Related
Based off of the base Samsung GT-I7510 Source.
Works with Stock 3.1 and TW UX ROMS
I am not at all responsible for what you do to your tab by installing and using this.
You must have ROOT! Also clearing cache and dalvik cache I've found does wonders after flashing.. #justsayin
07/28/2011
Added 1.504ghz for more stability
Changed voltages for stability
Fixed SETCPU Bug
Fixed Voodoo sound.. my bad..
Max GHz is automatically set to 1.2GHz to avoid stability issues. You can set them in SetCPU to whatever you like.
07/27/2011
Rebased off of pershoots but with my modifications... more to come..
360 controller should work..
Reports are good with the UX TW ROMS...
Removed GPU overclocking until I can see if it is actually helping..
Fixed charging and PC mounting issue..
Runs a lot smoother with the Ubuntu port so far
07/22/2011 Update
Included all of my modules in init.rc which means all the modules autostart and no need to use terminal to start by hand.
Fixed some install script issues.
Old update:
Project Voodoo's Voodoo sound v10 thanks to supercurio (download voodoo control app from market)
CIFS/NTFS
We now haz 1.6ghz OC! :_con: :gasp:
Compiled and included the XBox 360 controller module... Haven't tested due to no USB Dongle yet..
Lowmemory killer tweaks
Use the Latest SETCPU to change Voltages and Overclocking. It now supports full voltage control.. Im currently on 2.2.4. Available HERE.
Updated to the .4 patch.. mutch smoother..
Todo:
Suggestions??
Special thanks to:
Khasmek for dealing with my ranting...
Xoomdev also for dealing with my ranting...
R2doesinc also for dealing with my ranting..
Birdman for his words of wisdom...
Drod2169 for helping me debug voltage control
Captainkrtek for dealing with my ranting also...
To all of my testers.. couldn't do it without you.
If you would like to donate for my work and to the OMFGB/OMGB build box which I own and run click HERE
Forgot to post my githib link.... I apologize...
Http://www.githib.com/poitee
DO NOT FLASH with rom manager.. Reported issues.
Get it HERE
E.p.I.c.. got a 2880 quadrant.
Sent from my GT-P7510 using XDA Premium App
Is this compatible with 3.1 w/Touchwiz?
Testing now. Not sure if UV works. Is it suppose to? I get the prompt of selecting states not supported buttons inactive or not supported when I open up voltage control. Thanks for the kernel.
Great work !, any chance for pimpmycpu support?
I'm starting to think I got the runt of the litter as far as the cpu goes...
Hard reset @ 1GHz for me unfortunately...but voodoo sounded great until the tab locked up heh.
Source? GPL?
Good to see another Dev for the 10.1. Will try this out later.
fit333 said:
E.p.I.c.. got a 2880 quadrant.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
I'm getting 2660 on a "stock" touchwiz
I love to see 4k quadrant score like xoom
So it is working on TouchWiz?
Lot of lag, unresponsiveness for me on touchwiz rom :-( ..... And I didn't change any setting, just flashed the kernel.
Sent from my GT-I9100 using XDA Premium App
Working on Touchwiz or not? Anybody? Ill take the leap if nobody else has...
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
Did you do a full wipe? I had the same with another Oct kernel but I wiped and its good now.
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
Works great.. Good work.. But dosent seem to make it to 1.6ghz. Setcpu goes to 1600mhz but the scaling still says 1400mhz?
kirdroid said:
Lot of lag, unresponsiveness for me on touchwiz rom :-( ..... And I didn't change any setting, just flashed the kernel.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
You need to flash a pershoot kernel that has a ramdisk image before you may flash this on Touchwiz (last one was posted here http://droidbasement.com/db-blog/?p=2160). Flash the 071311 kernel, then flash this on top, should work.
Working here on TouchWiz. However, im not getting the very high quadrants scores. Best I go so far was 1800. Possibly a wipe and install will work.
SellswordShev said:
You need to flash a pershoot kernel that has a ramdisk image before you may flash this on Touchwiz (last one was posted here http://droidbasement.com/db-blog/?p=2160). Flash the 071311 kernel, then flash this on top, should work.
Click to expand...
Click to collapse
Hmm but what about the statenent: "This will not work for TouchWiz UX" ??
FrezoreR said:
Hmm but what about the statenent: "This will not work for TouchWiz UX" ??
Click to expand...
