[Q] Stock recovery issue - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hello, guys! One friend of mine have a problem with this phone. He want's to install Root+CWM on stock JB 4.1.2 but recovery isn't working, the phone just boot as usual. Download mode is still works. Any suggestions about restoring Recovery? Android was upgraded from GB to JB via OTA

DumF0rGaming said:
Hello, guys! One friend of mine have a problem with this phone. He want's to install Root+CWM on stock JB 4.1.2 but recovery isn't working, the phone just boot as usual. Download mode is still works. Any suggestions about restoring Recovery? Android was upgraded from GB to JB via OTA
Click to expand...
Click to collapse
Root.zip can be flashed in stock recovery. If you want permanent cwm,you must flash CocoreE kernel with Universal Kernel Flasher.
-Download CoCore E kernel and extract 'kernel.bin.md5'
-Flash it with using UKF
Sent from my GT-I9070 using xda premium

phyowaiummg said:
Root.zip can be flashed in stock recovery
Click to expand...
Click to collapse
The problem is stock recovery isn't working, we CAN'T use root.zip. The phone just boot as usual

Flash again with Odin stock Jelly Bean and see if work to go in recovery.
Powered by CM10.1

DumF0rGaming said:
The problem is stock recovery isn't working, we CAN'T use root.zip. The phone just boot as usual
Click to expand...
Click to collapse
Use temporary recovery and flash root.zip with this
Inviato dal mio GT-I9070 con Tapatalk 2

Yep if you can't enter recovery, flash the firmware back using ODIN as you can still go into download mode. Steps are here.

DumF0rGaming said:
The problem is stock recovery isn't working, we CAN'T use root.zip. The phone just boot as usual
Click to expand...
Click to collapse
Ofcourse it boot normaly after rooting. What you expect to be after root? It just gives you root permissions. Nothing is changed in visual.
To get CWM use CoCore, UNZIP IT and transfer KERNEL.BIN.MD5 to phone, install Universal kernel flash and some explorer with root permissions like ES FILE EXPLORER. Open Universal kernel flasher, and open kernel with it and install it. Both things you have in Play store. Before doing this you need to root it.
P.S. To enter recovery turn off phone, and power on by holding Volume Up + Home (hardvare key below screen) and Power at the same time untill phone vibrate.
Послато са GT-I9070 користећи Тапаталк 4

shut_down said:
Ofcourse it boot normaly after rooting
Click to expand...
Click to collapse
We don't install root yet, we need stock recovery for that. Thanks everyone

Apparently his stock recovery isn't working so he can't flash anything
Yeah, try to download a firmware from sammobile(ublph) (lqg) and flash via odin, since your downloading mode still works

DumF0rGaming said:
We don't install root yet, we need stock recovery for that. Thanks everyone
Click to expand...
Click to collapse
I am sure that you two was not using right combination of buttons, or you did it wrong. Do like I wrote. VolUp+Home+Power, untill it vibrate.
He need external SD card, in stock recovery you can't install anything from internal memory.
Послато са GT-I9070 користећи Тапаталк 4

DumF0rGaming said:
We don't install root yet, we need stock recovery for that. Thanks everyone
Click to expand...
Click to collapse
And you can flash that root.zip for our JB on any recovery.

