't see how it could just magically stop.
Sent from my SM-N910T using XDA Free mobile app
blckdragn22 said:
I had bought the phone from a local gas station owner (who had 2 other T-Mobile phones with him). It was working while he showed me the phone (he had gotten several text message and Facebook updates). He then reset it. I bought a Straight Talk SIM kit and went to work. I had working data until the next day. I had played around with some more internal settings, like updating the touch sensitivity and more. Everything was working until I refreshed the Wi-Fi antennae. Don't think that would have anything to do with the 4G/LTE radios or regular antennas. Overall, it was working, so I don't see how it could just magically stop.
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
If he bought the phone on a lease from T-MOBILE and never fully paid it off T-Mobile would black list it. Or if he sold you a lost\stolen phone.
You can contact T-Mobile or check the IMEI on one of those checker sights to see if it has been blacklisted.
Sent from my SHIELD Tablet using XDA Free mobile app
You can check to see if you're blacklisted by visiting the T-Mobile website and using their IMEI checker. If you're blacklisted you would not be able to place calls. I will attach sample AT&T APN that works for me. I'm on Cricket and not StraightTalk but it may work for you.
For all who helped out on this post, THANK YOU! I figured what my issue was. SIM card is fine and the data settings work as long I don't configure the MCC & MNC settings. Changing the MNC from 260 to 410 is what caused my saved APN to disappear. Not sure why that happens, but if any of you have an idea of why, direct me to the thread that explains this or if you know, quote this reply. And another thing, I am able to send texts and make calls, but due to the location I was in, texts sent at half the speed of smell and making a call was impossible due the phone claiming I was "not on a registered network" even though ST is a network (duh). I have no service issues on my Note 3 N900A when I that. Anyone think it could be because AT&T's device antennas differ from that of a T-Mobile Note 4? Personally, I don't think they would since they are both GSM and operate on the same bands (I would think), even though the Note 4 has "newer" technology. Not really worried about data, texts or calls since I have Wi-Fi in said location.
Again, thanks to those that helped me out. And, again, if anyone has any ideas to the information said above, by all means give your say or direct me to where there is substantial info.
I had it unlocked and was using a T-Mobile sim card, I dial the number and it looks like it will make the call but it doesn't go through. Same thing happened if I try to receive a call it doesn't go through. I already re-flashed the CP NC2 for this model and it didn't do anything. I have z3x box that I just got, is there anything I can do to fix this issue? It does find the T-Mobile network on manual search but doesn't have an effect on the tuning. I also show a line of signal. Thanks in advance guys.
When I try to register the T-Mobil network the reception lines disappear and it looks for network forever.