Click to collapse
It's just pershoot's official stance. He does not want to provide support for it, but if you look over his release thread you will see him explain how to get it to work on touchwiz (the short version is in my post above)
The highest quad score I got was 1939 maxed out...
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
I'd like to try this as well on Touchwiz but I am waiting for a definitive confirmation that it works well? I assume we just install the zip file from recovery? Also if it doesn't work can someone outline the process for going back, do I just re-install the Touchwiz zip package?
Thanks,
Richard
Hi everybody,
Running ViperROM right now. I want some of the features badseed wolfpack kernel has to offer. Fast charge, logo2menu, s2w, governors, thermal control...
I downloaded it and flashed it over all my data after a cache wipe. I don't see any difference, my kernel version doesn't seem to indicate that it's the wolfpack. How do I use/activate those features? I'm assuming I have to use an explorer of some sort, correct? If not, what? I tried looking it up on the interwebs but nothing seemed to help.
Thanks in advance.
sauprankul said:
Hi everybody,
Running ViperROM right now. I want some of the features badseed wolfpack kernel has to offer. Fast charge, logo2menu, s2w, governors, thermal control...
I downloaded it and flashed it over all my data after a cache wipe. I don't see any difference, my kernel version doesn't seem to indicate that it's the wolfpack. How do I use/activate those features? I'm assuming I have to use an explorer of some sort, correct? If not, what? I tried looking it up on the interwebs but nothing seemed to help.
Thanks in advance.
Click to expand...
Click to collapse
Try Trickster Mod in the play store
Sent from my HTCONE using Tapatalk 2
Tried it and kernel tuner. They don't have (or don't show) any of the features that the bad seed kernel exhibits.
Am I not supposed to use an explorer? What's up with those 0,1.2 etc?
How can I check if the kernel properly installed?
sauprankul said:
Tried it and kernel tuner. They don't have (or don't show) any of the features that the bad seed kernel exhibits.
Am I not supposed to use an explorer? What's up with those 0,1.2 etc?
How can I check if the kernel properly installed?
Click to expand...
Click to collapse
In settings about should say in kernel info. I remember there is a file you can edit to enable what you want the htc logo to do. Check kernel thread for details. I wish I could help out more but I haven't ran any custom kernels in awhile
Sent from my HTCONE using Tapatalk 2
m_plus kernel for Nexus 4 (mako)!
Hi All,
In an attempt to reduce the confusion related to the two versions of 4.3, I have decided to split my m_plus thread into 3 versions, a version for 4.2 (the previous thread: http://forum.xda-developers.com/showthread.php?t=2256887), a version for 4.3 JS AOSP builds (this one) and a version for 4.3 JW builds (not yet up, but will be in the future).
Disclaimer: As usual, I am not responsible for anything that may or may not happen to your device as a result of using this kernel or any other flashable zips posted by me in this thread.
Kernel Features:
Based on the latest Google Source for 4.3
Built with the Linaro 4.7.3 toolchain (2013.07)
insecure ramdisk (ro.recure=0, ro.debuggable=1)
init.d support (by flashing the full ramdisk, requires busybox installed to /system/xbin)
Undervolting support (down to 600mV)
Gamma Control support (motley, faux and franco interfaces available)
Faux Sound Control support including poweramp
dynamic fsync
simple GPU governor
Builds:
Sources: https://github.com/thracemerin/kernel-Nexus4/tree/m_plus_43_exp_JS
Warning: These builds are for 4.3 builds beginning with the letters JS only, if you flash it on a JW based build you will have all sorts of strange graphical issues.
Personal Request: If you plan to make unofficial builds with features not included in the builds posted by me, please don't link them in the thread, all this does is result in confusion especially if someone has a problem with something you have added, it is much easier for me to provide support if I know that everyone in the thread is running the same builds I am. If you want to make a kernel with these features, feel free to start another thread so that they can be discussed and supported as appropriate.
http://goo.im/devs/thracemerin/mako/m_plus_43/JS_builds/alphas
Latest:
Alpha 5:
Flashable (anykernel): m_plus_43_alpha_5JS.zip
Note: if you need the full ramdisk for init.d support/insecure ramdisk, flash the ramdisk package alpha 4 first.
What's Added:
USB force fast charge
Enable Krait Retention
Various patches and enhancements from CAF
Previous:
Alpha 4:
Note: The anykernel version doesn't include init.d support and insecure ramdisk unless your ROM already has it, if you were on alpha 3 you will retain it.
