Figured I'd give a heads-up on this, since this issue doesn't seem to be well-known, and it bit me.
When I got my Nexus 5 and was initially setting it up, it connected to my 5Ghz home network, and let me know an update was available. This was the initial update described here.
Bizarrely, after the update downloaded and installed, my Nexus 5 couldn't see my home WiFI network anymore. It turns out that the update had disabled support for some WiFi bands in the 5Ghz range!
There's a bit more discussion of this here in the Q&A forum.
It seems like the bands that work are (there may be more, but these are confirmed): 34, 40, 44, 48, 149, 161.
Given that my experience clearly demonstrates that the Nexus 5's hardware is capable of supporting more 5Ghz bands than it currently does. Hopefully, in the future either Google or ROM developers here can enable them again.
manekineko said:
Figured I'd give a heads-up on this, since this issue doesn't seem to be well-known, and it bit me.
When I got my Nexus 5 and was initially setting it up, it connected to my 5Ghz home network, and let me know an update was available. This was the initial update described here.
Bizarrely, after the update downloaded and installed, my Nexus 5 couldn't see my home WiFI network anymore. It turns out that the update had disabled support for some WiFi bands in the 5Ghz range!
There's a bit more discussion of this here in the Q&A forum.
It seems like the bands that work are (there may be more, but these are confirmed): 34, 40, 44, 48, 149, 161.
Given that my experience clearly demonstrates that the Nexus 5's hardware is capable of supporting more 5Ghz bands than it currently does. Hopefully, in the future either Google or ROM developers here can enable them again.
Click to expand...
Click to collapse
You dont happen to have a apple router? Co-worker had the same issue on two nexus 5. Before the update he was able to connect to his 5Ghz channel. He is not able to even see his SSID (5GHz) He stated that he has no issue on his Nexus 7 running 4.4.
dazz87 said:
You dont happen to have a apple router? Co-worker had the same issue on two nexus 5. Before the update he was able to connect to his 5Ghz channel. He is not able to even see his SSID (5GHz) He stated that he has no issue on his Nexus 7 running 4.4.
Click to expand...
Click to collapse
I don't, I have a Linksys router running Tomato. I bet your co-worker's Apple router's only issue is that he was using one of the 5Ghz bands that the update disabled for whatever reason.
Related
I think I may have found a difference between hardware rev_10 and rev_11, and I'd like to ask for some help in either proving or disproving my theory.
I have two rev_10 N4s here, and I've noticed both do not see and cannot connect to WiFi networks operating on channels 12 and 13.
I mentioned this to someone a different forum, and after exchanging a few posts and screenshots it became clear that his N4, a rev_11 device, was able to connect to networks on channels 12 and 13.
So the question I'm asking is: Which hardware version do you have, and can you see and connect to WiFi networks on channels 12 and 13?
The only thing I'd point out when testing is to make sure the network is only operating on one channel as it will likely still pick up two-channel networks on the other channel.
Thanks in advance.
My Nexus is rev_10 and can connect to my wifi router in channel 13 without problems.
I had a problem at the begining because my SSID was hidden and I need to unhide it in order to connect. But I solve it with a market program called "Hidden SSID Enabler" that allow me to connect to my hidden SSID again without unhide it first. But I use always channel 13.
i had some issues with it yesterday.. that suddenly wifi vanished off my nexus but was working on my gtab10.1
is this anything to do with the wifi issue u mentioned here
VivaErBetis said:
My Nexus is rev_10 and can connect to my wifi routethe networkr in channel 13 without problems.
I had a problem at the begining because my SSID was hidden and I need to unhide it in order to connect. But I solve it with a market program called "Hidden SSID Enabler" that allow me to connect to my hidden SSID again without unhide it first. But I use always channel 13.
Click to expand...
Click to collapse
I connected to my hidden network without any issues... You just have to "add" the hidden network. Also r10 here.
Hi
Rusty2k said:
I think I may have found a difference between hardware rev_10 and rev_11, and I'd like to ask for some help in either proving or disproving my theory.
I have two rev_10 N4s here, and I've noticed both do not see and cannot connect to WiFi networks operating on channels 12 and 13.
I mentioned this to someone a different forum, and after exchanging a few posts and screenshots it became clear that his N4, a rev_11 device, was able to connect to networks on channels 12 and 13.
So the question I'm asking is: Which hardware version do you have, and can you see and connect to WiFi networks on channels 12 and 13?
