Hello,
I didn't find on this forum , but how to install TWRP or CWM on my mini2 with ODIN ? I don't have root acces on a stock firmware ..
I was able to install CWM5.0 with odin on my mini2 but when i tried to install a rom i got error7 > searched upgrade of CWM needid ...
So here i am asking for help
ward0 said:
Hello,
I didn't find on this forum , but how to install TWRP or CWM on my mini2 with ODIN ? I don't have root acces on a stock firmware ..
I was able to install CWM5.0 with odin on my mini2 but when i tried to install a rom i got error7 > searched upgrade of CWM needid ...
So here i am asking for help
Click to expand...
Click to collapse
I think i found my problem already , i have to root my phone first before i can run TWRP correct?
I don't find any TAR to install with odin
ward0 said:
I think i found my problem already , i have to root my phone first before i can run TWRP correct?
I don't find any TAR to install with odin
Click to expand...
Click to collapse
So i'm a stup further .. i'm now root Thanks to this guy : http://forum.xda-developers.com/showthread.php?t=1953420&highlight=root
Now can i follow goomanager ( or what ever its called ) and install TWRP by click and install hopefully i can flash back to CM10.1 then
But that will be for tomorrow , now sleepy time!
ward0 said:
So i'm a stup further .. i'm now root Thanks to this guy : http://forum.xda-developers.com/showthread.php?t=1953420&highlight=root
Now can i follow goomanager ( or what ever its called ) and install TWRP by click and install hopefully i can flash back to CM10.1 then
But that will be for tomorrow , now sleepy time!
Click to expand...
Click to collapse
We are back in problems ..
So i flashed CWM with odin > no problems
install from sd > zip > CM10.1 > no problems
reboot telephone > no problems
logo > nothing happening ( probally because i didn't reset calvik cache and other stuff ...
Now i try to boot into CWM but my phone is not booting anymore , i already unplugged sd & sim etc and plugged out battery.
somethims it does boot but i can't get into CWM with volume up + down + home + power ..
Any advice?
ward0 said:
So i'm a stup further .. i'm now root Thanks to this guy : http://forum.xda-developers.com/showthread.php?t=1953420&highlight=root
Now can i follow goomanager ( or what ever its called ) and install TWRP by click and install hopefully i can flash back to CM10.1 then
But that will be for tomorrow , now sleepy time!
Click to expand...
Click to collapse
We are back in problems ..
So i flashed CWM with odin > no problems
install from sd > zip > CM10.1 > no problems
reboot telephone > no problems
logo > nothing happening ( probally because i didn't reset calvik cache and other stuff ...
Now i try to boot into CWM but my phone is not booting anymore , i already unplugged sd & sim etc and plugged out battery.
somethims it does boot but i can't get into CWM with volume up + down + home + power ..
Any advice?
ward0 said:
So i'm a stup further .. i'm now root Thanks to this guy : http://forum.xda-developers.com/showthread.php?t=1953420&highlight=root
Now can i follow goomanager ( or what ever its called ) and install TWRP by click and install hopefully i can flash back to CM10.1 then
But that will be for tomorrow , now sleepy time!
Click to expand...
Click to collapse
We are back! so i flashed CWM cause TWRP didn't work to flash CM10.1 .. after install zip for CM10.1 i'm on the logo boot loop .. After alot of problems to get the phone booting this morning .. i'm finally in download mode again and flashing the stock ROM.. From that point we can root again and try again to install the CM10.1 w/o GAPPS aftwards directly as seen on the internet
ward0 said:
We are back! so i flashed CWM cause TWRP didn't work to flash CM10.1 .. after install zip for CM10.1 i'm on the logo boot loop .. After alot of problems to get the phone booting this morning .. i'm finally in download mode again and flashing the stock ROM.. From that point we can root again and try again to install the CM10.1 w/o GAPPS aftwards directly as seen on the internet
Click to expand...
Click to collapse
Dude, don't answer your thread by YOURSELF.
F4uzan said:
Dude, don't answer your thread by YOURSELF.
Click to expand...
Click to collapse
I don't agree with that , i hope that people who had problem like me will see my tread and will see my solution steps ... If you just say 'yay problem solved' you don't help others.