Note 2: If you flash the ramdisk version on CM, the built-in superuser will stop working, CM includes init.d support anyway.
Flashable (ramdisk included): m_plus_43_alpha_4JS_ramdisk.zip
Flashable (anykernel): m_plus_43_alpha_4JS.zip
What's Included:
all the stuff listed in kernel features
freezer patches by Colin Cross
Thanks:
Google
LG
Qualcomm/CodeAurora
CyanogenMod
_motley
faux123
show-p1984
franciscofranco
stratosk
anyone else I failed to mention (if you feel as though you deserved to be thanked by name, please PM me)
Reserved
PowerHAL Fix:
There is an issue in the stock AOSP powerHAL where the mpdecision touch boost requests are being sent to the wrong socket, as a result there will be unexpectedly poor UI performance. Show-p1984 fixed this problem in his Stockified AOSP build and I pulled the powerHAL and made it flashable for everyone. Just flash it in recovery and reboot, if you want to go back to the stock one just dirty flash your ROM. This shouldn't cause any problems on any ROM even if it has the fix already cooked in, but if it does you can just dirty flash your ROM to remove it. Thanks to show-p1984 for the fix.
43_powerhal_fix.zip MD5: c7cebad04b5f71d067df1a45c6e538f7
One More for Science!
Just flashed. I was losing wifi connection with semaphore when phone went into deep sleep. Ill report back. :good:
do you have to be rooted in order for init.d to work?
keda said:
do you have to be rooted in order for init.d to work?
Click to expand...
Click to collapse
Yep, need to have busybox installed too.
First of all, thanks for your work.
I want to make sure I understand the procedure correctly.
If I use CM10.2, I flash "m_plus_43_alpha_4JS.zip" to maintain the built in superuser.
init.d will still work, cause cm already supports it.
Right now I am on Alpha3 with SuperSU 1.51. So to update to alpha4 I can simply flash over.
If I want to go back to the built in superuser I have to reflash CM, then flash alpha4 via zip.
Is this correct?
Wont stay connected to Google services when phone goes into deep sleep, bars and signal are grey when i turn screen on. I thought Google fixed all the wifi issues with N4 in 4.3 kernel?
AcmE85 said:
First of all, thanks for your work.
I want to make sure I understand the procedure correctly.
If I use CM10.2, I flash "m_plus_43_alpha_4JS.zip" to maintain the built in superuser.
init.d will still work, cause cm already supports it.
Right now I am on Alpha3 with SuperSU 1.51. So to update to alpha4 I can simply flash over.
If I want to go back to the built in superuser I have to reflash CM, then flash alpha4 via zip.
Is this correct?
Click to expand...
Click to collapse
Dirty flash CM, then flash A4 should do it, that's what I did and it worked.
ScumDroid said:
Wont stay connected to Google services when phone goes into deep sleep, bars and signal are grey when i turn screen on. I thought Google fixed all the wifi issues with N4 in 4.3 kernel?
Click to expand...
Click to collapse
Strange, it's working fine for me now.
Thanks, just wanted to reply. Works as you said.
After the first boot I had some strange behaviour,
min cpu clock did not go below 1,026 ghz and GPU Clock did not go above 200 mhz.
A restart fixed it, incase somebody notices similar behaviour.
AcmE85 said:
Thanks, just wanted to reply. Works as you said.
After the first boot I had some strange behaviour,
min cpu clock did not go below 1,026 ghz and GPU Clock did not go above 200 mhz.
A restart fixed it, incase somebody notices similar behaviour.
Click to expand...
Click to collapse
Weird, I didn't notice that.
thracemerin said:
Strange, it's working fine for me now.
Click to expand...
Click to collapse
Mabye its an app i have installed. Kernel is flying btw, nice work.
Is it just me or the option to give location eve with wifi off is ****ing with repeaters... I have two access points in my house and when the option was on the wifi keep disconnecting... Maybe cause In some parts I can have signal from both access points... So weird
Sent from my Nexus 4 using xda app-developers app
ScumDroid said:
Wont stay connected to Google services when phone goes into deep sleep, bars and signal are grey when i turn screen on. I thought Google fixed all the wifi issues with N4 in 4.3 kernel?
Click to expand...
Click to collapse
+1 for this. i am also having same problem.
yash295 said:
+1 for this. i am also having same problem.
