i'm new samsung user...Gnote is my first samsung device ... so now how can i install rom without rom manager...i try to search workout and i can't find it...i try to install using update in normal reboot and it failed...
Goto sammobile.com and download desired firmware file..after download odin 1.85 and press volume down+home+power button on ur sgn and connect phone to pc after powering up odin..when yellow box appears in odin click pda and choose the downloaded firmware and flash..wait for green box to appear on odin and sgn will reboot..voila..
Sent from my GT-I9100 using Tapatalk
Personally, I wouldn't use Odin if I were you unless absolutely necessary.
I rooted using the instructions here, and the supplied kernel adds CWMManager, which is very similar to ROM Manager.
Since then, I've also used Mobile Odin (available from the Market).
Regards,
Dave
Firmware upgrade encountered an issue. Please select recovery mode in kies & try agai
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
PSYCHOBOY18 said:
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
Click to expand...
Click to collapse
what have you tried to do to fix this already?
ICS Bad Idea!!!
I wouldnt recommned updating to ICS especially through kies i had my phone stuck at "firmware upgrade encountered an issue please select recovery mode in kies and try again" for 2 days It was a disaster. So i came across a website called http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
I then downloaded the the I927UCLH2 ICS 4.0.4 Original Stock ROM using ODIN... FOLLOW DIRECTIONS THROUGH THE SITE NOT KIES!! BUT THE ORIGINAL STOCK ROM!
***After you have successfully completed the stock rom with ODIN***
Get a rom from http://forum.jakar.co/android-hack/1345758298/ Choose the ROM called Bio360 its almost the same Replica of Gingerbread its Version 2.3.5
VERY IMPORTANT!! Make sure you put the ZIP FILE (ROM) in your INTERNAL STORAGE NOT THE EXTERNAL!!! (SD CARD SLOT) BIG MISTAKE!!
Go to google and type in "CWM captivate glide new" click the first link beggining with www.theandroidsoul.com........ FOLLOW DIRECTIONS THROUGH THE SITE!
After you have downloaded the Rom (ZIP FILE) and CWM put your phone into Recovery mode by powering off the device. hold power button and the volume down button until you see clockwork recovery, from here you are going to look for install from sd card and look for the zip file/Rom Bio360 and you should be set!
*******THE Bio360 Rom is also Rooted so there is no need to do an extra step************
*** I HOPE THSI HELPS ANY PROBLEMS FEEL FREE TO INBOX ME ANY QUESTIONS*** I WILL TRY MY BEST TO HELP......
Sorry guys wrong post this is for Samsung captivate glide! , my mistake..
Sent from my SAMSUNG-SGH-I927R using xda premium
Firmware upgrade encountered an issue. Please select recovery in Kies and try again
This is for Samsung Galaxy Note 2 (Sprint SPH-L900) Is the website for the stock rom
rwilco12.com
stock rom: [ROM][ODIN][TAR]SPH-L900 MA7 (MA7 Modem/Kernel/ROM - Stock
Odin 3 v 1.85 (You Can Google and find it)
ok sweet so I have done this successfully. i really believe you should put this on ur first post so people dont have to do searching and can feel at ease.
1. Start ODIN 3v1.85
2. Enter Download Mode
a. Power the phone off.
b. Plug the usb cable into the computer (not the phone)
c. Hold both sides of the volume rocker down (vol up + vol down)
d. While holding those buttons down, insert the usb cable into your phone.
It may take a second or two for the screen to display with a warning. Press the Volume UP key to download a custom ROM.
3. In ODIN, click PDA and select the PDA.tar file you extracted
4. DO NOT check re-partition, Flash Lock, Phone EFS Clear, Phone bootloader update
5. CHECK Auto Reboot and F.Reset Time
6. Click Start
At the end of the process ODIN's first block will show up as YELLOW with the words PASS and your phone will reboot.
Unplug USB from your phone after first boot.
It worked for me perfectly you don't have to F.Reset
Perhaps you should try the Note 2 forums for a more informative response?
I have the same problem with my tmobile galaxy s ii, T989
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and whenever I start installing a stock room using Odin 1.85 it force close and the phone stays in the same page saying
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
Please help!
Tried everything I know and still not working
I tried two computers and everytime I start odin it forces stop
The screen is still in Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and I guess this is the download mode because I restarted it with volume up and down and pluged the usb and it turns to this screen
I downloaded odin again to make sure it runs ok and also tried it in my wifes phone and it runs with no problem
It is one of two cases, ether the phone is completely dead or the files I am using to be installed are not the correct ones
I tried the files on this post:
http://forum.xda-developers.com/showthread.php?t=1414341
Please tell me what to do
I really need the phone...
