My xperia z thinks it's Galaxy Nexus - Xperia Z Q&A, Help & Troubleshooting

Hi guys, i bought phone off ebay and under model number it says: "Galaxy Nexus". Everything works fine, it has all Sony features and is definitely not a galaxy nexus .
I know i need root to change build.prop, but i can't achieve it since doomlord's tool says galaxy nexus is not supported. (it's 6602 on 10.3.A.0.423 firmware btw)
Here's what it says:
Device detected: Galaxy Nexus (10.3.A.0.423)
Galaxy Nexus (10.3.A.0.423) is not supported.
You need to manage to get remap_pfn_range addresses.
Click to expand...
Click to collapse
Unlocking bootloader and reflashing tft is not an option for me, since i still want to preserve TA partition.
P.S.
doomlord if by any chance you're reading this, can you please add exception to your tool for it to accept Galaxy Nexus (10.3.A.0.423) and send it to me?

Try to reflash the firmware with flashtool.

I'm trying to do that, but phone restarts in about 20 seconds when it's in flashmode.
Flashtool is still unpacking firmware when phone already reboot by itself. I have all drivers installed correctly and am using windows 8.
Maybe that's the problem?

Nikoloz17 said:
I'm trying to do that, but phone restarts in about 20 seconds when it's in flashmode.
Flashtool is still unpacking firmware when phone already reboot by itself. I have all drivers installed correctly and am using windows 8.
Maybe that's the problem?
Click to expand...
Click to collapse
I'm not sure if u r doing this, but connect the phone only when the pop-up appears asking you to "Connect your phone in Flashmode" i.e. Phone switched off ,Volume Down button & then connect the USB.

I'm doing that, but it still restarts by itself after a while
03/037/2013 23:37:47 - INFO - <- This level is successfully initialized
03/037/2013 23:37:47 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
03/037/2013 23:37:52 - INFO - Device disconnected
03/038/2013 23:38:01 - INFO - Selected sony xperia z / 10.3.A.0.423 / C6602
03/038/2013 23:38:02 - INFO - Preparing files for flashing
03/039/2013 23:39:16 - INFO - Please connect your device into flashmode.
03/039/2013 23:39:22 - INFO - Device connected in flash mode
03/040/2013 23:40:23 - INFO - Device disconnected
Click to expand...
Click to collapse

Nikoloz17 said:
I'm doing that, but it still restarts by itself after a while
Click to expand...
Click to collapse
Instead of a normal power off,try a hard reset i.e. Hold Volume up & Power Button for 15 seconds.Release when u feel 3 vibrations.Then try to flash again.

thanks for such swift responses guys.
But i still got the same problem. Flashtool sees it, does nothing and after a while phone restarts.

Nikoloz17 said:
thanks for such swift responses guys.
But i still got the same problem. Flashtool sees it, does nothing and after a while phone restarts.
Click to expand...
Click to collapse
I'm sorry but I'm just trying to help u out with my limited knowledge.
Your Flashtool seems like an old/beta version.Get the latest here
http://www.flashtool.net/download.html
The one that says: Windows Edition : v0.9.11.0 – MD5 : A0F880F3CF420A31D86026F49A2013D7

thanks a lot. That solved it

Nikoloz17 said:
thanks a lot. That solved it
Click to expand...
Click to collapse
Glad I could help.

Related

(SOLVED) Phone disconnects from flashmode shortly after connecting.

Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
smash_07 said:
Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
Click to expand...
Click to collapse
Which version of flashtool are you using?
Sent from my C6602 using xda premium
gire.prasad said:
Which version of flashtool are you using?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
I'm using flashtool 0.9.10.1 on Windows 8 64-bit.
EDIT: Here's a log that may help
19/002/2013 04:02:35 - INFO - <- This level is successfully initialized
19/002/2013 04:02:35 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
19/002/2013 04:02:35 - INFO - You can drag and drop ftf files here to start flashing them
19/002/2013 04:02:40 - INFO - Device disconnected
19/003/2013 04:03:05 - INFO - Selected C6603_Generic Uk_No Branding.ftf
19/003/2013 04:03:05 - INFO - Preparing files for flashing
19/005/2013 04:05:46 - INFO - Please connect your device into flashmode.
19/006/2013 04:06:02 - INFO - Device connected in flash mode
19/006/2013 04:06:02 - INFO - Opening device for R/W
19/006/2013 04:06:02 - INFO - Reading device information
19/006/2013 04:06:02 - INFO - Phone ready for flashmode operations.
19/006/2013 04:06:02 - INFO - Current device : C6603 - CB5A1PKLNS - 1270-6350_R8A - 1269-5309_10.1.A.1.350 - GLOBAL-LTE_10.1.A.1.350
19/006/2013 04:06:02 - INFO - Start Flashing
19/006/2013 04:06:02 - INFO - Processing loader
19/006/2013 04:06:02 - INFO - Checking header
19/006/2013 04:06:02 - INFO - Flashing data
(It doesn't get pass this step and stays at 0%)
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
smash_07 said:
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
Click to expand...
Click to collapse
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
gire.prasad said:
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
smash_07 install pc companion and go through the steps for doing a software repair it will install the drivers, as the drivers dont always install properly from the flashtool drivers folder even though it says there installed, once the s1 boot drivers have installed cancel the software repair and then open flashtool and go through the normal steps and you should find it'll start flashing the software for you, as I had problems like you until I did what I posted, also make sure there is no other sony apps running as that can stop the flash from starting.
Sent from my C6603 using xda app-developers app
smash_07 said:
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
Click to expand...
Click to collapse
Confused, it is normal that it gets disconnected after some time but it is so peculiar that it disconnects so fast! Try the solution posted by the other guy and share the solution, ll figure out another way if it fails
Ps: Before starting flashtool make sure that adb isn't running. Open task manager in windows, kill adb.exe if present and then open flashtool, follow the guide I posted earlier and when the part comes that the preparation of files is complete and when you connect your device, make sure that none of sony related apps are running (sus, pcc, emma). If they do, EXIT them first (closing them will minimise them to system tray so exit them from there). This also can be done before opening flashtool.
Sent from my C6602 using xda premium
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
smash_07 said:
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
Click to expand...
Click to collapse
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
shadowboy23 said:
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
Click to expand...
Click to collapse
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
smash_07 said:
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
Click to expand...
Click to collapse
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
shadowboy23 said:
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
Click to expand...
Click to collapse
I tried both ways, with the flashtool drivers and pc companion ones.
Am confused, 30 secs is more than enough to start the flashing process, are you saying that the flashing doesn't start in 30 secs? If so, that's why I told you not to connect the phone at start and after the preparation of files is complete and when it asks you to connect, try connecting and immediately the process should begin. Even if you have connected the device before, no probs. Flashtool don't need the phone till preparation of files is complete, so you disconnect whenever befor you want, the time where it pops a popup asking you to connect the device (shows an animation) is where you should properly conmect and leave it aside. It will and it should start immediately
Sent from my C6602 using xda premium
Got the problem!
It was the firmware package that is corrupted. I tried using the UK .434 instead and it flashed with no problems or hickups. So the drivers and the phone were working well all along and the problem was where we less expected, in the firmware package.
I got the UK .350 firmware from here so there must be an error that has to be addressed with it.
Many thanks for your help
Glad you made it, cheers!
Sent from my C6602 using xda premium
I found that running the 32 bit version of Flashtool solves the problem as well.
me too but my phone is TX, using flashtool 0.9.19.8
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!
hey i am having same problem with sony xperia m dual c2004. During flashing in flashtool 0.9.13-22 all version tried i got same error 31 (A device attached is not functioning). Problem is my device auto disconnect after 30 second and reconnect in 3 second and this process goes in loop. On usb connect green led blink once and than no light for 30 second. My device is not functioning it has bootloop issue. Tried ftf files version 15.1.A.1.5 and 15.1.A.2.5 both give same results. Is this a hardware problem or i am doing some mistake. Please give me solution i am new here. Thanks in advance...

[SOLVED][Q] Xperia T Semi or hard brick?

Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??
Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium
gregbradley said:
Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Thanks, will try. Should the battery be completely drained or full to try the PC Companion method?
Full
Sent from my LT30p using xda premium
Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?
matt4321 said:
Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?
Click to expand...
Click to collapse
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.
AsinineWazzo said:
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.
Click to expand...
Click to collapse
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?
matt4321 said:
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?
Click to expand...
Click to collapse
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.
AsinineWazzo said:
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.
Click to expand...
Click to collapse
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?
matt4321 said:
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?
Click to expand...
Click to collapse
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.
AsinineWazzo said:
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.
Click to expand...
Click to collapse
you're getting into flashtool, you'll be fine.
that's fine, when it does that, just take the phone out and connect again.
mine does this so it's normal.
Try, putting the FTF in first, then click ok or whatever to flash, then it'll say connect the phone, so connect the phone
You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium
gregbradley said:
You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145
AsinineWazzo said:
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145
Click to expand...
Click to collapse
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.
gregbradley said:
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.
Click to expand...
Click to collapse
Cool, I now have JB rooted thanks to you guys and the Doomlord v18 easy rooting toolkit.
AsinineWazzo said:
Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??
Click to expand...
Click to collapse
better you give it a try to flash the stock FTF... pretty sure it will work... :good:
MalithMax said:
better you give it a try to flash the stock FTF... pretty sure it will work... :good:
Click to expand...
Click to collapse
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium
gregbradley said:
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
so ???? does it make any big effect ?
MalithMax said:
so ???? does it make any big effect ?
Click to expand...
Click to collapse
gregbradley said:
Click to expand...
Click to collapse
haha lol.. OK :silly:

[Q] Error while using flashtool

I have the latest build and i'm trying to downgrade it but i have an error while flashing it. Here's the error.
ERROR - Processing of loader.sin finished with errors.
Can't seem to find the problem. I've redownload and tried other roms but its still the same.
My process is i will open the flash tool and flash the tft file then wait for a message to pop up then i will press volume down and insert the USB.
But i've seened in the tutorial that i have to first press volume down and insert the USB before flashing. But when i used that method my phone will open by itself.
n0p4rk1ng said:
I have the latest build and i'm trying to downgrade it but i have an error while flashing it. Here's the error.
ERROR - Processing of loader.sin finished with errors.
Can't seem to find the problem. I've redownload and tried other roms but its still the same.
My process is i will open the flash tool and flash the tft file then wait for a message to pop up then i will press volume down and insert the USB.
But i've seened in the tutorial that i have to first press volume down and insert the USB before flashing. But when i used that method my phone will open by itself.
Click to expand...
Click to collapse
do you installed drivers for your phone ?
Ben Ling said:
do you installed drivers for your phone ?
Click to expand...
Click to collapse
Yes i did. I've installed it in flashtool folder..
n0p4rk1ng said:
Yes i did. I've installed it in flashtool folder..
Click to expand...
Click to collapse
how about importing your device in the flashtool settings ?
Ben Ling said:
do you installed drivers for your phone ?
Click to expand...
Click to collapse
And do i need to have my bootloader unlocked first before doing that? i have a 4.3 device.
n0p4rk1ng said:
And do i need to have my bootloader unlocked first before doing that? i have a 4.3 device.
Click to expand...
Click to collapse
nope you don't need
Ben Ling said:
how about importing your device in the flashtool settings ?
Click to expand...
Click to collapse
It says no device to import? Do i need to flash mode first?
Ben Ling said:
how about importing your device in the flashtool settings ?
Click to expand...
Click to collapse
It is still the same..
U said that you press volume down and connect USB right. The method is volume down + power button and connect USB. Try that.
Sent from my C6603 using XDA Premium 4 mobile app
dj_richard05 said:
U said that you press volume down and connect USB right. The method is volume down + power button and connect USB. Try that.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is incorrect. You only hold volume down for flashmode.
Sent from my C6603 using Tapatalk
I've tried everything but i always got this error
04/033/2014 11:33:54 - INFO - Preparing files for flashing
04/035/2014 11:35:43 - INFO - Please connect your device into flashmode.
04/035/2014 11:35:55 - INFO - Device connected in flash mode
04/035/2014 11:35:55 - INFO - Opening device for R/W
04/035/2014 11:35:55 - INFO - Start Flashing
04/035/2014 11:35:55 - INFO - Processing loader.sin
04/035/2014 11:35:55 - INFO - Checking header
04/035/2014 11:35:55 - ERROR - Processing of loader.sin finished with errors.
04/035/2014 11:35:55 - INFO - Ending flash session
04/035/2014 11:35:55 - ERROR -
04/035/2014 11:35:55 - ERROR - Error flashing. Aborted
Hope someone could help me..
Try flashtool version 0.9.13
Sent from my C5303 using XDA Premium 4 mobile app
n0p4rk1ng said:
I have the latest build and i'm trying to downgrade it but i have an error while flashing it. Here's the error.
ERROR - Processing of loader.sin finished with errors.
Can't seem to find the problem. I've redownload and tried other roms but its still the same.
My process is i will open the flash tool and flash the tft file then wait for a message to pop up then i will press volume down and insert the USB.
But i've seened in the tutorial that i have to first press volume down and insert the USB before flashing. But when i used that method my phone will open by itself.
Click to expand...
Click to collapse
What model are you using(Xperia Z)
Hit thanks if helped
androidtweaker1 said:
What model are you using(Xperia Z)
Hit thanks if helped
Click to expand...
Click to collapse
C6603.. Hey, i'm trying to fastboot my device so i can unlock my bootloader. But when the driver is installing on my computer. It fails. And when i look into the Device Manager of my computer. The Sony ADB Interface has a yellow exclamation. I think that's the reason why i can't flash or fastboot
n0p4rk1ng said:
C6603.. Hey, i'm trying to fastboot my device so i can unlock my bootloader. But when the driver is installing on my computer. It fails. And when i look into the Device Manager of my computer. The Sony ADB Interface has a yellow exclamation. I think that's the reason why i can't flash or fastboot
Click to expand...
Click to collapse
To install fastboot drivers install flashtool
http://www.flashtool.net/download.php
after installation navigate to flashtool folder in c drive, open driver folder
run the flashtool drivers setup, select flash mode and fast boot drivers and finish installation
put your phone in fastboot mode it will install the drivers automatically
Check USB Debugging is ON ? otherwise it wont work
USB debugging does not have to be activated to flash an FTF. Flashtool uses the same protocol as the official Sony Update Service and that doesn't require USB debugging to be activated.
How do you think you can flash on phones that don't even have anything on /system?
Sent from my C6603 using Tapatalk
kingvortex said:
USB debugging does not have to be activated to flash an FTF. Flashtool uses the same protocol as the official Sony Update Service and that doesn't require USB debugging to be activated.
How do you think you can flash on phones that don't even have anything on /system?
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I tried flashing 4.4.2 on my 4.3 device and it was giving me the same error .. .When i Switched on USB Debugging , it fixed my problem ...
Coincidence. I've flashed roms on phones that haven't even had the developer options activated. USB debugging is only if you need to use ADB.
If it fixes the problem, then great, but there's no reason why it should and it would confuse me greatly if it did.
Sent from my C6603 using Tapatalk
kingvortex said:
Coincidence. I've flashed roms on phones that haven't even had the developer options activated. USB debugging is only if you need to use ADB.
If it fixes the problem, then great, but there's no reason why it should and it would confuse me greatly if it did.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
As the matter of fact the usb debugging thing is true in my case as well but after it conects I am getting this error
29/042/2014 12:42:45 - ERROR - Error flashing. Aborted
29/042/2014 12:42:46 - ERROR - Drivers need to be installed for connected device.
29/042/2014 12:42:46 - ERROR - You can find them in the drivers folder of Flashtool.
I have installed drivers from drivers folder though

