Aborted updates, bootloop - Xperia Z Q&A, Help & Troubleshooting

Xperia z
I got a unit that should be revived because unfortunately the link was interrupted update.
If the charger plugged in., 3 and quiver just keep bootloop
The image does not appear ..
I can not enter into Recovery ...
What can be done?

Try to flash with Sony Update Service or with flashtool.
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
If you use SUS your data will be gone but I thinks that isnt the biggest problem right now ^^
Gesendet von meinem C6603 mit Tapatalk

gripfly said:
Try to flash with Sony Update Service or with flashtool.
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
If you use SUS your data will be gone but I thinks that isnt the biggest problem right now ^^
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
The problem is that the phone is completely discharged and I can not turn it off!
If I connect to a data cable, straight starts, and copper 3, then reboot ...
Continuous loops only!

Aha ok, yeah that is a really bad situation. ^^
now only I dont understand what you mean with the copper?
You mean that yiu tryed it with dockingstation or what?
Gesendet von meinem C6603 mit Tapatalk

gripfly said:
Aha ok, yeah that is a really bad situation. ^^
now only I dont understand what you mean with the copper?
You mean that yiu tryed it with dockingstation or what?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
AA is not copper!
I'm sorry ..
3 vibrates and start again!
and no picture, I can not reach the bootloader and not recovery!
any combination not respond!

szunyi77 said:
AA is not copper!
I'm sorry ..
3 vibrates and start again!
and no picture, I can not reach the bootloader and not recovery!
any combination not respond!
Click to expand...
Click to collapse
enter flashmode and flash stock rom? will lost root and mods but not your data

Jambu95 said:
enter flashmode and flash stock rom? will lost root and mods but not your data
Click to expand...
Click to collapse
I do not know unfortunately.
I do not know how to rom it may be
I have not messed up, I do not know what they did to him!

szunyi77 said:
I do not know unfortunately.
I do not know how to rom it may be
I have not messed up, I do not know what they did to him!
Click to expand...
Click to collapse
What? To rom it? What does it mean?
If you hold volume up and power during the boot, up to the 3 vibrates and then shutting off the phone. After you plug in the charger it will charge or always the same?
Gesendet von meinem C6603 mit Tapatalk

if you do not plug into the charger, the device does not boot!
If you connect a charger or data cable then vibrates 3​​, the red LED will flash and start again!
Unfortunately, I can not do anything with it!
the solution would be to spend so?

And flash mode? Volume down holding during plug in the cable to the pc. For the flashmode it doesnt have to boot i think
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 04:52 PM ---------- Previous post was at 04:51 PM ----------
And using newest flashtool
Gesendet von meinem C6603 mit Tapatalk

When you join data cable and SUS, the following occurs:
We recognize the device and discarded ... We recognize the device and discarded ... This loop is now!

szunyi77 said:
When you join data cable and SUS, the following occurs:
We recognize the device and discarded ... We recognize the device and discarded ... This loop is now!
Click to expand...
Click to collapse
And If you use flashtool installing a stock firmware?

gripfly said:
And If you use flashtool installing a stock firmware?
Click to expand...
Click to collapse
I can not install on anything!
Constant loop!
I join as a cable, then the red light flashes, the phone vibrates 3​​, and re-re!

szunyi77 said:
I can not install on anything!
Constant loop!
I join as a cable, then the red light flashes, the phone vibrates 3​​, and re-re!
Click to expand...
Click to collapse
shut down the phone.
connect the cable to the XZ
opening flashtool and choose flashmode
choose FW
check wipe all data
click flash
waiting for flashtool which is during preparing for flash
if it ask fo phone volume down hold+ plug cable to pc
Click to expand...
Click to collapse
yeah but you din't it like this right?
me remembered I had the same with red light and vibrate..^^
I remember for something wait I will look for It! I hope I will find it..
If this I wrote before editing will not work try this:
http://forum.xda-developers.com/showthread.php?t=2229250&highlight=recovery

