[MOD] Update PRL from Phone UPDATE 2 for KitKat - Sprint HTC One (M7)

Update 2: Attached is an EPST that will allow ##778# PRL changes on KitKat ROMS. It took me a while to figure this out. I had planned on posting this up, but wanted to keep it a Bad Boyz exclusive for a short while. Again the teams intention was always to share this with the community.
Update: I finally cracked EPST. If you have changed your sku to 42, you can set it back to 10 and flash the PRL_Update below. If you have not flashed this, and would like ##778# to work, you can flash the EPST_Only.zip
The EPST will not work on a ROM that already has the sku set to 42
The attached zip includes a modified Phone.apk and the EPST and Fieldtrial apks posted by schmeggy929. This MOD will allow you to change your PRL by dialing ##778# while maintaining the proper CDMA settings under settings> Mobile Data. You need to be rooted to do this.
Instructions:
1) Open a file manager and navigate to system/customize/ACC/default.xml. Open this with an editor and near the bottom change:
<item type="integer" name="sku_id">10</item>
To:
<item type="integer" name="sku_id">42</item>
2) Reboot into recovery and flash the attached zip
3) Wipe caches and reboot
Note: Depending on how the location icon was removed from your ROM, this MOD may cause it to reappear. For those on 5.5 ROMs. this will also get rid of the persistent 3G icon in the status bar.

Nm

Won't work for me. My problem described in this thread http://forum.xda-developers.com/showthread.php?t=2515459
I see error about wrong MMI code.

Works like a champ on my install of Bad Boyz 5.5 ROM. Thanks!

Illidane said:
Won't work for me. My problem described in this thread http://forum.xda-developers.com/showthread.php?t=2515459
I see error about wrong MMI code.
Click to expand...
Click to collapse
which ROM are you on?

Awesome! This works on the Sense 5.0/Android 4.3 as well!

Didn't work for me either, had to restore a nandroid because it killed my cell radio. Running Insert Coin R279.

uh60james said:
Didn't work for me either, had to restore a nandroid because it killed my cell radio. Running Insert Coin R279.
Click to expand...
Click to collapse
I thought PRL already worked on that ROM.
Try again, then go to setting>Mobile Data>Network Mode and make sure it is set to CDMA

chas123 said:
I thought PRL already worked on that ROM.
Try again, then go to setting>Mobile Data>Network Mode and make sure it is set to CDMA
Click to expand...
Click to collapse
It's supposed to work but for some reason it's not working for everyone. I'll try again in a bit.
Sent from my HTCONE using Tapatalk

chas123 said:
which ROM are you on?
Click to expand...
Click to collapse
Oh sorry. That worked! Forgot to set CDMA only...

Illidane said:
Oh sorry. That worked! Forgot to set CDMA only...
Click to expand...
Click to collapse
EcliticOne and Insertcoin both have the sku_set to 42, but they aren't using the Phone.apk that I modified. If you flash the zip on those ROMs you will have to manually set the network mode.
EDIT: Also- on EclipticOne, I don't know how this might jack up the inversion. If someone wants to post up their Phone.apk, I will modify it so that you guys will have the proper CDMA settings- i.e. the ability to switch LTE on and off- while maintaining the color scheme.

Bump

EPST_Only.zip........ confirming works with Viper RC2 rom
Thanks chas :good:
EPST worked fine for me with insertcoin but I have seens others saying it dont work for them for some strange reason so this mod may be useful for those guys too.

This did bring EPST functionality back on InsertCoin R289. However, it does not get rid of the persistent 3G icon and it does bring the location icon back. Any body have any idea how to fix those two problems?
Kyle

sweet...latest update working awesome! thx bro!

copekyle said:
This did bring EPST functionality back on InsertCoin R289. However, it does not get rid of the persistent 3G icon and it does bring the location icon back. Any body have any idea how to fix those two problems?
Kyle
Click to expand...
Click to collapse
That is going to have to be fixed by whoever cooked up your particular ROM. 5.5 is not ready for prime time where sprint is concerned. The persistent 3g icon and the location icon are there by HTC's doing.

chas123 said:
That is going to have to be fixed by whoever cooked up your particular ROM. 5.5 is not ready for prime time where sprint is concerned. The persistent 3g icon and the location icon are there by HTC's doing.
Click to expand...
Click to collapse
So, if we flash this will it give us a stock dialer? Just wondering what it would do to the themed tranquil dialer...
Thanks for working on this for the community, us sprint users know the need for roaming and 3g data!
Peace.
Sent from my Nexus 7 using XDA Premium 4 mobile app

mrshades812 said:
So, if we flash this will it give us a stock dialer? Just wondering what it would do to the themed tranquil dialer...
Thanks for working on this for the community, us sprint users know the need for roaming and 3g data!
Peace.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you have a themed Phone.apk, have your sku set to 10 (please check out the OP), and flash the EPST_Only.zip it will have no other effect than to give you the ##778# function.