Hard Bricked Z3compact

Hi evryone.
I was trying to install cyanogenmod on my phone, but after getting the root acess, when i tried to to install it, it said that there was some kind of problem because the nightly rom i had on my Sd wasnt the right one for my model.
I wanted to place the links for the cyanogenmod rom i downloaded and the tutorial i followed to install it, but since this is my first post, XDA doesnt allow me to place any outside links.
Now whenever i boot my phone it stops on the Sony experia screen and it doens do anything else. No other menus. Just the Sony screen. The only command it receives is the Power and Vol up to turn it down again.
Please, is there any solution? Is my phone 100% bricked? Is there anyway to connect it to the pc and place the Xperia original files/rom manually??
I sent an email to sony even tough i know my warranty is voided. I have had some other problems with their assistence so i dont expect much help.
I just cant afford another selfphone and my mother´ll be super mad if i tell her i bricked it.
Thank you.
Pedrogm97 said:
Hi evryone.
I was trying to install cyanogenmod on my phone, but after getting the root acess, when i tried to to install it, it said that there was some kind of problem because the nightly rom i had on my Sd wasnt the right one for my model.
I wanted to place the links for the cyanogenmod rom i downloaded and the tutorial i followed to install it, but since this is my first post, XDA doesnt allow me to place any outside links.
Now whenever i boot my phone it stops on the Sony experia screen and it doens do anything else. No other menus. Just the Sony screen. The only command it receives is the Power and Vol up to turn it down again.
Please, is there any solution? Is my phone 100% bricked? Is there anyway to connect it to the pc and place the Xperia original files/rom manually??
I sent an email to sony even tough i know my warranty is voided. I have had some other problems with their assistence so i dont expect much help.
I just cant afford another selfphone and my mother´ll be super mad if i tell her i bricked it.
Thank you.
Click to expand...
Click to collapse
This is becoming common
It is only a soft brick DO NOT WORRY - I have also done this, and seems most common with older versions of TWRP
Download flashtool and download a .ftf file from HERE (anyone will do they are all the same)
now open up flashtool and it will tell you to move files from *folder* to *.flashtool folder* also place the .ftf file in the new folder
now click the lightning symbol - flashmode
click the firmware you downloaded
and click flash
now on your device hold down the POWER + VOLUME buttons until the device vibrates 3 times (this will turn it off)
hold the VOLUME DOWN ( & nothing else - make sure the phone is off for this) while holding vol down, plug the phone into the computer. You should see the led turn red then green/blue
flashtool will now see the device in flashmode and flash the firmware (when the firmware has been read by flashtool)
nzzane said:
This is becoming common
It is only a soft brick DO NOT WORRY - I have also done this, and seems most common with older versions of TWRP
Download flashtool and download a .ftf file from HERE (anyone will do they are all the same)
now open up flashtool and it will tell you to move files from *folder* to *.flashtool folder* also place the .ftf file in the new folder
now click the lightning symbol - flashmode
click the firmware you downloaded
and click flash
now on your device hold down the POWER + VOLUME buttons until the device vibrates 3 times (this will turn it off)
hold the VOLUME DOWN ( & nothing else - make sure the phone is off for this) while holding vol down, plug the phone into the computer. You should see the led turn red then green/blue
flashtool will now see the device in flashmode and flash the firmware (when the firmware has been read by flashtool)
Click to expand...
Click to collapse
I am now downloading the files. Thank you so much for your help.
I think it is important to mention that I have formatted the internal storage. and wiped the data and user cache. The error message saying it wasnt the right rom appeard after e formatted it. Is this still a soft brick? :/
Pedrogm97 said:
I am now downloading the files. Thank you so much for your help.
I think it is important to mention that I have formatted the internal storage. and wiped the data and user cache. The error message saying it wasnt the right rom appeard after e formatted it. Is this still a soft brick? :/
Click to expand...
Click to collapse
Yep, from experience I don't think it is actually possible to hard brick the Z3C (I might be wrong)