Related

Remove CWM

hi
i will remove cwm from my handy.... i will make it original, how can i make it ?
sorry for my bad english
Download the cwm flashable file from here and flash it in cwm.You will have your original recovery back.
Download the stock recovery from HERE and flash it with CWM and you will have original stock recovery.
perfekt
Can I do this proccess with a Sony Xperia??
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
Can I do this proccess with a Sony Xperia??
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
Not with the files posted here.
Hi! I flashed I8190_stock-recovery-flashable.zip, but Rom Manager still write:
Recovery Setup
Current Recovery: ClockworkMod 6.0.2.7
Whats wrong?
somin.n said:
Hi! I flashed I8190_stock-recovery-flashable.zip, but Rom Manager still write:
Recovery Setup
Current Recovery: ClockworkMod 6.0.2.7
Whats wrong?
Click to expand...
Click to collapse
I don't know about rom manager as I don't really use it. Probably because it was the last known recovery..
Reboot to recovery and have a look..
tys0n said:
I don't know about rom manager as I don't really use it. Probably because it was the last known recovery..
Reboot to recovery and have a look..
Click to expand...
Click to collapse
Thanks for quick reply. It looks that it is there (in fact, I never seen stock recovery before, but now it looks different like cwm), but I can access it only via RomManger... Is there other way how to boot in stock recovery? I can boot in download mode (menu + volume down + power), but in this mode i can't do anything ... :/
edit:
I found [GUIDE] How to reboot in recovery, so maybe it is not only my problem
somin.n said:
Thanks for quick reply. It looks that it is there (in fact, I never seen stock recovery before, but now it looks different like cwm), but I can access it only via RomManger... Is there other way how to boot in stock recovery? I can boot in download mode (menu + volume down + power), but in this mode i can't do anything ... :/
edit:
I found [GUIDE] How to reboot in recovery, so maybe it is not only my problem
Click to expand...
Click to collapse
Good. Yeah, its different, and rommanager isn't compatible with stock recovery. You won't be able to flash anything but samsung-signed updates.
Not able to boot to recovery is well known. Good you found out. Have a look here..http://forum.xda-developers.com/showthread.php?t=2157105 for an easy way to enable three button combination :good:
tys0n said:
Good. Yeah, its different, and rommanager isn't compatible with stock recovery. You won't be able to flash anything but samsung-signed updates.
Not able to boot to recovery is well known. Good you found out. Have a look here..http://forum.xda-developers.com/showthread.php?t=2157105 for an easy way to enable three button combination :good:
Click to expand...
Click to collapse
Hehe, if I set reboot to recovery in RomManger after updating from cwm back to stock recovery, it reboot me in to Stock recovery
Btw, will flashing that 2MB file from "[HOW-TO] Enable Three Button Combo [RECOVERY]" increase binary counter? I know about TriangleAway, but for sure...
And one more question please. My story...
- I flashed pre-rooted 4.1.1 fw via odin
- than i installed RomManger and via it I install CWM
- than become 4.1.2 fw so I flashed this pre-rooted fw via odin - everything was good, phones restart after flash but boot in CWM??? Everything works good, but I was thinking, that with new fw the CWM will gone?!?
Trying to understand how android works (this is my first android phone, before that i had only symbian devices), i read many topic about s iii mini and it looks, that this phone in "unusual" android phone
somin.n said:
Hehe, if I set reboot to recovery in RomManger after updating from cwm back to stock recovery, it reboot me in to Stock recovery
Btw, will flashing that 2MB file from "[HOW-TO] Enable Three Button Combo [RECOVERY]" increase binary counter? I know about TriangleAway, but for sure...
And one more question please. My story...
- I flashed pre-rooted 4.1.1 fw via odin
- than i installed RomManger and via it I install CWM
- than become 4.1.2 fw so I flashed this pre-rooted fw via odin - everything was good, phones restart after flash but boot in CWM??? Everything works good, but I was thinking, that with new fw the CWM will gone?!?
Trying to understand how android works (this is my first android phone, before that i had only symbian devices), i read many topic about s iii mini and it looks, that this phone in "unusual" android phone
Click to expand...
Click to collapse
Yeah, it will let you reboot to recovery but that's all. No flashing, no backups or anything. Kinda sad to install an app just to reboot :silly:
You probably have to use triangle away after that file even though the files are taken out of service-firmware, but it only takes a minute.
These firmwares doesn't normally include recovery..don't know why. Thats what I'm used to from other models, but not for this one.