I tried this on TranquilOne and the only way I got it to work was to make the edit(changing 10 to 42) and flash the PRL.zip. Only downside was it gave me a black on black EPST popup the one where you choose View or Edit. I tried the EPST zip and it wouldn't even bring up the menu.

chas123 said:
If you have a themed Phone.apk, have your sku set to 10 (please check out the OP), and flash the EPST_Only.zip it will have no other effect than to give you the ##778# function.
Click to expand...
Click to collapse
Guess I should have stated-
Won't work on odexed ROM's-
If you want this to work on an odexed ROM you are going do have to do a ch 755 mod

Related

expanded quick settings / cifs kernel?

Hey guys, so got my sensation xl rooted and running nicely on the stock stock ics, just want 2 things;
Are there any custom kernels for the xl with cifs built in? also how Do I get expanded quick settings? Is there just an apk I can instal?
Thanks
geekyhawkes said:
Hey guys, so got my sensation xl rooted and running nicely on the stock stock ics, just want 2 things;
Are there any custom kernels for the xl with cifs built in? also how Do I get expanded quick settings? Is there just an apk I can instal?
Thanks
Click to expand...
Click to collapse
For ICS we don't have any kernel development unfortunately. As for EQS, that is in SystemUI.apk and can be found in my build
benjamin.j.goodwin said:
For ICS we don't have any kernel development unfortunately. As for EQS, that is in SystemUI.apk and can be found in my build
Click to expand...
Click to collapse
Thanks, i have grabbed the systemui.apk but how do i install it? I have copied your systemui.apk to /system/apps and rebooted but dont have anything different in my EQS? What have i missed
geekyhawkes said:
Thanks, i have grabbed the systemui.apk but how do i install it? I have copied your systemui.apk to /system/apps and rebooted but dont have anything different in my EQS? What have i missed
Click to expand...
Click to collapse
Or i could be less fo a fool and just flash them in CWM as you point out in your thread!
EDIT: Think i must have done something wrong, my phone wont boot into sense now, i flashed the % battery mod and SystemUI for EQS and now i get systemui has crashed messages all the time, sense never fully starts and i get into anything! Disaster.....
Thoughts?
Which ROM did you grab it from?
Best way to install is by adb pushing it
Just reflash the stock ROM over the top. Should fix your issues.
Sent from a Paranoid Nexus
benjamin.j.goodwin said:
Which ROM did you grab it from?
Best way to install is by adb pushing it
Just reflash the stock ROM over the top. Should fix your issues.
Sent from a Paranoid Nexus
Click to expand...
Click to collapse
Thanks, I grabbed it from the sense 4 load, hence the problems I made for myself. I decided to blank my phone and just go to your sense 4 final beta anyway. Eventually after a full format I got it back working. Just need to flash the extra quick settings and recent apps riles now and sorted. Thanks for your help
geekyhawkes said:
Thanks, I grabbed it from the sense 4 load, hence the problems I made for myself. I decided to blank my phone and just go to your sense 4 final beta anyway. Eventually after a full format I got it back working. Just need to flash the extra quick settings and recent apps riles now and sorted. Thanks for your help
Click to expand...
Click to collapse
Glad you're all sorted. guessing you were on sense 3.6 before which is why it didn't work
Sent from a Paranoid Nexus
benjamin.j.goodwin said:
Glad you're all sorted. guessing you were on sense 3.6 before which is why it didn't work
Sent from a Paranoid Nexus
Click to expand...
Click to collapse
Yes think that was the issue. Thanks for your help, just out of interest, any chance of your final build having cifs supported in the kernel? Im just starting to teach myself how to compile kernels, hopefully il be able to contribute soon!
I personally don't touch kernels, but vertigo does. Not sure whether he will have time to do one.
I hope to soon start playing with them when I get some more time, but if you manage to make one then maybe I can bang it in

