Yesterday I made the root of HTC with Toolkit .. today I wanted to hack the buttons and the logo .. I follow the procedure ... and the phone will not start.
I try the normal procedures .. but nothing .. when I think .. "maybe the buttons are now active and maybe if you use them how to use the volume down key work .." (you know the madness? here!) So I tried .. and what happened .. that.. holding down power button and the soft key at the right of the logo almost immediately lit up .. the screen with the green logo .. but when i take off the finger from the power .. down agian! So I redid the procedure and never give up power .. and remained as in stand by .. then I tried to touch a long time (a few seconds) the logo and the button on the right and the screen responded switching on and off .. so I pressed volume down and I'm in recovery .. then i'm going faster in some forums for find anyone that help me to recovery to STOCK my phone.. and one person told me to install a stock .. from that point (on bootloader) .. i use an EXE file .. 1gb file .. a Stock Rom RUU .. I did, it seemed gone, and respond to commands from the software .. but at the end of the procedure is not successful, saying that the ROM was wrong ERROR 155 .. remained the black screen with HTC logo .. Then I tried again .. and software told me that the procedure was failed and to shut down and try again. From this point my phone HTC ONE European .. doesn't work.. only the soft key intermitted flashing when i hold on the power button.. for 1 secondo or 3 minute.. nothing happen.
Someone can help me?
Related
OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !
Reset, enter bootloader, reflash
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader
just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C
Flashed DID diamond+sprint rom and my phone is stuck in the Touchdiamond screen when it vibrateds first can anyone help me..
tried a Hard Reset?
(hold down center button and volume down while pressing reset for 3 secs)
Yeah thats the first thing i did..no luck just goes back to the start screen.
can u get to Bootloader?
Not sure how to get there..
umm.. Volume key up and reset i think (if not check Wiki)
once in Bootloader you can connect to PC and try flashing ROM again
if this doesnt work, try flashing original ROM (same process) and try a different version of Hard SPL. have u flashed other ROMS ok before?
It use to go in bootloader shen i pushed volume dwn, power button and enter botton..not doing it now..
its Volume Down and reset - my bad
Got to chip off now, good luck with it PM me and i'll see it tomrrow if u still got problems
No luck i have tried everything stuck in this loop anyone have anyother sugjestions
I can get it to go to the hard reset screen but that itanyonter way to force it into bootloader the direction in the manuel are different from what wiki says..
So is it bricked?
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???
try to hard reset first... then try to charge the new ROM.
wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!
HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes
maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again
to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.
Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally
i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.
I tried to unlock my diamond, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ppcgeeks.com/Diamond/Users/Tob...20Unlocker.rar[/url]
Yep, just did the same.. Got an error that it was the wrong model id at the end. Now i cant enter bootloader, its a brick.
http://forum.ppcgeeks.com/showthread.php?t=36062
Have you tried going back into bootloader via the power button and volume down?
I have the same problem.
Did you solve it or not?
If you did what did you done?
you can not solve this problem my friend becouse i made the same thing and the phone is dead....I just found some litle informations in my searches and it can be done only by jtag mode
so if u are an expert and if u have a programmer u maybe can do this.....
here is the link : http://forum.revskills.de/viewtopic.php?f=25&t=117[/URL]
Maybe Ill can Help
Once i stuck in the boot of my phone in a rom everytime i turned it on ? oO but i solved the problem (after 2 ****in weekz without phone)
But this is what i Did
Ill simply pressed this at same time(Vol down, reset button & back arrow)
and deleted the which deleted the old OS backup (your phone still works)
and then i turned it off and pressed the same combo again
which will turn your phone in USB mode then put it into ur PC u maybe wont see it but that doesnt matter the same happened 2 me just go 2 HTC website from ur country and download the latest ROM update they got and let it load into and when ur done just reset ur phone and everything should be OK u can just load a new custom rom (Note u need HardSPL Installed i do not think u can do without ) just PM me if u need more help
blackster said:
Once i stuck in the boot of my phone in a rom everytime i turned it on ? oO but i solved the problem (after 2 ****in weekz without phone)
But this is what i Did
Ill simply pressed this at same time(Vol down, reset button & back arrow)
and deleted the which deleted the old OS backup (your phone still works)
and then i turned it off and pressed the same combo again
which will turn your phone in USB mode then put it into ur PC u maybe wont see it but that doesnt matter the same happened 2 me just go 2 HTC website from ur country and download the latest ROM update they got and let it load into and when ur done just reset ur phone and everything should be OK u can just load a new custom rom (Note u need HardSPL Installed i do not think u can do without ) just PM me if u need more help
Click to expand...
Click to collapse
I tried this with mine and it did nothing. Anyone else have any ideas?
thanks.
EDIT: I got mine working by pressing Power + Vol Dwn + Enter (circle button) + reset and hold them till the screen turns white. then follow the steps on the screen.
I charged my htc one mini 2 (m8 mini) at night and in the mornig It wasn't work. My device is not rooted or not s-off, so it is factory stock. Pressing power button is not working, when i choose recovery on hboot menu, device restarts and stucks black screen and shows me red interjection mark screen, then i press volume up+power button, it says "device CW install: can not found Data". If I choose factory reset on hboot, it is being the same thing ( restarts and stucks black screen and shows me red interjection mark screen, then i press volume up+power button, it says "device CW install: can not found Data"). I don't know what to do please help Thanks a lot.
it is urgend guys help pleasee !!
blu3sm4n said:
it is urgend guys help pleasee !!
Click to expand...
Click to collapse
you not the first one this happens too. you phone lost all its data.
1- Send to HTC for repair (usually FREE)
2- Fix it yourself using tools provided in this forum.
Could you send me a link or the names of the tools dude ? I tried to install stock rom ruu using cmd command but it didnt work. I download the ruu zip file but i can not open with winrar. it says the file is broken or something.
[removed due insult]
If you don't have any solution shut up !! Is there anybody who can help ??