[Q] Backup option not showing in recovery mode (2.3.6 Gingerbread)

Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
skatlyup said:
Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
Click to expand...
Click to collapse
1. You instaled Jelly Bean ROM on Gingerbread. If you want it you need to flash JB with Odin, you have guide here - search for it.
2. We only can use custom recovery that is instaled with kernel, because those two share same partition. So no other way to install it, like on some other phones.
3. You probably got bootloop after installing JellyMOD on GB, so I suggest you to flash GB again. Or JB if you want it.
4. After geting back to GB, you can go get that recovery back and restore your prevoius ROM.
shut_down said:
1. You instaled Jelly Bean ROM on Gingerbread. If you want it you need to flash JB with Odin, you have guide here - search for it.
2. We only can use custom recovery that is instaled with kernel, because those two share same partition. So no other way to install it, like on some other phones.
3. You probably got bootloop after installing JellyMOD on GB, so I suggest you to flash GB again. Or JB if you want it.
4. After geting back to GB, you can go get that recovery back and restore your prevoius ROM.
Click to expand...
Click to collapse
Thanks for the reply but I think you may have misunderstood.
I haven't installed JB YET, so I am STILL on Gingerbread.
Any options I have?
skatlyup said:
Thanks for the reply but I think you may have misunderstood.
I haven't installed JB YET, so I am STILL on Gingerbread.
Any options I have?
Click to expand...
Click to collapse
I was tired. I read that you instaled JellyMOD. You have stock recovery, it do not have backup. You need to root, and to install kernel with TWRP. Look for it in dev section of our phone. If you want Jelly MOD you need to flash JB with Odin.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
I was tired. I read that you instaled JellyMOD. You have stock recovery, it do not have backup. You need to root, and to install kernel with TWRP. Look for it in dev section of our phone. If you want Jelly MOD you need to flash JB with Odin.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Since my phone is already rooted is it ok just to install the kernel?
After a search I found this [GT-I9070][Kernel][GINGERBREAD] Stock Kernel + TWRP Recovery for Galaxy S Advance (http://forum.xda-developers.com/showthread.php?t=1873119&highlight=kernel+gingerbread).
Would it be ok to just install this via Odin?
Not with odin but yes, that is what you need. Get universal kernel flasher and use that tool to flash kernels. Odin way will increase binary counter.
Sent from my GT-I9070 using xda app-developers app
Thanks for your replies.
I managed to install the kernel now and backup my phone.
skatlyup said:
Hi,
I am currently on rooted 2.3.6 Gingerbread (I9070) and will upgrade to the JellyMOD (http://forum.xda-developers.com/showthread.php?t=2170925).
I've been advised to do a Nandroid Backup of my system via the recovery menu (Volume up+Home+Power button) before I upgrade.
I did this but the option for Backup doesn't appear.
After a quick research I installed Rom Manager via google play. Tried to install ClockworkMod Recovery via Rom Manager but it says my I9070 is not supported.
I'm a noob here and hope someone can help in getting the Backup section to show up in recovery mode.
Thanks.
Note: In about phone it shows:
Baseband version: I9070XXLD1
Kernel version: 2.6.35.7-I9070XXLD1-CL1067329 [email protected] #2
Build number: GINGERBREAD.XXLD1
Click to expand...
Click to collapse
JellyMod is base on JellyBean offical rom so it can't install from Gingerbread you have to update to jellybean with Kies or flash it with odin. Then get to recovery mode flash CWM and do what you want like root or flash kernel or Jellymid
Sirry for my english

[Q] How do I install clockwork mod?