The only thing I'd point out when testing is to make sure the network is only operating on one channel as it will likely still pick up two-channel networks on the other channel.
Thanks in advance.
Click to expand...
Click to collapse
It might be a regulatory issue and this isn't uncommon. For some reason the Rev 10 phones may think they are in a different country, and are in a country which is forbidden to use bands 12 and 13. Do these phones have SIM cards? It might be the SIM card/network that the phone uses to confirm the country for radio connections.
I've a rev 10 and I am on band 13 no problem.
Regards
Phil
I kind of suspect this too.. WiFi reception is pretty weak compared to my s2 running cm 10.1 on the same location in my apartment. But doesn't really matter...
Sent from my Nexus 4 using xda premium
xzr3b0rnzx said:
I kind of suspect this too.. WiFi reception is pretty weak compared to my s2 running cm 10.1 on the same location in my apartment. But doesn't really matter...
Click to expand...
Click to collapse
I have a nexus 7 and a rev 10 nexus 4. They both work fine on Wi-Fi. What do you mean that the nexus 4 isn't working well compared top the other device? Are you just going by the meter?
Sent from my Nexus 7 using xda app-developers app
Hi mate I have the same problem than you. My nexus 4 rev11 cant connect with a wifi network in channel 13. And my old Htc Desire works fine.
I've had this exact issue with my N4 I received last week. Mine did actually work but only if I left it alone for several hours. Once ti connected, it worked well and was stable. If I restarted my WiFi or restarted my phone, the problem is back unless I wait several hours!
Then yesterday, I changed my wireless channel from 13 to 8 and voila, instantaneous connections much faster than my iPhone 4. It seems like the wireless receiver in the N4 is of a lower quality compared to other phones.
Rusty2k said:
I think I may have found a difference between hardware rev_10 and rev_11, and I'd like to ask for some help in either proving or disproving my theory.
I have two rev_10 N4s here, and I've noticed both do not see and cannot connect to WiFi networks operating on channels 12 and 13.
I mentioned this to someone a different forum, and after exchanging a few posts and screenshots it became clear that his N4, a rev_11 device, was able to connect to networks on channels 12 and 13.
So the question I'm asking is: Which hardware version do you have, and can you see and connect to WiFi networks on channels 12 and 13?
The only thing I'd point out when testing is to make sure the network is only operating on one channel as it will likely still pick up two-channel networks on the other channel.
Thanks in advance.
Click to expand...
Click to collapse
Relax dude. No WiFi hardware change from rev_10 to rev_11.
How do I check what rev I'm on?
I've got a Rev_10, no wifi issues at all with my phone. In fact, it gets better signal than my plastic backed Asus Transformer, and my old S2.
We need more people with rev11 to try the bug please try it!!
Put your wifi AP in channel 13 and try to connect the nexus to the network,
Edit: Same problem with channel 12 seems that all the Nexus have the USA wifi policy
Well I think it that apart from policies nexus has software issues related to WiFi just like BT.Its simple we are bug testers for 4.2.1
Sent from my Nexus 4 using xda app-developers app
I have same problem with Nexus 4 rev 11 device with Android 4.2.1
channel 13 & 12 broken
Most likely your 12-13 bands are disabled... I remember something from other phones I had where you could enable the non-US channels?
Sent from my Nexus 4 using xda app-developers app
bogdi1988 said:
Most likely your 12-13 bands are disabled... I remember something from other phones I had where you could enable the non-US channels?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Maybe someone can try following this thread. It was for the Icona A500, but it looks like all they're doing is changing wifi_country_code to EU in /data/data/com.android.providers.settings/databases/settings.db
Yesterday I get the 4.2.2 OTA and now I can connect with the wifi channels 12 & 13.
How do I find out what revision I'm on?
I've been having some problems too with my Channel 13 wifi. My regulatory area was set to Europe (there was no narrower option), and I assure you it's more than legal to use Channel 12 and 13 in my area.
My Nexus 4 kept dropping off the network, and when it did so, the SSID would disappear from my phone's list. My desktop, which was less than a meter away, was still working fine. I had to restart the phone's wifi each time this happened.
I figured it was my ISP's router being dumb at DHCP (the phone's IP was assigned in that way) so I replaced the ISP's router with one of my DD-WRT routers so that I could better log the issue. Still had the problem. At first I wanted to start logging what was happening, but then I remembered the oddity about my network being on Channel 13.