If the device still reboots when the volume buttons are pressed, your phone is recoverable <--- Soft Brick
If the device is on a black screen and it won't reboot, the phone is not recoverable <--- Hard Brick
nzzane said:
This is becoming common
It is only a soft brick DO NOT WORRY - I have also done this, and seems most common with older versions of TWRP
Download flashtool and download a .ftf file from HERE (anyone will do they are all the same)
now open up flashtool and it will tell you to move files from *folder* to *.flashtool folder* also place the .ftf file in the new folder
now click the lightning symbol - flashmode
click the firmware you downloaded
and click flash
now on your device hold down the POWER + VOLUME buttons until the device vibrates 3 times (this will turn it off)
hold the VOLUME DOWN ( & nothing else - make sure the phone is off for this) while holding vol down, plug the phone into the computer. You should see the led turn red then green/blue
flashtool will now see the device in flashmode and flash the firmware (when the firmware has been read by flashtool)
Click to expand...
Click to collapse
It worked. Thank you so much.
nzzane said:
This is becoming common
It is only a soft brick DO NOT WORRY - I have also done this, and seems most common with older versions of TWRP
Download flashtool and download a .ftf file from HERE (anyone will do they are all the same)
now open up flashtool and it will tell you to move files from *folder* to *.flashtool folder* also place the .ftf file in the new folder
now click the lightning symbol - flashmode
click the firmware you downloaded
and click flash
now on your device hold down the POWER + VOLUME buttons until the device vibrates 3 times (this will turn it off)
hold the VOLUME DOWN ( & nothing else - make sure the phone is off for this) while holding vol down, plug the phone into the computer. You should see the led turn red then green/blue
flashtool will now see the device in flashmode and flash the firmware (when the firmware has been read by flashtool)
Click to expand...
Click to collapse
I think important and useful steps and tutorials like these should be gathered in a FAQ thread and be sticked. All frequent problems and solutions are all over the place and we need such tutorials an solutions in an easy accesible place.
I think I really hard-bricked my Z3C... flashed a recovery with TWRP, which got a custom theme with extra features (able to flash .img files) made by @z31s1g. Now my device won't reboot nor enter flash mode or fastboot mode - just red LED is blinking when connecting to USB, screen is black (no Sony logo or anything). When trying to boot it vibrates one time, but doesn't do anything...
Any chance to get it working again without sending it to Sony?
Edit:
Sony sent me a new phone, did not have to pay anything, as it seems they couldn't repair it and weren't even able to recognize that my TA was deleted... So got it as a warranty "repair".
What?!?! Ive been reading it all wrong, i can get a new phone for making a problem, as they dont care about their own faults
btw how did you brick it? just curious for developement
iKevinShah said:
I have the very same issue, will it work ? I guess NO. What else can we do to fix this ?
Click to expand...
Click to collapse
Same thing happened to me. I downloaded an older version of flashtool (0.9.18.6) because I couldn't get the newer versions to work and I flashed a stock kitkat rom: http://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706 (Specifically the "23.0.A.2.93 - Unbranded - USA (1289-7524)" version - make sure you get the right version for your model). With this process, you don't need to turn your phone on. Just make sure you know how to use flashtool correctly.
That's all I did. Let me know if it doesn't work.
munch2477 said:
Same thing happened to me. I downloaded an older version of flashtool (0.9.18.6) because I couldn't get the newer versions to work
Click to expand...
Click to collapse
Did it complain about not being able to find drivers for your device? That's what it says when I plug my Z3c in. And I've attempted to install drivers using the drivers tool in flashtool/drivers/.
Organized_Chaos said:
Did it complain about not being able to find drivers for your device? That's what it says when I plug my Z3c in. And I've attempted to install drivers using the drivers tool in flashtool/drivers/.
Click to expand...
Click to collapse