I downloaded and installed 4.1.2. I want to put an CWM and then root files, but I am getting stuck on the CWM install.
Apparently there are 2 files: CWM.zip and UPDATE.zip. The process, as I understand it, is to boot into stock recovery mode,
install CWM.zip from the external SD card (I don't see an option in recovery for installing from the internal SD card. Then during the install press the home key and the screen simultaneously and the phone supposedly goes into CWM, from which you can install UPDATEzip.
So, I booted into stock recovery mode. I installed CWM.zip and pressed home and the screen. Nothing happens.
After that, I thought maybe the ROM Manager would do it. But after downloading that from the app store, it turns out there isn't a version for the 9070, just the 9000. It offered a choice of manual, older CWMs, but they wouldn't install either. Then ROM Manager told me I needed to root first. OK, so I rooted. But how do I get a current CWM?
P.S. I read the Complete Guide to CWM that is on XDA. Very informative except it left out how to install it
Thanks
corvus.corax said:
I downloaded and installed 4.1.2. I want to put an CWM and then root files, but I am getting stuck on the CWM install.
Apparently there are 2 files: CWM.zip and UPDATE.zip. The process, as I understand it, is to boot into stock recovery mode,
install CWM.zip from the external SD card (I don't see an option in recovery for installing from the internal SD card. Then during the install press the home key and the screen simultaneously and the phone supposedly goes into CWM, from which you can install UPDATEzip.
So, I booted into stock recovery mode. I installed CWM.zip and pressed home and the screen. Nothing happens.
After that, I thought maybe the ROM Manager would do it. But after downloading that from the app store, it turns out there isn't a version for the 9070, just the 9000. It offered a choice of manual, older CWMs, but they wouldn't install either. Then ROM Manager told me I needed to root first. OK, so I rooted. But how do I get a current CWM?
P.S. I read the Complete Guide to CWM that is on XDA. Very informative except it left out how to install it
Thanks
Click to expand...
Click to collapse
By installing kernel with CWM embended. CoCore is our only kernel with support now.
Root phone.
Install CoCore-E, Harsh build. (Unzip it, use kernel.bin.md5 with Universal Kernel flasher, and you will need some root explorer like ES file explorer to use file with Universal kernel flasher.
Thanks for the advice. I am rooted. I have ES File Explorer. I am concerned that the Harsh build (via the link you put there) is a test build. Can I trust it to be stable or is there an earlier, tried and true build? I was thinking of using 7.0 CWM Touch that is listed in post #4 on the cocore thread.
corvus.corax said:
Thanks for the advice. I am rooted. I have ES File Explorer. I am concerned that the Harsh build (via the link you put there) is a test build. Can I trust it to be stable or is there an earlier, tried and true build? I was thinking of using 7.0 CWM Touch that is listed in post #4 on the cocore thread.
Click to expand...
Click to collapse
7 has some freez problem, I use that Harsh version, and I did not have freez. Install it, and wait for CoCore 7.xx.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
7 has some freez problem, I use that Harsh version, and I did not have freez. Install it, and wait for CoCore 7.xx.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
I installed the Harsh version. There was one little episode with a shaking home screen, which went away after a restart. Everything else seems okay so far.

