This tutorial is for flashing RHOD400 & RHOD500 CDMA+GSM Global phones.
In this tutorial some good ROM links are given also.
Thanks to xda members OliNex, mskip, cajunflavoredbob, HTC0017, wizardknight, arrrghhh
To install / flash new ROMs in your device you have to follow 2 major steps
1. Flashing HardSPL
2. Flashing the ROM
Now, I strongly suggest all of you to kindly download the proper STOCK ROM for your device because if anything goes wrong, you can switched to your main shipped ROM.
Check if your device is GSM or CDMA(GSM+CDMA), read this Post
GSM Stock ROMs here
CDMA Stock ROMs here
These are the steps to be followed.
1. Flashing HardSPL
NOTE: If you already installed HardSPL in your RHOD400, RHOD500 device, you will not need this update.
: it's like with previous Hard-SPL unlockers - every user gets one free use of the Hard-SPL, further use is subject to paying 3GBP per each device. However, if you are a private user, you can have other uses free on request if needed, such as using it on a replacement device.
the license is valid forever and all this works as transparently as possible, so for normal users nothing is noticable.
Preparations:
0) this package is for Rhodium CDMA-GSM worldphone version only (CDMA Touch Pro 2, not the original Touch Pro) devices. only RHOD400, RHOD500 modelids are accepted. this Hard-SPL supports WM6.5.
1) if you have Vista / Windows 7, WMDC update to 6.1 (or whatever is latest) is recommended.
Steps:
1) download newest RhodiumW Hard-SPL package and extract this to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!! the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license.
4) run Rhodium-HardSPL.exe on your PC, make sure it's launched from a local drive (not through network drive, etc.). running it on XP requires Admin logon, and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, so allow it please.
important: if you get an antivirus warning, please ignore it, it contains no harmful code (just used a packer to compress it). if you encounter DEP errors, then add it to the exception list in DEP settings.
5) follow steps as prompted in the Hard-SPL program. if this is the first run of Hard-SPL on a device after hard reset, you must select Automatic flash mode (the first button in Welcome screen).
notes: you should usually go for Automatic flash mode; the Manual flash option is only to be used as noted below - any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
6) it will ask you to wait while it prepares for the flashing, press OK.
7) now it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the forums, but this should not ever occur (as this means a really fatal error occurred).
at this point the device did hopefully went to a black screen. this is the SSPL version, which is temporary. then RUU (Rom Update Utility) will instantly launch.
9) some notes: when RUU says it will perform a hard reset and cause data loss, do not worry, it is not going to do this. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
10) SPL flashes, device automatically reboots, job done.
11) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.00.OliNex, which is the current Hard-SPL version.
More Notes:
NOTE 1: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, you need the following key combination: Power Button + Volume Down + Reset Button. means, do a soft reset while holding the "volume down" key and power key on the side of the device. hold these keys until you see a special tricolour screen which is the bootloader mode.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs (except of course some Radio roms). also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted on our site. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 3: anyone having USB problems with the device after it already entered SSPL mode, please copy SSPL-Manual-Rhodium.exe from SSPL-Manual-RhodiumW.zip (available on our site), copy it to the device and run it. then once the screen has gone black, run the Hard-SPL package on the PC and you must select Manual flash option. *important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual method.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or a customRUU if you need to flash cooked ROMs.
NOTE 5: supported OS versions: both 32-bit and 64-bit XP, Vista, Windows 7RC and later. Windows 2000 was untested, and pre-RC win7 (lower than build 7100) is explicitly not supported. also, the program may be unstable or not work on Virtual systems, so it's recommended to try outside Virtual OS software.
Credits:
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> concept of EXE program that runs on the PC, Hard-SPL concept, server-side license code and maintaining the licenses.
cmonex -> HSPL package on PC, SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code),
2. Flashing the ROM
Download Your preferred ROM
Mighty ROMS
Energy ROMS
More Links
http://www.4shared.com/archive/I5UoXF8V/EnergyRHODCDMA29022Sense25Jul0.htm
http://www.4shared.com/archive/3r2Av95q/EnergyRHODCDMA21905Sense25GTXT.htm
I personally prefer Energy ROMS. I have faced a few issues with the mighty ROM.
Flashing Via ActiveSync
1. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!!
3. Turn phone back on and wait until it syncs with your PC
4. Run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Turn phone back on and set up as required
OR
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
JOB DONE. Well Done YOU DID IT!!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
I Do Not Accept Donations.
Sharing is Caring.
