build.prop mistake - Motorola Droid Bionic

Hey all My friend gave me his Droid Bionic running ICS update and he said he was trying to get it to work with att BUT while in the process he tried to put in a different build.prop but he deleted the one out of his system folder. The phone boots on a black screen and will not connect to the pc he said he also tried doing the recovery thing to it,
So. No build.prop
Black screen boot.
And no way to mount.
Any ideas?

midgetgnome said:
Hey all My friend gave me his Droid Bionic running ICS update and he said he was trying to get it to work with att BUT while in the process he tried to put in a different build.prop but he deleted the one out of his system folder. The phone boots on a black screen and will not connect to the pc he said he also tried doing the recovery thing to it,
So. No build.prop
Black screen boot.
And no way to mount.
Any ideas?
Click to expand...
Click to collapse
do you still have the original rom zip?
if have then copy the zip in sd card using another phone or card reader and then do the fresh flash again.
if dont have then re download the zip and do the fresh flash..
hit thanks button if i helped you somehow.
and u need to be more specific on what device you are talking about..
you havent mention the device you are using..

midgetgnome said:
Hey all My friend gave me his Droid Bionic running ICS update and he said he was trying to get it to work with att BUT while in the process he tried to put in a different build.prop but he deleted the one out of his system folder. The phone boots on a black screen and will not connect to the pc he said he also tried doing the recovery thing to it,
So. No build.prop
Black screen boot.
And no way to mount.
Any ideas?
Click to expand...
Click to collapse
If the data on this phone is no longer needed, you could alway flash a stock JB 4.1.2 using RSD.
That'll surely fix all the problem except data loss.

the hellboy said:
do you still have the original rom zip?
if have then copy the zip in sd card using another phone or card reader and then do the fresh flash again.
if dont have then re download the zip and do the fresh flash..
hit thanks button if i helped you somehow.
and u need to be more specific on what device you are talking about..
you havent mention the device you are using..
Click to expand...
Click to collapse
I dont have anything I did download the ICS SBF but RSD wont see the device for some reason. And I did tell you what device I said DROID Bionic in my first post. Any other specifics I cant give because I cant get into my phone to see them.

midgetgnome said:
I dont have anything I did download the ICS SBF but RSD wont see the device for some reason. And I did tell you what device I said DROID Bionic in my first post. Any other specifics I cant give because I cant get into my phone to see them.
Click to expand...
Click to collapse
You didn't state that you did this. So, I'll start with the obvious.
1. Fully charge and then power off the phone.
2. Press & hold the volume + and volume -.
3. Power on the phone.
4. Once the boot menu comes up, use volume - to move to AP Fastboot & select wit volume +.
5. Plug in the phone to your PC and run RSD Lite. Click Config>Flash modes>Fastboot Mode.
6. Flash the phone with ICS or JB.
If you choose BP SBF Flash, on the menu, RSD may not work right. If you try to downgrade it, you can brick it.
Let me know how it goes.

pmrmx774 said:
You didn't state that you did this. So, I'll start with the obvious.
1. Fully charge and then power off the phone.
2. Press & hold the volume + and volume -.
3. Power on the phone.
4. Once the boot menu comes up, use volume - to move to AP Fastboot & select wit volume +.
5. Plug in the phone to your PC and run RSD Lite. Click Config>Flash modes>Fastboot Mode.
6. Flash the phone with ICS or JB.
If you choose BP SBF Flash, on the menu, RSD may not work right. If you try to downgrade it, you can brick it.
Let me know how it goes.
Click to expand...
Click to collapse
I would definitely not recommend flashing JB. Stay with ICS.
Once you go to JB you are locked down with lots of restrictions.
If you stay with ICS you can root easier, and you have more choices of custom roms that you can use.
If you go JB, you can only use JB custom roms.
You can use either safestrap or bootstrap if you stay with ICS. If you do JB, you are stuck with safestrap.
Stay with ICS! If you want JB, only use custom JB roms, don't flash them through RSD.