gripfly said:
yeah but you din't it like this right?
me remembered I had the same with red light and vibrate..^^
I remember for something wait I will look for It! I hope I will find it..
Is below the Sony logo!
no picture no!
only red light, vibration, and 3 ...
When you join, and I'm trying to install SUS, it is connected to drop ... connected to drop ...
I tried windows 7 and 8-8.1
If this I wrote before editing will not work try this:
http://forum.xda-developers.com/showthread.php?t=2229250&highlight=recovery
Click to expand...
Click to collapse
Thank you!
Any combination I use, I left the red light and vibration 3!
alas!
I tried to sus, but once detected, drop, drop-detect ...
I hope you understand ...
Is below the Sony logo!
no picture no!
only red light, vibration, and 3 ...
When you join, and I'm trying to install SUS, it is connected to drop ... connected to drop ...
I tried windows 7 and 8-8.1

FASTBOOT MODE: soft-brick
FASTBOOT FOR KERNEL
Connect your USB cable to your phone
Either:
Hold POWER and VOL-UP to reboot, on the instance your phone vibrates, release POWER but hold on to VOL-UP;
Press POWER, on the instance you feel your phone vibrate, press and hold VOL-UP;
If successful your phone will show a blue led to signal it is in fastboot mode.
Use the fastboot tool to flash the stock Sony kernel image.
Your phone should boot up normally again when fastboot is done.
CONSIDER YOURSELF LUCKY YOU CAN STILL USE YOUR PHONE IF YOU LOSE ANY DATA!!
Click to expand...
Click to collapse
So this you tried too and still the same?
Fu..k.. I hope we can get you Z to live again..

gripfly said:
So this you tried too and still the same?
Fu..k.. I hope we can get you Z to live again..
Click to expand...
Click to collapse
I've tried everything so far ... : (
Unfortunately, I do not want to come to life!
as cord, immediately start the loop ...
the red LED will flash and quiver 3
If there is no connection, then there is no light!
There is no blue LED!
only flashes of red!
If you join SUS, you know, you do not know, he knows, does not recognize the device!
What could it be?
What are you trying?
, (

szunyi77 said:
I've tried everything so far ... : (
Unfortunately, I do not want to come to life!
as cord, immediately start the loop ...
the red LED will flash and quiver 3
If there is no connection, then there is no light!
There is no blue LED!
only flashes of red!
If you join SUS, you know, you do not know, he knows, does not recognize the device!
What could it be?
What are you trying?
, (
Click to expand...
Click to collapse
Can you do a picture or better a short video like it looks? maybe it's helpfully, i don't know but I hope..

gripfly said:
Can you do a picture or better a short video like it looks? maybe it's helpfully, i don't know but I hope..
Click to expand...
Click to collapse
I tried, it's hard for me alone to do the video ...
I wonder what, exactly?
Which event?
we are able to advise?

Yeah what you tried yet. It dosent have to be a professional video
Show what happen you want start the phone, when you plug in the current supply, when you try to flash with pcc sus and flashtool.
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
That I/we see what you do and whats happening. Maybe if we see whats happening, we a better chance i hope
Gesendet von meinem C6603 mit Tapatalk