[ROM][UVLG3] (2012-09-02) Stock-Rooted-Deodexed-Zipaligned / Debloated

Thanks to Android Revolution for providing the nandroid backup of his T-Mobile Note, here's a complete stock, rooted, deodexed, zipaligned ROM. I'll look in to releasing a modified framework-res.apk later that adds SIP calling settings and modifies the auto-brightness levels. If no one else does it first, I'll probably look in to adding the extended power menu to make it easier to reboot in to recovery and maybe see if we can get the 15 toggles mod that works on many AT&T roms working too.
I didn't remove any apps, so if you know there are things you don't want, feel free to open the zip and delete things out of /system/app before flashing. Suggestions on what can/should be removed would be great too.
This does not include the modem so flash that separately if you want the latest T-Mobile modem. I'm working off of an AT&T Note so it's easier for me to keep the modems and ROMs separate. tomin.fhl already has that posted for you here: http://forum.xda-developers.com/showthread.php?t=1837907
Thank these folks for making this possible:
Android Revolution and all the folks releasing bits from the T-Mobile Note.
www.androidfilehost.com for providing free hosting
electron73 and flappjaxxx for releasing stock-ish AT&T ROMs that were very helpful to me to figure out how to put together the flashable zip
Download: http://beta.androidfilehost.com/?fid=9390034591667978483
Mods that work:
I tried a couple of the 15 toggle mods for AT&T Note UCLF6 ROMs and they seem to work as is. If you like the toggles go ahead and try them and be sure to thank the creators if it works.
electron73's: http://forum.xda-developers.com/showthread.php?t=1773408
bigfau's colored: http://forum.xda-developers.com/showthread.php?t=1766933
Edit (09/02): If you're looking for a stripped down version, I've customized the ROM more or less to my liking and have uploaded it for others to use. These are the changes I remember off hand:
Removed:
TouchWiz "stuff" (launcher, widgets, supporting APKs)
Samsung keyboard/TTS (keyboard wasn't working anyway and I don't use it so didn't spend too much time figuring out why)
Most of the wallpapers, including all of the live wallpapers
Some Google Apps (new Play Music/Video, a few others) as they inevitably end up out of date anyway and need to be updated from Play Store. The ones that I left in the system partition have been updated to latest available on Play Store.
Other T-Mobile add-ins (if you actually miss anything that was removed you can grab it from the full stock ROM)
Added to system:
Apex launcher
Hacker's Keyboard
Google Now (from this thread http://forum.xda-developers.com/showthread.php?t=1747224)
Edited framework.jar to include the 4-way reboot option to restart in to recovery (based on http://forum.xda-developers.com/showpost.php?p=24303020&postcount=13)
Edited framework-res.apk and added in the native SIP calling settings (based on http://forum.xda-developers.com/showthread.php?t=1109962). Also tweaked the screen brightness when on Auto to be a bit dimmer (based on http://forum.xda-developers.com/showthread.php?t=1541180).
Added as non-system APKs:
T-Mobile My Account (overlaps a lot with Access T-Mobile, I'd pick the one that works better for you and delete the other)
ES File Explorer
Titanium Backup
Solid Explorer
aLogcat
Chrome
I've been using this build for a couple of days and it has so far been problem free for me. If the camera closes on you after initially loading the ROM, a reboot seems to fix that without it cropping up again. Last thing on my to do list is to look at replacing the T-Mobile tether app (I don't tether too often so it hasn't been a priority). In the future I'm considering replacing the S-Note and S-Memo apps with some of the community/other developer note (Memo/Papyrus/etc) taking apps, mostly in preparation for a jump back to Cyanogenmod ROMs once they gain a bit more stability.
Download (T879UVLG3-20120831.zip): http://beta.androidfilehost.com/?fid=9390077933525139510
Can i flash this on my rooted att note with sim unlocked?
I never knew that we could remove or add system apps inside the zip and have it flash without any problems. So I could add the cerberus security app? and remove t-mo bloat? then flash via cwm?
I know this is a basic question. Would love a "dummies" answer if possible.:silly:
I can't wait to get my T-Mo note for some HSPA+ lovin'.
Thanks a bunch for this (thanks button hit).
Excellent, more flashing!!!
I think in the next month or so, we all will be doing a lot of flashing!
easy did u try this one on the att note ?
daminux said:
easy did u try this one on the att note ?
Click to expand...
Click to collapse
Uploading it to my phone right now through Kies Air, will try it out after. I think I might reset data and start new, see if that will make things faster and less problematic.
daminux said:
easy did u try this one on the att note ?
Click to expand...
Click to collapse
It works fine on the AT&T Note, that's what I used to test with. Just make sure to use a modem that is modified for i717 since using both the mdoem.bin and amss.bin straight from a T-Mobile Note causes it to run about 10 times slower than normal. I know tomin.fhl, jeet92 and others have different combos that work and I may do a little testing too next week when I get some time. Doesn't look like we can expect any breakthroughs in speed though unfortunately.
sashusmom said:
I never knew that we could remove or add system apps inside the zip and have it flash without any problems. So I could add the cerberus security app? and remove t-mo bloat? then flash via cwm?
I know this is a basic question. Would love a "dummies" answer if possible.:silly:
Click to expand...
Click to collapse
Yep, you sure can. I usually make a few changes when I download the zips for other ROMs, like modifying the framework-res.apk first to allow for native SIP calling, then saving it back in to the zip. Other interesting things to do is to add in the Google Now files that were modified to work with ICS so that you don't need to copy them in after a flash.
karryt said:
Yep, you sure can. I usually make a few changes when I download the zips for other ROMs, like modifying the framework-res.apk first to allow for native SIP calling, then saving it back in to the zip. Other interesting things to do is to add in the Google Now files that were modified to work with ICS so that you don't need to copy them in after a flash.
Click to expand...
Click to collapse
Kerry, do you know how to change the port on T-Mobile wifi calling? My company blocks this port that tmo wifi uses and it gets an error every time at work. At home it is fine.
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
daminux said:
easy did u try this one on the att note ?
Click to expand...
Click to collapse
It is working fine, I'll test the radio out when I'm out door, my reception suck at work. These brick buildings are the fault.
easyguy said:
Kerry, do you know how to change the port on T-Mobile wifi calling? My company blocks this port that tmo wifi uses and it gets an error every time at work. At home it is fine.
Click to expand...
Click to collapse
I'm not too sure about that, but my initial guess would be that it's not possible. Some quick Google'ing came up with UDP ports 500 and 4500 that are used, but that would be set on T-Mobile's servers so having your client try to connect on a different port would result in no connection. Have you asked your IT department if they could work with you to find out what rules could be added to the firewall to allow Wifi calling? I know some companies will install repeaters to help get reception for their employees if they're in a bad area, and this would be an effectively zero cost to them solution.
karryt said:
I'm not too sure about that, but my initial guess would be that it's not possible. Some quick Google'ing came up with UDP ports 500 and 4500 that are used, but that would be set on T-Mobile's servers so having your client try to connect on a different port would result in no connection. Have you asked your IT department if they could work with you to find out what rules could be added to the firewall to allow Wifi calling? I know some companies will install repeaters to help get reception for their employees if they're in a bad area, and this would be an effectively zero cost to them solution.
Click to expand...
Click to collapse
It's a hassle, they have so many steps to request something like this.
Samsung keyboard
Hey karryt,
Had a small force close issue with the Samsung Keyboard on your rom. I reverted to my pre-rooted image and it went away. Let me know if you need anything to help smooth out the rom because having a flashable zip would help me out as well.
Thanks for putting together this ROM. I am testing on my ATT i717 using Blaze modem. I will give it a test run over the weekend.
tomin.fhl said:
Hey karryt,
Had a small force close issue with the Samsung Keyboard on your rom. I reverted to my pre-rooted image and it went away. Let me know if you need anything to help smooth out the rom because having a flashable zip would help me out as well.
Click to expand...
Click to collapse
Im not getting force close wth this rom, i did a complete wipe before loading this rom.
easyguy said:
Im not getting force close wth this rom, i did a complete wipe before loading this rom.
Click to expand...
Click to collapse
Ok. My bad then.
Sent from my SGH-T879 using xda premium
Just flashed this on my at&t note will give you an update after a few days of using this ROM
Sent from my SGH-T879 using xda app-developers app
English UK Locale?
Which language/region locales are included? Might English UK be in this or is it the same as the standard T-Mobile stock? Also, will a T-Mobile Note still work fully on their network with this ROM? I got confused by this radio talk.
tomin.fhl said:
Hey karryt,
Had a small force close issue with the Samsung Keyboard on your rom. I reverted to my pre-rooted image and it went away. Let me know if you need anything to help smooth out the rom because having a flashable zip would help me out as well.
Click to expand...
Click to collapse
I'll take a look at this but might not get to it until next week. I did get those FCs sometimes also, but it was better when I factory reset even when flashing over the same stock image. For now using a different keyboard seems to work fine as a workaround.
adam917 said:
Which language/region locales are included? Might English UK be in this or is it the same as the standard T-Mobile stock? Also, will a T-Mobile Note still work fully on their network with this ROM? I got confused by this radio talk.
Click to expand...
Click to collapse
This is the same thing as stock, just modified a little to allow theme-ing and flashable via CWM. Looks like it does not have the UK language listed. You can use this ROM on both the AT&T and T-Mobile Notes and it should work just fine. You're not really gaining much if you're already on T-Mobile stock ROM though unless you want to flash mods on top of it.
is google wallet working on tmobile rom?