Related
I have got many request on CWM recoveries flashable via Odin and here we go.
Today I present you Clockwork mod recoveries flash-able via Odin.
Only For those who are interested.....
If you are not interested then please don't start a discussion here saying you ought not have posted this or there's no point on having done this since i really don't have time for all these bullshits.
Click to expand...
Click to collapse
All credit goes to koush for this custom recovery and tj_style and squadzone for making it's utility in GT-S5570 smartphone.
Click to expand...
Click to collapse
Downloads :
Code:
1. CWM-5.0.2.8-Touch2-yagya.tar.md5 [latest CWM touch recovery ].
http://www.mediafire.com/download.php?l43jjb592q0nh5s
2. cwm-touch-5.0.2.8-mini.tar.md5
http://www.mediafire.com/download.php?dbgmlgcfs815hxx
Password : [B]yagyagaire[/B] /* Pass for above downloads.
For instructions on how to install or use these recovery, view post #2.
How to Install CWM Recovery in Galaxy Mini S5570 Smartphone?
So, let's begin. Follow instructions below to install latest cwm recovery in your galaxy mini handset.
Make sure you have got Gingerbread OS on your galaxy mini : Upgrade to GB if you don't have.
Download Odin Multidownloader v4.38 for GTS5570, Tass_v1.ops and latest Clockwork Mod Recovery if you do not have them already. You can download them from here.
Run Odin Multi downloader v4.38 and select the Tass_v1.ops by clicking OPS button.
Select One Package Option and Click One Package button and select the recovery file name (CWM-5.0.2.8-Touch2-yagya.tar.md5) file you downloaded.
Leave other settings to default (i.e. don’t change any other options/settings)
When you are done reboot your phone in download mode (Press Volume Down + Home + Power button to go to download mode)
Connect your phone in download mode to your computer via USB Cable.
When Odin detects your phone (If you see a com port number written in yellow background at the top left, then your phone is detected. View image.), click Start button.
Wait till Odin finishes the job (approx. 3-5 minutes) and when it reports ‘PASS’, you can disconnect your phone.
That's all. You have flashed latest CWM recovery on your device.
Source : This guide is taken from - http://yagyagaire.blogspot.com/2011/09/installing-clock-work-mod-recovery-in.html
Reserved..... Future Use!
what is the pass please
Hi yagya, it is easy just apply update from stock recovery
I've try at 3 of my freind mini .. It works..
I means that Squadzone cwm zip file..
Thanks..peace
Blackground said:
what is the pass please
Click to expand...
Click to collapse
The pass is yagyagaire
I have update the first post too. So, you can see there also.
wanxbotak said:
Hi yagya, it is easy just apply update from stock recovery
I've try at 3 of my freind mini .. It works..
I means that Squadzone cwm zip file..
Thanks..peace
Click to expand...
Click to collapse
I think you misunderstood....
I know it's easy flashing an update directly via CWM recovery. I just posted these since many people asked me to do so.
I guess some users still prefer flashing recovery via Odin unlike you or me.
wanxbotak said:
Hi yagya, it is easy just apply update from stock recovery
I've try at 3 of my freind mini .. It works..
I means that Squadzone cwm zip file..
Thanks..peace
Click to expand...
Click to collapse
It's true. I used that a couple weeks ago.
yagya said:
I think you misunderstood....
I know it's easy flashing an update directly via CWM recovery. I just posted these since many people asked me to do so.
I guess some users still prefer flashing recovery via Odin unlike you or me.
Click to expand...
Click to collapse
Not apply from CWM recovery...
I said from stock Gingerbread recovery..
Just put zip file to sd card (not in folder)
Get in to recovery then just apply update ..
No lappy or desktop needed.. No download mode..
Just bluethoot the zip to my friend, then made it...
Easyest way..
wanxbotak said:
Not apply from CWM recovery...
I said from stock Gingerbread recovery..
Just put zip file to sd card (not in folder)
Get in to recovery then just apply update ..
No lappy or desktop needed.. No download mode..
Just bluethoot the zip to my friend, then made it...
Easyest way..
Click to expand...