Related

Red light Xperia

Hello,
I have a problem with my phone, I don't know what happened but my phone isn't starting. I will describe you how it started. The phone was charging and this problem happened. So I have a red light problem with my Xperia SP and sometime it blink when i press the hold button. How could I fix this?
One time i connected the phone to the pc with a screen charging and blue led but it crashed.
The probleme is similar to this thread http://forum.xda-developers.com/showthread.php?t=2383875
Hope you can help me
Buckyngham said:
Hello,
I have a problem with my phone, I don't know what happened but my phone isn't starting. I will describe you how it started. The phone was charging and this problem happened. So I have a red light problem with my Xperia SP and sometime it blink when i press the hold button. How could I fix this?
One time i connected the phone to the pc with a screen charging and blue led but it crashed.
The probleme is similar to this thread http://forum.xda-developers.com/showthread.php?t=2383875
Hope you can help me
Click to expand...
Click to collapse
seem like kernel probs... try flashtool.. wipe all
danielhariri said:
seem like kernel probs... try flashtool.. wipe all
Click to expand...
Click to collapse
Hi thanks for response. I installed flashtool with driver but i have question is there any guide to wipe all ? Do i need a stock rom ? what about Imei key etc ?
hpics.li/9219e50
I had this on flashtool when i try to connect my phone on pc
Buckyngham said:
Hi thanks for response. I installed flashtool with driver but i have question is there any guide to wipe all ? Do i need a stock rom ? what about Imei key etc ?
hpics.li/9219e50
I had this on flashtool when i try to connect my phone on pc
Click to expand...
Click to collapse
if u really sure its a kernel probs then flash kernel only... but i recomend u to flash the whole ROM search it in android development...
once the flashtool detect ftf file there is wipe all option....
its normal nothing wrong with it..
danielhariri said:
if u really sure its a kernel probs then flash kernel only... but i recomend u to flash the whole ROM search it in android development...
once the flashtool detect ftf file there is wipe all option....
its normal nothing wrong with it..
Click to expand...
Click to collapse
I downloaded the last stock fr rom, a tft file.
Now im trying to connect the phone in pushing the volume down button but no reaction...
Battery was not full enough?
Gesendet von meinem Xperia SP
joke19 said:
Battery was not full enough?
Gesendet von meinem Xperia SP
Click to expand...
Click to collapse
I charge it since 4 hour now and when i plug it i got led red blink and it is shortly connected to computer 3 s as you can see on the image.
Have U tried with another usb cabel?
Wytapatalkowane z Xperia SP.
i solver my probleme with this http://forum.xda-developers.com/showthread.php?t=2526734 and this http://forum.xda-developers.com/showthread.php?t=1849170 with rubber band trick.
I left my phone for 2 min and it starter with 1% battery i let him charge and evrythink was ok Oo.
SO thanks for trying to helping me !

[Q] Bootloop after trying to flash a CM

So basically I've tried to flash CM but I didn't flash the CM recovery, now Im getting bootloops and I can't either start flashmode or flashtool.
Can anyone help?
tehiaz said:
So basically I've tried to flash CM but I didn't flash the CM recovery, now Im getting bootloops and I can't either start flashmode or flashtool.
Can anyone help?
Click to expand...
Click to collapse
I don't understand, what did you did?
Are you sure you can't access in flashmode?
Plug the usb cable in and press vol -
tehiaz said:
now Im getting bootloops and I can't either start flashmode or flashtool.
Click to expand...
Click to collapse
Flashtool you can start, because it's a programm for example windows.. anyway
Just a information for you: Always tell what exactly your problem is AND what you did or what happened. Because we do not know if you, for example, unlocked your bootloader or what you did wrong because we do not know what you have done. So tell us what you did step by step. Because if you learn what you did wrong, you will maybe not do the same failure again
Start flashtool and connect your phone in fastboot. what happens?
gripfly said:
Flashtool you can start, because it's a programm for example windows.. anyway
Just a information for you: Always tell what exactly your problem is AND what you did or what happened. Because we do not know if you, for example, unlocked your bootloader or what you did wrong because we do not know what you have done. So tell us what you did step by step. Because if you learn what you did wrong, you will maybe not do the same failure again
Start flashtool and connect your phone in fastboot. what happens?
Click to expand...
Click to collapse
So okay.. At start I unlocked bootloader, then I went to the recovery and flashed Cyanogen (then I got some error, i believe it said error=7) then I restarted recovery (and it didn't went to the recovery (it kinda skipped it), and I started getting bootloops, I connected the phone to computer, I entered flashmode or fastboot (can't remember which one), then I panicked, and hard-resetted the device (that was dumb as ****, i think that's the problem), and now i can turn it on (it keeps bootlooping though) but I can't enter either flashmode or fastboot and computer doesn't recognise the phone, it doesn't even see it.
I think the 2 mistakes I did was not flashing the new ClockworkMod (I flashed it in old) and then hardresetting while in flashmode or fastboot, but now I have no idea what shall I do...
Sry for not giving full information, ty for trying to help guys.
"Device disconnected" and literally nothing more after that. No matter whatever I do. I can't either enter flashmode or fastboot. Nothing. I can just turn on the phone and watch it bootlooping.
bump
is there someone who can help me? i'll be eternally grateful if someone will manage to help me fix this.
tehiaz said:
bump
is there someone who can help me? i'll be eternally grateful if someone will manage to help me fix this.
Click to expand...
Click to collapse
And you can't use recovery?
Maybe it helps if you reinstall the drivers to connect in fastboot or flashmode..
gripfly said:
And you can't use recovery?
Maybe it helps if you reinstall the drivers to connect in fastboot or flashmode..
Click to expand...
Click to collapse
Sadly I can't use it, I don't think it may help cause I don't see a green or blue led so I think it's up to phone not computer.
tehiaz said:
Sadly I can't use it, I don't think it may help cause I don't see a green or blue led so I think it's up to phone not computer.
Click to expand...
Click to collapse
Okay, so I've got update. I've tried going to flashmode/fastboot after discharging the battery and led flashes 3 times (red color).
Is that good, or not?
tehiaz said:
Okay, so I've got update. I've tried going to flashmode/fastboot after discharging the battery and led flashes 3 times (red color).
Is that good, or not?
Click to expand...
Click to collapse
Charge it now. I think the flashes shows the the battery is discharged.
gripfly said:
Charge it now. I think the flashes shows the the battery is discharged.
Click to expand...
Click to collapse
I'll get up earlier next morning and I'll try to flash kernel (can I get to recovery by flashing a stock kernel? can I flash a stock kernel now? should I flash it with flashmode or fastboot?) I have recovered fully my phone in CWM before flashing Cyanogen so I can recover this.
I think it's good that phone reacts to trying to get in flashmode. It may be a good signal.
Again thanks for help Sir.
Edit:
Btw not sure if it changes osmething but I have no red when I am charging and now I can't even start the phone. (3 red led blink)
tehiaz said:
I'll get up earlier next morning and I'll try to flash kernel (can I get to recovery by flashing a stock kernel? can I flash a stock kernel now? should I flash it with flashmode or fastboot?) I have recovered fully my phone in CWM before flashing Cyanogen so I can recover this.
I think it's good that phone reacts to trying to get in flashmode. It may be a good signal.
Again thanks for help Sir.
Edit:
Btw not sure if it changes osmething but I have no red when I am charging and now I can't even start the phone. (3 red led blink)
Click to expand...
Click to collapse
bump
tehiaz said:
I'll get up earlier next morning and I'll try to flash kernel (can I get to recovery by flashing a stock kernel? can I flash a stock kernel now? should I flash it with flashmode or fastboot?) I have recovered fully my phone in CWM before flashing Cyanogen so I can recover this.
I think it's good that phone reacts to trying to get in flashmode. It may be a good signal.
Again thanks for help Sir.
Edit:
Btw not sure if it changes osmething but I have no red when I am charging and now I can't even start the phone. (3 red led blink)
Click to expand...
Click to collapse
What now? Does you can connect your phone in fastboot or flashmode?
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
What now? Does you can connect your phone in fastboot or flashmode?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
No.. I can't even turn it on cause of led blinking 3 times. And I can't start the flashmode as well.
tehiaz said:
No.. I can't even turn it on cause of led blinking 3 times. And I can't start the flashmode as well.
Click to expand...
Click to collapse
Hold Volume up and power. What happens?
gripfly said:
Hold Volume up and power. What happens?
Nothing. Volume + power up is a shortcut for phone which is turned on. My phone is turned off.
Click to expand...
Click to collapse
What happens if you try to turn your phone on while it is connected with the charger?
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
What happens if you try to turn your phone on while it is connected with the charger?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Led flashes 3 times (red).
tehiaz said:
Led flashes 3 times (red).
Click to expand...
Click to collapse
I have no ideas more.
Maybe something of your hardware is damaged. I really don't know, nothing works like you said. That is the reason why I would say it's something with the hardware..
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
I have no ideas more.
Maybe something of your hardware is damaged. I really don't know, nothing works like you said. That is the reason why I would say it's something with the hardware..
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
I think it's due to hard-resetting while in bootloop. http://forum.xda-developers.com/showthread.php?t=1849170 I've read entire thread and I think the phone needs still a bit time to discharge... But i think 120 hours should be enough to discharge a 80% phone with screen mostly turned off.
Anyways thank you very much for helping and if you'll come with more ideas i'd be grateful.
Have a great day.

