Database Develop

Need urgent help..

Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks

happy20b said:
Dear All,
Need urgent help..
I have my brothers Samsung captivate from AT&T .. which was unlocked...
I Rooted it, Installed clockworldmode recovery, and installed ICS image..
Everything went smooth but In ICS i was not able to use mobile network.. So decided to restore the backup which i had taken before flashing ICS.. But whiling restoring from recovery it failed... And i was able to go to only Download mode after that...
But then i decided to flash stock image using ODIN which was also failed and after that i am not able to enter download mode...
When i connect cable, Phone and PC icon comes with exclamation..
Thanks
Click to expand...
Click to collapse
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.

prbassplayer said:
Use the PC!Phone screen as Download mode. If ODIN detects it your good to go.
Click to expand...
Click to collapse
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks

happy20b said:
I have Odin3-v1.85
It ids getting detected at COM13
Ticked PDA and chose file I927UCKI3_STOCK_ROOTED.tar
when i start it gets stuck at SetupConnection
<ID:0/013> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
Thanks
Click to expand...
Click to collapse
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.

prbassplayer said:
Make sure the connection is good. Make sure, if on desktop, you use a rear usb port. Last, this is something I do not sure if it helps or not, run Odin as Admin.
Click to expand...
Click to collapse
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

happy20b said:
I always use backside USB port .. But now i connected to different port at backside.. And ran as adminstrator and this time the log was different.. I got FAIL message in red also
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> factoryfs.img
<ID:0/014> NAND Write Start!!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2

prbassplayer said:
Use another package. Its been a while since I used other Odin files (except few stock ones I have). I can say 1 click KH4 no bl works flawlessly (yes old but its my oh snap 1click)
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the reply.. But i am not aware of 1 click Kh4 no bl method.. even googling din help me.. Could u please point me to the link?
Thanks..

File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2

Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium

4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
OMG how I miss that....

prbassplayer said:
File is in a sticky thread in development section. It has a big list of stock firmware.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I was able to unbrick the cell using onc click unbrick method.. Now i can go to download mode by pressing volume up + down and connecting microusb cable..
If i Boot normally then it will show AT&T screen and will get stuck over ther
If i try to boot to recovery ( I had flashed clockworkmod recovery) then It will display AT&Screen for few seconds and goes off and again comes and goes of.. and this continues...
I am not able to use odin to download any image.. I dont know how to proceed now..
Is it possible to flash clockwordmod recovery from download mode ?
Thanks

Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium

4-2ndtwin said:
Since u can get into dowload mode, u have gotta use an Odin or Heimdall Stock One Click or use other Stock Firmware through the regular Odin or Heimdall to get u back.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...

happy20b said:
I have already tried with Odin and Odin one click method..
I have already mentioned the error in ma previous post... And with Odin one click nothing is happening..
I have put one downloading mode and opened "Odin one click" exe file, one window comes with two buttons start and clear..and empty button n boxes
When you press start , it prints all thread completed in a second and nothing happens..
Gona try with Heimdall stock method now...
Click to expand...
Click to collapse
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2

4-2ndtwin said:
Hey OP,
The Captivate is the i897...
NOT the i927 !!
U were tryin to flash the wrong firmware, according to what u posted above.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
prbassplayer said:
OMG how I miss that....
Click to expand...
Click to collapse
prbassplayer said:
What is your device? Captivate or captivate glide?
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks

happy20b said:
Ohh my god.. How could i miss that too.. Sowie.. I missd out ur post...
I have SGH-I897 oops... I have to find proper file now.. Thank you guys.. will let you know with after downloading and trying I87 image...
Edit:
But i had also tried with I897UCJF6-final-OCD-REV0.exe (odin one click) file and nothing happens with that to,,,
Thanks
Click to expand...
Click to collapse
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2

prbassplayer said:
Avoid flashing firmware with bootloaders
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download

happy20b said:
http://forum.xda-developers.com/showthread.php?t=1300843
Could you please let me know which one to download(safe for my device) from above link ? I would like to flash Gingerbread...
After downloading i have to run Odin and check PDA box and browse file which i have to download from above link and click start .. isnt it ?
Thanks a lot.. My net is not giving speed.. Will take more time to download
Click to expand...
Click to collapse
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2

prbassplayer said:
I would recommend the kk4 without boot loaders in post #3
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...