Click to collapse
Yea, guyzz. I got you all... I know we can flash CWM updates via recovery but,
let me be clear Some guyz out there still would like to give this a try. So, can we just stay out of this. Those who need will use and those who don't will not.
Why should you or me get a headache for such a small reason?
Hi, with this recovery is possible to make a backup/restore for any rom??
hreyit said:
Hi, with this recovery is possible to make a backup/restore for any rom??
Click to expand...
Click to collapse
Yes, it is...
This is probably the same as squadzone's recovery except that this is to be fashed via Odin.
so where's the changelog of this recovery, what's the advantages that this recovery have?
yagya said:
Yes, it is...
This is probably the same as squadzone's recovery except that this is to be fashed via Odin.
Click to expand...
Click to collapse
Backing up system...
Can't mount /system!
Click to expand...
Click to collapse
Whyyy? i cant make a backup..
This post may confuse newbies.
Posted through xda premium
VR.gtmini said:
This post may confuse newbies.
Posted through xda premium
Click to expand...
Click to collapse
So, I suggest them not to get confused.
It's clearly written/detailed at the OP. So, none should get confused.
hreyit said:
Whyyy? i cant make a backup..
Click to expand...
Click to collapse
Because you are using stock rom. You need custom roms like CM7 for this to work properly. You can get one at http://yagyagaire.blogspot.com and then try again. It will work nicely.
I got an error:
"cannot open the usb serial port. code: 2"
what should I do? Disconnect the phone or wait?
Thank you all.
You will need to close Samsung Kies if you have it installed otherwise install USB drivers from Samsung and try again.
Thanks for your help yagya.
I have rebooted the PC, reconnected the phone and everything worked out perfectly. Now I have CWM installed and running .
Just one question, if I reflash stock ROM on the device trough Kies, will it get rid of CWM or will I still have it?
Hi,
My buddy messed up with his i9001 and the current condition when turn on the device,it show "SAMSUNG" and going directly into CWM recovery wihout me holding the power & vol up.
I've tried format system,wipe etc / partition internal SD and success installing fresh ROM zip from external SD but again it does the same again and again by going into CWM recovery.Also when in CWM recovery if reboot automatically like every 5minutes.
Your help will be appreciated!:cyclops:
Can the phone start into the download mode?
Eddicts said:
Can the phone start into the download mode?
Click to expand...
Click to collapse
Yup!and odin multidownloader recognize the device.I've got into ODIN and selected the ops but i do not know where to get the tar,md rom files. or should i just use odin3?what's the difference anyway?
p/s: i do not know which rom etc it was with before.Read somewhere about PIT but i do not quite get it.I'm in Malaysia.
it's rebooting in cwm recovery.... so you will need to flash bootloader: you cand find in i9001 wiki page at cwm recovery section a link to a single post where you will have all you need to flash bootloader and instructions . Good luck !! :good:
bluehawk20 said:
Also when in CWM recovery if reboot automatically like every 5minutes.
Click to expand...
Click to collapse
you need to follow this http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 To solve your problem use Odin 4.43 with AriesVe.ops and flash a bootloader for other solutions visit My Android solutions, link below
Yup just flash stock rom with ODIN if you cant boot/recover
help
bluehawk20 said:
Hi,
My buddy messed up with his i9001 and the current condition when turn on the device,it show "SAMSUNG" and going directly into CWM recovery wihout me holding the power & vol up.
I've tried format system,wipe etc / partition internal SD and success installing fresh ROM zip from external SD but again it does the same again and again by going into CWM recovery.Also when in CWM recovery if reboot automatically like every 5minutes.
Your help will be appreciated!:cyclops:
Click to expand...
Click to collapse
i am having the same problem... i tried flashing gapps nd aosp after installin cwm... will flashing with odin help??? please tell solution
adisawant said:
i am having the same problem... i tried flashing gapps nd aosp after installin cwm... will flashing with odin help??? please tell solution
Click to expand...
Click to collapse
I'm not sure bumping old topics is a good idea, but if you're having the same issue the same solution would work. Just follow the steps described here.
Hello!
I wanted to flash CM 10.1 on a Galaxy Mini 2, after factory reset,wipe cache and dalvik cache the device just got stuck on recovery.
I tried to flash the CM 10.1 but there is a problem with it, it says "Installation aborted".
