Database Develop

help miui to stock

help miui to stock
Installed miui MGCv3 to try out which I liked very much but no FM radio so I Went back2 fyoro using Ezbase 2 but I get Fail on
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> factoryfs.rfs
Click to expand...
Click to collapse
can get into download mode with 3 button and resistor 301k

Have you tried re-downloading all the EZbase files including the EZodin and EZpit, could be a corrupt file(maybe the pit)

I've not had a problem reverting back to the 2.2.1 EZBase firmware. I did get a lot of errors when trying to install the 2.3.3 version of EZBase though. Just make sure that you use the pit file that is in that thread and you should be good to go.
As far as the radio issue in MIUI goes, there are plenty of 3rd party fm radio apps on the market that you can use to get the radio feature back again.

Re download all the files but still no joy
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PDA-XWJS3.tar.md5 is valid.
<OSM> EZbase-PHONE-XXJVE.tar.md5 is valid.
<OSM> EZbase-CSC-XXJV1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> factoryfs.rfs
Click to expand...
Click to collapse

Ive had this problem. Wipe all data/factory reset from the recovery menu and then download a new firmware from www(.)samfirmware(.)com
Flash one which has 3 files, not the one which gives you one file which you enter into pda cause you cant select repartition

[Q] Odin fail on flashing Galaxy GT-S5570i

Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks

When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe

try different USB ports on your comp (the ones at the back seem to work best), different USB cables, with the battery in and out, with the SD card removed if you have to. It'll work eventually, It just takes a lot of patience.

mostafaz4 said:
Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
Click to expand...
Click to collapse
You can install the driver by switching on your phone and press the button to enable file transfer via USB.This usually triggers the computer to download the SamSung driver.
Sent from GALAXY mini...Please Thank Me when you think I deserve it

Ri3v| said:
You can install the driver by switching on your phone and press the button to enable file transfer via USB.This usually triggers the computer to download the SamSung driver.
Sent from GALAXY mini...Please Thank Me when you think I deserve it
Click to expand...
Click to collapse
Hi!.
I have the same problem.
I can not flash my GT-S5570i, allway boot.img fail, bcmcp.img fail... ... ...
I have installed Kies + Odin 1.84 (GT-S5570i edition)
-------------------------
FIXED:
http://forum.xda-developers.com/showthread.php?t=2484904

you must split it into 3 files. pda, modem and csc. just stick to 1.84. search for samsung usb drivers and unistall that kies then install samsung usb drivers.
---------- Post added at 06:50 PM ---------- Previous post was at 06:45 PM ----------
here's the link for Samsung Usb Drivers
here's is the ODINATRIX for splitting that into 3 files (pda, modem (phone), csc)
if you having problem that you can splitFUS tool. it's like odinatrix too

mostafaz4 said:
Odin failed to flash galaxy mini gt-s5570i giving this error
Odin errors:
Odin3 1.3
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 1.85
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Multi Downloader 4.38 (Couldn't even read the phone could somebody give me working driver??)
ROM used:
GT-S5570i Egypt version < because im egyptian
S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar
Any idea??
Please i have tried many methods to flash it but all in vain :crying::crying:
Thanks
Click to expand...
Click to collapse
hay man what did u do about this issue did find a solution cause i have the same prob now :crying::crying:

the Bootlouder
jamjoom89 said:
hay man what did u do about this issue did find a solution cause i have the same prob now :crying::crying:
Click to expand...
Click to collapse
my friend i dont know if the problem still on with you but the only way to have your phone back to normal is by flashing a new Bootlouder to your phone by odin just find the boot file and use odin to install it and no more fail

yaho..................................................... its work try odin 3.07

ty yes working with odin 3.07
mustapha47 said:
yaho..................................................... its work try odin 3.07
Click to expand...
Click to collapse
:good::good::good: working with odin 3.07 try it

working with odin 3.07 perfectly

[Q] stuck on Odin

HI, i m update my N7000 to 4.1.2 , when i was use Odin it stuck on status below
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> boot.bin
<ID:0/016> NAND Write Start!!
and also can turn to recovery mode.
ps help

Try to flash a rom zip file from recovery.

nokiamodeln91 said:
Try to flash a rom zip file from recovery.
Click to expand...
Click to collapse
Can not turn in recovery mode

First post you wrote you CAN. Anyways how did you reach this situation?

nokiamodeln91 said:
First post you wrote you CAN. Anyways how did you reach this situation?
Click to expand...
Click to collapse
Sorry , can not turn to recovery mode, just can turn to download mode ( Odin can ) , but when update to ( N7000DXLSE_N7000OLBLSE_N7000DXLS8 ) it stuck at below
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXLSE_N7000OLBLSE_N7000DXLS8_HOME.TAR.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> zImage
<ID:0/016> NAND Write Start!!
Ps help what can i do next

Start by telling us what did you do to reach that situation.

GT-I9305 Bootloop? Odin Fail, wanting data back...

Hi all,
Samsung Galaxy S3 - GT-I9305. After the OS patch was getting a few issues like system randomly resting, security block popups on some apps when there never was before. One night however woke up and the phone was powered down. Now only powers up only into Samsung Logo bootloop. Cant enter recovery mode, just goes into the loop. I've got 2 ROMs from SAM mobile for my carrier, one older and one recent, as i'm unsure what my ROM is and cant check it now. Both however fail with Odin. Log listing below.
Have tried different ports, using original cable. Ideally would like to get my data back as pictures and contacts were not backed up.... Please help! Pretty desperate and haven't really found anything in forums for this situation.
Odin logs;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

TWRP
Hello and thank you for using Q/A,
can you please try flashing TWRP via AP:
twrp-2.8.7.0-i9305.img.tar
And then please try to boot into TWRP using the known combination. Tell me, if your I9305 is booting into TWRP then.
Regards
Trafalgar Square

Thanks for reply. I tried on Odin3 1.87 and 3.10.7 both fail; log
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Option selected auto reboot via AP.
:crying:
Any other suggestions?

The thread is dead, but in case anyone is coming across the same sort of problem.. i bit the bullet and took it to a service tech. They couldn't fix it and had to replace the motherboard. So unfortunately that was the solution for me anyway. :crying:

TWRP wipe and deleted /system haven't been able to get past system.img in odin HELPP

I have a sprint galaxy note 5. I accidently formatted in twrp. Since then its' stuck here ( NOTE: I WAS ON 5.1.1 AND I'M TRYING TO FLASH 6.0.1 I HAVE THE 6.0 TWRP THAT IS REQUIRED)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
Click to expand...
Click to collapse
Anyone have any ideas at all? I have no way to get a replacement until next week so I'm gonna do what I can to get this working. Any additional info can be provided
what I've tried:
different ROM ( could be using the wrong one)
N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5
N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5
ALL_SPT_N920PVPU2BPC3_N920PSPT2BPC3_CL7231607_QB8832851_REV00_user_low_ship.tar.md5
all of these have the same problem. I am starting with a clean phone pretty much. system 0 bytes data 0 bytes
I have noticed that /system won't mount in TWRP when trying to repair the directory possibly this has something to do with it
Any advice at all is welcome. I have no clue where to go from here
EDIT: Just tried a new usb port and it worked after 7 hours of trying over and over

I would try to get my hands on an updated stock rom bundled with boot image and kernel and try that with odin. Also be sure you are using the right Odin.