happy20b said:
Hi, sorry for the late reply.. I was able to recover my device using
[AT&T][UCKB2]Heimdall One-Click -Total Stock
Now I am running stock Froyo .. So should i still install without bootloader Gingerbread KK4 image ???
Coz i guess right now i am having Froyo boot-loader if i am not wrong...
And second question.. right now in Froyo there is no option to install unknown sources.. That option is not there in application settings menu...
Click to expand...
Click to collapse
You probably just flashed froyo boots, so the GB ones would be necessary for GB.
And yes, stock froyo doesn't allow unknown sources.
Swyped from my ICS Samsung Captivate

rooting s6500 100% working

WARNING: FLASH AT YOUR OWN RISK.THIS METHOD VOIDS WARRANTY!​
1st method
this is a boot.img modified by cdesai and FULL CREDIT goes to him!
if you want to thank someone,its him!i just share his work
to flash :
1 plug in a fully charged s6500D in download mode
2 start up odin
3 rename the cdboot.img to boot.img
4 put the boot.img in a full rom and flash it
link to boot.img
give your feedback here plz
2nd method!noob friendly
full credit goes to mb-14
if you want to thank someone,its him!i just share his work moddified for us
tested by me and works FULLY
recovery is s7500 but who cares??
so...
first download files from here
cwm recovery
doomlord's kit
boot phone in download mode by pressing vol down+home key+power button
open odin3 1.85
click the PDA button on the midle right and then select clockworkmod-5.0.2.8.tar.md5 that you downloaded
click start.
w8 for it to say pass with green background
now the phone will boot normally
shut it down again and press vol up+down+home+power to go to recovery
it will show gt-s7500 but it doesnt matter!
Now close Odin
when it gives you a menu go to your pc to the rootme.zip that you downloaded
extract everything in desktop
run the runme.bat (my first time failed so repeat)
w8 for it to finish
press the home button (it should be on the first choise of the menu "reboot system" )
you are done!
ENJOY ROOTED S6500 AND s6500D
3rd method-similar to 2nd by bahek332 ,not tested by me
1. open folder "odin", attach phone to pc, enable usb debugging, make screen timeot 10 minutes(that's just to prevent screen switching off, when you run exploit), go to bootloader(volume down+home+power on), turn off all antiviruses! click PDA, select root.tar, click START.
2. phone reboots with firmware from another phone, open "DooMLoRD_v4_ROOT_zergRush_busybox_su", run runme.bat, phone reboots.
3. take off battery, go to bootloader again(volume down+home+power on), run ODIN, click PDA, select S6500DXXLC4, click START. you can flash your region firmware of course. download at sammobile.com
4. well done
http://forum.xda-developers.com/atta...3&d=1340552704

Untested by me, flash it as your own risk.

@cdesai - a bit more informations about this img file?

reaper7md said:
@cdesai - a bit more informations about this img file?
Click to expand...
Click to collapse
stock XXLC4 with root

i dont understand. Does it root my SGM2?

Could you detail how must we do?
If we work with odin, what are files we put into Phone, PDA and CSC

The ustrugg
I think You must have a onefile firmware package (tar.md5),
then untar it, replace boot.img and tar again.
Probably you must remove md5 and leave only tar extension
because odin give you error with bad md5 checksum
In odin select "onefile" package (PDA)

how to extract one package (in linux)
extract one package:
tar xfv firmware.tar.md5
pack image:
tar -H ustar -c system.img.ext4 boot.img recovery.img fat.bin cache.img.ext4 hidden.img.ext4 > firmware.tar
add md5 sum:
md5sum –t firmware.tar >> firmware.tar
rename firmware.tar to firmware.tar.md5
mv firmware.tar firmware.tar.md5
my advice when flashing use a laptop with battery at 100% turn off everything antivirus ..... phone battery @ 100%
make sure you turn off power saving features off on laptop
before flashing modified boot.img flash unchanged image to check if everything is ok

anyone has try it..plese report it..
too worried for beginners even they ever do odin in other gadget..
thanks for sharing,,nice...