[Q] Sd card won't mount in recovery

Hey guys i just rooted my friends galaxy using odin , i also installed superuser, downladed rom recovery manager , updated it , downloaded rom and google apps files and then from rom manager rebooted into recovery but sd card is not appearing! I also uninstalled rom manager and entered in recovery using volume up button but the same result, any suggestions?
DrGreem said:
Hey guys i just rooted my friends galaxy using odin , i also installed superuser, downladed rom recovery manager , updated it , downloaded rom and google apps files and then from rom manager rebooted into recovery but sd card is not appearing! I also uninstalled rom manager and entered in recovery using volume up button but the same result, any suggestions?
Click to expand...
Click to collapse
Is your sdcard mounted in the recovery options?
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Is your sdcard mounted in the recovery options?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I don't know, how can i check that?
Go to recovery and see if your card is mounted.
DrGreem said:
Hey guys i just rooted my friends galaxy using odin , i also installed superuser, downladed rom recovery manager , updated it , downloaded rom and google apps files and then from rom manager rebooted into recovery but sd card is not appearing! I also uninstalled rom manager and entered in recovery using volume up button but the same result, any suggestions?
Click to expand...
Click to collapse
Search "repartition SD card" here on xda.
shut_down said:
Search "repartition SD card" here on xda.
Click to expand...
Click to collapse
hey guys when i press home button and volume down button this is the screen whitch appears, but in the recovery i only see phone memory.. ;/
Dafuq?
DrGreem said:
hey guys when i press home button and volume down button this is the screen whitch appears, but in the recovery i only see phone memory.. ;/
Dafuq?
Click to expand...
Click to collapse
1. That is stock recovery.
2. Root your phone, HOW: http://www.youtube.com/watch?v=jij-Bssni1s
3. Install CoCore HOW: Download it from here, unzip it and put kernel.bin.md5 to your phone (remeber where you put it). Use one with CWM, it is most similiar with stock one (that you do not get confused) Then install Universal kernel flash and ES File explorer. In Universal kernel flash thread is explanation how to use it, read it.
4. Reboot to recovery like you did (now it will not be stock one) and than you can install custom rom.
You can't install custom rom from stock recovery, that is why you need to do all this.
Dude the video you sent me has already costum recovery, i dont! And i rooted the phone already using this guide here http://www.androidrooting.com/how-to-root-samsung-galaxy-s-advance-i9070-gingerbread-2-3-6/
Ok i am flashing the kernel but the program crashes after 4 seconds of execution ;/
DrGreem said:
Dude the video you sent me has already costum recovery, i dont! And i rooted the phone already using this guide here http://www.androidrooting.com/how-to-root-samsung-galaxy-s-advance-i9070-gingerbread-2-3-6/
So shall i proceed to step 2 ?
Click to expand...
Click to collapse
Wait, that root method is for Gingerbread? You have GB?
If that is correct than install custom rom for gb only. Your solution is to repartition sd card. That's why you can't see it. I had the same problem, and I am telling you from my expirience. Search xda with "how to repartition sd card". Like I told you on my first post on this thread.
Послато са GT-I9070 користећи Тапаталк 4
shut_down said:
Wait, that root method is for Gingerbread? You have GB?
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
Yes lol
Gingerbread
EDIT:
Finally flashed costum kernel entered in recovery and flashed cyanogen! thanks a lot for help
DrGreem said:
Yes lol
Gingerbread
EDIT:
Finally flashed costum kernel entered in recovery and flashed cyanogen! thanks a lot for help
Click to expand...
Click to collapse
Just to know, now if you want to go back to gb you can't just flash fw from sammobile. You need to use guide for going back to gb.
Послато са GT-I9070 користећи Тапаталк 4
shut_down said:
Just to know, now if you want to go back to gb you can't just flash fw from sammobile. You need to use guide for going back to gb.
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
So everything seemed ok i flashed cyanogen 10.1 but sim card would't work so i flashed jetmod but nothing happens after booting i mean i stucks in the samsung galaxy screen so i tried reflash cyanogen but i get the following error.. Any suggestions??? :S
DrGreem said:
So everything seemed ok i flashed cyanogen 10.1 but sim card would't work so i flashed jetmod but nothing happens after booting i mean i stucks in the samsung galaxy screen so i tried reflash cyanogen but i get the following error.. Any suggestions??? :S
Click to expand...
Click to collapse
Yes. For begining would you read my post that you just quoted. JetMOD is GB ROM. You can't just install GB ROM over CM. You can't even install JB ROM over CM (you need to change kernel first).
For JetMOD downgrade to GB, root and install custom recovery and than JetMOD.
http://forum.xda-developers.com/showthread.php?t=2100642
If you want to be on JB still, then download your firmware from sammobile.com and flash it with Odin. http://forum.xda-developers.com/showthread.php?t=1985398
Do you have I9070P??? If you do do not install non P firmware, you will HARD BRICK PHONE!!! That error 7 was shown because you used wrong version of CM, if you have P than you should download for P.
P.S. Your sim card will work if you do FACTORY RESET. It should be always done on every ROM change.
shut_down said:
Yes. For begining would you read my post that you just quoted. JetMOD is GB ROM. You can't just install GB ROM over CM. You can't even install JB ROM over CM (you need to change kernel first).
For JetMOD downgrade to GB, root and install custom recovery and than JetMOD.
http://forum.xda-developers.com/showthread.php?t=2100642
If you want to be on JB still, then download your firmware from sammobile.com and flash it with Odin. http://forum.xda-developers.com/showthread.php?t=1985398
Do you have I9070P??? If you do do not install non P firmware, you will HARD BRICK PHONE!!! That error 7 was shown because you used wrong version of CM, if you have P than you should download for P.
P.S. Your sim card will work if you do FACTORY RESET. It should be always done on every ROM change.
Click to expand...
Click to collapse
Ok so now im downloading firmware from sammobile, then i just flash it using odin right?
EDIT ok i installed stock firmware and everything is ok, thanks again

