Database Develop

No Connection with PC

I cant understand that I couldnt connect i897 to my pc. Beforehands I have never had such a problem. I tried 4 different PC but nothing changed. After plug in it starts to charge my phone and ask me the connection type. I choose mass storage but then nothing happens...
I tried many methods but didnt work. Now I decide to upgrade to KK1 from KH3 but it also didnt recognize my phone in download mode.
HELP

Are you sure you you have the correct drivers? It could be a bad cable. Have you ever used heimdall?
Sent from my ICS powered Captivate.

I tried 3 different cable and all of them were working good before. I uninstalled antivirus program and installed different drivers and many other stuff to have healty connection, but nothing happened.
I also reset and wipe data from the phone but nothing changed. Now I think that it could be hardware problem. There is no reasinable way that I find. So need help

Click on my signature below and then go to the "Connection Issues..." link from there.

4-2ndtwin said:
Click on my signature below and then go to the "Connection Issues..." link from there.
Click to expand...
Click to collapse
No way didnt work... I only havent tried different OS. May be it will work with different OS. It is very strange that I connected my phone any of my PCs without a problem. But suddenly it stopped working with any of them.

4-2ndtwin said:
Click on my signature below and then go to the "Connection Issues..." link from there.
Click to expand...
Click to collapse
I can connect my phone with bluetooth. Is there a way to upgrade UCKK4 with CWM recovery. As I rememder I can do this with update.zip file. If yes, how can I find this file?

I downloaded fasty kk4 for captivate and upgrade my phone with CWM recovery.
It looks fine but It still doesnt recognize my PC. When I plug phone to pc menu is coming and I choose mass storage then nothing happens. As I know I am using right drivers because it were the drivers working fine before.
Is there any advise at that point? Is it a hardware problem? By the way I am using comodo internet security.
Link that I downloaded fasty KK4:
http://forum.xda-developers.com/showthread.php?t=1360854&page=12

After all I cant open my phone After last update with UCKK4 it was working fine. Then I decided to apply lagfix. I loaded update.zip in sd card then update it in CWM. After it was loaded. It starts to open recovery mode everytime.
Firstly At&t logo is apperaring for 2 times then recovery mode is coming. I cant connect my phone to PC in any way.
As a result, My phone is unusable. Is there a way to make it working?

What about using button combo to boot into recovery and reflash a Rom that u have on you sdcard.

When I use combo button it opens recovery modes but I dont know why, it is limited. I just can choose 4 options that;
-Wipe user data
-Wipe cache data
-reload(or smthg like this) package
-reboot
When I choose reload, it starts to apply lagfix. After it starts it automatically comes to recovery mode again. I loaded the kk4 update in external sd and open in recovery mode, but it didnt load this file. May be I need to reach to internal sd somewhat but I cant.

Em_Tech said:
When I use combo button it opens recovery modes but I dont know why, it is limited. I just can choose 4 options that;
-Wipe user data
-Wipe cache data
-reload(or smthg like this) package
-reboot
When I choose reload, it starts to apply lagfix. After it starts it automatically comes to recovery mode again. I loaded the kk4 update in external sd and open in recovery mode, but it didnt load this file. May be I need to reach to internal sd somewhat but I cant.
Click to expand...
Click to collapse
Yeah, I think u messed up when u loaded the "update.zip" previously. There's no need for that on Gingerbread. Just flashing a dev kernel that has cwm recovery baked in will do. But regardless, what's done is done. You have just got to get into download mode somehow and flash a dev kernel then flash a dev rom or Odin/Heimdall back to a Stock.
?? What about wipe data/ factory reset from the recovery and then see if it will boot up.
Other than that u have gotta get into download mode. Have u gotta jig ? If not, look in my sig link below for links on how to make one or where to buy one.

Thanks for your care. I just check the link about jig. But it seems hard to apply for me and I just open the phone in download mode. The problem is the phone dont recognize the PC. I am now trying to connect the phone to my PC on Linux. Should I setup special driver to recognize the phone by Linux?
If I cant succeed, I will try jtag or smthg else. Thanks for your help 4_2ndtwen.

Using Extermal SD in Download Mode

My problem is I cant recognize my captivate to any pc because of a weird problem. So I have to use my extarnal sd somehow to flash my phone and hence to open&use it again.
Now after I open my phone it shows at&t screen for a while then open recovery mode. It occured after I apply lagfix.
I need help guys...