pmrmx774 said:
You didn't state that you did this. So, I'll start with the obvious.
1. Fully charge and then power off the phone.
2. Press & hold the volume + and volume -.
3. Power on the phone.
4. Once the boot menu comes up, use volume - to move to AP Fastboot & select wit volume +.
5. Plug in the phone to your PC and run RSD Lite. Click Config>Flash modes>Fastboot Mode.
6. Flash the phone with ICS or JB.
If you choose BP SBF Flash, on the menu, RSD may not work right. If you try to downgrade it, you can brick it.
Let me know how it goes.
Click to expand...
Click to collapse
RSDLite does noto see the phone at all. Making it impossible to flash. I have tried 6 different cords including the one that came with the phone. And if you read one of my earlier posts you will see where I said rsd isn't working. I cant seem to figure out how to get it to work either. Ive done the drivers several times along with new cords..

midgetgnome said:
RSDLite does noto see the phone at all. Making it impossible to flash. I have tried 6 different cords including the one that came with the phone. And if you read one of my earlier posts you will see where I said rsd isn't working. I cant seem to figure out how to get it to work either. Ive done the drivers several times along with new cords..
Click to expand...
Click to collapse
Do you see a device in Windows Device Manager? Can you get to the menu I talked about on the phone. RSD won't see the phone if Windows doesn't load the drives correctly. Do you have the Android SDK loaded? That can help w/ manual flashing... and drivers. It's important to get the phone in the AP Fastboot mode to get the proper connectivity.

Related

Droid 3 Stuck at M Logo - Bricked?

Hey guys,
I just recently got a refurb Droid 3 after my old one had the backlight go out, I hand't had a chance to bootstrap it and put ICS on it. But I was able to get it rooted. I restarted my phone today and ever since it has been stuck at the M logo screen and I've tried everything I can find to remedy this.
I updated this morning to the most recent OTA update (5.7.906 I believe) and then rooted it.
To fix the issue I've tried a few different things. I tried Pete's SBF to 5.7.890 but I was getting an error about the cbt.bin file. I found that with the recent changed to 5.7.906 you aren't able to directly flash over it to go back to 5.7.890. I then found another post on here which had a script to go back to 5.7.890 from 5.7.906. I ran that and still had the same result.
Any other ideas or anything that I am missing?
I can get into fastboot, I've been using the scripts with moto-fastboot. Normal boot is just leaving me at the M logo, booting into recovery yields the same result.
Any help would be appreciated since I have no clue what else I can do at this point...
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
I don't have a BT Tools selection. I do have BP Tools though. I selected it and it just sits there on the M logo as well...
I've tried a few of Pete's scripts with no luck so far (worked on the old Droid 3 when I put it back to stock before shipping it back).
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
imperpetual said:
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
Click to expand...
Click to collapse
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Juicy555 said:
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Click to expand...
Click to collapse
It is charged. When it's not charged it gives the "LOW BATTERY" error.
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
ovelayer said:
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
Click to expand...
Click to collapse
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
imperpetual said:
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
Click to expand...
Click to collapse
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
ovelayer said:
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
Click to expand...
Click to collapse
I'm fairly certain that could work, if I could ever get into the Stock recovery....I'm not able to boot into anything. Going to try a few other things, if nothing else works I'll just take it in and see if I can get yet another warranty replacement.
Thanks for the responses, if you have any other ideas just let me know.
I think the main thing that needs to be addressed is that I need to be able to get into recovery and then I will be set to fix it. Right now it just sits at the M logo for Recovery (and any other options from the boot menu).