Please help me!
Wassupdog said:
Hello!
I wanted to flash CM 10.1 on a Galaxy Mini 2, after factory reset,wipe cache and dalvik cache the device just got stuck on recovery.
I tried to flash the CM 10.1 but there is a problem with it, it says "Installation aborted".
Please help me!
Click to expand...
Click to collapse
Flash with Odin the latest CWM Recovery and flash the rom again!
djfnz said:
Flash with Odin the latest CWM Recovery and flash the rom again!
Click to expand...
Click to collapse
Thanks for the answer!
Can you give me please a download link to the latest CWM please?
Wassupdog said:
Thanks for the answer!
Can you give me please a download link to the latest CWM please?
Click to expand...
Click to collapse
I use this CWM version (not latest but working fine) http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.3-jena.tar.md5
djfnz said:
I use this CWM version (not latest but working fine) http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.3-jena.tar.md5
Click to expand...
Click to collapse
Ty!
djfnz said:
I use this CWM version (not latest but working fine) http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.3-jena.tar.md5
Click to expand...
Click to collapse
The Odin got stuck on SetupConnection (The device is in recovery because I can't exit from it).
What should I do?
Wassupdog said:
The Odin got stuck on SetupConnection (The device is in recovery because I can't exit from it).
What should I do?
Click to expand...
Click to collapse
Open task manager on pc and kill Kyes tasks first before you connect your phone to pc and open odin! (maybe this is your problem with odin flash)
For the recovery stuk put out the batery hold power for 30 sec and pyt it back on and then try go to download mod (it woks for me)
Lol another thread about bootlooop? XD
Enviado desde mi GT-S6500D usando Tapatalk 2
larissamafia said:
Open task manager on pc and kill Kyes tasks first before you connect your phone to pc and open odin! (maybe this is your problem with odin flash)
For the recovery stuk put out the batery hold power for 30 sec and pyt it back on and then try go to download mod (it woks for me)
Click to expand...
Click to collapse
Thank you!
I will try both .
Guys I have same problem and the cwm links do not work for me help!!!
Hi Guys,
I have a 6500 with NFC. I bought it in Europe, so its not the 6500D.
But i think i have a 6500D bootloader
when rooting with odin: it tells me 6500D
when flashing or restoring with other ROMS, it tells me 7500
strange. ha?
but never the less: i cant install the rom from the.wisp.
it stops in the beginning when checking the phone-model
what did you use when rooting with odin?
thnx
freagle05 said:
Hi Guys,
I have a 6500 with NFC. I bought it in Europe, so its not the 6500D.
But i think i have a 6500D bootloader
when rooting with odin: it tells me 6500D
when flashing or restoring with other ROMS, it tells me 7500
strange. ha?
but never the less: i cant install the rom from the.wisp.
it stops in the beginning when checking the phone-model
what did you use when rooting with odin?
thnx
Click to expand...
Click to collapse
Flash latest CWM 6.0.3.3b2 . I think that you use old CWM v5 which have a lot of bugs and problems.
o yes. i am using 5.0.2.8
hang on a sec. i found this here:
http://forum.xda-developers.com/showthread.php?t=2156194
edit:
ok. thank you. i installed a newer version of the tar.md5-file and i could install the rom. thank you.
when i boot the phone it always stays at the cyanogenmod-logo with the circle turning around. it does not boot till the end.
any ideas?
wipe data/factory reset, cache partition and dalvik cache in advanced menu, before and after installation!
larissamafia said:
wipe data/factory reset, cache partition and dalvik cache in advanced menu, before and after installation!
Click to expand...
Click to collapse
okay, i would like to, but i cant get in the recovery-mode anymore. have the buttons changed? i have installed the cwm-6.0.3.3-b2-jena.tar.md5 with odin. now i cant acess recovery???
freagle05 said:
okay, i would like to, but i cant get in the recovery-mode anymore. have the buttons changed? i have installed the cwm-6.0.3.3-b2-jena.tar.md5 with odin. now i cant acess recovery???
Click to expand...
Click to collapse
Try with s7500 combination
but
xfim said:
Try with s7500 combination
Click to expand...
