[Q] Droid 3 solana CM10.1 "No Service" - Motorola Droid 3

Hi,
I flashed my droid 3 with the current CM10.1 ROM and it's working... Except for the SIM card.
It's plain not recognizing the sim. No calls, no SMS, no data.
I couldn't find anywhere how to fix nor even how to debug it.
I'm pretty new to android flashing but have extensive experience as Linux sysadmin (15+ years), so any hint about how to debug it would be very welcomed.
Any hints?
( Ahh, I'm in Brazil, using GSM)
Thanks in advance,
Leon

Hi,
Try to find the library libmoto_ril.so from the stock rom at /system/lib, and replace it. You should get signal, but until now, I'm not aware of anyone that made 3g work on JB Roms with GSM networks.
Also replace the line:
ro.telephony.default_network=3
On the default build.prop it is 7 (for CDMA).
Hope this helps.
Sent from my XT860 using xda app-developers app

Hey, I am having the same problem on my droid 3 cm 10.1 installation. I live in Australia and my droid 3 is a Verizon one. I did what you said and then it doesnt boot but stays stuck on the loading screen. I even tried Hashcode's GSM patch and still remains stuck. Any Ideas.
Sent from my DROID3 using xda app-developers app

i hope this one help you http://forum.xda-developers.com/showthread.php?t=1989359

CDMA network is not working
Hi guys,
I recently purchased unlocked Motorola Droid 3 Verizon. But on this phone CDMA sim does not work, GSM working correctly. I need solution....

Related

[Q] Cyanogen v.s. AOSP rom? What am i doing wrong??

Hi guys, appreciate the help with this. I have rooted and have tried all sorts of roms on my Milestone
However with Cyanogen cm7 with Gingerbread 2.3 and other variances of the cm7 i cannot get any network coverage or cant connect to my provider. However my phone works perfect with the 2.3 AOSP roms...
Is there something obvious I am doing wrong? Am i missing something when installing cyanogen roms?
Help?
bikinibottom100 said:
Hi guys, appreciate the help with this. I have rooted and have tried all sorts of roms on my Milestone
However with Cyanogen cm7 with Gingerbread 2.3 and other variances of the cm7 i cannot get any network coverage or cant connect to my provider. However my phone works perfect with the 2.3 AOSP roms...
Is there something obvious I am doing wrong? Am i missing something when installing cyanogen roms?
Help?
Click to expand...
Click to collapse
Yes...You probably need to apply the basebands of your region when you install CM roms.
You can do that in Androidiani 3.3 Open Recovery, on the menu "Change baseband"
vladstercr said:
Yes...You probably need to apply the basebands of your region when you install CM roms.
You can do that in Androidiani 3.3 Open Recovery, on the menu "Change baseband"
Click to expand...
Click to collapse
Ahh OK so it has got to do with applying the basebands to my region.
I have seen this option in Open Recovery 3.3 . Is there any specific file I need to download or number I need to know before attempting to change my baseband.?
i live in New Zealand.
thanks.
bikinibottom100 said:
Ahh OK so it has got to do with applying the basebands to my region.
I have seen this option in Open Recovery 3.3 . Is there any specific file I need to download or number I need to know before attempting to change my baseband.?
i live in New Zealand.
thanks.
Click to expand...
Click to collapse
No, you dont need to download additional files. Just go to Androidiani 3.3 and try applying bands until you get coverage. Many of the people apply RTEU and it works. I dont know what is the baseband for your region, but you switch between them and you will find the proper one.
Hope I've been helpful!
vladstercr said:
No, you dont need to download additional files. Just go to Androidiani 3.3 and try applying bands until you get coverage. Many of the people apply RTEU and it works. I dont know what is the baseband for your region, but you switch between them and you will find the proper one.
Hope I've been helpful!
Click to expand...
Click to collapse
Sweeet as..You have been most helpful. Its working perfectly now. thanks
If you're with XT use the Brazil bb.
Sent from my Milestone using XDA Premium App
Where abouts in NZ are you? I'm also a Kiwi (Gisborne) and I have no baseband trouble at all on any of the GB ROM's, or any ROM's for that matter. I've never had to mess with the baseband and I move from ShadowMod to Cyan7 all the time as they release new updates.
What baseband did you use? Im having the same problem and I can't get 3g working for the life of me. I think it's a mixture of apn setting and baseband. Im on 2degrees btw.
I need help with this too. I live in Auckland and use Vodafone NZ. Originally, my milestone came installed with Froyo (v2.2) and it was the Europe version I believe......both 2G and 3G works fine on it, however I have problems with the wifi like many people have.
So then I later flashed to the New Zealand v2.1 SBF, and now wifi works fine but I can't get any connection to Vodafone. The reason is basically because Vodafone doesn't support Milestone, only Telecom XT does. However, if I switch the network from 2G to 3G, then I can connect to Vodafone. I can also connect to 2Degrees, I can see all 3 networks (Telecom, Vodafone, 2Degrees) when I'm on 3G and I get about 3/4 bars constant so it's stable.
But when if I switch to 2G, I get completely no bars and can't detect any networks at all. Not a big deal but I wanna use 2G to save battery. When I was using the Europe SBF (the v2.2 Froyo that came pre-installed with the Milestone), I was able to use 2G no problem.
Anyway, I think a simple baseband change should be fine, but I'm not sure which one I should use that works well with Vodafone NZ.
The baseband has to match your handset's capability. Xt units lack the Vodafone 900 band, they have 850 instead. Both carriers use 2100 in the CBD. Vodafone has also 2g network that has crap coverage. I'm using my xt set with Vodafone, but there's no point changing the bb as xt ms can't do 900 anyway. Basically get ****ty GPRS except right in town. It's only used as car GPS/stereo so no biggy for me.
but mine isn't originally an XT Milestone, I bought it 2nd hand on Trademe and the original owner of the phone got it from somewhere else. It's just that I flashed the New Zealand v2.1 SBF, which just so happens to be for Telecom since there isn't one for Vodafone......
Plus, it was able to work fine on 2G when I was using the Europe v2.2 (Froyo) SBF, so I don't see why a simple baseband change isn't possible?
Check the exact model number, most of the ones floating in nz are telecom models, no matter what the previous owner was using it with. You can change basebands as much as you want, if it doesn't match your hardware it just won't work. I.e. you will not have 3g outside of main centres. Afaik, 2g is the same on all models.
So, install OR, then one of the cyanogen based roms (it has all nz apns). Boot into or, there's a list of basebands - try till you get one that works.
Have you set your APN setting right?
Sent from my Milestone using XDA App
Cyanogen based roms have all the nz apns, otherwise, you have to put the correct one in.