[Q] Rooted my LG p880, and now it won't start

Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Taynor said:
Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Click to expand...
Click to collapse
Just flash original stock KDZ file with kdz flasher.
If you want to install CM, you do not need a rooted phone, but an unlocked bootloader.
Check the respective threads for details on how to unlock the phone and then flash CM.
Taynor said:
Hi!
I just rooted my brand new LG optimus 4x HD, and when I was going to install cyanogenmod on it, the phone stopped working. I pressed to restart in recovery and installing the rom, but when it was about to restart, it only says something like: unrecoverable boot loader, and something with kernel. I don't know what this means, but I hope there is a way to fix this, because the phone is brand new, and now I can't even start it.
Some suggestions?
Click to expand...
Click to collapse
try flashing the stock rom again
to fix this problem
seems like something went wrong maybe
go in dev section to find how
Soul reaper said:
try flashing the stock rom again
to fix this problem
seems like something went wrong maybe
go in dev section to find how
Click to expand...
Click to collapse
But how am I supposed to do anything when I can't even start my phone? :/
Taynor said:
But how am I supposed to do anything when I can't even start my phone? :/
Click to expand...
Click to collapse
Enter software upgrade mode. Better yet http://forum.xda-developers.com/showthread.php?t=2069723
anGel_pLayer said:
Enter software upgrade mode. Better yet http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
ok, i'll try that in a couple of hours when I get home, Thanks everyone! I'll be back if there is another problem
in the lg pc suite that comes with the phone there is an option in "Device" for "emergency firmware recovery" this should be a relatively easy way to restore your phone if it allows you to do it without booting up otherwise use the method posted earlier. to get into the correct mode on the phone turn phone off, then whilst holding vol- plug in the usb (don't press power button) this should enter software upgrade mode.
after this you will lose root and if you unlocked your bootloader will relock it.
i used this http://forum.xda-developers.com/showthread.php?t=2256392 all in one tool to root and this http://forum.xda-developers.com/showpost.php?p=40918727&postcount=108 to unlock bootloader, you can use the all in one tool (from rooting) to install cwm after you have unlocked bootloader.
I hope this helps
maff90 said:
in the lg pc suite that comes with the phone there is an option in "Device" for "emergency firmware recovery" this should be a relatively easy way to restore your phone if it allows you to do it without booting up otherwise use the method posted earlier. to get into the correct mode on the phone turn phone off, then whilst holding vol- plug in the usb (don't press power button) this should enter software upgrade mode.
after this you will lose root and if you unlocked your bootloader will relock it.
i used this http://forum.xda-developers.com/showthread.php?t=2256392 all in one tool to root and this http://forum.xda-developers.com/showpost.php?p=40918727&postcount=108 to unlock bootloader, you can use the all in one tool (from rooting) to install cwm after you have unlocked bootloader.
I hope this helps
Click to expand...
Click to collapse
I tried to root via the all-in-one toolbox, but I don't get how I am supposed to do... And after trying to do some things and factory resets, I'm unable to start my phone again. This time i'm stuck on bootscreen. And I can't seem to get to the S/W Upgrade screen again, i don't know why...
Is there something i can do with ADB sideload?
Taynor said:
I tried to root via the all-in-one toolbox, but I don't get how I am supposed to do... And after trying to do some things and factory resets, I'm unable to start my phone again. This time i'm stuck on bootscreen. And I can't seem to get to the S/W Upgrade screen again, i don't know why...
Is there something i can do with ADB sideload?
Click to expand...
Click to collapse
Open and reinsert your battery. It may help.
It helped me when couldn't get into s/w upgrade mode after flashing CyanogenMod RC2.
Subhajitdas298 said:
Open and reinsert your battery. It may help.
It helped me when couldn't get into s/w upgrade mode after flashing CyanogenMod RC2.
Click to expand...
Click to collapse
I try to flash to RC2 too... But without success. How do I get into S/W Upgrade mode? nothing works, and holding down volume button doesn't make anything happen :/
Taynor said:
I try to flash to RC2 too... But without success. How do I get into S/W Upgrade mode? nothing works, and holding down volume button doesn't make anything happen :/
Click to expand...
Click to collapse
to get into S/W upgrade mode, remove battery, insert battery, hold the vol-, and plug in a usb attached to a computer (keep holding vol-).
hope this helps. also try a different pc usb port or a different cable (just to eliminate any variables)
maff90 said:
to get into S/W upgrade mode, remove battery, insert battery, hold the vol-, and plug in a usb attached to a computer (keep holding vol-).
hope this helps. also try a different pc usb port or a different cable (just to eliminate any variables)
Click to expand...
Click to collapse
For how long do I need to hold down the volume button?
Taynor said:
For how long do I need to hold down the volume button?
Click to expand...
Click to collapse
it should only be about 15secs before the s/w update mode starts
just to make it clear i made a video http://www.youtube.com/watch?v=F0Vw-ZTr3xY
maff90 said:
it should only be about 15secs before the s/w update mode starts
just to make it clear i made a video http://www.youtube.com/watch?v=F0Vw-ZTr3xY
Click to expand...
Click to collapse
Thank you so much for the video, it worked and now my phone is rooted and alive, now I just have to figure out how to flash a custom rom into it and the CMW recovery...
Good to see you ok. CWM needs unlocked bootloader not just root.
Taynor said:
Thank you so much for the video, it worked and now my phone is rooted and alive, now I just have to figure out how to flash a custom rom into it and the CMW recovery...
Click to expand...
Click to collapse
I don't know why didn't you understand my words but glad that you are running well now. For CWM or a custom rom, you need unlocked the bootloader not root.
I've managed to fix it now, I don't know how, but it worked thanks everyone for the help, running cm10.1 now
Is there anyway i can dowbload lg+ tag and quick memo? It isnt included in the rom :/
No, but I did a factory reset and flashed the rom, and then the stock apps werent included
astr_x said:
If you want to install CM, you do not need a rooted phone, but an unlocked bootloader.
Check the respective threads for details on how to unlock the phone and then flash CM.
Click to expand...
Click to collapse
Hi astr_x,
Do you have any example links for the respective threads you mention? I have tried adb and fastboot. I hold Volume down + plug into my computer and I get the Unrecoverable bootloader error that was mentioned above. In fact, I get this error even when I plug my phone to a normal plug (and not PC). Anyway, I connect my phone to my laptop (I always get the error mentioned) and when I type the relative adb+fastboot command in cmd (after installing all the relative drivers), I get "Error: Unknown device".
Any thoughts?

