Related
I've tried to restock my tab many times with teamovercome guide, and then I got CWM 3 but it can't flash any of my roms. It always say assert failed, get.prob .... (status 7)
I understand that the cause is from the old version of CWM, so I tried to flash AOKB Kanged Gummy kernel which has CWM recovery 6. in it. So the CWM 6 can flash my desired roms easily. But the problem keep happen again, after I flash that kernel and install my rom, the tab keep rebooting to the CWM recovery instead of OS.
So i tri to find other kernel which has CWM > 6 but none of that exist, I I'm really frustrated right now :crying: please someone help me. Thanks a lot
Dnt knw much about Samsung but if u had made a nandroid back up restore it from recovery ... Or try to flash the stock Rom for ur tab with stock kernal n stock firmware..
If I hve helped you press the thanks button ...
sent from HTC sensation
Team ovecome guide give you cwm 5.
If your guide and files are too old, follow my signature to new one.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Team ovecome guide give you cwm 5.
If your guide and files are too old, follow my signature to new one.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
thanks alot. I follow that instruction but still, I can't flash the rom I want. It look like my tab want CWm 6 to flash those (humberos cm 10.1)
The problem is after i use cwm 6 it keep restart to the cwm 6 i don't know how to force it to boot to the OS it just stuck at the CWM recovery each time i reboot
Try CMW 6 while install it? I have same on CM9 I use CM 5 status 7 while try to install CM9
Sent from my GT-P3100 using xda premium
Pengodam said:
Try CMW 6 while install it? I have same on CM9 I use CM 5 status 7 while try to install CM9
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
yup, could you give me the kernel or anything which has CMW 6, thanks a lot. I've been searching for that all day but nothing
Dud just download CWM 6 in install via ODIN again. Just search on this forum.
Sent from my GT-P3100 using XDA Premium
If you follow overcome method to the letter (from page 7 of the guide, skip the rooting and bootloader patach and backup, etc), I guarantee you a CWM that is good to install CM9, CM10, Sapir, AOKP, Paranoid, etc, etc, etc..
Been doing it for over 100 times if you count those done by those who asked and I replied to.
One thing to remember, when you flash CM10, it first upgrades your kernel/CWM to CWM 6.0
so it seems to reboot to CWM but it isn't
It is a normal bootloop.
You need to flash the ROM zip at least 3 times to get the process going progressively.
First round, CWM upgrade, second round, BML to MTD conversion, and 3rd round ROM install.
You just have to read the message on the screen when it scrolls, don't just assume you get a bootloops and meaning it doesn't do a thing.
nhatsky said:
yup, could you give me the kernel or anything which has CMW 6, thanks a lot. I've been searching for that all day but nothing
Click to expand...
Click to collapse
Dude, need to install CWM 6 ( Download )
than copy & paste your custom ROM to SD card.
i'm not doin on same kernel, i just install CWM6 using ODIN
priyana said:
If you follow overcome method to the letter (from page 7 of the guide, skip the rooting and bootloader patach and backup, etc), I guarantee you a CWM that is good to install CM9, CM10, Sapir, AOKP, Paranoid, etc, etc, etc..
Been doing it for over 100 times if you count those done by those who asked and I replied to.
One thing to remember, when you flash CM10, it first upgrades your kernel/CWM to CWM 6.0
so it seems to reboot to CWM but it isn't
It is a normal bootloop.
You need to flash the ROM zip at least 3 times to get the process going progressively.
First round, CWM upgrade, second round, BML to MTD conversion, and 3rd round ROM install.
You just have to read the message on the screen when it scrolls, don't just assume you get a bootloops and meaning it doesn't do a thing.
Click to expand...