So your trying to flash a rom from the SD card without a computer? Have you got root already?
don't do school and stay in drugs?

Yes, lastly, I upgraded fasty UCKK4 and I was rooted. Then I tried to appy Lagfix and load the update.zip in extarnal sd and Set it up from CWM recovery. It was the last time to open my Phone after that So After My phone is opened it shows at&t screen and then goes to CWM recovery.
so I need to see external SD from CWM. But there is no such an option in it. Unfortunately My USB connection is not working. I cant find any alternative wayy

So I have a couple possible solutions try going to install from SD card go to external SD card and find the zip see if that does it if not try going to mounts and storage see if there is someway to mount the external SD card and lastly and most likely not to work would be to wipe the phone back to factory after that not sure let me know how that goes buddy
don't do school and stay in drugs?

Firstly I want to emphasis that I just can reach CWM mode in my captivate. No usb connection I have and no operating system can be opened. So I thought that I have 2 choice to repair my captivate;
1- there is may be an alternative way to see extarnal Sd inside so that to load the setup from there and fix the phone software again. I load a firmware and opened recovery mode and hit the reinstall. But it loaded from internal again. so npthing changed.
2- I must repair my phone's USB port to have an healty connection. Bacause it is now only charging. Is there any way to fix it easily that somebody knows? To date, I couldnt though I have tried thousands methods and drivers to ensure a connection.
so I am in trouble, I need a professional advise and help bra... !

Em_Tech said:
I load a firmware and opened recovery mode and hit the reinstall.
Click to expand...
Click to collapse
Do you have CWM, or stock 2e/3e recovery? If you have stock recovery, which I'm guessing you do because you referenced "reinstall packages," I suspect you are screwed.
If you have CWM, you might be able to do it. These menu choices are from CWM 5 from the Glitch kernel, so your options might be a little different depending on what you are using. On mine, under "Install Zip from SD Card," there's "Choose Zip from Internal SD" which for me is really my external SD. You should be able to flash your zip from here.
If you borked it up flashing a lagfix, I think you're going to have issues with anything you flash at this point. If you have an option in CWM to disable lagfix, you should try this first before you flash anything else. If you can't get anything else to work, you should be able to flash CM7 because it will repartition for you and fix what lagfix messed up, but you may not be able to get back to anything else afterward.
If you actually manage to get it up and running again, LEAVE IT ALONE! If you keep flashing, you're eventually going to end up in a situation that's not recoverable from recovery and you'll have a paperweight (if you're not there already).

In cwm recovery which I used is 2e , There are 4 options;
- reboot system
- reinstall packages
- wipe user data
- wiper cache data
as you can gues, I tried all options also added a firmware to extarnal sd and hit the reinstall packages, but it just reinstall lagfix which is in internal sd and it started to loop.
I think second option is to be applied anymore. I need to have repaired my captivate's usb port

Em_Tech said:
In cwm recovery which I used is 2e , There are 4 options;
- reboot system
- reinstall packages
- wipe user data
- wiper cache data
as you can gues, I tried all options also added a firmware to extarnal sd and hit the reinstall packages, but it just reinstall lagfix which is in internal sd and it started to loop.
I think second option is to be applied anymore. I need to have repaired my captivate's usb port
Click to expand...
Click to collapse
How do you know something is wrong with the USB? Have you tried going into download mode?
Sent from my (CM9) ICS i897 Captivate

Yes I got into download mode. There is no problem about that. But Pc dont recognize my phone. so it become useless.

Em_Tech said:
Yes I got into download mode. There is no problem about that. But Pc dont recognize my phone. so it become useless.
Click to expand...
Click to collapse
So download mode with the picture of the Android guy digging? You seemed confused because your title mentions download mode but you only mention recovery in your post.
Open up heimdall or Odin, it should recognize your phone
Sent from my (CM9) ICS i897 Captivate

I should have asked before, but have you gone through this entire thread? http://forum.xda-developers.com/showthread.php?t=1351224 The third section about connection issues would be most relevant to your situation.

It is exactly going into download mode. The problem is after getting into download mode it never recognizes with pc and hence with odin. So I gave up trying with odin and looking for alternative ways such as using recovery mode or anything else that I dont know and may be some professional knows.
Tu sum up, I cant have a connection between pc and Captivate because its usb port is not working properly(suddenly gone).
Captivate just can be open in download mode and in recovery mode. But because of usb port is not working I cant flash it. Recovery mode dont recognize external sd so I cant flash it again.
Note: Connection problem is npt a driver or cable issue. I am almost sure about this.

