[Q] Update after Flash Ultimate N7000 XXLT4 JellyBean 4.1.2 v6? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi,
I've just updated to Ultimate N7000 XXLT4 JellyBean 4.1.2 v6 (many thanks to joosh3 again, the videos are so clear about the update, and the ROM seems to be nice even though I haven't tested it for a long time yet).
Yet, I have a question: right after the flash, I had a Samsung's notification about a firmware update (ntg to do with OTA UltimateN7000 update). Am I supposed to do this one? Or should I just ignore it?
Thanks in advance for your answer!

Please provide a screenshot, if possible.. cause I guess this seems a lot unclear

Related

[Q] Root galaxy s I9000

Hey
Need to root my galaxy s but dont know how!
I was trying to download superoneclick but everytime i download it the download never finishes or is corrupt
Model Number:GT-I9000
Firmware Version:2.1-update1
Baseband Version:I9000XXJM1
Kernel Version:[email protected] #2
Build Number:ECLAIR.I9000XXJM1
Is there any tutorial out there for rooting the galaxy s?
Cheers
Hey,
Rooting can seem like a hard thing, and don't worry, the first time I had trouble as well :L
Have you tried z4root? Its a neat little apk that supposedly roots any phone on 2.1. Thing is though I don't know whether it works for XXJM1 or not.
Alternatively what you can do is upgrade to Gingerbread and root. And I think that'd be the best thing to do.
1.) Upgrade to XXJW4 (2.3.6) by means of Odin. If you don't know what I mean, feel free to ask.
2.) Search around these forums for a thread about CF-Root. Read Chainfire's instructions carefully and select the right file- if you don't know which one I'll find it for you. The file should have JW4 in it though, so that hopefully is easy enough to find...
3.) Unzip the file. In it you'll find a .tar file. Using Odin again flash this .tar file in. Again, if you need help, feel free to ask
And there you go! Rooted, on 2.3.6.
I'm not quite sure how to root the I9000 on Eclair, so that's the only advice I can give....
Hope I helped though
Sent from my GT-I9000
I want to root my samsung I900 but what is the best choice, there are so many versions
The only thing i know for sure that it has to be 4.1 or higher
GT-I900
2.3.6
baseband versie: I9000XXJW4
Build nr. GINGERBREAD.XWJW5
the power said:
I want to root my samsung I900 but what is the best choice, there are so many versions
The only thing i know for sure that it has to be 4.1 or higher
GT-I900
2.3.6
baseband versie: I9000XXJW4
Build nr. GINGERBREAD.XWJW5
Click to expand...
Click to collapse
Hey,
Are you talking about which 4.1+ rom you should use?
Quite obviously there's CM10 and CM10.1. Take your pick of 4.1.2 vs. 4.2.1.
Well many people recommend Slim Bean http://forum.xda-developers.com/showthread.php?t=1780071 because its very small (only 60MB or something like that), very fast and stable.
Apparently Mackay Rom is really good as well.
If you want the feel of Touchwiz and the SIII, C-Rom Bean and C-Rom Bean Mix are available in 4.1.2 and 4.2.1 for each. Again, your pick. A lot of people report this to be very stable as well.
There's tons more roms for the lovely I9000 so you'll have to do some searching around for one that you'll like. But those seem to be the top Jelly Bean roms around...
Sent from my GT-I9000
Ok, many thanx for the info
Going to do the C-RoM Mix 4.2.1 v2.zip 186808KB that came out today
Found the installation guide on androidauthority.com, guess that guide will be here on this forum somewhere but i just googled and came out there
How long does it takes for flashing is ready, used C-RoM Mix 4.2.1 V2, screen is showing for 20 minutes logo "Semaphore" , is that normal ...
edit: my pc reconizes the phone as Android ....
edit 2: did flash c-rom mix again and BINGO, works
got no imei anymore, messed around with different ways to get it back, it's all gone, no back up nothing, just a working phone but cant call
what to do ....
:victory: :laugh: yessss, rooted back to 2.3.6 and its all working again -> thanks for [HowTo] Officiele XWJW5 (2.3.6) via Odin (NL/BE) from GirlKillu from androidworld
now I wil flash it to latest slim bean version, this time I will make it 100% sure to back up efs folder
How To Root Galaxy S
Jammie25 said:
Hey
Need to root my galaxy s but dont know how!
I was trying to download superoneclick but everytime i download it the download never finishes or is corrupt
Model Number:GT-I9000
Firmware Version:2.1-update1
Baseband Version:I9000XXJM1
Kernel Version:[email protected] #2
Build Number:ECLAIR.I9000XXJM1
Is there any tutorial out there for rooting the galaxy s?
Cheers
Click to expand...
Click to collapse
Hey so in order to root your phone you will need to things Odin and CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip. .. follow the steps at this site
links are below

Idea Sketch

Guys,
Anybody knows which Jelly Bean Leak or Custom Jelly Bean supports "Idea Sketch" option.
Sorry if this ask earlier. Thing is i could not find any where.. Currently i'm running Ultimate v5.1 XXLSC.
Thanks Guys.
check in this.. not sure if it works
http://forum.xda-developers.com/showthread.php?t=2093629

[Q] JB TW Apps from XXLSZ for ICS TW XXLRT

Hello dear xdacom.
I want to ask, if it is possible to port the all stock-apps (settings,camera, new notificationbar and statusbar (systemui?)) from the new XXLSZ to XXLRT (ICS generally)? Because i find XXLSZ very unstable, and it is freezing all the time for me, but XXLRT isnt, and i like the new theme very much.
Best regards
No
with correct flashing procedure official JB is stable. even leak JB was very stable.
so the problem is not JB.
search and learn.
good luck
Sent from my GT-N7000 using xda app-developers app

[Q] Samsung GT N 7000 - XXLSZ issue

Hi All,
I need a help, i had install Ultimate JB XXLSZ version and it worked well. Post the XXLT update system started restarting automatically at any point of time, especially while answering calls. So i switched back to XXLSZ which was working then without any issues. Now after installing XXLSZ (after clean wipe, etc. etc as in the forum) it works but still restarts during answering calls. Can anyone help me on what needs to be done ? Last time when i installed i had installed Phliz kernel post ROM installation, but this time i have not done it. Need your suggestions if this is the issue if so link for downloading the same.
Thanks for your help.
satven21 said:
Hi All,
I need a help, i had install Ultimate JB XXLSZ version and it worked well. Post the XXLT update system started restarting automatically at any point of time, especially while answering calls. So i switched back to XXLSZ which was working then without any issues. Now after installing XXLSZ (after clean wipe, etc. etc as in the forum) it works but still restarts during answering calls. Can anyone help me on what needs to be done ? Last time when i installed i had installed Phliz kernel post ROM installation, but this time i have not done it. Need your suggestions if this is the issue if so link for downloading the same.
Thanks for your help.
Click to expand...
Click to collapse
download stock rom from sammobile.com and reflash with full wipe and stay on stock kernel..
samsung galaxy note gt n7000
Mayank Chandwani said:
download stock rom from sammobile.com and reflash with full wipe and stay on stock kernel..
Click to expand...
Click to collapse
Thanks....actually i went for paranoid rom....works fine so no hardware issue. But i am missing the features of Ultimate Jelly bean over stock.....

[Q] Rooting and CWM my 2nd n7000

Hi guys
I recently brought a 2nd hand n7000
This rom is totally stock, to be precise, it is a Hong Kong version 4.0.4
Since I want to improve the battery life and have a more defined rom.
I would like to root and install CWM.
Up to now, I understand that there's the infamous brick kernels out there. And I probably need to stay away from ICS.
But because of my n7000 is 2nd hand, i don't know much history about it.
i can not know for sure, that this n7000 is shipped with GB or ICS at the first place?
Or the last guy actually upgrade it from a GB.
My research in this forum tells me it's always better to start with the JB aka 4.1.2 stock.
My question is can i simply flash a HK 4.1.2 as a base without doing all sort of EMMC checking?
Then, flash kernel comes with root & CWM? And finally my rom of choice?
I would like someone could guide me and show me the SAFE way,
Thx in advance!!
Ya.. You can upgrade to JB.. Use of Odin or Kies. Then use Philz kernel to root and get cwm. Now you may proceed with custom roms.
Thx for answering.
I have successfully upgraded my n7000 to JB
it's ZSLR1 (Hong Kong latest stock JB)
Just one more question about rooting.
Can you help me check if this is the correct kernel?
philz_touch_6.19.3-n7000.zip
from http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000
I am planning to use the stock recovery method.
I am too afraid to brick this n7000 with "wrong" kernel
THX
j4371 said:
Thx for answering.
I have successfully upgraded my n7000 to JB
it's ZSLR1 (Hong Kong latest stock JB)
Just one more question about rooting.
Can you help me check if this is the correct kernel?
philz_touch_6.19.3-n7000.zip
from http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000
I am planning to use the stock recovery method.
I am too afraid to brick this n7000 with "wrong" kernel
THX
Click to expand...
Click to collapse
That kernel is fine if you plan to flash another 4.1.2 or touchwiz based ROM. If you plan on upgrading to kit kat or 4.3jb custom ROMs, you will need raw kernel instead.
Sent from my GT-N7000 using xda app-developers app

Categories

Resources