Im yoo nooby i will wait for noobfriendly guide
Sent from my GT-6500D using Tapatalk

Zedd247 said:
Im yoo nooby i will wait for noobfriendly guide
Sent from my GT-6500D using Tapatalk
Click to expand...
Click to collapse
I think me too.
Sent from my GT-S6500 using XDA

Have a go.
I don't have Mini 2.
I have not tested this boot.img by cdesai.
I've made it into an odin flashable package.
Select it in PDA.
select ur .pit
flash. (in download mode obviously)
Then download Superuser app from Play Store.
For S6500D
http://www.mediafire.com/?ryr0y7z1tavrhm1
DWYOR. This will not brick ur phone but if it's a mess head to samfirmware n flash to stock

HELP
can but if you know the backup stock boot.img .. I will do this .. please update me an easy way to root this s6500 .. THANKS

RangerCrew89 said:
can but if you know the backup stock boot.img .. I will do this .. please update me an easy way to root this s6500 .. THANKS
Click to expand...
Click to collapse
There is always samfirmware to get stock firmware/boot.img so y the need to back it up...

OK OK
because I just bought this s6500 For 2Days ago .. I am afraid there is no Stock s6500 firmware for this so if there was child's play to ROOT SGM2? If you know how to backup all STOCK FIRMWARE, I will use this boot.img ok ?
---------- Post added at 02:13 PM ---------- Previous post was at 02:07 PM ----------
roofrider said:
There is always samfirmware to get stock firmware/boot.img so y the need to back it up...
Click to expand...
Click to collapse
now i will update...then you gve me this Stock boot.img S6500DXLD1
[karnel version]
2.6.38.6
[email protected]#1
OK :good:

RangerCrew89 said:
because I just bought this s6500 For 2Days ago .. I am afraid there is no Stock s6500 firmware for this so if there was child's play to ROOT SGM2? If you know how to backup all STOCK FIRMWARE, I will use this boot.img ok ?
Click to expand...
Click to collapse
No, cant backup.
Are s6500 and s6500d both the same?
I see only firmware for s6500d at samfirmware, safe to assume both are same? i dont know.
This boot.img is for s6500d so maybe u should wait for some1 with that model to test it.
It'll not result in a brick, i cant say the same for different phone models.

RangerCrew89 said:
because I just bought this s6500 For 2Days ago .. I am afraid there is no Stock s6500 firmware for this so if there was child's play to ROOT SGM2? If you know how to backup all STOCK FIRMWARE, I will use this boot.img ok ?
---------- Post added at 02:13 PM ---------- Previous post was at 02:07 PM ----------
now i will update...then you gve me this Stock boot.img S6500DXLD1
[karnel version]
2.6.38.6
[email protected]#1
OK :good:
Click to expand...
Click to collapse
you got s6500 or s6500D?
sammobile has only for s6500D
the only s6500 i found was this http://www.tsar3000.com/Joomla/inde...xy-mini2-firmwares&catid=55:samsung&Itemid=82
which is actually exactly what i have for stock

HELP
roofrider said:
No, cant backup.
Are s6500 and s6500d both the same?
I see only firmware for s6500d at samfirmware, safe to assume both are same? i dont know.
This boot.img is for s6500d so maybe u should wait for some1 with that model to test it.
It'll not result in a brick, i cant say the same for different phone models.
Click to expand...
Click to collapse
is not the same .. s6500 with other s6500d karnel so when I switch to the stock s6500 XXLA1 DXLD1 not the same as if I update the firmware so this boot.img my s6500 will damage it, I hope you understand :angel: :crying: :crying:

RangerCrew89 said:
is not the same .. s6500 with other s6500d karnel so when I switch to the stock s6500 XXLA1 DXLD1 not the same as if I update the firmware so this boot.img my s6500 will damage it, I hope you understand :angel: :crying: :crying:
Click to expand...
Click to collapse
yes, since it's a new phone u'll have to wait.
Those with s6500d can try that, it'll not brick.
If something is messed up there is samfirmware.