This guide shows you how to revert the Galaxy Tab 2 7.0 P3100 to Android 4.0.4 ICS (stock official firmware).
Warning
*. The instructions in this guide are intended for use with the SamsungGalaxy Tab 2 7.0, model number GT-P3100. Applying these instructions on another device or model may produce undesired outcomes.
*. The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
*. Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
*. Read and understand the whole guide first before actually performing the instructions.
Requirements
*. Samsung Galaxy Tab 2 7.0 GT-P3100
*. A Windows PC
*. Install drivers on the PC. You may install the drivers by installing Samsung Kies "or"
Download here : http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-for-Mobile-Phones-1590.shtml
*. Enable USB debugging.
*. Disable antivirus, firewall, and other security software. Also disable Samsung Kies and other software that accesses your phone.Such software can interfere with the procedure in this guide.
*. Download the following files to your computer:* Proper ICS for your country eg. For India, "INU" for your Galaxy Tab 2 7.0 GT-P3100 here : http://samsung-updates.com/device/?id=GT-P3100
*Odin, latest version here http://forum.xda-developers.com/showthread.php?t=2189539
*. Make sure your device¡¯s battery still has at least 70% power. You don¡¯t want the device to shut down in the middle of the procedure.
*. Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
Instructions
1. Using ZIP extraction software, extract the *.tar.md5 file contained in the firmware update package.
2. Extract the contents of Odin to your computer.
3. Turn off your tablet. Make sure it is not hooked up to your PC.
4. Run Odin on your computer by double-clicking Odin
5. Click the PDA button in Odin and load the *.tar.md5 file contained in the firmware update package that you unzipped.
6. Do not change any other setting in Odin. Make sure that the checkbox for ¡°Re-partition¡± is not ticked.
7. Reboot the tablet into Download Mode by holding down the Volume Down and Power buttons until you see the warning screen. Press the Volume Up key to continue to Download Mode.
8. Connect the tablet to your PC via USB cable. You should see an ¡°Added!¡± message on the Odin window.
9. Click the Start button in Odin to begin flashing the firmware to your tablet. When installation completes and succeeds, Odin will display a ¡°PASSED¡± message in one of its boxes. The tablet will also automatically reboot.
10. If, on rebooting, the screen gets stuck at the Samsung logo, try resolving it by doing the following:
*. Turn off the tablet.
*. Boot into Recovery Mode by holding down Power and Volume Up buttons together until the screen turns on. When the Samsung logo appears, let go of the Power button but keep holding down the Volume Up button until the device boots into recovery.
*. In Recovery Mode, select Wipe data/Factory reset and select Yes on next screen.
*. Select Reboot system now to reboot the tablet
Congratulations! You¡¯ve successfully reverted your Samsung Galaxy Tab 2 7.0 to Android 4.0.4 Ice Cream Sandwich.
HIT THANKS!!!
Thanks , the steps worked perfectly..
Vibro feedback OFF
Anybody knows how to turn off fcking vibration feedback / haptic feedback on P3100 (stock 4.2.2) without root??
hi..i wanna back to ICS 4.0.3 XME p3100 XXBLH1..but cant find it
Can't find the US firmware
markapplelover said:
Can't find the US firmware
Click to expand...
Click to collapse
https://www.sammobile.com/
I did that and US does not show in list of countries
Samm off server..
link death
please mirorr link ics
roehan said:
please mirorr link ics
Click to expand...
Click to collapse
Have a look here http://updato.com/firmware-archive-select-model
I have a Samsung Galaxy Mini and I succesfully rooted it, however it seems to be impossible to add cyanogen to it cause ii need clockworkmod recovery
1. I tried downloading it from the stock loader (on the update from sdcard place thing ) and it will just freeze when it comes to Replacing stock recovery with ClockWorkModRecovery. I have tried severall versions of it, including the one that came from the clockworkmod website but all of them just freeze
2. I tried connecting them to the pc but samsung kies can't see my phone and i can't even find all the files needed to use them on Odin
so what do I do????
MrRootGuy said:
I have a Samsung Galaxy Mini and I succesfully rooted it, however it seems to be impossible to add cyanogen to it cause ii need clockworkmod recovery
1. I tried downloading it from the stock loader (on the update from sdcard place thing ) and it will just freeze when it comes to Replacing stock recovery with ClockWorkModRecovery. I have tried severall versions of it, including the one that came from the clockworkmod website but all of them just freeze
2. I tried connecting them to the pc but samsung kies can't see my phone and i can't even find all the files needed to use them on Odin
so what do I do????
Click to expand...