Click to expand...
Click to collapse
What ROM are you using?
thracemerin said:
What ROM are you using?
Click to expand...
Click to collapse
Cm 10.2 unofficial nightly.
Sent from my Nexus 4 using Tapatalk 4 Beta
yash295 said:
Cm 10.2 unofficial nightly.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
hmm...working perfectly for me, CM10.2 unofficial and this kernel.
thracemerin said:
hmm...working perfectly for me, CM10.2 unofficial and this kernel.
Click to expand...
Click to collapse
Oh yeah cm might be the problem. Sorry for the inconvenience
Sent from my Nexus 4 using Tapatalk 4 Beta
July 24: this is my build with Dorimanx kernel compiled with Linaro 4.9 arm-eabi and the rest compiled with Linaro 4.9 arm-linux-eabi. In short, all facets of this ROM are compiled with Linaro 4.9.
Link here: AOSB_All_Linaro
I use this as my daily driver. Works perfectly so far!
As always, I'm not responsible for any damage or problems you may experience with this ROM
ishyesh said:
This is my compiled version of AOSB 1.3.6 with two different 4.4.2 Kernels: JackpotCalvin's and Dorimanx'
JackpotCalvin:
aosb_kk_1.3.6_vs980.zip
Dorimanx:
aosb_kk_1.3.6_vs980_dorimanx.zip
I haven't had a chance to flash these yet.
As always, I'm not responsible for any damage or problems you may experience with this ROM
Click to expand...
Click to collapse
Where did u find dorimax that can run asop roms? Bout to load and flash...
Sent from my VS980 4G using Tapatalk
kenbrownstone said:
Where did u find dorimax that can run asop roms? Bout to load and flash...
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Bart from vanir patched it to make it work.
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Flashed the JC version. So far so good. Still loading up apps.
@ishyesh
Thanks again for the builds. Still haven't flashed your jackpotclavin build, I downloaded the dorimanx version, I'll give that a flash first.
Edit, nvm, I forgot Mahdi uses n5 sounds versus lg
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Running dorimanx version and it is running great. Thanks!
Lawlrus said:
@ishyesh
Thanks again for the builds. Still haven't flashed your jackpotclavin build, I downloaded the dorimanx version, I'll give that a flash first.
Edit, nvm, I forgot Mahdi uses n5 sounds versus lg
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Click to expand...
Click to collapse
So far the JC build is great. I forget how much I miss AOSP. I'm loving the hover and having Halo again. I installed V4A and the volume is great.
After running for awhile, I wasn't able to get the ROM to sleep at all. Wakelock detector really didn't show anything and neither did better battery stats.
fordmanck said:
So far the JC build is great. I forget how much I miss AOSP. I'm loving the hover and having Halo again. I installed V4A and the volume is great.
After running for awhile, I wasn't able to get the ROM to sleep at all. Wakelock detector really didn't show anything and neither did better battery stats.
Click to expand...
Click to collapse
I can confirm on the dorimanx build, that the same thing is keeping it from sleeping as well.
Seems like a lot of cm base Roms are having the issue. Gotta love cm butchering commits.
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Do core 3 and 4 not respond to any changes in CPU frequency governors? The best way to test would be to try and change the governor from conservative to performance. What should happen is that core 3 and 4 should be going full blast on the performance governor but not the conservative governor.
Thanks!
Lawlrus said:
I can confirm on the dorimanx build, that the same thing is keeping it from sleeping as well.
Seems like a lot of cm base Roms are having the issue. Gotta love cm butchering commits.
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Click to expand...
Click to collapse
ishyesh said:
Do core 3 and 4 not respond to any changes in CPU frequency governors? The best way to test would be to try and change the governor from conservative to performance. What should happen is that core 3 and 4 should be going full blast on the performance governor but not the conservative governor.
Thanks!
Click to expand...
Click to collapse
I actually tried both builds and it didn't sleep on either. I won't have time tonight but I'll restore tomorrow and give it a whirl.
Sent from my VS980 4G using Tapatalk
ishyesh said:
Do core 3 and 4 not respond to any changes in CPU frequency governors? The best way to test would be to try and change the governor from conservative to performance. What should happen is that core 3 and 4 should be going full blast on the performance governor but not the conservative governor.
Thanks!
Click to expand...