[MOD][XPOSED] Disable Sprint SystemUI Flag

this is a simple xposed module to disable the sprint systemui flag.
this gets rid of the persistent gps icon and gives you evdo/lte signal icons instead of the sprint 3g/4g ones.
xposed repo: http://repo.xposed.info/module/net.thinkindifferent.disablesprintsystemuiflag
source code: https://github.com/hotaru2k3/xposed-disablesprintsystemuiflag
Thanks for sharing
bump for new version.
hotaru2k3 said:
bump for new version.
Click to expand...
Click to collapse
Thanks
Thanks. Works great on stock with goodies.
Sent from my HTCONE using Tapatalk 4
hotaru2k3 said:
this is a simple xposed module to disable the sprint systemui flag.
this gets rid of the persistent gps icon and gives you evdo/lte signal icons instead of the sprint 3g/4g ones.
i've just replaced the apk with a new version that works on 4.3 as well as 4.1.2.
Click to expand...
Click to collapse
can you add the signal bars to the module, instead of the 6 bar sprint signal make it 5 bars like the generic M7? that would be awesome
mikevillarroel said:
can you add the signal bars to the module, instead of the 6 bar sprint signal make it 5 bars like the generic M7? that would be awesome
Click to expand...
Click to collapse
You can do that very simply yourself. Download a good file exploit app, make sure you give it root permissions and mount system as rw. Navigate to system/customize/acc and open default.xml. Now find this line
<item type="integer" name="signal_icon_level_cdma">6</item>
And simply change the integer to 5. Dave the xml, reboot and enjoy. If you search through that default.xml you may find allot of things that you want to change. Have fun....:thumbup:
Team Nocturnal.....no rulz
gruesomewolf said:
You can do that very simply yourself. Download a good file exploit app, make sure you give it root permissions and mount system as rw. Navigate to system/customize/acc and open default.xml. Now find this line
<item type="integer" name="signal_icon_level_cdma">6</item>
And simply change the integer to 5. Dave the xml, reboot and enjoy. If you search through that default.xml you may find allot of things that you want to change. Have fun....:thumbup:
Team Nocturnal.....no rulz
Click to expand...
Click to collapse
sounds easy enough, let me try it.I'll report back.
edit: nah to easy to be real, i did the change but still see the six bars
hey @hotaru2k3 what about a variation of your module that only removes the gps icon but leave the default signal icons? can you do that one?
mikevillarroel said:
hey @hotaru2k3 what about a variation of your module that only removes the gps icon but leave the default signal icons? can you do that one?
Click to expand...
Click to collapse
I can, but I'm not sure it would be worth the effort. why would you want that? the default signal icons are useless (showing "3G" for both 1x and ev-do), and afaik every custom rom removes the gps icon anyway.
I'm not saying I won't do it, I'm just saying someone would have to convince me that it's worth putting more effort into doing it than it would take for someone to flash a custom rom.
hotaru2k3 said:
I can, but I'm not sure it would be worth the effort. why would you want that? the default signal icons are useless (showing "3G" for both 1x and ev-do), and afaik every custom rom removes the gps icon anyway.
I'm not saying I won't do it, I'm just saying someone would have to convince me that it's worth putting more effort into doing it than it would take for someone to flash a custom rom.
Click to expand...
Click to collapse
No every custom rom removes the gps icon, at least no the Sprint port of ViperOne, that's why i'm using your module, because removing the icon myself for some reason breaks the wifi, and regarding the signal icons, well it's just that sprint icons right or wrong are the only ones i know for the past 8 or 9 years so....
I couldn't get this to work. Copied it over and installed via ES Explorer, but nothing happened. It said it installed successfully but after restart the stock icons are still there (GPS and data)
mikevillarroel said:
No every custom rom removes the gps icon, at least no the Sprint port of ViperOne, that's why i'm using your module, because removing the icon myself for some reason breaks the wifi, and regarding the signal icons, well it's just that sprint icons right or wrong are the only ones i know for the past 8 or 9 years so....
Click to expand...
Click to collapse
ok, I'll look into making a module to do that when I have time.
jac1599 said:
I couldn't get this to work. Copied it over and installed via ES Explorer, but nothing happened. It said it installed successfully but after restart the stock icons are still there (GPS and data)
Click to expand...
Click to collapse
did you enable it in the xposed installer app?
hotaru2k3;48186595did you enable it in the xposed installer app?[/QUOTE said:
Yes, had no luck.
Click to expand...
Click to collapse
please update to kitkat 4.2.2
hotaru2k3 said:
this is a simple xposed module to disable the sprint systemui flag.
this gets rid of the persistent gps icon and gives you evdo/lte signal icons instead of the sprint 3g/4g ones.
i've just replaced the apk with a new version that works on 4.3 as well as 4.1.2.
Click to expand...
Click to collapse
This is not working on kit Kat 4.2.2 pls update
Thanks...
ravichandrabr said:
This is not working on kit Kat 4.2.2 pls update
Thanks...
Click to expand...
Click to collapse
+1
The OCD in me wants that gps icon outta here.
jac1599 said:
Yes, had no luck.
Click to expand...
Click to collapse
I noticed that in the xposed module statusbar mods you have to do a soft boot for it to take. A hard boot doesn't work for some reason I'm unsure why.
Sent from my HTCONE using Tapatalk
How exactly do you install this. Didn't work for me just installing the apk nor moving it to system /app and installing it.
Sent from my HTCONE using XDA Premium 4 mobile app
fifedogg said:
How exactly do you install this. Didn't work for me just installing the apk nor moving it to system /app and installing it.
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to install Xposed Installer first and then run it through that. Just google Xposed and you should be able to find an apk. Extremely useful app. Sense 5 toolbox is another great app to run through xposed.
olorolo said:
I noticed that in the xposed module statusbar mods you have to do a soft boot for it to take. A hard boot doesn't work for some reason I'm unsure why.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Can you confirm it's working on 4.4.2?