Click to collapse
First of all make sure you installed drivers in Samsung Kies. After, make sure to have working version of odin. Tried connecting the booting into download and see if it detects it?
MrRootGuy said:
I have a Samsung Galaxy Mini and I succesfully rooted it, however it seems to be impossible to add cyanogen to it cause ii need clockworkmod recovery
1. I tried downloading it from the stock loader (on the update from sdcard place thing ) and it will just freeze when it comes to Replacing stock recovery with ClockWorkModRecovery. I have tried severall versions of it, including the one that came from the clockworkmod website but all of them just freeze
2. I tried connecting them to the pc but samsung kies can't see my phone and i can't even find all the files needed to use them on Odin
so what do I do????
Click to expand...
Click to collapse
Make sure your mini has gingerbread and samsung drivers installed on your pc/laptop.
Before you begin please make sure your battery has at least 70% of charge.
1. Download Odin Multidownloader v4.38 for GTS5570, Tass_v1.ops and Clockwork Mod Recovery v4.0.0.5(tass-recovery-cwm.tar) if you do not have them already. (Attachments)
2. Run Odin Multi downloader v4.38 and select the Tass_v1.ops by clicking OPS button.
3. Select One Package Option and Click One Package button and select the tass-recovery-cwm.tar file you downloaded.
Leave other settings to default (i.e. don’t change any other options/settings)
4. When you are done reboot your phone in download mode (Press Volume Down + Home + Power button to go to download mode)
5. Connect your phone in download mode to your computer via USB Cable.
6. When Odin detects your phone (If you see a com port number written in yellow background at the top left, then your phone is detected. View image.), click Start button.
7. Wait till Odin finishes the job (approx. 3-5 minutes) and when it reports ‘PASS’, you can disconnect your phone.
Go to the recovery mode (Press Home + Power button) and see your new recovery with tons of useful options. Now that you have CWM recovery you will be able to do just more than nandroid backups. You can also partition your sdcard as well as flash a custom rom on your galaxy pop. Go ahead and experiment with various options. But, be careful playing with your device’s recovery is very risky task if you lack appropriate information or skill.
Please help me i want to install cwm on my rooted gts5570 froyo using mobile odin lite..
send from my GT s5570 froyo..
Please any body answer...how to install cwm or upgrade my froyo gts5570 without computer...i have odin mobile lite also installed
send from my GT s5570 froyo..
[Q&A] [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary
Q&A for [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rooting GT-I9070
Wishing you a very Happy and progressive new year!!!
Hi Diego, please help me achieve rooting my phone..
pda i9070ddtes
phone i9070ddlf1
CSC Unknown
Region KST
But I from India and want to root this phone
jodha said:
Wishing you a very Happy and progressive new year!!!
Hi Diego, please help me achieve rooting my phone..
pda i9070ddtes
phone i9070ddlf1
CSC Unknown
Region KST
But I from India and want to root this phone
Click to expand...
Click to collapse
Its easy.....all you had to do was SEARCH !!
http://forum.xda-developers.com/showthread.php?t=2087424
EDIT: Flash the latest UBLPK (Argentina) Firmware, smoothest of all.via odin and then Root it with Shaan's Root package given in the above link.
rooting GT-I9070P
Hey, could you please help me root my phone
PDA: I9070PXXLF1
CSC: I9070PMOBLF1
region probably MOB (bought unlocked in Austria but originaly from A1)
REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
link ins't working, anybody got a mirror?
knurd said:
REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
link ins't working, anybody got a mirror?
Click to expand...
Click to collapse
which link /
DaksAnkit said:
which link /
Click to expand...
Click to collapse
http://bitshare.com/files/04xbtfk8/ROOTED_I9070VJLD1_I9070ZTMLD1.rar.html
impossible to download that, tried in every single browser
knurd said:
http://bitshare.com/files/04xbtfk8/ROOTED_I9070VJLD1_I9070ZTMLD1.rar.html
impossible to download that, tried in every single browser
Click to expand...
Click to collapse
yea . man seems like the file does not exist anymore, tell you what just root your latest firmware delete the bloatware / stock apps i think its pretty much the same .
DaksAnkit said:
yea . man seems like the file does not exist anymore, tell you what just root your latest firmware delete the bloatware / stock apps i think its pretty much the same .
Click to expand...
Click to collapse
The problem is that, i cant root it, my phone can't read sd card anymore, so I'm trying to root my device with odin, if I can at least change my recovery mode and read internal storage it would be great...
Root with odin , no sd card
knurd said:
The problem is that, i cant root it, my phone can't read sd card anymore, so I'm trying to root my device with odin, if I can at least change my recovery mode and read internal storage it would be great...