Related
After hours !!! trying almost every advice I don`t know what to do ! I would for the help !
hardspl process
I did everything what is written here and it still doesn`t work:
step by step:
- this is ONLY for warranty reasons. i.e. the device needs repair and you have to send it to htc to get it serviced. if you plan to restore hardspl then don't even bother flashing this stock package, unless you are some kind of hacker/dev
- IMPORTANT: be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
- now the steps
1. download the stock spl package from this post.
2. download X1_HardSPL_v1 too, from this post.
3. run the hardspl package, but do not press Next button i.e do not go ahead with flash yet.
4. at this point, take the extracted stock SPL, a RUU_Signed.NBH file, and overwrite the other RUU_Signed.NBH in hardspl package.
Yes it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
"Hard-SPL flashes, device automatically reboots, job done"
THIS never happened but it seems that I do have the hardspl done !
BUT - the next problem when I run the RUU process I get always the error message "update error 262" which is a coomunication error.
Is there hope for me ?
What exactly are you trying to do?
and please stop posting the same thing over again, people will answer you when they get a chance!
If you are trying to get to Hardspl then why are you trying to flash back to the stock spl??
Follow the proper instructions..
http://forum.xda-developers.com/showthread.php?t=431218
From the start of the post to the 3rd lot of stars ****
If you are trying to return to stockspl having already flashed Hardspl then you wont be able to flash any more roms except the stock one.
OK !
My steps:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en done
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder. done
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment). only X1 done
3) you must Have Phone Synced with PC in Windows Mobile! done
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh) done
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar. done
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!). done !!!
7) Hard-SPL flashes, device automatically reboots, job done. THIS doesn`t happen !
****
then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
****
Have you tried this?
fards said:
****
then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
****
This next step is not possible because X1 and PC are never connected !
Click to expand...
Click to collapse
At the moment I`m working with the sd way but getting the answer "no image file"
the coloured display is saying
Kovs110
SPL-0.72....
microp1...
microp2....
I am about to swap to a new ROM on my HTC touch HD and since i am a noob i have some questions here.
1 Is it easier to use a pc with XP than with windows 7?
2 To find out what spl version you have you have to put your phone in bootloader mode, is that correct?
3 If i use a pc with windows 7 when flashing i have read that you have to install new drivers to your HTC SYNC, is that correct and where can i find those drivers?
4 HSPL vs USPL what is the most noob friendly one?
Thank you for reading this and i would be very glad if i can get some help.
Forca
Forcavitale said:
I am about to swap to a new ROM on my HTC touch HD and since i am a noob i have some questions here.
1 Is it easier to use a pc with XP than with windows 7?
2 To find out what spl version you have you have to put your phone in bootloader mode, is that correct?
3 If i use a pc with windows 7 when flashing i have read that you have to install new drivers to your HTC SYNC, is that correct and where can i find those drivers?
4 HSPL vs USPL what is the most noob friendly one?
Thank you for reading this and i would be very glad if i can get some help.
Forca
Click to expand...
Click to collapse
1. Yes
2. Yes
3. Yes
4. For the Noob it is better the USPL..
ROM update process explained in detail here:
http://forum.xda-developers.com/showthread.php?t=505377
Changing the HTC Syn driver on Vista / 7:
http://forum.xda-developers.com/showthread.php?t=524619
Download Drivers.zip
Follow screenshots
I RECOMEND FLASHING VIA SD CARD its more safe and easy
tsalta said:
I RECOMEND FLASHING VIA SD CARD its more safe and easy
Click to expand...
Click to collapse
Is there any thread out there that you know where i could read about flashing via the SD card
Forcavitale said:
Is there any thread out there that you know where i could read about flashing via the SD card
Click to expand...
Click to collapse
Not much use having a whole thread on it.. Its idiot proof
USPL has its own thread, so does hSPL so look at them (stickied)
-download rom
-run RUU
-press next once
-in the folder of the RUU youl see RUU_Signed.nbh
-Rename the nbh file BLACIMG.nbh
-copy to sd card..
-keep hold of down volume button and pres power simultaniously
-And there you go
loading... Checking...
-Press power button and wait
Soft reset
Flashing by sd card goes like this
Format the SDcard to FAT32, rename the RUU_signed.nbh to Blacimg.nbh
1. Copy BLACIMG.NBH into the root dir of your Storage Card.
2. Be sure to have at least 30% of charge.
3. Turn off your device . Fully power the device off by long press of power key.
4. Go to bootloader mode. Push and hold Vol Down + press Power button.
5. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
6. The whole procedure will take about 3 minutes. After you finish and see the relative message, hard reset your device, you are ready.
Dark Ninja said:
Not much use having a whole thread on it.. Its idiot proof
USPL has its own thread, so does hSPL so look at them (stickied)
-download rom
-run RUU
-press next once
-in the folder of the RUU youl see RUU_Signed.nbh
-Rename the nbh file BLACIMG.nbh
-copy to sd card..