CM 10.1.3 Accidentally Installed on Stock Help!!!

I forgot to activate rom slot 1 when flashing so it installed on the stock rom, which said if this was done it would not work, and now the phone will power off at the motorola logo. I made a backup with cwm and it is on my computer as a few .md5 and .win files. It also wont let me load safestrap even though i hold down the buttons to go into bootloader. Please help i really need it fixed
Violentbacon said:
I forgot to activate rom slot 1 when flashing so it installed on the stock rom, which said if this was done it would not work, and now the phone will power off at the motorola logo. I made a backup with cwm and it is on my computer as a few .md5 and .win files. It also wont let me load safestrap even though i hold down the buttons to go into bootloader. Please help i really need it fixed
Click to expand...
Click to collapse
Can you get to AP fastboot? If so, you can then use this utility found here. http://forum.xda-developers.com/showthread.php?t=2207384
You would want to do the full wipe install of jelly bean, so option 1. This should make your phone basically factory new, where you'll have to reroot it and redo safestrap/CM.
RoninRyan said:
Can you get to AP fastboot? If so, you can then use this utility found here. http://forum.xda-developers.com/showthread.php?t=2207384
You would want to do the full wipe install of jelly bean, so option 1. This should make your phone basically factory new, where you'll have to reroot it and redo safestrap/CM.
Click to expand...
Click to collapse
I would try that, but when I start AP fastboot, it reads: battery low, cannot program. I have left it plugged in for 24 hours and still the same message. When I select BP tools, the battery icon shows up with a "?" sign in it instead of a charge percentage.
EDIT- It has begun recharging when I chose BP Diag, and I will update when I attempt to run the razr utility
I would like to say the utility worked! I am very happy that it was fixed. Thank you very much!
Violentbacon said:
I would like to say the utility worked! I am very happy that it was fixed. Thank you very much!
Click to expand...
Click to collapse
Glad to hear. Happy rom flashing.