"This SIM Card is from an unknown source."

I updated the ROM to the most recent ICS leak and inserted my SIM card. When in either GSM or Global mode, the phone will respond with "This SIM card is from an unknown source." Is there any way to fix this? I'm on AT&T in the US.
beepboopbeep said:
I updated the ROM to the most recent ICS leak and inserted my SIM card. When in either GSM or Global mode, the phone will respond with "This SIM card is from an unknown source." Is there any way to fix this? I'm on AT&T in the US.
Click to expand...
Click to collapse
This phone will not work on US GSM frequencies, only abroad.
Sent from my DROID4 using Tapatalk 2
I thought it was compatible with US GSM frequencies since its a quad-band radio. This website refers to the Radiocomm hack to use AT&T (see Android Community's article "Motorola Droid 4, Razr, and Bionic modded for AT&T and T-Mobile") and the resource on Droid-Forums implies that the Radiocomm hack isn't even necessary after upgrading to ICS ("Finally! GSM Droid 4 Works!"). Is there something I'm missing?
edit: I can't post links, so woops! You'll have to search for those things instead I guess.
beepboopbeep said:
I thought it was compatible with US GSM frequencies since its a quad-band radio. This website refers to the Radiocomm hack to use AT&T (see Android Community's article "Motorola Droid 4, Razr, and Bionic modded for AT&T and T-Mobile") and the resource on Droid-Forums implies that the Radiocomm hack isn't even necessary after upgrading to ICS ("Finally! GSM Droid 4 Works!"). Is there something I'm missing?
edit: I can't post links, so woops! You'll have to search for those things instead I guess.
Click to expand...
Click to collapse
I know what you talk about.
GSM is unlocked in ICS for abroad GSM carriers, but it's not working for US GSM. For US GSM you still need to go and use radiocomm patch.
olegfusion said:
I know what you talk about.
GSM is unlocked in ICS for abroad GSM carriers, but it's not working for US GSM. For US GSM you still need to go and use radiocomm patch.
Click to expand...
Click to collapse
I used Radiocomm to check my NV value and it matches what the patch would be setting. I'm still not able to use my AT&T SIM. Has anyone encountered this before?
beepboopbeep said:
I used Radiocomm to check my NV value and it matches what the patch would be setting. I'm still not able to use my AT&T SIM. Has anyone encountered this before?
Click to expand...
Click to collapse
Verizon is obviously blocking access to US GSM networks. This has been reported previously on the ICS leaks. You are out of luck for now unless someone figures out how to patch this.
But I got the same message with my australian sim...
I rooted, installed safestrap and then CM9 with the setting "telephony.lteOnCdmaDevice" set to "0" in the build.prop. After that I had much better GSM-reception and the message didn't show up anymore.
In build.prop there is the following string: ro.telephony.gsm-routes-us-smsc. Could that be the limiting factor? Maybe try change to 0?
That only affects sending of SMSs. If you're not in the US, and not using Verizon's SIM, yes you should set it to 0.
Sent from my DROID4 using Tapatalk
I haven't had any luck from modifying the build.prop file. Running logcat -b radio shows me that CDMA stuff is going on when I'm in CDMA mode (whodathunkit) and GSM is happening when I'm in GSM mode. Is there a guide on how to interface with the radio directly (or, well, through linux or adb) so that I can figure out what the radio is picking up? It might not be seeing the AT&T signal at all. If only I could see what AT+COPS=? returns.
Could someone post their build.prop for the latest leak? Mine was accidentally saved while deleting some line. I don't want to reboot the device for fear of some kind of mishap. If you like outside the US and have your GSM edits included, that would be greatly appreciated
highlandsun said:
That only affects sending of SMSs. If you're not in the US, and not using Verizon's SIM, yes you should set it to 0.
Sent from my DROID4 using Tapatalk
Click to expand...
Click to collapse
hi, i'm not understand where i need to set is zero. pls explain. Now i have the problem " Sim card is from unknown source" and mobile network data is not working. my droid is RAZR HD verizon but i using in out of us.
thanks
beepboopbeep said:
I haven't had any luck from modifying the build.prop file. Running logcat -b radio shows me that CDMA stuff is going on when I'm in CDMA mode (whodathunkit) and GSM is happening when I'm in GSM mode. Is there a guide on how to interface with the radio directly (or, well, through linux or adb) so that I can figure out what the radio is picking up? It might not be seeing the AT&T signal at all. If only I could see what AT+COPS=? returns.
Click to expand...
Click to collapse
I keep having this error on most roms I flash
kswynn said:
hi, i'm not understand where i need to set is zero. pls explain. Now i have the problem " Sim card is from unknown source" and mobile network data is not working. my droid is RAZR HD verizon but i using in out of us.
thanks
Click to expand...
Click to collapse
Hi mate. Find"build prop editor" in play store, install and run the app and search for the string you want to change. Rest is easy.
Sent from my XT894 using Tapatalk 2