Click to collapse
i did. no change.
i am either stuck in the
- cyanogenmod-logo-circle
- download-mode
- ramdump mode arm9 mode
i cant enter the recovery-mode anymore. pls help...
hi, i found a solution: i installed stock-rom with odin, made a factory-reset and installed everything again. now it works. tnx. im very happy i got rid of the old software. cm looks and feels much better
but i have a few questions with that rom (30.08):
i installed another file-browser because the shipped one doesent see any files on my external sd-card... what could that be?
i sometimes have the whitescreen-problem. i searched for a solution, but there are several out there...?
in the statusbar there is no button for gps? how can i see that?
freagle05 said:
hi, i found a solution: i installed stock-rom with odin, made a factory-reset and installed everything again. now it works. tnx. im very happy i got rid of the old software. cm looks and feels much better
but i have a few questions with that rom (30.08):
i installed another file-browser because the shipped one doesent see any files on my external sd-card... what could that be?
i sometimes have the whitescreen-problem. i searched for a solution, but there are several out there...?
in the statusbar there is no button for gps? how can i see that?
Click to expand...
Click to collapse
im not curently on CM but go to stock file manager > option > you will find some option to enable your sdcard ( sorry i dont remember entirely but im sure there was something there)
about that white screen bug there is nothing that anybody can do , at least not right now .
For browsing ext sd use ES file explorer (go to / and search for folder external SD)
Hey ! I want to install the stock rom for i8190. A long time ago I tried this and i fixed it (in 2 days :laugh , but i don't want to have this problem again.
Hello everyone ! I have a samsung galaxy s3 mini i8190
I flash CM , but i didn't like it so i tried to install with odin the original firmware.
Problem: Bootloop (logo Samsung Galaxy S3 Mini reboot infinite loop)
I can't enter in Recovery Mode, only i can enter in Download Mode
I use ODIN to try to install CWM , but still don't work..
And i have another problem. When I click start (in odin) it stops at SetupConnection, but if I disconnect & reconnect (usb) it starts flashing.
Please, help me.
Click to expand...
Click to collapse
Link to the post click
So , can you help me to don't have this problem again?
// a tutorial maybe..
Vladdyak47 said:
Hey ! I want to install the stock rom for i8190. A long time ago I tried this and i fixed it (in 2 days :laugh , but i don't want to have this problem again.
Link to the post click
So , can you help me to don't have this problem again?
// a tutorial maybe..
Click to expand...
Click to collapse
i thought your problem was solved? anyway, maybe you need to install the usb drivers download here: http://get.maclaw.pl/?id=61
do you want to flash the original stock-rom or a stock based custom-rom?
Vladdyak47 said:
Hey ! I want to install the stock rom for i8190. A long time ago I tried this and i fixed it (in 2 days :laugh , but i don't want to have this problem again.
Link to the post click
So , can you help me to don't have this problem again?
// a tutorial maybe..
Click to expand...
Click to collapse
Hey need to factory reset every time dont forget to install 3 way reovery ok
Aloha Joe said:
do you want to flash the original stock-rom or a stock based custom-rom?
Click to expand...
Click to collapse
original stock rom
eswarvf said:
Hey need to factory reset every time dont forget to install 3 way reovery ok
Click to expand...
Click to collapse
What's 3 way recovery ?
Before I flash the original stock rom i have to stock recovery from benz0nator? ( url=http://forum.xda-developers.com/showthread.php?t=2150822]click[/url] )
Vladdyak47 said:
original stock rom
What's 3 way recovery ?
Before I flash the original stock rom i have to stock recovery from benz0nator? ( url=http://forum.xda-developers.com/showthread.php?t=2150822]click[/url] )
Click to expand...
Click to collapse
No use cwm or twrp [recommended by devs here ] and three way recovery is over here
eswarvf said:
No use cwm or twrp [recommended by devs here ] and three way recovery is over here
Click to expand...
Click to collapse
I read the comments in that topic. After this, I must use TriangleAway for binary reset?
So just flash ( i8190_buttonenable_cwm6.0.2.7.tar or i8190_buttonenable_cwm6.0.2.7.tar.md5_.zip i don't know who, please tell me) and after this
flash with odin original stock rom?