Click to collapse
Seems like cm pushed a fix for the sleep issue, at least on crDroid. I had an issue with it not sleeping, then after the build today, no issues at all.
Sent from my Vs980 running crDroid 4.4.4
Lawlrus said:
Seems like cm pushed a fix for the sleep issue, at least on crDroid. I had an issue with it not sleeping, then after the build today, no issues at all.
Sent from my Vs980 running crDroid 4.4.4
Click to expand...
Click to collapse
Good to know. I'll flash this over when there's a new build. I'd prefer the JC kernel if possible just because I won't have to redo anything on my backup. I've commenced operation "Drink Beer" already so it won't happen today. Happy 4th to all!
Sent from my VS980 4G using Tapatalk
Thanks for the update! I'll hunt down the commit and compile soon! Enjoy July 4th =)
I'm running though some trouble with SystemUI repetitive force closing on my latest AOSB builds...I have a hard time tracing what's wrong. Whenever I get a build running properly, I'll post it right away!
New builds!
Alright everyone, I've posted new builds for the vs980 with the Dorimanx and the Render kernels. I haven't had a chance to test these out yet, my phone is getting back from warranty replacement.
Also, you'll notice there are d800 builds present. I'm not going to start a thread in the LG G2 AT&T forums because AOSB officially supports d800. However, please feel free to use these. I haven't yet tested out the d800 builds either.
EDIT: I haven't seen any changes on the Beanstalk github page, so I'm going to focus my efforts on compiling AOSB for now.
ishyesh said:
Alright everyone, I've posted new builds for the vs980 with the Dorimanx and the Render kernels. I haven't had a chance to test these out yet, my phone is getting back from warranty replacement.
Also, you'll notice there are d800 builds present. I'm not going to start a thread in the LG G2 AT&T forums because AOSB officially supports d800. However, please feel free to use these. I haven't yet tested out the d800 builds either.
EDIT: I haven't seen any changes on the Beanstalk github page, so I'm going to focus my efforts on compiling AOSB for now.
Click to expand...
Click to collapse
I'll download and give them a whirl tomorrow. Have you read anything about mms issues? I know I was seeing it and I've read others were too.
Sent from my VS980 4G using Tapatalk
I downloaded and installed the render version, constant system.ui errors on the set up screen.
mjones73 said:
I downloaded and installed the render version, constant system.ui errors on the set up screen.
Click to expand...
Click to collapse
Guess i'll be holding off then. Lol
Thanks
Hi all, new build is up which is compiled with ALL linaro 4.9 toolchains. I have a vs980 in hands now, and have tested it out. ROM works flawlessly. Kernel, even more so =D
ishyesh said:
Hi all, new build is up which is compiled with ALL linaro 4.9 toolchains. I have a vs980 in hands now, and have tested it out. ROM works flawlessly. Kernel, even more so =D
Click to expand...
Click to collapse
Have you tried booting in art? Can't seem to get it working for me after removing xposed and app settinga
Sent from my LG-VS980
This is the PB1 version of NN-J kernel. It's going to go in a little different direction than the previous kernel. There are a lot of changes in PB1. That's why a new thread. And I'm not very good with Git. So may I present to you.....
NNPB1-Kernel​
This will work on the T710 and 810 Wifi only models.
You flash this at your own risk. There's the discaimer. ​
Install instructions:
You MUST HAVE ROOT and TWRP installed to flash this!!
It's built on Lollipop 5.1.1 - I have no idea what will happen if you flash this on anything else!!
Flash kernel then wipe cache and dalvic
Reboot and profit!!
Changelog
V1.2
Just enabled some more OTG stuff. It might help for some people to get it to work. But V1.1 works already.
Nothing more, so no need to update unless you want.
V1.1
Synapse enabled
More optimizations
OC/UC Big 2.2Ghz and 500Mhz. Little 1.6Ghz and 200Mhz
UV all cores
Booting frequencies up to 1.7Ghz and 1.4Ghz
Gentle fair sleepers
Hotplug
FIOPS scheduler
Enabled 650Mhz GPU clock
UC and voltage control GPU
Charge Control
V1
PB1 source
No Synapse - yet. This is as far as I can build it without synapse. I think you'll like it.
Selinux Permissive
KNOX removed
Init.d support
Enabled OTG
Updated Frandom
Govs enabled- Powersave, Conservative, Ondemand - removed Userspace
Optimizations
This is a Tablet, so I won't be adding things like I would for a phone.