Click to expand...
Click to collapse
HERE : i think this will help you out , but be patience and use common sense when rooting also I AM JUST HERE TO HELP , so DO NOT BLAME ME IF YOU BRICK YOUR PHONE , BUT I CAN SAY THAT IF YOU FOLLOW STEPS YOU WON`T HAVE ANY TROUBLE,
DO DOWNLOAD ESSENTIALS BEFORE FOLLOWING STEPS, FIRTS READ ALL THEN MAKE YOU MIND HOW TO DO IT :
1: ORIGINAL FIRMWARE FROM HERE you will need it to extract original kernel after rooting, or if something goes wrong when rooting
2: SAMSUNG USB DRIVER FOR WIN/MAC.
Make sure that you have backup the data, apps and settings from your Samsung device such as SMS, MMS, Call Logs, Contacts, Images, Audios, Videos, Bookmarks, Wi-Fi, APN settings and MMS settings etc as this process is going to wipe every data from your device.
3. Check of security suites such as antivirus and firewall whether they are disabled on your Computer.
4. You need to turn on the Enable USB Debugging on your Samsung Galaxy S i9070. This can be done simply by following the path ‘Settings > Applications > Development > USB debugging’ and ticking the USB Debugging option box.
5. Please put your battery in charge and make sure that it was charged to at least 80%.
Advice: Before going to start the root process you must go to phone settings->click about phone and look for basedband version number. Note down that number in notepad and save it on the desktop.
Steps and Procedure for Rooting Samsung Galaxy S Advance I9070:
1. Download working ODIN FROM HERE AND Working root package only I9070 from attachement to PC.
2. Once you have downloaded the file, then you need to extract the zip file in the PC.
3. After extraction is done.
4. Launch the Odin application in the computer.
5. Turn off the device in order to enter into download mode. For that do like this press and hold the Volume Down + Home buttons together and Power On the device simultaneously. After 1 min you will get a download mode with green android robot image.
6. Connect your device to the Computer via USB data cable while Odin is open. Once your device get connected, ID:COM section turns yellow in colour. If it doesn’t than you need to reconnect your device.
7. In Odin tool you need to two select two files into their respective fields.
NOW YOU WIL ALSO BE NEEDING A PIT FILE , i have attached both version 8gb and 16 gb PIT FILE choose from there if 8gb then 8gb and vice-versa
8.Click PIT tab and then select the GT-I9070_EUR_XX_8G/16GB.pit file from the extracted folder.
Once you selected the file left side Re-partition filed will be tick marked automatically. So you need to uncheck it manually. For more idea see the below picture.
b) Click PDA section and then select the rootkernel.tar.md5.
c) You need to uncheck all other option except ‘Auto Reboot’ and ‘F Reset Time’.
Click on ‘Start’ button and wait for the process to get completed. The Samsung Galaxy S device will reboot automatically.
9. Now you must try to install Superuser and Busybox from Google Play Store . Once you installed both apps then your device will be rooted successfully. check using root checker app.
Time to switch back to stock original kernel basedband firmware version number. Because above we used kernel for rooting the device have some problems like sudden reboots and lags. So that you need to install exact kernel to the device again. BUT IF YOU DO NOT WANT TO DO ALL THAT , JUST INSTALL ANY CUSTOM ROM / CM11 /cm10 etc ,which has tuned own kernel you will not be needing any of this in the follwoing steps.
HERE READ THIS XDA FORUM TO EXTRACT YOUR ORIGINAL FIRMWARE KERNEL
AFTER THAT AGAIN FOLLOW STEPS
1. Run the Odin application again in the PC.
2.Turn off the device and Boot into Download mode. For that press and hold the Volume Down + Home buttons together and Power On the device.
3. Connect the device to PC via USB cable.
4. Click on PDA tab and select the file which you downloaded recently. I selected (YOURKERNEL).tar.md5 .
5. Click on Start and the process will be completed. The device will be reboot automatically.
That’s it your device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here:good:
good luck
DaksAnkit said:
HERE : i think this will help you out , but be patience and use common sense when rooting also I AM JUST HERE TO HELP , so DO NOT BLAME ME IF YOU BRICK YOUR PHONE , BUT I CAN SAY THAT IF YOU FOLLOW STEPS YOU WON`T HAVE ANY TROUBLE,
DO DOWNLOAD ESSENTIALS BEFORE FOLLOWING STEPS, FIRTS READ ALL THEN MAKE YOU MIND HOW TO DO IT :
1: ORIGINAL FIRMWARE FROM HERE you will need it to extract original kernel after rooting, or if something goes wrong when rooting
2: SAMSUNG USB DRIVER FOR WIN/MAC.