RangerCrew89 said:
is not the same .. s6500 with other s6500d karnel so when I switch to the stock s6500 XXLA1 DXLD1 not the same as if I update the firmware so this boot.img my s6500 will damage it, I hope you understand :angel: :crying: :crying:
Click to expand...
Click to collapse
well we(s6500) need someone that can edit .smd.tar from tha link i gave above...
you can try what you want and then flash what i gave above to return to stock...

Flashing Via Odin (One Package)

(TUT) FLASHING ODIN VIA ONE PACKAGE
who have problem on flashing firmware one package that get stuck on 'setup connection' or get 'failed' ..
there have a solution for who didn't know..
download firmware from www.sammobile.com
need samsung usb driver to detect phone and odin.
or install samsung kies.
then need odin3 .. i have it..
from '[email protected] thanks to him..
and here is the new odin3 v 3.07 http://www.4shared.com/zip/_OYyK4Sq/Odin3_v307.html ..
and put the file on PDA without .pit file and no need to tick or click anything..
just let it like that..
sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..

SemBoyHehe said:
who have problem on flashing firmware one package that get stuck on 'setup connection' and get 'failed' .. there have a solution for who didn't know.. download firmware from www.sammobile.com then need odin3 .. i have it.. from '[email protected] thanks to him.. and here is the new odin3 v 3.07 http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html .. and put the file on PDA without .pit file and no need to tick or click anything.. just let it like that.. sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
Click to expand...
Click to collapse
I was tested it a few moment ago and i must say . . . IT WORKS !! For newbies and noobs, you must put the *.tar.md5 (the rom file) only in PDA section and select START only if you plugged in your phone is in Download Mode and of course +1 for you

Alucard1989pl said:
I was tested it a few moment ago and i must say . . . IT WORKS !! For newbies and noobs, you must put the *.tar.md5 (the rom file) only in PDA section and select START only if you plugged in your phone is in Download Mode and of course +1 for you
Click to expand...
Click to collapse
don't forget tell all n click the thanks button if i helped..

SemBoyHehe said:
who have problem on flashing firmware one package that get stuck on 'setup connection' and get 'failed' .. there have a solution for who didn't know.. download firmware from www.sammobile.com then need odin3 .. i have it.. from '[email protected] thanks to him.. and here is the new odin3 v 3.07 http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html .. and put the file on PDA without .pit file and no need to tick or click anything.. just let it like that.. sorry mirror it [email protected]
PLEASE HIT THANKS BUTTON if helped..
Click to expand...
Click to collapse
Thanks alot for this tutorial
easy and quite helpful.
you and rafael just saved my aceI :good:
Thanks

soumik shah said:
Thanks alot for this tutorial
easy and quite helpful.
you and rafael just saved my aceI :good:
Thanks
Click to expand...
Click to collapse
small problem man.

Bro just wnted to ask that i am on Jelly blast rom now and want to move on stock rom so i have the firmware and odin v3.0.7 so just i hav to
1.go to download mode
2.just choose the pda file
3.connect cell to pc
4.click start??
m i right?

aniket123 said:
Bro just wnted to ask that i am on Jelly blast rom now and want to move on stock rom so i have the firmware and odin v3.0.7 so just i hav to
1.go to download mode
2.just choose the pda file
3.connect cell to pc
4.click start??
m i right?
Click to expand...
Click to collapse
Yes

yes. if can. flash multi package.

Sad
SemBoyHehe said:
yes. if can. flash multi package.
Click to expand...
Click to collapse
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!

aniket123 said:
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
Click to expand...
Click to collapse
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??