______________________________
Downloads:
NNPB1-Kernel-V1.2-710
NNPB1-Kernel-V1.2-810
NNPB1-Kernel-V1.1-710
NNPB1-Kernel-V1.1-810
NNPB1-Kernel-V1-710
NNPB1-Kernel-V1-810
XDA:DevDB Information
NNPB1-Kernel-LP-T710/810, Kernel for the Samsung Galaxy Tab S2
Contributors
engine95
Source Code: https://github.com/engine95/exynos5433-BPB1-gts28-210wifi.git
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-03-27
Created 2016-03-28
Last Updated 2016-04-15
New and latest Kernel. Source makes me put this in a new thread. And I suck with Git. (Or I just know what I HAVE to know about it)
There is No Synapse interface built in yet. But don't let that stop you. It's running really good. I think you'll like it.
Edit: 810 is up. Thanks to @Billy06010 for testing
engine95 said:
New and latest Kernel. Source makes me put this in a new thread. And I suck with Git. (Or I just know what I HAVE to know about it)
There is No Synapse interface built in yet. But don't let that stop you. It's running really good. I think you'll like it.
Edit: 810 is up. Thanks to @Billy06010 for testing
Click to expand...
Click to collapse
T810 5.1.1 - Boots fine.... I'll get back in a couple days with performance.... I'm sure it's GREAT! Thanks again.
What is the advantage to flashing this kernel instead of the previous one? Boosted performance and/or battery life?
mbducati said:
What is the advantage to flashing this kernel instead of the previous one? Boosted performance and/or battery life?
Click to expand...
Click to collapse
Latest source
mbducati said:
What is the advantage to flashing this kernel instead of the previous one? Boosted performance and/or battery life?
Click to expand...
Click to collapse
Post above, yes and yes. You can always flash/restore back to stock if it's not for you. Just another choice.
it is running good.. I just see all the time a notification of a security warning.. (in my lanuage). unauthorized actions detected
Error404html said:
it is running good.. I just see all the time a notification of a security warning.. (in my lanuage). unauthorized actions detected
Click to expand...
Click to collapse
You probably need to delete, in system/app/SecurityLogAgent.apk. It only happens with bone stock ROM. In my roms, it's already removed.
hi,
is external sd card write also enabled?
IngoPan said:
hi,
is external sd card write also enabled?
Click to expand...
Click to collapse
That's through the ROM. platform.xml is the file that needs to be modified. It's in my roms as the "SD card fix".
Sent from my LGLS990 using XDA-Developers mobile app
andyroidking said:
T810 5.1.1 - Boots fine.... I'll get back in a couple days with performance.... I'm sure it's GREAT! Thanks again.
Click to expand...
Click to collapse
Running smooth. No issues at all! Might be getting a little better battery but I also run a lean android system.... Thanks again!
Thanks, i flashed the canadian stock rom and then your kernel. As there is no Xposed framework now (i had before) what
ROM do you recommend to flash (must be deodexed i suppose) ?
IngoPan said:
Thanks, i flashed the canadian stock rom and then your kernel. As there is no Xposed framework now (i had before) what
ROM do you recommend to flash (must be deodexed i suppose) ?
Click to expand...
Click to collapse
Check out this post. http://forum.xda-developers.com/showthread.php?p=66145174
710 or 810 shouldn't make a difference.
Edit. Gapps and permissive hack you shouldn't need though. They're built in. But maybe??
Sent from my LGLS990 using XDA-Developers mobile app
Looking forward to a Synapse enabled version with CPU & GPU UC & UV - then I'll flash it
hasenbein1966 said:
Looking forward to a Synapse enabled version with CPU & GPU UC & UV - then I'll flash it
Click to expand...
Click to collapse
It's in the works. It'll be coming out with everything. I'm having some issues but it should be done in the next couple days.
Sent from my LGLS990 using XDA-Developers mobile app
V1.1 is up!! See/read changelog!!!
810 users. I need to know if Synapse is working. It should. I just need confirmation.
Enjoy
Gimme a few.
Synapse is working fine on 810
Sent from my SM-T810 using XDA-Developers mobile app
andyroidking said:
Running smooth. No issues at all! Might be getting a little better battery but I also run a lean android system.... Thanks again!
Click to expand...
Click to collapse
works perfect.
Must I change original Neked Nook PB1 kernel with this one?