I understand your issue, the third section of the link I sent you was a list of ways to troubleshoot a non-working USB connection. I just figured I would check since these forums are littered with people who swear that they can't connect to their computer until someone tells them to try a new cable or USB port and it magically starts working. If you have already tried all of those steps, you are leaps and bounds ahead of most who come on here looking for help with this problem.
I asked because there is nothing that you can do at this point without a working USB port. You are only going to be able to flash whatever is named update.zip from your internal SD, which as you already know isn't going to help you at all. ClockworkMod Recovery would let you do what you need to do, but you're not going to be able to get it on there without either a working USB connection or being able to boot up normally.

Need help with internal storage!

Well guys....i think this problem stems from me prematurely removing the usb cord. I Understand that. But here is the other couple of predicaments. lol Ok i'm on ICS Stunna 4.3 ......well after something went wrong i'm unable to "repair" my internal storage. Everything still works smooth....but i can't add things to my internal card. Every time i hook up to the computer it says it needs to scan and fix the card.Well the problem is starts to fix it.....but never does....progress bar never finishes. Tried this on 3 different computers. Nothing.So try to install a different rom....i have some on my internal and external. Always aborts in cmw....never finishes. So on top of all this Stunna has started acting odd. Likely read errors.....but problem is i can't switch roms! lol I have tried everything. I was wondering should i format both cards? But if i do that how can i back everything up if i can't access my card? Any help would be appreciated guys. Hoping i don't have to Odin back to stock.
Cliffs- Internal storage won't repair on any computer-Can't install anything in CMW because of it

I have the exact same problem now, as you do. CWM can't install any .zip files, I can't flash Abyss kernel, so it's just stuck in that end.
I installed ICS Stunner 4.5 coming from GB with full wipe. This happened to me after I tried to copy some files over to external SD Card and it failed, seemed like the phone froze (SOD), so I figured flashing another modem would do the trick (read it in ICS Stunner thread's 1st post). Tried to transfer the file over a cable, but same thing happened. After rebooting I just grabbed it from dropbox and installed the modem successfully. I went ahead to try and fix the mounting problem, so I plug in the cable and it offers me to scan and fix both partitions (internal and external). External card finishes successfully, but not the internal one. And after that I'm in the same situation as OP.
Any ideas anyone?

Enable usb debugging(setting-appl-development)
Connect to pc
Select to copy file to fr computer from notification
You will find separate drive letter for int n ext card
Rt click on int sd card letter n format(you can backup imp data to pc b4 this)
Hope it shud b fixed
Sent from my GT-N7000 using xda premium

Gonna try it now. Have lots of pictures to backup first tho
EDIT: Same thing happens as with scan and fix procedure. It starts and just sits there, nothing happens. When I try to stop "USB Storage in use" it just shows the spinner and hangs in there. Only holding the power button helps solve this. My guess is something in the internal SD card partition is broken... just can't say what or how to fix it.

OrangGeeGee said:
Gonna try it now. Have lots of pictures to backup first tho
EDIT: Same thing happens as with scan and fix procedure. It starts and just sits there, nothing happens. When I try to stop "USB Storage in use" it just shows the spinner and hangs in there. Only holding the power button helps solve this. My guess is something in the internal SD card partition is broken... just can't say what or how to fix it.
Click to expand...
Click to collapse
Same problem^^^^ Not sure what to do about all this

Short story:
Formatting didn't work.
Long story:
Okay, so following the idea to format the internal sd card's partition, I achieved it not through Windows format dialog, but through the half-broken CWM. Both my SD Cards were formated (internal and external) in the process. So since I used the external one for backing up important info I had to use [email protected] UNDELETE to get it back (after booting to ICS). In the process the native SD Card mount service seemed like broken, I had to perform a few hard resets. Hangs seemed to occur whenever I tried writing to one of the cards. I downloaded multi-mount SD card app from Play Store and transfered AbyssKernel's .zip and now when I try to install it from CWM it says
Installing: /sdcard/AbyssNotekernel42RedTouchOriginalLogo.zip
Finding update package...
Opening update package...
Installing update...
Click to expand...
Click to collapse
And that's it... so basically back to the start. Any more ideas?

Please help if you have any ideas on what might work. Us 2 guys are in trouble...lol

I don't know if this will help or not but give it a try.
Enter into the download mode and flash any stock firmware using PC Odin. This way you don't need to access any of the cards. After flashing stock ROM, try fixing the internal SD again and if it still doesn't fix, send in your note to Samsung for repairs.
Sounds too simple to be working though but worth a shot.
Sent from my GT-N7000 using XDA

Well for now the phone works, but it's stuck on ICS Stunner. I was thinking to use PC Odin or Mobile ODIN, but what if it doesn't work because the partition is corrupted in some way (as it is now, because CWM can't flash anything).
I'd like to hear more insight before I go the odin-way

OrangGeeGee said:
Well for now the phone works, but it's stuck on ICS Stunner. I was thinking to use PC Odin or Mobile ODIN, but what if it doesn't work because the partition is corrupted in some way (as it is now, because CWM can't flash anything).
I'd like to hear more insight before I go the odin-way
Click to expand...
Click to collapse
I'm about to go ahead and give in to odin....lol I'll keep you updated

OrangGeeGee said:
Well for now the phone works, but it's stuck on ICS Stunner. I was thinking to use PC Odin or Mobile ODIN, but what if it doesn't work because the partition is corrupted in some way (as it is now, because CWM can't flash anything).
I'd like to hear more insight before I go the odin-way
Click to expand...
Click to collapse
Check out this reply from anti. This is the fix using the pit file option. Try Odin flashing of stock rom....but m doubtful it will work. Fingers crossed!! Hope it gets well for you both
http://forum.xda-developers.com/showpost.php?p=24783218&postcount=3306

Twistedchild420 said:
I'm about to go ahead and give in to odin....lol I'll keep you updated
Click to expand...
Click to collapse
I'm downloading an old GB rom myself..
While I am, I can share a thought: I feel that ICS is not yet ready.. at least not for me. Feels nice and fast but buggy USB transfers is a big no-go for me. Also after trying AOSP derived ROM, I decided to wait for a good Samsung edition ICS because all the little tweaks add a good feeling to the experience, I tend to miss them on AOSP or AOKP or w/e
abhisahara said:
Check out this reply from anti. This is the fix using the pit file option. Try Odin flashing of stock rom....but m doubtful it will work. Fingers crossed!! Hope it gets well for you both
http://forum.xda-developers.com/showpost.php?p=24783218&postcount=3306
Click to expand...
Click to collapse
Oooh thanks! Didn't know this. So now I'm pretty confident because if flashing conventionally fails I'll just repartition and get rid of all the partition errors. What do you know, I feel like I learned something new today

SOB! Just did the whole Odin to stock thing and i am stuck in a bootloop! lol

I think my problem is used a .tar instead of .pit.....where can i get the .pit?

Ye same happened to me. Reboot to recovery (volume up + home + power) and do a data wipe/factory reset. After that it boots. Rooted and flashed CWM just fine after that, copying my old GB nandroid backup to SD card as I write

OrangGeeGee said:
Ye same happened to me. Reboot to recovery (volume up + home + power) and do a data wipe/factory reset. After that it boots. Rooted and flashed CWM just fine after that, copying my old GB nandroid backup to SD card as I write
Click to expand...
Click to collapse
Thanks man! That worked!

Twistedchild420 said:
Thanks man! That worked!
Click to expand...
Click to collapse
Glad it helped!
Too bad for me, since I had recovered the latest nandroid with undelete software (cus external sd was accidentally formatted) and now I'm getting a MD5 mismatch Guess I might as well start fresh now, since the last good backup is like 2 months old... Another lesson for me.. always keep your nandroids safe

So everything fine now??
Sent from my GT-N7000 using XDA

sujal said:
So everything fine now??
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Yeah. After quite a time of failed attempts we succeeded. ODIN > Stock GB ROM > ROOT + CMW > Anything you like. No re-partitioning was needed in the process

i have same problem but more complicated. iam on stock GB and its happened after flash bad kernel
the case in detail's :
i flashed wrong kernel on my device previously and now when iam trying to flash another kernel even use ODIN or CWM everything going well and completed but when check i found the old kernel still. i tried many times with same results and no error .
- system can read/write/mount the internal memory but the new pasted files deleted after restart. external card behave normal and i can preform flash using files pasted on it.
- in CWM wipe/format/flash operations running well but no effect on device even restarted to CWM only.
- device has yellow triangle. is it effected?
- the devil kernel stacked in machine is 2.6.35.7-gb4846d2 [email protected] #2 and the build no. is jpkj4
system running normal but cannot keep any changes i do if restarted.
-system rooted and no problem with root
-can access adb
- ODIN behave same CWM, operation work but no change.
can anyone help me guys?
i did repartition the memory useing PIT for note butno change also
thank you all in advance

[Q] Problem flashing from USB Key

Dear All,
I need some help!
I had a weird issue with my tab over the weekend where it would boot to the upgrading dialog, but would only say application 1 of 1, rather than the usual 50+. This would run for hours, so I decided just to reflash the os again without a clean wipe. I imagine this may have been a bad idea. So, I went into CWM and went to flash again, but the tablet crashed just as it started the flashing process, which was bad enough. However, when I went back into CWM, I remembered Nandroid backup and I hoped I had made one! However, rather than hit recover, I selected store (clicked without thinking), which was the cherry on the top of my day of major you-know-whats.
So, the .zip (I think it is v10.1) appears to be corrupt, so I can't flash my original again.
I can't boot the OS to transfer over a new .zip (10.2 would be nice) as I normally would, as I can't start Android at all.
Putting the files on a FAT-formatted USB key isn't recognised by CWM. Trying to mount usb storage gave an error regarding lun path.
So, my questions are:
1) Is there a way to transfer an image onto the internal storage of my tab via CWM, or get it to recognise the USB storage?
2) What are my other options, if 1) isn't possible.
3) If 2) is answered in the negative, have I just made myself a fancy coaster and a good excuse to get a LG G-Pad?
Thanks for your help!

If you can boot to download mode you can use ODIN to flash a rom.

upconvert said:
If you can boot to download mode you can use ODIN to flash a rom.
Click to expand...
Click to collapse
Hi upconvert,
Thanks for the suggestion.
I can get to download mode and I did try to flash a stock ROM from a hotfiles link provided elsewhere on this site last night. However, at NAND Write Start I get three errors on my tablet: WritePartition, DownloadPartition_odin, and Tegra_Nand_Write. I'm not sure what they mean (google didn't reveal any added info). I'm assuming it means the flash storage is either write-protected or can't be found?
I'm going to try and download the ROM again in case it was corrupted somehow. I will retry in the meantime but after I've wiped it again. Any other suggestions would be helpful.
Thanks

Ok, I was able to wipe /data, but it seems to be hanging when trying to wipe /cache. I'd expect it to be finishing in a few seconds, but this is going for minutes.
shcassacazz said:
Hi upconvert,
Thanks for the suggestion.
I can get to download mode and I did try to flash a stock ROM from a hotfiles link provided elsewhere on this site last night. However, at NAND Write Start I get three errors on my tablet: WritePartition, DownloadPartition_odin, and Tegra_Nand_Write. I'm not sure what they mean (google didn't reveal any added info). I'm assuming it means the flash storage is either write-protected or can't be found?
I'm going to try and download the ROM again in case it was corrupted somehow. I will retry in the meantime but after I've wiped it again. Any other suggestions would be helpful.
Thanks
Click to expand...
Click to collapse

So, I've not been able to get anywhere with this. I also can't download a new odin tarball after what happened to hotfile. Anyone got any suggestions as to why the nand write errors are happening? Has the storage drive actually died on the tablet?
shcassacazz said:
Ok, I was able to wipe /data, but it seems to be hanging when trying to wipe /cache. I'd expect it to be finishing in a few seconds, but this is going for minutes.
Click to expand...
Click to collapse

shcassacazz said:
So, I've not been able to get anywhere with this. I also can't download a new odin tarball after what happened to hotfile. Anyone got any suggestions as to why the nand write errors are happening? Has the storage drive actually died on the tablet?
Click to expand...
Click to collapse
Have you tried to format your sdcard from CWM?, cuz formatting it might let the nand write errors disappear
I didn't follow everything you said so I don't know if you've tried the adb files push through USB or not
so if computer can recognise your device through adb try this METHOD
Oh and by the way, SAMMobile website has a new mirror website, so now you can download Odin tar files again
Directly Here is the latest FW for P7300 , and if you're more comfortable with dev-host mirror than Here you go (the two files are the same latest release)
and Here is the the latest FW for P7310, I don't have any other mirrors for that

Hi,
Thanks for the reply. I can't even get access to CWM anymore. Goes straight to Odin download mode after the Samsung splash screen. Unfortunately, I found another post on XDA that seems to explain my problem:
http://forum.xda-developers.com/showthread.php?t=1532636&page=3
I think the HDD has died completely, as I am getting exactly what that chap was getting. I can't install a PIT file. I couldn't access my sdcard from CWM previously either. Sounds like tablet is a goner. Will post to Samsung and see what they say.
Thanks for your time.
omarainea said:
Have you tried to format your sdcard from CWM?, cuz formatting it might let the nand write errors disappear
I didn't follow everything you said so I don't know if you've tried the adb files push through USB or not
so if computer can recognise your device through adb try this METHOD
Oh and by the way, SAMMobile website has a new mirror website, so now you can download Odin tar files again
Directly Here is the latest FW for P7300 , and if you're more comfortable with dev-host mirror than Here you go (the two files are the same latest release)
and Here is the the latest FW for P7310, I don't have any other mirrors for that
Click to expand...
Click to collapse

Tab repaired by Samsung
Ok, eventually sent my tab off to Samsung for warranty repair. Received it back and working fine now. Not sure what they did in the end, but got my tab back at least. Thanks for everyone's help.
This thread can be closed.
shcassacazz said:
Hi,
Thanks for the reply. I can't even get access to CWM anymore. Goes straight to Odin download mode after the Samsung splash screen. Unfortunately, I found another post on XDA that seems to explain my problem:
http://forum.xda-developers.com/showthread.php?t=1532636&page=3
I think the HDD has died completely, as I am getting exactly what that chap was getting. I can't install a PIT file. I couldn't access my sdcard from CWM previously either. Sounds like tablet is a goner. Will post to Samsung and see what they say.
Thanks for your time.
Click to expand...
Click to collapse

Pls help deleted official OS

Hi,
could you pleas help me. I was installing, wiping ROMs in safestrap and didnt pay attention and wipe stock ROM all the system everything. I can get to recovery mod but dont know what to do? Is it possilbe just download and install something in recovery?
Thank you

You actually have a couple options, I think.
If you have a physical microsd card and you can put it in your computer, you can put a zip on there and then flash it from safestrap. But that doesn't seem likely...
Thanks to sdshadow I have another idea. Hold both volume buttons when you turn the phone on. Then use you computer (run rsdlite or the Droid 4 utility) to flash an sbf file to your phone. Obviously this requires a data cable between your computer and phone.
I don't remember how it works, but I think you can transfer a zip from your computer to your phone using a data cable without booting an OS (using adb, I think).
Hopefully this helps or someone else can give you clearer instructions. I'll do a little more research if I need to.

theprogramguy said:
You actually have a couple options, I think.
If you have a physical microsd card and you can put it in your computer, you can put a zip on there and then flash it from safestrap. But that doesn't seem likely...
Thanks to sdshadow I have another idea. Hold both volume buttons when you turn the phone on. Then use you computer (run rsdlite or the Droid 4 utility) to flash an sbf file to your phone. Obviously this requires a data cable between your computer and phone.
I don't remember how it works, but I think you can transfer a zip from your computer to your phone using a data cable without booting an OS (using adb, I think).
Hopefully this helps or someone else can give you clearer instructions. I'll do a little more research if I need to.
Click to expand...
Click to collapse
thank you for answer. Trying to fix it fast before batter died. SD card I can use but dont know how to use safestrap because the safestrap doesnt come up. I can only go to recovery or fastboot but the option 2 is problem that RSD doesnt seen my device. its connect but I cant only unzip files in rsd but no flash it :/

I should still have installed CM 10.2 on rom 1 in safestrap but I dont know how to open safestrap. Because I wipe stock rom the stock rom I have still active and reboot device :/

Ah, I got recovery and SafeStrap mixed up. I have reached the end of my small knowledge.

tofmik said:
I should still have installed CM 10.2 on rom 1 in safestrap but I dont know how to open safestrap. Because I wipe stock rom the stock rom I have still active and reboot device :/
Click to expand...
Click to collapse
try Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, may boot directly to SafeStrap.
if that does not work
may need to re-install drivers or at least look in window device manager to see if it is listed correctly
see my drivers errors
if drivers are correct, RSD lite/Droid 4 utility should see Droid 4.

The phone si ok.
Thank you very much for help!