[Q] I need help with the Samsung Galaxy Exhibit t599n

How do you get Odin to recognize your phone. I can't get it to load on odin. Please help.
or is there any way that someone can make a video or something over the whole process of getting back to stock, I'm a little of a noob with odin.
Thanks in advance!:good:
(I'm New at XDA)
TheMenoHD said:
How do you get Odin to recognize your phone. I can't get it to load on odin. Please help.
or is there any way that someone can make a video or something over the whole process of getting back to stock, I'm a little of a noob with odin.
Thanks in advance!:good:
(I'm New at XDA)
Click to expand...
Click to collapse
Power off phone. Hold down: volume down+home button then press the power key until it vibrates then release.
DevilDogg said:
Power off phone. Hold down: volume down+home button then press the power key until it vibrates then release.
Click to expand...
Click to collapse
I know how to do that that's download mode. I installed the correct samsung drivers(using an .exe I found on XDA, I start Odin then put my phone in download mode but it won't recognize my phone on odin.
You know those squares at the top nothing shows up in other words.
Thanks for your reply though.
TheMenoHD said:
I know how to do that that's download mode. I installed the correct samsung drivers(using an .exe I found on XDA, I start Odin then put my phone in download mode but it won't recognize my phone on odin.
You know those squares at the top nothing shows up in other words.
Thanks for your reply though.
Click to expand...
Click to collapse
R u putting the phone in download mode b4 u connect it to the PC? Open Odin> put phone in download mode> plug phone to PC> pretty sure u know the rest from here
Sent from my CM10.1 SGH-T599
I was trying to find the right version of CM. I see u have 10.1. Once I straighten my problem I will try that. So with that, when I try to install any type or mod and flash it into CWM I enter into a flash loop. Does CWM file need to be actually on my phone? I'm wondering if I'm doing something wrong. I used ROM Manager to try and install Cerberus. When I clicked 'flash recovery' it went to recovery screen and installed the app. Then I clicked 'reboot now' and it went back to recovery screen, constantly. So I went back to stock then reflased CWM with Odin and now I'm back to square one. I need to know what I need to do to flash ROMs and avoid this looping.
Sent from my SGH-T599N using xda app-developers app
flip3601 said:
R u putting the phone in download mode b4 u connect it to the PC? Open Odin> put phone in download mode> plug phone to PC> pretty sure u know the rest from here
Sent from my CM10.1 SGH-T599
Click to expand...
Click to collapse
I'm gonna try that, hope it works.:fingers-crossed:
army frasedN
O.K. Is there anybody that has this phone and has the correct drivers installed? Is there any way somebody can give me the drivers they used in order to put their phone back to stock or whatever. I think their is something wrong with the drivers I have installed.
TheMenoHD said:
O.K. Is there anybody that has this phone and has the correct drivers installed? Is there any way somebody can give me the drivers they used in order to put their phone back to stock or whatever. I think their is something wrong with the drivers I have installed.
Click to expand...
Click to collapse
The drivers should have installed automatically, you mentioned that you installed drivers that you found on XDA? Could you point me towards them?
I don't recall needing to install drivers on Windows 8, so try going to device manager, and uninstalling those drivers, and letting windows 8 automatically install them. Go to device manager, plug your phone in, you should see samsung usb drivers or something along those line pop up, right click on it and uninstall the drivers, then restart pc and phone and this time let windows install the drivers. Put your phone on downlad mode (can be done by pressing volume down, home and the power on button simultaneously).
wilbigdaddy2000 said:
I was trying to find the right version of CM. I see u have 10.1. Once I straighten my problem I will try that. So with that, when I try to install any type or mod and flash it into CWM I enter into a flash loop. Does CWM file need to be actually on my phone? I'm wondering if I'm doing something wrong. I used ROM Manager to try and install Cerberus. When I clicked 'flash recovery' it went to recovery screen and installed the app. Then I clicked 'reboot now' and it went back to recovery screen, constantly. So I went back to stock then reflased CWM with Odin and now I'm back to square one. I need to know what I need to do to flash ROMs and avoid this looping.
Sent from my SGH-T599N using xda app-developers app
Click to expand...
Click to collapse
If I recally correctly, ROM Manager is made by CyanogenMod, right? If so, then it's only useful on the phones it's officially supported on, (our phone is not on officially supported, otherwise we would've definitely seen 4.4 ). The looping probably occurs because it's installing some other software that is not supported on our phone, so your best bet would to flash ROMS found in the "T599x General Discussion Thread", a list of working roms are provided there. Remember to install the necessary GAPPS as well.
SGH-T559N
Exothermic said:
The drivers should have installed automatically, you mentioned that you installed drivers that you found on XDA? Could you point me towards them?
I don't recall needing to install drivers on Windows 8, so try going to device manager, and uninstalling those drivers, and letting windows 8 automatically install them. Go to device manager, plug your phone in, you should see samsung usb drivers or something along those line pop up, right click on it and uninstall the drivers, then restart pc and phone and this time let windows install the drivers. Put your phone on downlad mode (can be done by pressing volume down, home and the power on button simultaneously).
If I recally correctly, ROM Manager is made by CyanogenMod, right? If so, then it's only useful on the phones it's officially supported on, (our phone is not on officially supported, otherwise we would've definitely seen 4.4 ). The looping probably occurs because it's installing some other software that is not supported on our phone, so your best bet would to flash ROMS found in the "T599x General Discussion Thread", a list of working roms are provided there. Remember to install the necessary GAPPS as well.
Click to expand...
Click to collapse
Can anyone assist me with a solution to get my SHGH-T599N to power on. It will not turn on and I've tried everything I know; which isn't much, to get it to turn on.
Abu Ameer said:
Can anyone assist me with a solution to get my SHGH-T599N to power on. It will not turn on and I've tried everything I know; which isn't much, to get it to turn on.
Click to expand...
Click to collapse
Try new battery, but it's probably hard-bricked which means it needs to be JTAG'd, which means you have to go to a repair shop.