I created an account to say that this method works. However, using flashtool (using windows 10) can create a small problem because on mine (at least at the start) the drivers would not load. The workout involves going to advanced startup and getting windows to boot without driver signing. I'm sure that you can download something that permanently disables it, also. Using that, I was able to install every driver without a problem. Just be sure to reboot normally or you might run into issues when flashing (I was unable to flash properly until I restarted).
nzzane said:
This is becoming common
It is only a soft brick DO NOT WORRY - I have also done this, and seems most common with older versions of TWRP
Download flashtool and download a .ftf file from HERE (anyone will do they are all the same)
now open up flashtool and it will tell you to move files from *folder* to *.flashtool folder* also place the .ftf file in the new folder
now click the lightning symbol - flashmode
click the firmware you downloaded
and click flash
now on your device hold down the POWER + VOLUME buttons until the device vibrates 3 times (this will turn it off)
hold the VOLUME DOWN ( & nothing else - make sure the phone is off for this) while holding vol down, plug the phone into the computer. You should see the led turn red then green/blue
flashtool will now see the device in flashmode and flash the firmware (when the firmware has been read by flashtool)
Click to expand...
Click to collapse
Thanks! This worked! Any idea on how to avoid getting stuck in this loop while rooting the phone?
Hi Guys,
Unfortunately, I think I'm closer to the subject title: HardBricked
My compact Z3 is completely bricked ... due to severe, numerous & disorganized flash.
- No boot at all: backlight but no display.
- No more access to fastboot or TWRP recovery
- FlashTool and its flashmode seem to work: I manage to block / unblock the bootloader,
- But flashing does not work.
I'm under Gnu/Linux, but I'Ve tried with Win7 (drivers Ok) with the same result.
Here is FlashTool log:
Code:
29/054/2017 02:54:55 - INFO - Device connected in flash mode
29/055/2017 02:55:24 - INFO - Selected Bundle for Sony Xperia Z3 Compact(D5803). FW release : 23.5.A.1.291. Customization : Customized CE1
29/055/2017 02:55:24 - INFO - Preparing files for flashing
29/055/2017 02:55:55 - INFO - Device disconnected
29/056/2017 02:56:10 - INFO - Please connect your device into flashmode.
29/056/2017 02:56:31 - INFO - Device connected in flash mode
29/056/2017 02:56:31 - INFO - Opening device for R/W
29/056/2017 02:56:31 - INFO - Device ready for R/W.
29/056/2017 02:56:31 - INFO - Reading device information
29/056/2017 02:56:31 - INFO - Phone ready for flashmode operations.
29/056/2017 02:56:31 - INFO - Opening TA partition 2
29/056/2017 02:56:31 - INFO - Current device : Unknown: Jul 24 2016/19:28:59 - YT911288R4 - Unknown: Jul 24 2016/19:28:59 - Unknown: Jul 24 2016/19:28:59 - Unknown: Jul 24 2016/19:28:59
29/056/2017 02:56:31 - INFO - Closing TA partition
29/056/2017 02:56:31 - INFO - Start Flashing
29/056/2017 02:56:31 - INFO - Processing loader.sin
29/056/2017 02:56:31 - INFO - Checking header
29/056/2017 02:56:31 - INFO - Flashing data
29/056/2017 02:56:32 - INFO - Loader : S1_Root_9c84 - Version : MSM8974AB_27 / Boot version : S1_Boot_MSM8974AC_LA3.0_Hero_23 / Bootloader status : ROOTED
29/056/2017 02:56:32 - INFO - Max packet size set to 512K
29/056/2017 02:56:32 - INFO - USB buffer size set to 512K
29/056/2017 02:56:34 - INFO - Parsing boot delivery
29/056/2017 02:56:34 - INFO - Ending flash session
29/056/2017 02:56:34 - ERROR - null
29/056/2017 02:56:34 - ERROR - Error flashing. Aborted
29/056/2017 02:56:34 - INFO - Device connected in flash mode
29/056/2017 02:56:35 - INFO - Device disconnected
What's your opinion?
Any advice?
Thanks in advance & pardon my english
Solved!
Ok! I finally solved my problem using the previous version of flashtool (0.9.18.6):laugh:
I read this somewhere but did not believe it:angel:
Hope it could help!
Thanx again, all, for sharing & developement
J./
Hi
Can someone suggest a way fwd, I have an z3c I was trying to press back into life with an OS new enough for messenger etc.
I was following the instructions from LinageOS 16, got thru unlocking and into fastboot, all going as described until it said sideload the package. When I did this the UI on the phone said the package was for z3c and that my phone was a ".".
Part of the linageos instructions were to wipe parts of memory and cache, which I think is why when I reboot the phone now, it just sticks on the logo, I cannot get back to the fastboot UI either.
Using the flashtool on my PC I can still connect and load the stock fw but it makes no difference.
I did backup a couple of sections, with TWRP, I thought to the sdcard, before I started, but I cannot see them on the card now, could they be hidden?
Or have I done the impossible and really bricked a z3c?
Chris