I switched it to Channel 1, all problems were solved.
How do I find out what revision I'm on? I'm currently on CM10.1.0 RC1, which is supposed to be based upon Android 4.2.2.
Stock 4.2.2 here, 306K device (Rev_11) - managed to see & connect to Channel 12/13 only if switched the frequency from "Auto" to "2.4Ghz only" (or from "2.4Ghz only" to "Auto") in WiFi advanced options menu.
It amazes me how Google let us wait for months with these broken wifi/bt drivers. Hopefully 4.3 will fix these.
Hi all,
I was wondering if anyone have had issues with the phone not showing any wifi 5ghz bands?
My phone is not showing or connecting to these networks and am just wondering why? I've tryed changing the auto to 5 no luck, I've wiped the device, rebooting and have tryied chaing the channels with no luck.
My device is running ARHD22 which is 4.3 and my router is a cisco EA4500. Annoying thing is that the iPhones and laptops are picking it up. I've even changed the SID for this band to check if I could see it but the phone will only show and connect to the 2.4ghz band.
Thanks
Sent from my HTC One using xda app-developers app
HTC One Dual-SIM 5Ghz WiFi Problems
Hello,
I'm having the same issue - brand new HTC One Dual SIM running Android 4.2.2.
Will display and connect to all 2.4Ghz networks perfectly, but anything 5Ghz it won't even detect, or connect if I add them manually to the saved settings list - tried it with all the 8 APs at work and my two Ubiquiti UniFi APs (Pro & Outdoor 5G) at home and no luck.
Being a work phone they've said we've got to send it back to the supplier rather than to HTC, but this is the second phone I've had with exactly the same problem.
Called up HTC and after about an hour of troubleshooting everything involved until they believed me, they said there wasn't anything they could think of - but it's a little weird for two to have the same problem right out of the box!
Apart from hard reset, wipe cache partition and safe mode - anything else anyone can suggest could fix it?
Regards,
iamacarpetlicker
wadyas said:
Hi all,
I was wondering if anyone have had issues with the phone not showing any wifi 5ghz bands?
My phone is not showing or connecting to these networks and am just wondering why? I've tryed changing the auto to 5 no luck, I've wiped the device, rebooting and have tryied chaing the channels with no luck.
My device is running ARHD22 which is 4.3 and my router is a cisco EA4500. Annoying thing is that the iPhones and laptops are picking it up. I've even changed the SID for this band to check if I could see it but the phone will only show and connect to the 2.4ghz band.
Thanks
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Sorry, yes ARHD 53 isn't compatible with dual-SIM. But my Single SIM even on stock unrooted could easily pick up 5GHz bands
raghav kapur said:
My One on all Sense ROMs perfectly works on 5GHz bands. But Google Play roms don't play well. Update to ARHD 53 and try. 22 is REALLY outdates\d
Click to expand...
Click to collapse
Please edit your post!!
ARHD 53.0 is not compatible with Dual-SIM HTC One M7
Just an update on the issue if anyone is having the same problems.
We had our 4th Dual SIM handset delivered today (from a completely different supplier and production batch) which still had the same issue, unable to locate 5Ghz networks and unable to even attempt to connect to them.
We also noticed during debugging that if you switch to 5Ghz only in the menu and go back, it'll be unable to find any networks, but if you then turn the WiFi off and on again, it'll then show you a random selection of 2.4Ghz networks, even though the radio should be in 5Ghz only mode.
Because these are company owned devices to be used as work phones, we can't use custom ROMs.
I've been on the phone with HTC a lot today and after finding the support desk were no help, the comany I work for got me in touch with the Corporate Sales Manager over there and we had a conference call with their tech team.
They said it appears to be a software fault affecting all handsets of this model, but are unable to confirm if it is with all 5Ghz access points (we've only tested with Ubiquiti and Apple APs) as they seem to think it works for them in the lab.
We are getting shipped two debug handsets on Monday, one running 4.2.2 they have tested in their lab and one with the latest official 4.4 ROM that they said is due for release next week, to test before release to see if it resolves the issue.
Will post the results hopefully on Tuesday.
iamacarpetlicker said:
Just an update on the issue if anyone is having the same problems.
We had our 4th Dual SIM handset delivered today (from a completely different supplier and production batch) which still had the same issue, unable to locate 5Ghz networks and unable to even attempt to connect to them.
We also noticed during debugging that if you switch to 5Ghz only in the menu and go back, it'll be unable to find any networks, but if you then turn the WiFi off and on again, it'll then show you a random selection of 2.4Ghz networks, even though the radio should be in 5Ghz only mode.
Because these are company owned devices to be used as work phones, we can't use custom ROMs.
I've been on the phone with HTC a lot today and after finding the support desk were no help, the comany I work for got me in touch with the Corporate Sales Manager over there and we had a conference call with their tech team.
They said it appears to be a software fault affecting all handsets of this model, but are unable to confirm if it is with all 5Ghz access points (we've only tested with Ubiquiti and Apple APs) as they seem to think it works for them in the lab.
We are getting shipped two debug handsets on Monday, one running 4.2.2 they have tested in their lab and one with the latest official 4.4 ROM that they said is due for release next week, to test before release to see if it resolves the issue.
Will post the results hopefully on Tuesday.
Click to expand...
Click to collapse
i know this is probably not the case, but just in case: http://android-revolution-hd.blogspot.com/2014/02/how-to-fix-wi-fi-htc-one.html
try with 5 characters or less.
Thanks for the reply nkk71.
Doing that along with renaming the Bluetooth too then rebooting the device was one of their debugging steps on the phone earlier, but still no joy .. Appreciate the suggestion though!
iamacarpetlicker said:
Thanks for the reply nkk71.
Doing that along with renaming the Bluetooth too then rebooting the device was one of their debugging steps on the phone earlier, but still no joy .. Appreciate the suggestion though!
Click to expand...
Click to collapse
how about changing channel number?
Yes they suggested it could be something to do with the channel, but so far we've tested:
Indoor at work (Ubiquiti UniFi Pro): 140
Indoor at home (Ubiquiti UniFi Pro): 136
Outdoor at home (Ubiquiti UniFi Outdoor 5G): 128
Test Network at Home (Apple AirPort Extreme): 100
Which according to goo.gl/azMC91 are all in Band B of the 5Ghz spectrum and require DFS compliance.
But the strange thing being, my personal HTC One X connects to all the networks perfectly fine - and in the case of the work APs, we've got ~40 other devices connected on 5Ghz as we use it exclusively, half of those being Android phones, so I guess if it doesn't support those channels, that's kind of a bug in itself?
iamacarpetlicker said:
Yes they suggested it could be something to do with the channel, but so far we've tested:
Indoor at work (Ubiquiti UniFi Pro): 140
Indoor at home (Ubiquiti UniFi Pro): 136
Outdoor at home (Ubiquiti UniFi Outdoor 5G): 128
Test Network at Home (Apple AirPort Extreme): 100
Which according to goo.gl/azMC91 are all in Band B of the 5Ghz spectrum and require DFS compliance.
But the strange thing being, my personal HTC One X connects to all the networks perfectly fine - and in the case of the work APs, we've got ~40 other devices connected on 5Ghz as we use it exclusively, half of those being Android phones, so I guess if it doesn't support those channels, that's kind of a bug in itself?
Click to expand...
Click to collapse
How about non-dual-sim HTCs?
PS: i'm just throwing ideas out.... nothing concrete !! (otherwise i would have said so)
That's ok, help greatly appreciated.
Like I said, my One X works great on those networks - as for a more similar matched HTC One (non-dual-sim), I know our Directors all had them when they first came out and they definitely worked as we've been using 5Ghz exclusively on those APs for some time now and I'd have had a lot of ear ache if they didn't, but I haven't seen them using them in a long time and they could possibly have been pre-release handsets given as gifts if that could make any difference, so couldn't confirm for the latest firmware updates / model revisions.. I'll have to see if our returns department has one I can borrow on Monday to test and confirm.
I'm hoping it is just a software thing and the 4.4 ROM they're shipping us to test next week will fix, as I read a few posts that the HTC One did originally have a few problems with 5Ghz when that was on 4.2.2, fixed by an upgrade to 4.3 which obviously never made it to the Dual SIM.. It was a little hard to tell from the post descriptions if the problem was indeed the same or not.
Hello,
We've been having internet troubles so I couldn't post the update on Monday, but good news.
Got in on Monday to a message from HTC - they decided over the weekend that rather than shipping me the debug phones to test, they had released the 4.4 OTA update that morning to everybody with a Dual-SIM handset and to just try updating it.
I asked them if they could test it their end before shipping the handsets out to me, so I can only assume they realised it was a problem - or they were just ready with the update - who am I to speculate.
Installed the update and the 5Ghz WiFi now works perfectly - shows up in the list and connects as expected with speeds that are stunning!
Seeing as all phones still come with 4.2.2 out of the box, you'll either need working 2.4Ghz WiFi to download the update (which was hard for us) or support did send me a link to a Windows based updater program to update the phone via USB. They said I'm not allowed to share, but I guess they'd provide it if you called up and asked for it.
You say your phone connects on the 5GHz network, but have you seen if it's connecting on the 802.11N or the 802.11AC network?
My ONE will connect on the N network on 5GHz, but not the AC network.
I've tried Auto channel selection and manually assigning channels, still no go with the AC network.
iamacarpetlicker said:
Hello,
We've been having internet troubles so I couldn't post the update on Monday, but good news.
Got in on Monday to a message from HTC - they decided over the weekend that rather than shipping me the debug phones to test, they had released the 4.4 OTA update that morning to everybody with a Dual-SIM handset and to just try updating it.
I asked them if they could test it their end before shipping the handsets out to me, so I can only assume they realised it was a problem - or they were just ready with the update - who am I to speculate.
Installed the update and the 5Ghz WiFi now works perfectly - shows up in the list and connects as expected with speeds that are stunning!
Seeing as all phones still come with 4.2.2 out of the box, you'll either need working 2.4Ghz WiFi to download the update (which was hard for us) or support did send me a link to a Windows based updater program to update the phone via USB. They said I'm not allowed to share, but I guess they'd provide it if you called up and asked for it.
Click to expand...
Click to collapse
OneCheekyDevil said:
You say your phone connects on the 5GHz network, but have you seen if it's connecting on the 802.11N or the 802.11AC network?
My ONE will connect on the N network on 5GHz, but not the AC network.
I've tried Auto channel selection and manually assigning channels, still no go with the AC network.
Click to expand...
Click to collapse
I found that on the ac network the htc one m8 will only connect when signal is broadcast on channels 32 26 or 40.
Try it out and see if you have any success
I regularly setup wifi networks that use all 21 5GHz channels and I need to tune them for phone antennas. I've been trying to find a way to make my Nexus 6 use all the available 5GHz channels but so far I haven't found anything. It currently supports the UNII-1 and UNII-3 bands as well as the ISM channel but the UNII-2 and UNII-2E bands aren't visible to the device. As far as I can tell it isn't a limitation of the hardware but a software choice made by Google because scanning all 21 channels uses up too much battery.
So anyone know how to force the Nexus 6 to see the entire 5GHz band?
I'd be interested in this info also.
Bump.
Gentle bump.
Nexus 6 DFS
Xypher99 said:
Gentle bump.
Click to expand...
Click to collapse
Anone found anything out on this. Google support and Motorola T3 don't even know what channels it should see. I'm baffled and have a phone replacement arriving tomorrow
The best I've found in some really deep support forums is that the hardware "technically" supports it but the hit to battery life when scanning all 21 5GHz channels isn't acceptable. That's why they've disabled it in base android. Someone would have to custom write a driver and it probably would hit battery life in an unacceptable way.
They finally enabled all 5GHz WiFi channels in the latest driver.
You can get it with this kernel: http://forum.xda-developers.com/nex...ernel-leankernel-minimalistic-kernel-t2954316
Hi Friends,
I've been experiencing some really weird behaviour on my Moto X 1st gen.
My Phone is not Rooted, not flashed... It's all stock running the latest software (Android 4.4.2 Kit Kat) for a while.
Recently I've noticed my Phone stopped connecting to my Wifi Network. It can search for networks and find them, but as soon as I try to connect It to the networks, they become out of range on the list or simply "Saved" and not connected. The Networks WONT connect at all... never ever.
Doing some tests tho, I noticed that my Moto X fails to connect to all 2.4Ghz Networks... It can only connect to 5Ghz ones. I can't figure out why. Tried Clearing Cache Partition, Data Wipe from inside Android and from Bootloader menu... all with no success.
What I come here to ask is: Are there 2 Wifi Radios on the Phone, one of 2,4Ghz frequency and one 5Ghz Frequency? Are there Two antennas and maybe one of them got broken? Do you guys think that re-flashing a Radio Firmware may fix the problem?