SemBoyHehe said:
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
Click to expand...
Click to collapse
Country-India-INS
Multi Pakage goes tough for me or if you are free can u give me the steps????

aniket123 said:
Country-India-INS
Multi Pakage goes tough for me or if you are free can u give me the steps????
Click to expand...
Click to collapse
Download the firmware of your choice from here:
http://forum.xda-developers.com/showthread.php?t=1822109
You can use Odin 1.84 or 3.07.
PDA goes in PDA
Phone in Modem
CSC in CSC
Don't touch anything else.

1.84 need pit. without .pit it will fail
3.07 is better no need .pit file.

SemBoyHehe said:
which country are you from? better u flash multi package that have pda, modem and csc file. search on development section. are u already install kies/samsung usb driver? odin detect? have comort??
Click to expand...
Click to collapse
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:

aniket123 said:
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
Click to expand...
Click to collapse
Bootloader..?? Where did you get that?
What error you are getting?

aniket123 said:
i did Multi pakage also it also doesnt work out for me
I had put PDA in PDA,MODEM in PHONE,MULTI CSC in CSC,BOOTLOADER in BOOTLOADER and PIT file of ODIN version 1.84 :crying:
Click to expand...
Click to collapse
Are u read my 1st post? Why use odin 1.84?? Use odin v3.07. No need put .pit just put pda, modem and csc only. Hmm. Read first man.

aniket123 said:
It showed failed check the process
1.downloaded firmware
2.opened odin and put in the PDA file
3.went in download mode and connected to pc
4.started the process
5.it failed
if i was wrong please correct me!
Click to expand...
Click to collapse
if you are using windows 7.then while opening odin,,donot double click.right click first then select RUN AS ADMINISTRATOR.....it wont fail then..i guess

SemBoyHehe said:
Are u read my 1st post? Why use odin 1.84?? Use odin v3.07. No need put .pit just put pda, modem and csc only. Hmm. Read first man.
Click to expand...
Click to collapse
Brother i have done it with odin v3.0.7 as well as odin v1.8.4
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
Ankur19 said:
if you are using windows 7.then while opening odin,,donot double click.right click first then select RUN AS ADMINISTRATOR.....it wont fail then..i guess
Click to expand...
Click to collapse
User of Windows XP

Thanxx..
Sent from my GT-S5830i using xda premium
....
Hit ThanX If I helped you !!

Lalit Patil said:
Thanxx..
Sent from my GT-S5830i using xda premium
....
Hit ThanX If I helped you !!
Click to expand...
Click to collapse
did that help??

[Q] Samsung GT-I8190 Pit files???

Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany

roxy2906 said:
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
Click to expand...
Click to collapse
I need it too, pleeeeeese :fingers-crossed:

Use the file at the bottom of the page h t t p:/ / forum.xda-developers.com/showthread.php?t=1987976&page=2 . The param.tar file. I had the same problem and for me worked. Now my phone is "alive". Flash it with Odin 1.85 as PDA file.

zeek12 said:
Use the file at the bottom of the page h t t p:/ / forum.xda-developers.com/showthread.php?t=1987976&page=2 . The param.tar file. I had the same problem and for me worked. Now my phone is "alive". Flash it with Odin 1.85 as PDA file.
Click to expand...
Click to collapse
I had tried, but now I have the splash screen "Samsung SII i9100"!
Can I fix??
On my device, then, doesn't work Triangle away ("Magic header not found. Incompatible device?).
For you in the same?

http://forum.xda-developers.com/showthread.php?t=2034357

Here you go. PIT file for re-partition I8190 -> http://www.mediafire.com/?5tc1l0d3z6x2awk

Can you re upload it again? Media fire link isnt working....