ME863 radio CM9

So I flashed my ME863 to a brazilian retail XT860 rom in order to install CM9 in safestrap. However I lost my connection, no gsm. I discovered too that when I choose a radio mode in the menus, it auto selects the next one instead of the one I chose (not sure how to explain, maybe a bug?). I tried to flash willis11's old data patch aswell, but then the phone would get stuck at the CM9 bootup screen. Any suggestions?
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
LaZiODROID said:
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
Click to expand...
Click to collapse
Tried it with the 'new' patch too. Same result. Thought the kexec cm9 had gsm umts native support?
Is the new one you tried the one from here http://dl.hash-of-codes.com/ROMs/solana/cm9/ ?
Sent from my DROID BIONIC using Tapatalk 2
linuxgator said:
Is the new one you tried the one from here
Sent from my DROID BIONIC using Tapatalk 2
Click to expand...
Click to collapse
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Steamed_Egg said:
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Click to expand...
Click to collapse
Your ME863, is it from Asia region like Hong Kong or Taiwan??
Is the signal greatly improved after flashing to Brazilian Rom?
I have an ME863 from Hong Kong and signal strength is very disappointing. Afraid to flash it to Brazilian Rom and bricking it.
Hope you can enlight me pls. Thanks
The two bars thing is a bug indeed.

[Q] Got no network connection on samsung t679

Hi all,
I bought my Samsung Exhibit 4G (t679 ) as new, unlocked. It came with ROM UVLG1. After I inserted my local (Russia) SIM - I got 2G (EDGE) only working. So then trying to understand why 3G does not work - I followed suggestions here(http://forum.xda-developers.com/showthread.php?p=22412278) - to change network Band range using Debug mode.
After few unsuccessful attempts to change Band type from CDMA to GSM .. I got No Network connectivity at all.
Note, wifi is still working fine, but No GSM connection.. Tried to reinstall different ROMs (Peach Sunrise, Galaxy Exhibition) at this link http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G but got no success. I did upgrades using CWM.
please suggest something how I can return at least 2G connectivity? Are there any debug method for Network connectivity issues? Gone thru all t679 related topics but did not find anything applicable for my case.
Much appreciate any help on this.
PS. currently installed: build version GINGERBREAD.UVLG3, kernel 2.6.35.7-custom [email protected]#7
Hmm have not had this problem before, you can try the flash to stock option, see if it will connect in that
Sent from my SGH-T679 using xda app-developers app
tazmaniondvl said:
Hmm have not had this problem before, you can try the flash to stock option, see if it will connect in that
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
Just installed stock version UVLG3 (http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G#Flash_Back_to_Stock) but result is the same. I also found if I change settings->Mobile networks->Network mode from default GSM/WCDMA to any other (GSM only for ex) - these changes are not applied - so next time when I open these settings - it again dislpalys GSM\CDMA mode. Is this a bug or 'feature' ?
Does anyone know any network related debug methods?
...

[Q] att htc one using viperone 2.6.0

hello everyone. im using att htc one that is rooted using viperone 2.6.0. the rom is great!!. im using t-mobile us but my problem is that i only get edge data. is it possible to get 4g ?? another stupid question. is it possible to load t-mobile software on it??. i really want to be able to get 4g on my phone. please help guys. i thank you all in advance.
You don't need to run tmo "software" on it. All GSM ones basically can run the same roms/software as far as custom roms go.
Have you checked your apn in settings? My guess is the current T-Mobile lte apn isn't selected or added.
beamed from space.

Categories

Resources