[Q][C6602] Kind of a bootloop

Good evening everyone,
I'm having an issue with my C6602 lately, I updated it to latest firmware through OTA, a day later, it just wouldn't boot up and got really hot.
I tried flashing another firmware with flashtools, succeded, but then, whenever I turn it on, I have 5 seconds max, and it reboots (unless I turn the screen off, this way it'll work, but will eventually reboot if I turn on the screen.)
I looked in the forums, and tried most of the solutions, I even reset it using sony companion.
Now I'm stuck with kind of a brick, the phone doesn't turn on, but if I plug it to a wall, it boots up, but gets stuck on lock screen (irresponsive), reboots after a while, gets stuck, reboots, then gets stuck for as long as I keep it plugged in, then turns off as soon as I unplug it and starts bootlooping until battery dies.
Anybody got any idea ? Please do ask if you need any more details.
Thanks in advance.
Before you updated you was also on stock ROM?
So flashtool recognize your phone without problems?
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
Before you updated you was also on stock ROM?
So flashtool recognize your phone without problems?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
Yes, phone is recognized by flashtool, now the issue is as follow (edited the first post too).
Phone doesn't turn on, but if I plug it to a wall, it boots up, but gets stuck on lock screen (irresponsive), reboots after a while, gets stuck, reboots, then gets stuck for as long as I keep it plugged in, then turns off as soon as I unplug it and starts bootlooping until battery dies.
Before you updated you was also on stock ROM?
Click to expand...
Click to collapse
Try to repair with Sony Update Service(SUS).
gripfly said:
Try to repair with Sony Update Service(SUS).
Click to expand...
Click to collapse
If I remember well, the phone must reach 50% battery to be repaired with SUS, but this just wouldn't happen, when the phone gets stuck on lock screen, it gets really hot, and even if I let it sit there for an hour, the battery percentage won't change much. I'll try it again anyway, there is no other method than SUS ?
Edit: It says I have the latest version installed
Huntex said:
I'll try it again anyway, there is no other method than SUS ?
Edit: It says I have the latest version installed
Click to expand...
Click to collapse
Since you get your phone recognized by SUS make sure battery is more than 50% charged and try the repair option.
SUS and flashtool is your friend i guess..
akisg said:
Since you get your phone recognized by SUS make sure battery is more than 50% charged and try the repair option.
SUS and flashtool is your friend i guess..
Click to expand...
Click to collapse
Repair option, hum, I just tried the update thing.
I'll try to leave it plugged for night (and hope it won't blow up), and then try to repair tomorrow.
I'll let you know either way.
Thanks
Huntex said:
If I remember well, the phone must reach 50% battery to be repaired with SUS, but this just wouldn't happen, when the phone gets stuck on lock screen, it gets really hot, and even if I let it sit there for an hour, the battery percentage won't change much. I'll try it again anyway, there is no other method than SUS ?
Edit: It says I have the latest version installed
Click to expand...
Click to collapse
And if it stucks on lock screen, does it turn off if you hold power and volume up(12 seconds i thought you have to hold the combination, it have to vibrate 3 times)?
gripfly said:
And if it stucks on lock screen, does it turn off if you hold power and volume up(12 seconds i thought you have to hold the combination, it have to vibrate 3 times)?
Click to expand...
Click to collapse
Yes it does, then it reboots, then gets stuck again (Sometimes it even gets stuck while there's the wave animation after the xperia logo).
Huntex said:
Yes it does, then it reboots, then gets stuck again (Sometimes it even gets stuck while there's the wave animation after the xperia logo).
Click to expand...
Click to collapse
just download an ftf and flash it via flashtool
open flashtool and connect your phone via usb cable while pressing the volume down button to enter flashmode
Rzr92 said:
just download an ftf and flash it via flashtool
open flashtool and connect your phone via usb cable while pressing the volume down button to enter flashmode
Click to expand...
Click to collapse
As I mentioned before, flashing an ftf didn't fix the bootloops, nor the freezing
Huntex said:
As I mentioned before, flashing an ftf didn't fix the bootloops, nor the freezing
Click to expand...
Click to collapse
If you flashed correctly with flashtool and SUS doesn't help also, I would say there is a hardware problem. Because more or less you can solve every software problem with your phone with a clear flash.
You don't have a recovery, right?
Gesendet von meinem C6603 mit Tapatalk
gripfly said:
If you flashed correctly with flashtool and SUS doesn't help also, I would say there is a hardware problem. Because more or less you can solve every software problem with your phone with a clear flash.
You don't have a recovery, right?
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
No recovery, no.
Im unrooted, and bootloader is locked, guess I'll have to take it back from where I bought it for a fix, it looks like a hardware problem (leaving the phone plugged for the night didn't change a thing)
Your battery has a problem, anyone would say. Try a fresh FTF install with wiping data. Also try repair. For that you need to charge your phone when it is turned off. And make sure FTF version is newer or at least same with your latest firmware worked fine.