Click to collapse
No no, i read but my problem is when i follow your signature's link to the guide until I install the Overcome 7 4.1.0, but the recovery said that "can't open, ... the rom bad" so I try to flash custom rom like CM9, and it say assert failed (status 7) all the time I try to flash. The bootloop is not here
So i flash a kernel called "Kanged Gummy p1" which has CwM 6, this is when the bootloop problem occur. So I think my solution now is the new kernel which has Cwm 6
Pengodam said:
Dude, need to install CWM 6 ( Download )
than copy & paste your custom ROM to SD card.
i'm not doin on same kernel, i just install CWM6 using ODIN
Click to expand...
Click to collapse
So are you sure this is compatible with GT-P1000, it's Galaxy Nexus.
Search : How to flash ClockworkMod Recovery for the Galaxy Tab P1000 via androidauthority
- You need to run on original stock & just flash back to orginal stock rom..
- You need to run Clockworkmod 5
P/S, why you play around custom ROM on unsupported device? daaa
You didn't follow correctly.
After GB stock safe v5, if you flash overcome kernel 4.0 tar via odin, then boot to cwm 5, and flash cm, impossible to get assert failure.
Sent from my GT-P1000 using xda app-developers app
Get some outside air, before proceed.
From GT-P3100 via XDA Premium
Dont flash it..it is for nexus, as you said...our device supports only modded cwms
Sent from my GT-P1000 using xda app-developers app
priyana said:
You didn't follow correctly.
After GB stock safe v5, if you flash overcome kernel 4.0 tar via odin, then boot to cwm 5, and flash cm, impossible to get assert failure.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I don't know why, my GT-p1 may have been damaged lately or sth, I followed step to step that guide, then i boot to cwm 5 and flash this -> Overcome_7_Series_v4.1.0_NoWipe.zip Mediafire <-- but it say "can't open the .."directory of the file"... the rom is bad ..."
So I didn't follow it, I flash cm9.0.0 stable rls and get "assert failed ... status 7"
My tab may be different somehow cause I have tried many method but it get error unlike the instruction
So I think I just need cwm 6 kernel individually to flash, could you help me
Pengodam said:
P/S, why you play around custom ROM on unsupported device? daaa
Click to expand...
Click to collapse
huh, what do you mean ? I have been used CM10.1 for Galaxy Tab just a couple days ago
probably both your overcome wipe rom and cm9 are bad downloads
priyana said:
probably both your overcome wipe rom and cm9 are bad downloads
Click to expand...
Click to collapse
maybe the overcome rom is bad, but i'm still able to flash cm9 it with cwm 6 via kernel called Kanged Gummy from http://forum.xda-developers.com/showthread.php?t=1747128 . But error and error occur again. U see, though I flash it successfully with Cwm 6. but i got cwm recovery bootloop too bad.
any update on this.
Using GT-P3100 via XDA Premium
CWM3 = chainfire kernel
CWM5 = voodoo kernel
CWM6 = AOSP and AOKP kernel thats mean CM9/10 and parandroid
Until now theres "no release" kernel with CWM6 for stock/custom rom but its easy for kernel dev like humberos to add that on stock kernel..
Pengodam said:
any update on this.
Using GT-P3100 via XDA Premium
Click to expand...
Click to collapse
hmmm no, I'm still stuck with Overcome 4.1.0 rom which I really don't like, but I can't do anything :
savie said:
CWM3 = chainfire kernel
CWM5 = voodoo kernel
CWM6 = AOSP and AOKP kernel thats mean CM9/10 and parandroid
Until now theres "no release" kernel with CWM6 for stock/custom rom but its easy for kernel dev like humberos to add that on stock kernel..
Click to expand...
Click to collapse
Wow, I hope that would release soon, do u know that guy, can u help me to make one for all of us
i don't know why I can't install AOKP, CM10.1 custom rom with CWM 5. It always said assert error, stt 7 can't open emc/..../... even after I restock
i have been flashing roms now since january this year. I've already flashed a lot for both the Gio and the Ace.
Now I'm running into this same problem again with several roms:
when I want to flash the rom, it returns me a status 7 error. Why? I don't know. I've tried already so much: md5 checksum, downloading again, formatting my sdcard partition
I have it with many roms (cm 7 blackhawk / firekernel, cm 10.1.1 mardon, cm10 maclaw etc etc).
I would like to find out what the problem is and possibly how I can solve it.
Maybe there is a problem with your recovery install. You could try to install that again.
Try to toggle signature verification in cwm. Or just reflash the recovery.
Sent from my Galaxy Ace GT-S5830 using xda premium
Venomous Viper 119 said:
Try to toggle signature verification in cwm. Or just reflash the recovery.
Sent from my Galaxy Ace GT-S5830 using xda premium
Click to expand...
Click to collapse
should i download a new recovery or the same i already had? (file name: recovery-clockwork-5.0.2.6-galaxyace-fix.zip)
DutchArjo said:
should i download a new recovery or the same i already had? (file name: recovery-clockwork-5.0.2.6-galaxyace-fix.zip)
Click to expand...
Click to collapse
Just download the same file again. I use the same one.
nikwen said:
Just download the same file again. I use the same one.
Click to expand...
Click to collapse
thanks. I've tried this but even reflashing my cwm file returns a status 7 error
but flashing my px-cwm v2.zip recovery completed.
I managed to install cwm 6.0.3.2 (although it still says 5.0.2.6) and still i'm getting all these status 7 errors.
the error is " assert failed". Is it possible that cwm isn't able to "read" the several getprop requests from my phone?
Or should the line in script update be changed with removing the spaces between the getprop for cooper and the getprop for gt-s5830?
DutchArjo said:
thanks. I've tried this but even reflashing my cwm file returns a status 7 error
Click to expand...
Click to collapse
Ok. In that case there is an error with your recovery.
@The Others: Would it help to flash a Samsung Firmware via Odin? Would that replace the recovery?
I managed to install cwm 6.0.3.2 and still i'm getting all these status 7 errors.
the error is " assert failed". Is it possible that cwm isn't able to "read" the several getprop requests from my phone?
Or should the line in script update be changed with removing the spaces between the getprop for cooper and the getprop for gt-s5830?
DutchArjo said:
I managed to install cwm 6.0.3.2 and still i'm getting all these status 7 errors.
the error is " assert failed". Is it possible that cwm isn't able to "read" the several getprop requests from my phone?
Or should the line in script update be changed with removing the spaces between the getprop for cooper and the getprop for gt-s5830?
Click to expand...
Click to collapse
Try it if you know what you are doing.
nikwen said:
Ok. In that case there is an error with your recovery.
@The Others: Would it help to flash a Samsung Firmware via Odin? Would that replace the recovery?
Click to expand...
Click to collapse
Hi nikwen, yes, to flash via Odin will replace the recovery with the stock recovery. Cheers.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN
BajoPrimate said:
Hi nikwen, yes, to flash via Odin will replace the recovery with the stock recovery. Cheers.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN
Click to expand...
Click to collapse
i've flashed a stock rom with mobile odin.
After that: i've tried to flash the cm10.1.3 rom from mardon. It returned a status 0 error. After that, I've flashed cwm 6.0.3.2 and tried to flash the rom again. Still a status 7 error.
Is it possible that maclaw's cm9 or cm10 have changed something in my Phone which causes that i'm unable to flash anything anymore? I only get status 7 errors. When i follow the suggested steps at XDA to get rid of these errors (read: delete the assert lines in updater script) the status 7 errors are replaced by status 6 errors.
when i'm in cm9 and execute getprop in terminal, the ro.product.build / devide / model = cooper (no gt-s5830).
the label on my Phone (which is located underneath the battery) says gt-s5830.
How do I get rid of the maclaw history and return to the completely Original rom to see if I can flash from there?
DutchArjo said:
i've flashed a stock rom with mobile odin.
After that: i've tried to flash the cm10.1.3 rom from mardon. It returned a status 0 error. After that, I've flashed cwm 6.0.3.2 and tried to flash the rom again. Still a status 7 error.
Is it possible that maclaw's cm9 or cm10 have changed something in my Phone which causes that i'm unable to flash anything anymore? I only get status 7 errors. When i follow the suggested steps at XDA to get rid of these errors (read: delete the assert lines in updater script) the status 7 errors are replaced by status 6 errors.
when i'm in cm9 and execute getprop in terminal, the ro.product.build / devide / model = cooper (no gt-s5830).
the label on my Phone (which is located underneath the battery) says gt-s5830.
How do I get rid of the maclaw history and return to the completely Original rom to see if I can flash from there?
Click to expand...
Click to collapse
Are there differences between Odin and Mobile Odin? If there are some, flashing using the desktop one might help.
Cooper is the codename for our Ace. So that is ok.
I've tried 2 stock roms now. Neither can boot. I've reflashed the 5.0.2.6 cwm recovery because that one is the only one that can restore my cm9 backup. I'm lost... I don't know what to do now because there is simply no way of getting a different rom on this Phone and i would really like to know why.
What did maclaws rom do that f*ck*d up my Phone?
DutchArjo said:
I've tried 2 stock roms now. Neither can boot. I've reflashed the 5.0.2.6 cwm recovery because that one is the only one that can restore my cm9 backup. I'm lost... I don't know what to do now because there is simply no way of getting a different rom on this Phone and i would really like to know why.
What did maclaws rom do that f*ck*d up my Phone?
Click to expand...
Click to collapse
You could send them an email.
Flash stock via PC using odin. You will be stuck in a bootloop. Reboot into recovery & factory reset. Reboot & phone boots. Now, important , you cannot flash custom Roms via stock recovery. Place the cwm 5.0.2.6 zip on sd card. Reboot into recovery , select " install update from sd card ", select the zip file, select yes & reboot. Again reboot into recovery, do full wipes & select " install zip from sd card " & NOT " install update from sd card " & flash any stock based Rom like Touchwiz 5 by Nathan. If you follow this, everything must be fine.
Sent from my Galaxy Ace GT-S5830 using xda premium
nikwen said:
You could send them an email.
Click to expand...
Click to collapse
YEs... I managed to flash px recovery 0.4 (again: I still had to delete the assert lines from updater script). Now I was able to flash the cm 10.1.3 rom from Mardon. Just booted for the first time. Hopefully my status 7 errors are now history... (i don't know if I can restore my cm9 backup from maclaw but we will see).
DutchArjo said:
YEs... I managed to flash px recovery 0.4 (again: I still had to delete the assert lines from updater script). Now I was able to flash the cm 10.1.3 rom from Mardon. Just booted for the first time. Hopefully my status 7 errors are now history... (i don't know if I can restore my cm9 backup from maclaw but we will see).
Click to expand...
Click to collapse
Great.
Do you want to restore it? I prefer 4.2.2.
i prefer not. But it depends on how satisfied I am on this cm 10.1.3 rom. And how many bugs / errors I experience, How smooth/fast it is etc.
When I'm not satisfied, I can Always return to this rom I was most satistied off so far. But I wanted another rom because I have a lot spontaneous reboots when turning on Wifi again....
DutchArjo said:
i prefer not. But it depends on how satisfied I am on this cm 10.1.3 rom. And how many bugs / errors I experience, How smooth/fast it is etc.
When I'm not satisfied, I can Always return to this rom I was most satistied off so far. But I wanted another rom because I have a lot spontaneous reboots when turning on Wifi again....
Click to expand...
Click to collapse
In case like yours a fresh often install helps, too.
nikwen said:
In case like yours a fresh often install helps, too.
Click to expand...
Click to collapse
it might, but it also means reinstalling all my apps again. And I do not want to do that
hopefully, this cm10 rom is satisfying enough. I will then stick to it...