jb/kk flash roms from another g2 variant on the vs980

Hello fellow vs980 owners. anyone wanting to flash a stock based/flex/gpro2 or aosp kk based rom from the other variants can now do so by flashing a patch in the same recovery session b4 1st boot,
instructions: download rom (id maybe stay away from d800 just in case cuz of the 3rd mic tht all othe g2's lack?)
wipe everything! data,cache,dalvik and system 3x
flash rom
If kk based stock/flex/gp2 rom flash the patch labeled 24a rotation fix, if aosp kk based flash the aosp kk patch. (If u have backwards rotation go back and flash the 24a rotation fix then REFLASH the aosp kk patch! (It wont boot otherwise)
If u get a error about it being the wrong device on aosp you'll have to unzip the rom then go into the build prop and updater script and change it to vs980 from whatever it was originally. Also if u have network issues u can try to go into the build prop and change any instance of "lte on cdma device=0" to =1 and default network=9 to 11. Another thing that may work if there is no option for cdma in network settings is to dial *#*#4636#*#* then go to phone settings n change it to lte,evdo,cdma there.
Note: I would stay away from any kk rom that says "recovery included" or anything similar as you definitely don't want it flashing the wrong recovery to your phone so ask in the roms thread for someone to clarify what exactly the zip flashes,
Note #2: this should be considered a beta so you flash at your own risk. But im 99% sure that the worst case scenario is that it wont boot n you have to manually boot back into recovery n flash a different rom cuz these patches dont touch anything that would mess u up too bad, also it works on my phone and I've got confirmation from a few others that it works for them as well
note #3: these patches include a vs980 kernel for stock or aosp depending on the patch, however you should be able to flash any custom kernel of your choice after the patches
Note #4: the aosp patch is from dr87's mahdi rom which i believe is caf based, idk what mokee or sokp uses but if its not caf based try unzipping the aosp patch and replace the boot.img in it with one from slim or cm or just ask in the roms thread which kernels are known to work for that rom then flash that after the patch,
download link: https://drive.google.com/folder/d/0B0lbyXDReetfSVh5MFA2M3RyMGs/edit
credits: dr87, tangjun269, dorimanx,bigfau, cloudyfa
if i helped press thanx
Awesome. This looks amazing. Quick question if we were to follow this and install a different ROM, would we have to follow these steps to flash an update of that ROM?
Sent from my Nexus 7
oadam11 said:
Awesome. This looks amazing. Quick question if we were to follow this and install a different ROM, would we have to follow these steps to flash an update of that ROM?
Sent from my Nexus 7[/QUOTE
while it completely depends on what's in the update and what it changes, id say it's easier and safer to just say yes, any updates should be followed by a reflash of the 2 zips
Click to expand...
Click to collapse
Yeah, I'm pretty positive dirty flashing without the patch would bootloop. Better off dirty flashing with patch and such, or to really be careful just clean flash every time. Flashing every nightly to me is silly
Sent from my vs980
Lawlrus said:
Yeah, I'm pretty positive dirty flashing without the patch would bootloop. Better off dirty flashing with patch and such, or to really be careful just clean flash every time. Flashing every nightly to me is silly
Sent from my vs980
Click to expand...
Click to collapse
yea, and the guys that make stock based roms usually dont push out updates quite as often as aosp guys so i would just back up and clean flash if at all possible
I really want to try some aeon flex, i hope using its normal installation combined with this will work out.
edit, couldnt get data with aeon
NyPlaya513 said:
I really want to try some aeon flex, i hope using its normal installation combined with this will work out.
edit, couldnt get data with aeon
Click to expand...
Click to collapse
In the build prop for aeon flex you have to find the line something like LTEconnectivityonCDMA=0 and change the 0 to a 1
Sent from my LG-VS980 using XDA Premium 4 mobile app
xlxfoxxlx said:
In the build prop for aeon flex you have to find the line something like LTEconnectivityonCDMA=0 and change the 0 to a 1
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