[Q] Xperia SP does not respond at all

Hello everybody
I have a big problem with my Xperia SP. I tried to flash the last PACMAN ROM on Lollipop 5.1.1 but when I reboot my phone nothing happened. Just a dark screen with one vibration if I press on the power button. I tried to connect the phone in flash mode with my PC and it's not because my battery is down (78 percent before the flash)
Thanks for your help and I apologyse with my English but I'm French .
Stratokraken said:
Hello everybody
I have a big problem with my Xperia SP. I tried to flash the last PACMAN ROM on Lollipop 5.1.1 but when I reboot my phone nothing happened. Just a dark screen with one vibration if I press on the power button. I tried to connect the phone in flash mode with my PC and it's not because my battery is down (78 percent before the flash)
Thanks for your help and I apologyse with my English but I'm French .
Click to expand...
Click to collapse
Google for a tool named "Emma". It gets your device back to stock rom.
Then, start from scratch.
There may be faster ways, but this is the easiest-one!
And you don't have to apologize for your English, it's good enough
Gesendet von meinem
Sony Xperia SP - Cyanogenmod 12.1
Kaffeetrinker said:
Google for a tool named "Emma". It gets your device back to stock rom.
Then, start from scratch.
There may be faster ways, but this is the easiest-one!
And you don't have to apologize for your English, it's good enough
Gesendet von meinem
Sony Xperia SP - Cyanogenmod 12.1
Click to expand...
Click to collapse
Thank you for your response and for Emma, I don't know that but I found a soluce alone. If anyone had the same problem, just hold all the button and the led flash after 10 secondes. Now it works with Flashtool, just flash a Ftf Rom.

Razi XT890 Flash failed?

I finally got RSD to accept my phone and file and during process 7 it failed.
Now all I get is a Red Moto Logo?
What can I do?
Same problem here, cant access fastboot or any other recovery. equal which combination of power and vol up or down. anyone got an solution?
PlusOne3k said:
Same problem here, cant access fastboot or any other recovery. equal which combination of power and vol up or down. anyone got an solution?
Click to expand...
Click to collapse
Somehow I made my phone Boot by taking out SD card.
Try it, it boots mine ok and I may give up Updating to KK until someone replies.
Yes, that worked for me. Thanks.
Gesendet von meinem A0001 mit Tapatalk

Categories

Resources