Pls help deleted official OS

Hi,
could you pleas help me. I was installing, wiping ROMs in safestrap and didnt pay attention and wipe stock ROM all the system everything. I can get to recovery mod but dont know what to do? Is it possilbe just download and install something in recovery?
Thank you
You actually have a couple options, I think.
If you have a physical microsd card and you can put it in your computer, you can put a zip on there and then flash it from safestrap. But that doesn't seem likely...
Thanks to sdshadow I have another idea. Hold both volume buttons when you turn the phone on. Then use you computer (run rsdlite or the Droid 4 utility) to flash an sbf file to your phone. Obviously this requires a data cable between your computer and phone.
I don't remember how it works, but I think you can transfer a zip from your computer to your phone using a data cable without booting an OS (using adb, I think).
Hopefully this helps or someone else can give you clearer instructions. I'll do a little more research if I need to.
theprogramguy said:
You actually have a couple options, I think.
If you have a physical microsd card and you can put it in your computer, you can put a zip on there and then flash it from safestrap. But that doesn't seem likely...
Thanks to sdshadow I have another idea. Hold both volume buttons when you turn the phone on. Then use you computer (run rsdlite or the Droid 4 utility) to flash an sbf file to your phone. Obviously this requires a data cable between your computer and phone.
I don't remember how it works, but I think you can transfer a zip from your computer to your phone using a data cable without booting an OS (using adb, I think).
Hopefully this helps or someone else can give you clearer instructions. I'll do a little more research if I need to.
Click to expand...
Click to collapse
thank you for answer. Trying to fix it fast before batter died. SD card I can use but dont know how to use safestrap because the safestrap doesnt come up. I can only go to recovery or fastboot but the option 2 is problem that RSD doesnt seen my device. its connect but I cant only unzip files in rsd but no flash it :/
I should still have installed CM 10.2 on rom 1 in safestrap but I dont know how to open safestrap. Because I wipe stock rom the stock rom I have still active and reboot device :/
Ah, I got recovery and SafeStrap mixed up. I have reached the end of my small knowledge.
tofmik said:
I should still have installed CM 10.2 on rom 1 in safestrap but I dont know how to open safestrap. Because I wipe stock rom the stock rom I have still active and reboot device :/
Click to expand...
Click to collapse
try Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, may boot directly to SafeStrap.
if that does not work
may need to re-install drivers or at least look in window device manager to see if it is listed correctly
see my drivers errors
if drivers are correct, RSD lite/Droid 4 utility should see Droid 4.
The phone si ok.
Thank you very much for help!

Categories

Resources