Root problem

So I tried to root my Galaxy S Advance using Odin. Everything went well until the reboot part. It's been stuck at the Samsung Galaxy S Advance logo screen for a while. What can I do ?
Thanks !
Flash the firmware again! Upgrade to jelly bean, if on gb, and use shaan's method to root.
szzlgupta said:
Flash the firmware again! Upgrade to jelly bean, if on gb, and use shaan's method to root.
Click to expand...
Click to collapse
I'm sorry! I'm new to these things. Flash the firmware again how ?
LaurMetall said:
I'm sorry! I'm new to these things. Flash the firmware again how ?
Click to expand...
Click to collapse
That root method with Odin is for Android 2.3. You tried it on 4.1.2? If yes, then download your JB firmware again and install it with Odin (like you did with that root). And use this for root: http://forum.xda-developers.com/showthread.php?t=2087424
shut_down said:
That root method with Odin is for Android 2.3. You tried it on 4.1.2? If yes, then download your JB firmware again and install it with Odin (like you did with that root). And use this for root: http://forum.xda-developers.com/showthread.php?t=2087424
Click to expand...
Click to collapse
Yes, I tried it on 4.1.2. I'm downloading the firmware now (it seems I'll have to wait a bit longer), I'll install it and I'll get back to you to tell if it worked. Thank you !
It worked ! Thanks guys ! But I have another question: shut_down the root method you showed me..will it work if my phone has never been rooted?
LaurMetall said:
It worked ! Thanks guys ! But I have another question: shut_down the root method you showed me..will it work if my phone has never been rooted?
Click to expand...
Click to collapse
Yes, it will work. That zip is signed, and it can be installed with stock recovery without root.
LaurMetall said:
It worked ! Thanks guys ! But I have another question: shut_down the root method you showed me..will it work if my phone has never been rooted?
Click to expand...
Click to collapse
Yes, that root method work on all stock Jelly Bean firmware.
Powered by CM10.2
Guys, I've encountered another problem and I thought it wasn't necessary to open another thread. So..I managed to root my phone and I would like to install a custom ROM but I have problems with Clockwork mode. I found a thread about temporary CMW for JB and I tried it but it doesn't seem to work. I installed it but when I want to navigate through it's menus (for example going to the "install zip from sd card" menu) it restarts. Even when I try to reboot my phone ("reboot system now") it doesn't work. CWM just restarts. Any thoughts ?
LaurMetall said:
Guys, I've encountered another problem and I thought it wasn't necessary to open another thread. So..I managed to root my phone and I would like to install a custom ROM but I have problems with Clockwork mode. I found a thread about temporary CMW for JB and I tried it but it doesn't seem to work. I installed it but when I want to navigate through it's menus (for example going to the "install zip from sd card" menu) it restarts. Even when I try to reboot my phone ("reboot system now") it doesn't work. CWM just restarts. Any thoughts ?
Click to expand...
Click to collapse
Install CoCore with Universal kernel flash, and use permanent cwm. You need to unzip it, and use kernel.bin.md5 and you must have some root explorer installed.
Sent from my GT-I9070 using Tapatalk
Is there any way to do this without changing the kernel ? I'm worried about bricking my phone
LaurMetall said:
Is there any way to do this without changing the kernel ? I'm worried about bricking my phone
Click to expand...
Click to collapse
No, you cannot change kernel without rooting your phone.
And rooting has a lot less risk of bricking phone.
//Just Do It.

Categories

Resources