[Help] Xperia sp stuck in repairing logo

Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
TMates said:
Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
Click to expand...
Click to collapse
Try to charge the phone for few hours and then flash stock rom via flashtool.
Rupant said:
Try to charge the phone for few hours and then flash stock rom via flashtool.
Click to expand...
Click to collapse
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
TMates said:
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
Click to expand...
Click to collapse
1. Download "C5303_12.1.A.1.207_AU.ftf" (Stock firmware) from here
2. Take of your back cover.
3. Open Flashtool (I expect you to have the Xperia SP drivers installed).
4. Turn off your phone by taking a pen and pressing the "off" hole and wait until it has vibrated 3x.
5. Press volume up (to get into flash mode) and connect your USB cable to the computer and wait until you get a green light.
6. Click on the flash icon in Flashtool and select flash mode. Now select the folder "Downloads" and select the "C5303_12.1.A.1.207_AU.ftf" file you have downloaded and wait 5-10 minutes.
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
TMates said:
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
Click to expand...
Click to collapse
Please click on "thanks" and what error do you get? Please tell us more.
CubeDev said:
Please click on "thanks" and what error do you get? Please tell us more.
Click to expand...
Click to collapse
still the same error stuck in repairing logo and when flashing always stuck in here my log :
23/005/2015 06:05:20 - INFO - <- This level is successfully initialized
23/005/2015 06:05:20 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/005/2015 06:05:25 - INFO - Device disconnected
23/005/2015 06:05:31 - INFO - Selected null
23/005/2015 06:05:31 - INFO - Flash canceled
23/006/2015 06:06:17 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/006/2015 06:06:17 - INFO - Preparing files for flashing
23/006/2015 06:06:31 - INFO - Please connect your device into flashmode.
23/006/2015 06:06:49 - INFO - Device connected in flash mode
23/006/2015 06:06:50 - INFO - Opening device for R/W
23/006/2015 06:06:50 - INFO - Reading device information
23/038/2015 06:38:43 - INFO - Unable to read from phone after having opened it.
23/038/2015 06:38:43 - INFO - trying to continue anyway
23/038/2015 06:38:43 - INFO - Start Flashing
23/038/2015 06:38:43 - INFO - Processing loader
23/038/2015 06:38:43 - INFO - Checking header
23/038/2015 06:38:43 - INFO - Ending flash session
23/038/2015 06:38:43 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
23/038/2015 06:38:43 - ERROR - Error flashing. Aborted
23/038/2015 06:38:49 - INFO - Device disconnected
23/052/2015 06:52:09 - INFO - Device connected with USB debugging off
23/052/2015 06:52:09 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/052/2015 06:52:14 - INFO - Device disconnected
23/004/2015 07:04:34 - INFO - Device connected with USB debugging off
23/004/2015 07:04:34 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/004/2015 07:04:39 - INFO - Device disconnected
23/050/2015 12:50:40 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/050/2015 12:50:40 - INFO - Preparing files for flashing
23/050/2015 12:50:58 - INFO - Please connect your device into flashmode.
23/051/2015 12:51:11 - INFO - Device connected in flash mode
23/051/2015 12:51:12 - INFO - Opening device for R/W
23/051/2015 12:51:12 - INFO - Reading device information
Click to expand...
Click to collapse
just stuck in there status and has several times i try results remain the same.
I've been looking at some of the threads with the same log problem remains unsuccessful.
sorry i use google translate and still bad.
Help
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
You need to install drivers again. They seem to be broken. Are you using Windows 8.1??
If yes, then disable driver signature verification and then install the drivers again.
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Kaneki Kun said:
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Click to expand...
Click to collapse
Debugging mode is only for a phone in turned on state.
When you flash the device you do it in Flashmode which has nothing to do with debugging mode on or off.
Just press the "Flash" button.
Select firmware from list.
Press OK, and go into Flashmode.
CubeDev said:
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Click to expand...
Click to collapse
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
thank you very much.
TMates said:
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
Click to expand...
Click to collapse
Please do not skip any step.
Hello? Could you report?
CubeDev said:
Hello? Could you report?
Click to expand...
Click to collapse
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
TMates said:
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
Click to expand...
Click to collapse
Hi, did you solve the problem. Because I have exactly the same problem with you.

Categories

Resources