Hi, i have installed SlimBean ROM on my Note and CWM Recovery 6.0.3.2.
I read on forums that for latest CyanogenMod 10.2 i need newer CWM Recovery(ccurrent version 6.0.3.8).
I search how to upgrade to latest CWM Recovery and i found this:
http://forum.xda-developers.com/showthread.php?t=2201860
And here is link for download latest version for N7000:
http://d-h.st/users/philz_touch/?fld_id=25295#files
But i'm confused now, is on that link only CWM Recovery or is that Kernel with CWM?
Can i flash that file through current CWM Recovery (zip file) and get latest CWM Recovery Version?
Or can you tell me how to get latest CWMR Version.
I don't want use Custom ROM's based on Samsung firmware, i prefer CM based Custom ROM's (SlimBean and Bam Andorid),
so that's reason why i'm confused most about upgrading CWMR.
Thanks
You will have to use a kernel which has updated recovery.
please send me xda clockworkmod recovery for galaxy gt-n7000 for omni and tell me how to install
fantasy24 said:
please send me xda clockworkmod recovery for galaxy gt-n7000 for omni and tell me how to install
Click to expand...
Click to collapse
This has been told to you in a lot of threads.
Not able to install 4.4.2 it says error 7 n7000
Hi,
I installed cwm PhilZ-cwm6-XXLTA-ATL-5.15.0-signed recovery from your post which works fine the touch etc. but after when in try to install 4.4.2 in recovery mode, it says (SET_METADATA_RECURSIVE: SOME CHANGES FAILED E: ERROR IN /EMMC/N7000-STABLEv1.zip (STSTUS 7)) and cannot install. the same message for Google app too. is there any thing else i have to do. I have n7000 and i am not very good in gadgets but you know i want to try kitkat.
My phone is not rooted. so in just installed PhilZ-cwm6-XXLTA-ATL-5.15.0-signed. and I have downloaded N7000-STABLEv1 but always get the same message above. I thought just by installing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed i can install any custom rom.
I need help. thanks
rajdeep.sandhu said:
Hi,
I installed cwm PhilZ-cwm6-XXLTA-ATL-5.15.0-signed recovery from your post which works fine the touch etc. but after when in try to install 4.4.2 in recovery mode, it says (SET_METADATA_RECURSIVE: SOME CHANGES FAILED E: ERROR IN /EMMC/N7000-STABLEv1.zip (STSTUS 7)) and cannot install. the same message for Google app too. is there any thing else i have to do. I have n7000 and i am not very good in gadgets but you know i want to try kitkat.
My phone is not rooted. so in just installed PhilZ-cwm6-XXLTA-ATL-5.15.0-signed. and I have downloaded N7000-STABLEv1 but always get the same message above. I thought just by installing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed i can install any custom rom.
I need help. thanks
Click to expand...
Click to collapse
Read how to on flashing kitkat roms... hint: raw kernel
Raw Kernel
nokiamodeln91 said:
Read how to on flashing kitkat roms... hint: raw kernel
Click to expand...
Click to collapse
Hi,
Did installed raw kernel but still getting same error status 7. even enabled toggle signature verification but still.
thanks
rajdeep.sandhu said:
Hi,
Did installed raw kernel but still getting same error status 7. even enabled toggle signature verification but still.
thanks
Click to expand...
Click to collapse
after installing raw kernel , did you reboot recovery or still doing it on touch one?
nokiamodeln91 said:
after installing raw kernel , did you reboot recovery or still doing it on touch one?
Click to expand...
Click to collapse
LOL
Done flashing "PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5" and after reboot to recovery, its only black screen, but I can feel the vibrate when touch the screen. What to do now?
CWM dowload link for Note 1 is not work !!
Hi,
the download link for the CWM Note N7000 is nor working!!
Any help please !!!
links are full of virus and ads but no files ...