-keep hold of down volume button and pres power simultaniously
-And there you go
loading... Checking...
-Press power button and wait
Soft reset
Click to expand...
Click to collapse
So downloading the ROM, i have been looking at duttys, so i will download that.That sounds like the easy part
Next step, run RUU, im a noob i dont know what run RUU means but the way you descripe it, it sounds like a program am i right?
I suppose when i know what that means the next steps will explain themselfes
Copy to SD card, should i use an empty card or will the one in the phone do?
And by soft reset i suppose you mean pressing the button on the back on the phone or am i wrong there.
After this i done i am ready to install the custom rom?
Cheers and thank you for your help
Forca.
PS. I actually managed to jailbreak my iphone, it was piece of cake compared to what this seems to be DS
Sadly it isn't quite that simple
HSPL allows you to flash roms from SDCard. Read the HSPL thread (linked to above) for information on installing HSPL to your phone; this will allow you to install custom roms from 1.56 onwards (anything from the last 12 months really). It won't work using SDCard method without updating HSPL as the stock Blackstone uses 1.19 SPL.
When you download a rom it should come in a zip file containing ruu_signed.nbh and customruu.exe. Using USPL method you need updated drivers for Win 7 (as described above), plug your phone in in activesync mode and run the customruu.exe and follow the instructions. USPL updates your SPL from 1.19 to 1.56 to allow for flashing while your phone is plugged in (tethered flashing). HSPL updates the SPL permanently (unless you downgrade it again), allowing for untethered flashing.
Using HSPL/SDCard method you rename the ruu_signed.nbh from the rom zip file to blacimg.nbh and copy it to your SDCard. Then start your phone in bootloader (hold vol down and power on) and follow the instructions. At the end pull out the battery and put it back in to restart your phone.
This guide here: http://forum.xda-developers.com/showthread.php?t=505377 stickied in the rom forum will hold your hand through the process all the way. Use it and you have no excuse to not flash a shiny new rom in the next 20 mins. Preferably 1 of my roms
millski said:
Sadly it isn't quite that simple
HSPL allows you to flash roms from SDCard. Read the HSPL thread (linked to above) for information on installing HSPL to your phone; this will allow you to install custom roms from 1.56 onwards (anything from the last 12 months really). It won't work using SDCard method without updating HSPL as the stock Blackstone uses 1.19 SPL.
When you download a rom it should come in a zip file containing ruu_signed.nbh and customruu.exe. Using USPL method you need updated drivers for Win 7 (as described above), plug your phone in in activesync mode and run the customruu.exe and follow the instructions. USPL updates your SPL from 1.19 to 1.56 to allow for flashing while your phone is plugged in (tethered flashing). HSPL updates the SPL permanently (unless you downgrade it again), allowing for untethered flashing.
Using HSPL/SDCard method you rename the ruu_signed.nbh from the rom zip file to blacimg.nbh and copy it to your SDCard. Then start your phone in bootloader (hold vol down and power on) and follow the instructions. At the end pull out the battery and put it back in to restart your phone.
This guide here: http://forum.xda-developers.com/showthread.php?t=505377 stickied in the rom forum will hold your hand through the process all the way. Use it and you have no excuse to not flash a shiny new rom in the next 20 mins. Preferably 1 of my roms
Click to expand...
Click to collapse
So if i get it right you recommend installing HSPL? The ROM i want to install is thisuttys HD WM6.5 Leo R7 WWE
Based Rom 1.59 ( CE OS Build 5.2.23016.5.3.0 ) will that work then or is it another version i want?
Thank you for answering
Forca
Thank you for helping
Forca
Forcavitale said:
So if i get it right you recommend installing HSPL? The ROM i want to install is thisuttys HD WM6.5 Leo R7 WWE
Based Rom 1.59 ( CE OS Build 5.2.23016.5.3.0 ) will that work then or is it another version i want?
Thank you for answering
Forca
Thank you for helping
Forca
Click to expand...
Click to collapse
Up to you really. I prefer HSPL myself, but only because I can't be bothered to plug my phone in all the time.
Use the dummy guide by Digital Outcast!
It gives a step by step guide to flashing, including updating the drivers in Vista/Win7.
I use USPL myself, because it will reset your SPL at the end of each flash session, so if you ever need to flash back to stock (for warranty purposes) you'll have no problem returning to the standard SPL.
However HSPL is reversable aswell (though you need to do this manually).
dont forget that hspl voids youre warranty if you send it in with hspl on it
so if you go the hspl way dont forget to put back on original spl
Suppose i will use my pc with XP on when i do it since i read that you dont have to update htc sync drivers.
Thank you all for the help
Hi,
I have to reflash my HTC to put the warranty back because I have to send it to HTC
I´m trying to follow:
ow to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the Relocker attachment, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). the included one is the 0.79.0000 stock SPL. you also have the option for 0.84.0000 and 0.87.0000, see the attachments.
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.79.0000 (or 0.84.0000 or 0.87.0000), not 0.85.OliNex.
But when I click in the relocker.exe there is no extraction of file and the computer isn´t doing nothing. I copy the RUU_Signed.NBH to the memory card and power down and start with vol down + power and appears like its trying to load the file but nothing (its just a second)
Any ideas? Someone could help me?
Thank you for your support
JL
jordi.lopez said:
Hi,
I have to reflash my HTC to put the warranty back because I have to send it to HTC
I´m trying to follow:
ow to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the Relocker attachment, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). the included one is the 0.79.0000 stock SPL. you also have the option for 0.84.0000 and 0.87.0000, see the attachments.
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.79.0000 (or 0.84.0000 or 0.87.0000), not 0.85.OliNex.
But when I click in the relocker.exe there is no extraction of file and the computer isn´t doing nothing. I copy the RUU_Signed.NBH to the memory card and power down and start with vol down + power and appears like its trying to load the file but nothing (its just a second)
Any ideas? Someone could help me?
Thank you for your support
JL
Click to expand...
Click to collapse
1.What Kind Of HTC Phone Do You Have?
2.What OS Are You Running On Your Computer?
I Need To Know This Info In Order To Further Help You
I have Windows 7 (32bits). I tried with another Windows 7 (64bits) and the same
The device is a HTC Touch Pro2 Sim Free
Thank you
This should really be in the HardSPL thread. But if your PC isn't extracting anything from the zip file, then it's probably your anti-virus software blocking it (try turning it off).
I don´t have antivirus hahahahah
NO worries, i´ll try tomorrow from a Windows XP in my job ;-0
try what steviewevie said in the above post & also with windows 7 you have to right click on the relocker.exe & run as administrator or it won't work
here try this relocker.exe to see if it works for you Relocker.exe
Dear Honorable Seniors, I am so obsessed to get some troubles with my htc (Touch Diamond 2).
I want to get rid off from my ROM that is already available on it (I dont how to find it is official or cooked and which is that version or name). I try to download many cooked ROMs to flash but tried two:
1-energy
2-mozart
but everytime flashing process stopped at 0% percent and after 6-7mint it display a window for recovery. I do restart my system and got the prior windows version, no flashing at all.
I thought there may be Hard-SPL issue (although I dont know what is it). I download its compatible version and try to flash Hard-SPL it also stuck at 0% and not moving upwards.
Help will be appreciated in their respect.
Sorry if my english not comprehendable I am not english speaking person.
regards,
Muqaddas Shahzad
[email protected]
+923222000048
1. Install HSPL. Follow instructions in the thread.
2. Install custom ROM.
You cannot install a ROM until you have installed HSPL first.
I think Muqaddas has already tried HSPL as he described in the post, but the progress stuck @ 0%.
Muqaddas, may be you can try below:
- Disable antivirus software, temporarily, on your PC
- Do HSPL (1.83 and update to 2.51)
- Use Advance ROM Update Utility to do a Task 29.
- Upgrade to latest Radio ROM, if not latest.
- Flash the ROM you wanted.
Hope this will help you .
Thanks.
dear prabhat thank to reply me dear:
1-during Hard spl I found my version is already about 2.16.415.3 and the version I got from Hard-spl link (your given) is showing 1.83.OliNex, yet I tried with this but again stuck at 0% (error code---262)......Can yoy please tell me how Can I check That my cell is already did hard-spl on it-----and how to know it is CID-Unlocked...............
2-by using Advance ROM Update utility, it also not being flashed and giving the same error 0% (code-262)
may this because of my PC operating system which is Windows 7?
but I have flashed HTC Touch Diamond in the same system.....
please help me, my already OS disturbing me alot.
i-windows (send-don't error)
muqaddas_dunyatv said:
please help me, my already OS disturbing me alot.
i-windows (send-don't error)
Click to expand...
Click to collapse
WIN7 could be your issue, it is best to use XP. Also it is important to install the enablenewrapi.cab
You can check your SPL level by entering bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a suffix.
How to flash?
RUU.exe method;
1. Download enablenewrapi.cab, copy to your device with ActiveSync (WMDC) and execute the cab.
2. Download Topaz_CustomRUU_v1.1.zip and both the 1.83 and 2.51 HSPL files.
3. Place the CustomRUU.exe and the RUU_Signed.nbh file from the 1.83 version into the same folder on your PC.
4. With your device sync'd, run the CustomRUU.exe and follow the prompts on your PC.
5. If successful, the progress bar will go to 100% and you can enter bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a sufffix.
If so, you've successfully flashed HSPL.
Repeat steps 3-5 for 2.51
If unsuccessful....
SD Card Method;
1. Rename the RUU_Signed.nbh to TOPAIMG.nbh and place on the root of your FAT32 formatted SD card.
2. Enter bootloader mode and it should initiate the flash. You may get an error of "No Image Found" or you get progress bar stuck at 0%. This would be a failed flash, just soft reset and you'll be back to stock.
If still unsuccessful....
Try the HardSPL_V5_00R5_183HSPL.zip
my respectable serniors please help me out, I tried to change the PC which has Windows XP, and followed all the procedures you all honored but still stock on 0%.....
dear I try to flash PHOTON ROM through storage card by renaming it and placing it into the root of SD card but not being flashed................
please help
HI Muqaddas,
The issue seems to be somewhere in HSPL and the device is not ready for any custom ROM yet. I dont think PC OS has anything to do here unless the "Antivirus S/W is disabled".
Once you device is CID unlocked you should able to install any ROM .
But as you are telling you can see "1.83.OliNex" in the Bootloader... so Can you try to update that to 2.51 and see if that work?
Also try searching the "error code---262" in the HSPL thread, whihc may give you some idea...
EDIT:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
As you said you can see the OliNex in bootloader your device is CID unlocked.
Can you try below and see if that work:
1) Upgrade your HSPL to 2.51.
2) Start Windows Mobile Device Center
3) Start your device in TriColor boot loader mode.
3) Connect you USB to PC and and make sure your device bootloader white screen say "USB"
4) Now start flashing from PC using RUU.
See if this work else try "SD Card Method" suggested by Bruce.
Hope this will help...
Thanks.
On Ur phone go to Settings-> Connections -> USB to PC & "uncheck" the option Enable faster data synchronization & then try ...worked for me
I am sorry to be desperate but after following all the precedures suggested in this place I am not successful...
I was hopefull that I might flash my TOPAZ after getting 512mb card and after many struggles I arranged it for flashing .....
but after bootloader it stuched at
loading.....
please help if someone can
Try restoring your bootloader to the stock, flash a Windows stock ROM, then come back with HSPL and custom ROM.
Hey, May be you can go to service center near to you and ask them to install new ROM so that they will install new ROM and may be try to unlock the phone if it is with them...
Once they install new ROM then I think you can continue HSPL here and have fun .
Thanks.
Dear Hamsn, Where I can get Windows stock ROM, Please any link or description......
You can get that from HTC website of your region.
Goto: http://www.htc.com/uk/selectcountry.aspx
Select your country -> Click Support -> Select your device and download the latest ROM update.
Of you can grab from here: http://shipped-roms.com/index.php?category=windows mobile&model=Topaz
(File: RUU_Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe)
Just sync your device in PC and run the above file and all should get updated .
Cheers!!!
Hello everyone.
I recently became the owner of XPERIA X1i and now I am interested in the following:
1-How do I change the ROM, as is now in Italy to switch to English language.
2-What ROM to download and from where.
3-What other programs are required to change the ROM
I read the forum but we do not succeed to find his way around changing ROM
The data from the phone from bootloader screen
kovs110
SPL-0.78.0000
MicroP1-787
MicroP2-707
Please ask for help because I do not know a word of Italian
Something else I am from Serbia
Hello,
at first you have to unlock your phone with hardspl:
http://forum.xda-developers.com/showthread.php?t=431218
Instructions to flash Hard-SPL:
it's recommended you run the basic package, and don't flash the other attachment (MFG SPL - it is only for hackers).
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
7) Hard-SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.72.OliNex (or 0.52.OliNex MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned OFF, press and hold the volume down button along with the power button, then release the power button, and finally release volume down button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically(your device doesn't go to tricolour screen), please copy Xperia-SSPL-Manual.exe from the Xperia-SSPL-Manual.zip attachment to the device and run it. then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
NOTE 3: this is unsigned Hard-SPL. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here - scroll down!
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
now you can flash all modified roms.
i recommend you to flash roms with the "Micro SD Method".
look at: http://forum.xda-developers.com/showthread.php?t=445662
these are some good roms:
826x Series: http://forum.xda-developers.com/showthread.php?t=734175
Dynamics 2.1: http://forum.xda-developers.com/showthread.php?t=951694