Related
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
zeema said:
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you also formatting /system before flashing?
Yes I also tried this
Sent from my GT-P7300 using xda premium
zeema said:
Yes I also tried this
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
nirogu325 said:
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
Click to expand...
Click to collapse
Yes I did
Sent from my GT-P7300 using xda premium
zeema said:
Yes I did
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you using CWM Recovery v.6.0.0.0?
Actually I tried many versions starting with 5.1.0 and 5.5.0.4 and 6.0.0 I'dont where is the problem
Sent from my GT-P7300 using xda premium
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
mmostafanyw said:
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
Click to expand...
Click to collapse
Off-topic, but AOKP Milestone 6 will be the last ICS-based AOKP as evidenced here.
Again I successfully flashed the AOSP JB by safariking but it has some errors so I m back again to overcome 2.3.1
Sent from my GT-P7300 using xda premium
Still the same with every new cm10 releases
Kalte_kaffe should have look on this
Sent from my GT-P7300 using xda premium
Hi everyone i've been using TheWisp's ROMS on my mini for quite some time now and i'm a big fan of his hard work:highfive::good: especially both cm9 and AOKP roms...So my problem is: i tried to update The Wisp's AOKP ICS Milestone 6-r2 zip with the latest base of his cm9 stable everything went fine until i flashed on my device for some reason that is still unknown my device got stuck while booting any help please get it to boot with success?:crying:
didn't you tried wiping data before and after flash
dheeraj (dhlalit11) said:
didn't you tried wiping data before and after flash
Click to expand...
Click to collapse
I wiped data before and after flash...so i don't know what seems to be the problem here
I think it might have something to do with how i updated the zip file
Take libandroidruntime and libandroid and libandroid_server from aokp
Sent from my GT-S5660 using xda app-developers app
Frankin96 said:
Take libandroidruntime and libandroid and libandroid_server from aokp
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Ok so i've done what you said it's now booting with success but it's still cm9 instead of aokp i wanted to update aokp rom with the lastest cm9 source by TheWisp but it didn't worked:crying:
I don't know what i'm actually doing wrong here
Hey, im a noob so heres my problem, ive experimented alot on my p1000 and one thing that bothers me alot was the video playback which was either choppy or laggy on CM so ive always restocked it back to GB. I think the solution for this is to use another kernel other than CwM. IS there any other kernels that i could try, the ones that could result in very good hd playback once im on a custom rom?
Sent from my GT-P1000 using xda app-developers app
First kernel and CWM are two different things CWM is one of the recovery mode.
For HD videos... You can use CM 10 or 9 or give AOKP SGT7 a try.... They are much stable...
Sent from Android
Ok so kernel and cwm are different i get it, but could you tell me how to install the heimdall kernel on p1000 step by step? Ive read from somewhere that it could improve hd video playback. And ive already used cm 9 stable and there is no cm 10 stable yet before but the problem persisted. . .
Sent from my GT-P1000 using xda app-developers app
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes you're right, I kinda read wrong, the article said about the humberos, now that is a kernel right? I've installed it, and I realized that its a modified version of CwM but the real question is that do I have to keep using the firmware from humberos or could I use other custom roms like SGT7 aokp or Cyanogenmod?
It should be fine using it with other ROMs as long as both are from the same android version
Sent from my Galaxy Nexus using Tapatalk 2
Humberos is the guy's nickname. His ROM and kernel may also be referred to as Humberos.
But he made kernels back from Gingerbread days.
So we better know which one you flash.
You can use his kernel, for example his JB kernel in, in cm10 and aokp jellybean.
you can use his ICS kernel in AOKP ICS, CM9, and so on.
For CM10.1 it is yet a different kernel.
And it is not just different cwm, the kernel itself is different.
Sent from my GT-P1000 using xda app-developers app
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
bisharat said:
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
That's because you installed 4.1.2 ROM with 4.2.1 kernel... It is better for you I'd you restock then update again... And please please please install the ROM with it's kernel because both of them are good AOKP or CM
Sent from my Galaxy Nexus using Tapatalk 2
Actually from the description, installing aokp sgt7 jb after running cm10.1 should not be an issue as long as you do the 3 wipes (cache, data, dalvik-cache).
aokp sgt7 will replace the cm10.1. But nevertheless, if it is still looping, do the restock.
They are all using CWM 6.x nowadays, it doesn't really matter, but the kernel has to be for the right ROM.
BTW, too many people think cm10.1 is just a little update from cm10.
It is not. It is a completely new framework. Treat it as a different ROM.
So all I gotta do is restock back to GB, root GB, install the humberos cm 10 kernel from SD after wiping everything, and then install aokp Sgt 7 or cm 10 right?
Sent from my GT-P1000 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok the instructions are well understandable but alotta files to download and a hell of lotta instruction manual to read. Its gonna take me a day to absorb all that and then start the "surgery" of my patient the p1000. Thanx again for the post though, will let u now through this post if any more queries. . .
Sent from my GT-P1000 using xda app-developers app
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok well ive flashed the overcome kernel and then I flashed the overcome 4.1 aka the overcome experience and its actually quite fantastic. On my way to flash JB from CM. btw do I have to register the divx licenses? as well as other licenses?
ok im using overcome 4.1.0 and its fabulous. but before I go towards JB, can someone pls explain how to wipe the 3 caches using the overcome kernel, since its quite new to me? also when flashing to cm jb, do I have to clear the caches and then install from internal sd card? Is that how I upgrade it, not clean install it?
ok so I flashed aokp and the big problem is that it installs cwm over the overcome kernel and so the video problem still persists. Isnt there a way to remove the cwm recovery from the aokp rom?
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
priyana said:
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I didn't read it, I just thought about it. Anyhow, I flashed aokp a few times just like you said, and flashed gapps (obviously), but result is still the same. I'll post a video ASAP on the video playback performance that I'm still complaining about...
Video is a kernel/codec related problem.
It is not logical to link it to gapps or cwm.
Sent from my GT-P1000 using xda app-developers app
Ok so its a kernel/codec problem, what to do about it?
Sent from my GT-P1000 using xda app-developers app
Hey guys,I was checking the stable cm updates for my gti9000 and I found a new cm snapshot...what is it?..if its worth updating then how can I update it..m currently on cm 10.1.3 RC2...?thanks ))
Sent from my GT-I9000 using xda app-developers app
hotboyburnz said:
Hey guys,I was checking the stable cm updates for my gti9000 and I found a new cm snapshot...what is it?..if its worth updating then how can I update it..m currently on cm 10.1.3 RC2...?thanks ))
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Just download the snapshot ROM and gapps .
And flash it the same way you flashed cm10.1.3 RC3
have a nice day
The next Version of CM 10.1.3. is the pure stable version ,right?
I don`t see any RC3 in the download portal of CM...last RC is the second one ...
So i think this is the stable-version which you have ,right?
Flashing the same way you always flash a version ...
With CM10.2 you should have about 40% longer battery life and faster phone.
Latest nightlies work perfectly fine for me. Download rom zip, gapps for 4.3x/cm10.2, run your i9000 in recovery mode, wipe all (factory reset/data, cache, dalvik cache) flash rom zip twice (first time it will just warn you that system repartitions are different), then flash gapps while still in recovery, reboot, wait until the system and all apps get upgraded, log on your google account and enjoy.
If your apps now are synced with your google account, you'll have all of them automatically downloaded short after running the CM10.2
Have you flashed to CM 10.2 ??? And what is your opinion about it ...:good:
hotboyburnz said:
Hey guys,I was checking the stable cm updates for my gti9000 and I found a new cm snapshot...what is it?..if its worth updating then how can I update it..m currently on cm 10.1.3 RC2...?thanks ))
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
freakymod2120 said:
Have you flashed to CM 10.2 ??? And what is your opinion about it ...:good:
Click to expand...
Click to collapse
No ROM can be compared to CyanogenMod..they r the best....10.2 is also pretty great...performance is slight better from earlier ROM but battery is frickin awesome ..
20-30% increase in battery!!
Sent from my GT-I9505 using xda app-developers app
Nice to hear ...:good:
But the battery drain is a prob ...i don`t have this issue ,what nightly do you use???
Whats about the battery consumption in the battery-consumer-menu? Any apps eating so much battery like google now or something???
For me it is working great ...
hotboyburnz said:
No ROM can be compared to CyanogenMod..they r the best....10.2 is also pretty great...performance is slight better from earlier ROM but battery is frickin awesome ..
20-30% increase in battery!!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Noob here so:
I just flashed vanir Rom and i was looking for a kernel so i tried iodak and warewolf but it bouth said after i flashed them "lot's of menu stop and other things stop" Hope someone understand what i say. I searched and i coudn't find something that could helped me. I have to say i searhed for about 4 hours before i asked. P.S. Made the account after i searched so i could put the question.:crying:
So my quiestion is: What kernel i have to use, what version? I tried warewolf CM 10.1 and stock too and v8 from iodak
At first we need to know which Vanir you're on, 4.4.2 or 4.3?
And you should ALWAYS wipe cache and dalvik cache in recovery prior to kernel, otherwise you may run into problems.
The kernels you use should be any kernel versions and thus be compatible with most Roms.
Try iodak 9.5 and it should work.
Sent from my LG-P880 using XDA Premium 4 mobile app
kernel
Omario-242 said:
At first we need to know which Vanir you're on, 4.4.2 or 4.3?
And you should ALWAYS wipe cache and dalvik cache in recovery prior to kernel, otherwise you may run into problems.
The kernels you use should be any kernel versions and thus be compatible with most Roms.
Try iodak 9.5 and it should work.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have 4.3 btw you suggest to go for 4.4.2?
I wiped every time sir.
When i make a backup with rom manager it will save the rom and the kernel?
A backup will save the whole thing boot image, system, data etc
Vanir 4.4.2 has definitely a even better performance and with iodak's anykernel 9.5 it's awesome. Give it a try I'd say but you should wipe /system within CWM.
Sent from my LG-P880 using XDA Premium 4 mobile app