really? the script in the 1st zip is supposed to inject all the necessary apn's bulid prop edits and other stuff for lte on cdma to work outta the box. both cloudyflex and rayglobe flex that i tested this on worked fine, well i did have to toggle airplane mode after switching to lte/cdma from global mode in settings on rayglobe but after that everything was fine. did you guys try changing from global to lte/cdma in settings before having to do the build prop edit?
Lawlrus said:
Yeah, I'm pretty positive dirty flashing without the patch would bootloop. Better off dirty flashing with patch and such, or to really be careful just clean flash every time. Flashing every nightly to me is silly
Sent from my vs980
Click to expand...
Click to collapse
The crack flasher is not strong enough with this one. We must select a new candidate for Flashlord of the XDA.
PWn3R said:
The crack flasher is not strong enough with this one. We must select a new candidate for Flashlord of the XDA.
Click to expand...
Click to collapse
Do not doubt me! I am merely taking a short hiatus!
Sent from my VS980 4G using xda app-developers app
will this stop my G2 from dropping to 3g, 1x, or losing data completely? for instance... at my house my G2 will show no data or 3g and if I toggle air plane mode it connects to 4G right away... these zips will solve that?
kaluna00 said:
will this stop my G2 from dropping to 3g, 1x, or losing data completely? for instance... at my house my G2 will show no data or 3g and if I toggle air plane mode it connects to 4G right away... these zips will solve that?
Click to expand...
Click to collapse
This is not a data fix if you're having data issues. It is made to flash international Roms on a vs980
Sent from my VS980 4G using xda app-developers app
kaluna00 said:
will this stop my G2 from dropping to 3g, 1x, or losing data completely? for instance... at my house my G2 will show no data or 3g and if I toggle air plane mode it connects to 4G right away... these zips will solve that?
Click to expand...
Click to collapse
what the post above mind said. the thing about roaming in the title is in reference to the fact that the initial ports of some of the flex roms you had to either do a bunch of steps involving flashing a 12b rom then dirty flashing flex then clear data from a laundry list of apps or you could clean flash but have to put up w constantly having the roaming symbol in the status bar. but then again the op was fairly clear about what this does so if you're curious give it a read
Thanks for the fun down.. I'll check it out
I used this and flashed Pardus from d802 forum. Seems to work great so far. Had to install 8sms to get MMS but other than that seems good. Thanks!
Sent from my unknown using Tapatalk
tombepa said:
I used this and flashed Pardus from d802 forum. Seems to work great so far. Had to install 8sms to get MMS but other than that seems good. Thanks!
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
Oh yea my bad I forgot to put that in the op. All the flex ROMs don't work w MMS cuz the v/ls980 uses a different MMS apk. Its like lgusmms.apk or something and the other variants use just lgmms.apk. u could try replacing the MMS apk from any flex ROM w the one from a 12b based ROM n reboot n see if that fixes it. Also if just pushing the apk doesn't work try pushing APN.conf to system/ect I think it is n see if that does it. I'll try it myself to see if that works
blazewit said:
Oh yea my bad I forgot to put that in the op. All the flex ROMs don't work w MMS cuz the v/ls980 uses a different MMS apk. Its like lgusmms.apk or something and the other variants use just lgmms.apk. u could try replacing the MMS apk from any flex ROM w the one from a 12b based ROM n reboot n see if that fixes it. Also if just pushing the apk doesn't work try pushing APN.conf to system/ect I think it is n see if that does it. I'll try it myself to see if that works
Click to expand...
Click to collapse
what about if someone were to pull the mms apk from the sprint version of the g flex. As it is cdma based, would that possibly fix the problem?
we just need it from the LS995
I've tried this twice with 2 different downloads and get an error on the rotation patch.
......error executing updater binary in zip.
After a reboot i see the LG then black.
Anybody else having issues?
s_wall98 said:
I've tried this twice with 2 different downloads and get an error on the rotation patch.
......error executing updater binary in zip.
After a reboot i see the LG then black.
Anybody else having issues?
Click to expand...
Click to collapse
which roms, and which recoveries and the version of it
Aeonflex and Pardus.
I'm using twrp 2.6.3.3