Please update the links!
Please update the links when I click on them it gets me to a page but the file is not available! Please update the links!
I was trying to install CM11. Tried installing the zip from external memory and from an SD. Tried four different versions of CM but here's the message I always get:
This package is for "m3, m3xx, i9305, GT-I9305" devices:
this is a "m0"
E: Error in /sdcard/cm-11-20140117-NIGHTLY-i9305.zip
(Status 7)
Installation aborted.
Could it be that Samsung Knox has something to do with this error? Root gone wrong? I am unable to check the root status since Knox is closing superSU.
I would appreciate all the help I can get.
Samsung Galaxy S3 GT-I9305 4.3 official firmware
Maybe you got the wrong (outdated) Recovery. Try to flash latest Recovery (cwm vor TWRP) and that should work! :thumbup:
Sent from my GT-I9305 using xda app-developers app
Christian1981 said:
Maybe you got the wrong (outdated) Recovery. Try to flash latest Recovery (cwm vor TWRP) and that should work! :thumbup:
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Problem solved. Latest cwm did the trick, ty.
Please hit thanks if i helped you. Best regards
Sent from my GT-I9305 using xda app-developers app
I have tried a few different CM11 ROM's and its all has failed... initially I got the error message
"This package is for "m3, m3xx, i9300, GT-I9305" devices:
this is a "m3"
I then looked for the GT-I9305 ROM and now i am getting a different error message... pic attached...
Can anyone help please...
What i did... I clicked Install, chose the ROM(latest cm-11-20140909), then Add More Zips and selected gapps-kk-20140606-signed.zip (which i downloaded from wikipedia)
and its showing failed... And i did a factory reset before I did the above....
Please Help...
View attachment 2930864
I also tried with TWRP 2.6.3.0, thot it might be the recovery tool somehow.... but still no luck
navhonda84 said:
I also tried with TWRP 2.6.3.0, thot it might be the recovery tool somehow.... but still no luck
Click to expand...
Click to collapse
Have you tried using Philz?
http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953
Make sure you click the i9305 button and check the file name before flashing it otherwise you will hardbrick your phone.
Use Phil recovery or CWM, twrp has been giving me problems since 2.6.0.0. I am currently using cwm touch, besides a few freezes (which was fixed by pulling the battery) I didnt get any errors or problems with it
hi,
when i go into recovery I become the dead android with red triangle, and I cant install any custom rom because of : warning No file_contextsset_metadata_recursive: some changes failed (Status 7)
but I can install stock Rom via odin, but also when I go into recovery I had there red triangle, then flashed Fhilz kernel it works, but the error above
Please help me !
No need to worry of the dead bot. And you cannot flash anything using the stock recovery..
and how to install custom rom when I become Status 7?
The first step is make sure you install PhilZ kernel sucessfully. Then bootbinto PhilZ touch recovery. From there you can install a custom rom.
Sent from my GT-N7000 using Tapatalk 2
I had install Philz for XXLT5 via odin, boot into recovery and try to flash 4.4.2 rom and became error to CarbonRom : set_metadata_recursive (Status 7 )
to OmniROM: warning No file_contextsset_metadata_recursive: some changes failed (Status 7)
From Philz you need to install raw kernel, then install 4.4.2.
Sent from my GT-N7000 using Tapatalk 2
P_E_T_O said:
I had install Philz for XXLT5 via odin, boot into recovery and try to flash 4.4.2 rom and became error to CarbonRom : set_metadata_recursive (Status 7 )
to OmniROM: warning No file_contextsset_metadata_recursive: some changes failed (Status 7)
Click to expand...
Click to collapse
Before you flash.. you need to read more the OP of the rom you are flashing.
I have install the F***ing rom from sammobile because i want try some app..
I will try the raw kernel.. thanks
it works with raw thanks!!
P_E_T_O said:
it works with raw thanks!!
Click to expand...
Click to collapse
...