Look at 1st post there's a link for Pit file, just seen it. Look where it says No Pit partition, there's link in there.
Sent from my GT-I8190 using xda premium

Pit File for s3 mini
roxy2906 said:
Hey,
I have my Samsung wrong flashed and now I need a Pitfile. Can anyone say where the Pitfilevom Samsung GT-I8190 think?
no boot into recovery mode and wipe data/cache...
Help me!!!!!
Sorry My English is not so good. I'm from Germany
Click to expand...
Click to collapse
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......

doesn't work on i8190N
Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
this pit file doesn't work with i8190N it say
SM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
my phone turns on but stuck at logo

Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
Tried this pit file to remove a i9100 splash screen on a standard I8190 but no luck.
Anybody have any ideas please?

Flash this via CWM/TWRP

Jimmys Gr said:
Here is your Pit file ....flash it alone with odin and remember to check the tick box to make repartition again.....
Had the same problem yesterday......
Click to expand...
Click to collapse
thanks my friend, I hope it's work.

opoel34 said:
thanks my friend, I hope it's work.
Click to expand...
Click to collapse
did it work??
Sent from my GT-I8190 using xda app-developers app

PIT GT-i8190L
Benzonat0r said:
Flash this via CWM/TWRP
Click to expand...
Click to collapse
andr0id_n00b said:
did it work??
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I need the pit file for my s3 mini GT-I8190L Help me plz

Is there any way to pull the pit from the phone?

woopdedoda said:
Is there any way to pull the pit from the phone?
Click to expand...
Click to collapse
Yes, a simple google can help you

AssToast said:
Yes, a simple google can help you
Click to expand...
Click to collapse
Yeah I looked really quickly but didn't see it, just tried again and found it. Thanks.

I spoke too soon...
@AssToast sorry jumped the gun, I found this but it can only edit and create new pit's. Can you post any links that you know of?

woopdedoda said:
@AssToast sorry jumped the gun, I found this but it can only edit and create new pit's. Can you post any links that you know of?
Click to expand...
Click to collapse
Install Heimdall, follow the instructions here
then read the 2nd post on how to do that http://forum.xda-developers.com/showthread.php?t=1957552

[Q] Galaxy S Plus Bootloop problem

So my phone is constantly bootloping and it seems I cant find any solution for this. I have tried to flash with stock firmaware, flash with Bootloop fixes found on this forum, with some other ROMs. But not any of these helped. And the worst part is, that when I go to Recovery I cant do anything because it proccess some code and after few seconds it reboots. Thats a big minus because I cant install any Kernel. Its just f. up. I also managed to do a hard reset with phone dial code, it didnt fix anything. Ive also tried to flash broodROM but when I load ROM inside Odin, Odin just crashes immediately.
1. How to fix Odin so it doesnt crash when I load broodROM?
2. Is it possible to flash a kernel with Odin for Gingerbread 2.3.5?
3. Any other solution?

hi
first make sûre that joue have Samsung USB driver installed and kies was unist.. then run windows un safe mode
OK to fix Odin problème using old version is better i suggest 1.85 then right click run as admin
code pda ans pit file
start

MarXhack-TN said:
code pda ans pit file
Click to expand...
Click to collapse
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks

Dr.Weed1 said:
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks
Click to expand...
Click to collapse
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608

MarXhack-TN said:
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608
Click to expand...
Click to collapse
I have downloaded the first link from post #2
http://forum.xda-developers.com/showthread.php?t=1396837

Dr.Weed1 said:
Hi,
what do you mean by that? Usually I would select "One Package" with newer version of Odin, but with 1.85 there is no such an option and I only have one file, which is tar.md5... Are u trying to say that I should load that file under every section or what? Because I dont have PIT file.
Thanks
Click to expand...
Click to collapse
MarXhack-TN said:
you should have the pit file
i think that you need a new stockrom or try searching thé pit file
sorry for my english bro
here is Odin + pit forum.xda-developers.com/attachment.php?attachmentid=436587&d=1289226608
Click to expand...
Click to collapse
try this one
it will work samsung-updates.com/details/19969/Galaxy_S_Plus/GT-I9001/KPN/I9001XXKQE.html