Inverted InCall Dialer

I am posting here for people who don't check my rom thread. The inverted dialer is only the "InCall Dialer" because it seam "Theme store" themes don't theme the InCall Dialer.
NOTE: This mod will most likely only work with a rom that has "Signature verification disabled" Check with your rom developer for more info. It will of course work with my Rom and again I can't promise it will work with other, just ask in the ROM thread you are using.
The screen shot shows my "Theme store" "Main" dialer ("Space odyssey") and then my Inverted dialer next.
Just flash in recovery and enjoy
I would also recommend checking my ROM thread for the most current theme options and mods
XDA:DevDB Information
Inverted InCall Dialer, ROM for the T-Mobile Samsung Galaxy S6
Contributors
stangdriver44
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2015-06-06
Last Updated 2015-06-06
DOWNLOADS
DOWNLOADS​
Inverted InCall Dialer
Inverted Red InCall Dialer
Will this by chance work with the Sprint S6?!
JoeFCaputo113 said:
Will this by chance work with the Sprint S6?!
Click to expand...
Click to collapse
It is possible? It seems like our main dialer will not work for sure, but I belive the InCall dialer is compatible.
If you want to try I would suggest navigating to system/app/InCallUI and see if it present, then copy it to your sdcard and flash the dialer of your choice. I've seen you from the S5 forums and it seems like you know what your doing so I won't go into detail about finding the app in your system. Good luck and report back the good or hopefully not the bad. If it does fail just push the backup you made of your stock apk and set permissions, then reboot.
stangdriver44 said:
It is possible? It seems like our main dialer will not work for sure, but I belive the InCall dialer is compatible.
If you want to try I would suggest navigating to system/app/InCallUI and see if it present, then copy it to your sdcard and flash the dialer of your choice. I've seen you from the S5 forums and it seems like you know what your doing so I won't go into detail about finding the app in your system. Good luck and report back the good or hopefully not the bad. If it does fail just push the backup you made of your stock apk and set permissions, then reboot.
Click to expand...
Click to collapse
Will do once I get home later tonite!
stangdriver44 said:
It is possible? It seems like our main dialer will not work for sure, but I belive the InCall dialer is compatible.
If you want to try I would suggest navigating to system/app/InCallUI and see if it present, then copy it to your sdcard and flash the dialer of your choice. I've seen you from the S5 forums and it seems like you know what your doing so I won't go into detail about finding the app in your system. Good luck and report back the good or hopefully not the bad. If it does fail just push the backup you made of your stock apk and set permissions, then reboot.
Click to expand...
Click to collapse
So it didn't work lol. When I did it, and then called someone the InCallUI actually never even appeared and the phone would not let me go into it lol.
JoeFCaputo113 said:
So it didn't work lol. When I did it, and then called someone the InCallUI actually never even appeared and the phone would not let me go into it lol.
Click to expand...
Click to collapse
Sorry about that.
I did just notice in your Signature that you're running a 100% stock rom.
That's probably the issue. The apk I modded is deodexed amd the system would probably need to have "Signature verification disabled". As soon as you get to a custom rom let me k keeping and we can see about getting it working for you. Thanks for the feedback amd being brave and trying it.
Was it easy to restore? Did you make the backup of the apk amd then just put it back after?
stangdriver44 said:
Sorry about that.
I did just notice in your Signature that you're running a 100% stock rom.
That's probably the issue. The apk I modded is deodexed amd the system would probably need to have "Signature verification disabled". As soon as you get to a custom rom let me k keeping and we can see about getting it working for you. Thanks for the feedback amd being brave and trying it.
Was it easy to restore? Did you make the backup of the apk amd then just put it back after?
Click to expand...
Click to collapse
Well it's the stock ROM odexed.... but I'm obviously rooted haha. But yes very easy to restore.. I just renamed the stock apk "InCallUI.apk.bak" so it was very easy to go back to the original one.
This theme is Dope! My phone is G925f and am still suffering with the stock call ui any chance to get it work with thank bro
DamBadz said:
This theme is Dope! My phone is G925f and am still suffering with the stock call ui any chance to get it work with thank bro
Click to expand...
Click to collapse
Sorry for the delay getting back to you.
I do have users with the 925f variant running my rom and obviously the themed incall work with that.
If you are not running my OZOP rom I can only recommend making a backup like I posted to the above user, The themed apk is from a my "deodexed" rom with "signature verification disabled" Then flash and see if it works?
The worst case scenario when you make a call the incall portion won't popup and you will have to reboot the end the call and restore the backup apk.
For some reason on 5.1.1 didn't work ppl couldn't hear me on incoming and out going? ??
Sent from my SM-G920T using Tapatalk

Categories

Resources