Make sure that you have backup the data, apps and settings from your Samsung device such as SMS, MMS, Call Logs, Contacts, Images, Audios, Videos, Bookmarks, Wi-Fi, APN settings and MMS settings etc as this process is going to wipe every data from your device.
3. Check of security suites such as antivirus and firewall whether they are disabled on your Computer.
4. You need to turn on the Enable USB Debugging on your Samsung Galaxy S i9070. This can be done simply by following the path ‘Settings > Applications > Development > USB debugging’ and ticking the USB Debugging option box.
5. Please put your battery in charge and make sure that it was charged to at least 80%.
Advice: Before going to start the root process you must go to phone settings->click about phone and look for basedband version number. Note down that number in notepad and save it on the desktop.
Steps and Procedure for Rooting Samsung Galaxy S Advance I9070:
1. Download working ODIN FROM HERE AND Working root package only I9070 from attachement to PC.
2. Once you have downloaded the file, then you need to extract the zip file in the PC.
3. After extraction is done.
4. Launch the Odin application in the computer.
5. Turn off the device in order to enter into download mode. For that do like this press and hold the Volume Down + Home buttons together and Power On the device simultaneously. After 1 min you will get a download mode with green android robot image.
6. Connect your device to the Computer via USB data cable while Odin is open. Once your device get connected, ID:COM section turns yellow in colour. If it doesn’t than you need to reconnect your device.
7. In Odin tool you need to two select two files into their respective fields.
NOW YOU WIL ALSO BE NEEDING A PIT FILE , i have attached both version 8gb and 16 gb PIT FILE choose from there if 8gb then 8gb and vice-versa
8.Click PIT tab and then select the GT-I9070_EUR_XX_8G/16GB.pit file from the extracted folder.
Once you selected the file left side Re-partition filed will be tick marked automatically. So you need to uncheck it manually. For more idea see the below picture.
b) Click PDA section and then select the rootkernel.tar.md5.
c) You need to uncheck all other option except ‘Auto Reboot’ and ‘F Reset Time’.
Click on ‘Start’ button and wait for the process to get completed. The Samsung Galaxy S device will reboot automatically.
9. Now you must try to install Superuser and Busybox from Google Play Store . Once you installed both apps then your device will be rooted successfully. check using root checker app.
Time to switch back to stock original kernel basedband firmware version number. Because above we used kernel for rooting the device have some problems like sudden reboots and lags. So that you need to install exact kernel to the device again. BUT IF YOU DO NOT WANT TO DO ALL THAT , JUST INSTALL ANY CUSTOM ROM / CM11 /cm10 etc ,which has tuned own kernel you will not be needing any of this in the follwoing steps.
HERE READ THIS XDA FORUM TO EXTRACT YOUR ORIGINAL FIRMWARE KERNEL
AFTER THAT AGAIN FOLLOW STEPS
1. Run the Odin application again in the PC.
2.Turn off the device and Boot into Download mode. For that press and hold the Volume Down + Home buttons together and Power On the device.
3. Connect the device to PC via USB cable.
4. Click on PDA tab and select the file which you downloaded recently. I selected (YOURKERNEL).tar.md5 .
5. Click on Start and the process will be completed. The device will be reboot automatically.
That’s it your device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here:good:
good luck
Click to expand...
Click to collapse
couldn't find PDA on Odin3 v3.10, i installed with Odin3 v1.87 and i got bootloop after step 8c
@knurd : in latest version PA is same as PDA , AND DID ODIN SHOWED SUCCESS after finishing installation of root kernel ?
if you getting boot loop just go to recovery ,clear/delete cache and reboot 99 out of 100 times it solves bootloop.
DaksAnkit said:
@knurd : in latest version PA is same as PDA , AND DID ODIN SHOWED SUCCESS after finishing installation of root kernel ?
if you getting boot loop just go to recovery ,clear/delete cache and reboot 99 out of 100 times it solves bootloop.
Click to expand...
Click to collapse
yes, success...
i did the instalation with odin and still with boot loop, and the sad part is, i can't get into recovery...
knurd said:
yes, success...
i did the instalation with odin and still with boot loop, and the sad part is, i can't get into recovery...
Click to expand...
Click to collapse
oh man , flash the stock ROM in download mode , and post steps by step how u tried to flash root.kernel,
i think some more experienced person would be able to help you i am too semi-noob here ! I have no idea why i didn`t worked.
to root you can try this method .
YOU CAN TRY ROOTING BY APP ROOTGENIUS
good luck :good: