Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now
lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.
eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!
use the update service
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!
how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel
Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.
X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D
Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum
I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA
eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped
Please my xperia z is bricked and i havnt used for over a week now,
i installed pc companion on my pc, it detected an update for my phone, i accepted the update, my phone powered down to install the update, and it got stuck there, refused coming back on, i have tried contacting sony customer service, they gave me some procedures which i have followed to the letter, i have used the pc companion to repair but it tells me there is no update for my phone or sometimes it would tell me update engine could not update your device (error 100), i have also tried using flashtool as well and it gave error, my phone is down and if i power it on it tells me update failed, make sure the phone is connected to a computer and try again,
i have tried all the repair/update procedures known to me several times, disabled my antivirus and firewall, attached is an error i got while using the flashtool...
the phone was rooted with a locked bootloader...
any solution would be highly appreciated..
Don't Upset........!!
Change your PC USB port..!! (im using 2.0 port)
then Cleen
C:\Flashtool\firmwares
folder
IT work's for me..!!
:good::good::good:
Been trying to load the latest update after uninstalling king root too.
the phone reboots then begins the update it cuts out, boots into android again then displays a message that the update failed.
I tried searching for a answer here and on google but so far i have had no luck.
:edit
Tried using pc companion too.
No luck.
Did you find bad rice in root partition?
OmegaRED^ said:
Been trying to load the latest update after uninstalling king root too.
the phone reboots then begins the update it cuts out, boots into android again then displays a message that the update failed.
I tried searching for a answer here and on google but so far i have had no luck.
:edit
Tried using pc companion too.
No luck.
Click to expand...
Click to collapse
Seems you didn't unroot correctly. If pc companion doesn't help then try androxydes flash tool and flash a ftf. That should work.
Good luck.
Just as the title said I tried to flash stock firmware to my xperia tx but it stuck at checking header. I guess my phone was soft bricked while I tried to install a custom rom. I failed to install it but then when I reboot it, my phone couldn't boot to the recovery. Now when I try to turn it on it'll just show the sony logo and then it goes blank.
Then I tried flashtool i've already downloaded the firmware and driver. But everytime I tried to flash it, it stuck at checking header. At first I tried to wait for it because I don't know how long it takes (newbie here). But i've waited for an hour and still nothing happened... please someone help me
clavian123 said:
just show the sony logo and then it goes blank.
Click to expand...
Click to collapse
Bootloop. Sony logo for 30 sec and restart ?
clavian123 said:
But everytime I tried to flash it, it stuck at checking header.
Click to expand...
Click to collapse
You need a clean installing Windows without antiviruses & Sony PC Companion.
Backup currently system with Acronis, MAcrium or another.
Rollback system(if W10) or install again.
Install Sony PC Companion and going to recovery phone. At last stage connect phone with flashmode.
Waiting for installing SEMC Driver to your system.
If bootloader is unlocked, Sony PC Companion showing an error.
Exit Sony PC Companion in tray.
Downloading FlashTool, blocking bootloader and install original firmware.
WArning: dont install any antiviruses software.
REcover your PC system from backup/