Many Wifi Networks run under the 2.4Ghz band. So It is quite important to me to have It working.
I'm asking if I should bother trying because Flashing Radios and Kernels has It's risks, and this phone is my Daily Driver, so I come to you for help or new ideas on how to solve It.
Thanks in advance.
Look in the advanced Wifi settings (three dot menu at lower right when in the network list) and see if the frequency band is set to Auto. If it is set to 5ghz. Putting it on Auto is probably your best bet.
fury683 said:
Look in the advanced Wifi settings (three dot menu at lower right when in the network list) and see if the frequency band is set to Auto. If it is set to 5ghz. Putting it on Auto is probably your best bet.
Click to expand...
Click to collapse
I checked every configuration... I even discovered that the phone doesnt connect specifically to 2.4Ghz networks by switching It first to 2.4Ghz-Only to filter the 5Ghz Networks out and see that no Network connected and then I switched to 5Ghz to check and see that 5Ghz networks do work.
My guess is that Radio Firmware got this strange behaviour after I installed Netgear WiFi Network Analytics App(It started happening after that, afterall)... It might have changed some configuration on the Firmware that I do not have access through the System UI, and is not OS-wise, because not even factory reset worked to fi this... so Only thing that I didnt try yet was a Radio Re-Flash.
Maybe I'll just try It. Or my WiFI Radio just broke.
Hey just replaced my Netgear R6300 with the Netgear R7000 and I am running into the same issue.
My Moto X and my Razr Maxx HD have the same issue seeing the 2.4Ghz, but see the 5Ghz just fine.
All other devices in the household see the 2.4Ghz fine, it just seem's to be the phone's.
Any ideas? I tried two different R7000, and working with Netgear, but no dice.
It's not a biggy, as I have verified it only impact's the phones, and I can set them to 5Ghz anyways.
I was just wondering if anybody has seen this too.
Very odd that it's two different devices. Are you certain that the network is using both bands?
I have the identical problem described in this thread.
Only difference not yet noted is that maybe 1 time out of 50 it will connect to the 2.4ghz network, and stay connected for a few hours. Then it will go back to not working at all for days, weeks.
I've been trying to fix this for months. More than a few people seem to be having the same problem. I've tried every combination of router/phone setting imaginable. Don't think there's an easy fix to this other than new phone or new router.
Have the same problem, 5ghz works fine but 2.4ghz don't works for weeks. it started this spring. Anybody fond something that helps?
Mathieu2k4 said:
Have the same problem, 5ghz works fine but 2.4ghz don't works for weeks. it started this spring. Anybody fond something that helps?
Click to expand...
Click to collapse
Update: I've recently been in deep on this problem with Motorola technical support. Several hours on the phone with them, explaining the issue over and over, bug reports, email exchanges, etc etc etc. Tier 4.
At the end of the day, company policy rules and they wont look after me because my phone is outside of the 1 year warranty. I'm still paying for this phone on contract. Not cool. They won't see another dime from me!
I have the same issue on my Moto X XT1097 Lollipop 5.1
:crying:
luc23 said:
Update: I've recently been in deep on this problem with Motorola technical support. Several hours on the phone with them, explaining the issue over and over, bug reports, email exchanges, etc etc etc. Tier 4.
At the end of the day, company policy rules and they wont look after me because my phone is outside of the 1 year warranty. I'm still paying for this phone on contract. Not cool. They won't see another dime from me!
Click to expand...
Click to collapse
Same issue. If I reboot the phone it will connect to a 2.4 ghz network for about 5 minutes... then unable to see the network.
Exact Same Issue, Xiaomi mi5s, it started after i dropped it in water and took it right back, opened in full and dryed everything, the phone is working now in perfect condition except for this issue, i have to gess is a harware problem
I'm not sure if this is a networking issue or phone issue, but I think I got this narrowed down to a phone issue.
I currently have a 105mbps plan through Comcast and all is working well except my Nexus 6 WiFi SpeedTest maxes out at around 20-22mbps.
Currently routing with a WRT1200AC Router with both 2.4 and 5ghz bands enabled.
I am aware the Nexus 6 supports 802.11ac; therefore I connected to my 5ghz band network. The nexus shows i'm getting a solid 360mbps connection to the router. However when doing a SpeedTest it caps at 20-22mbps (I should be getting around 105mbps). I suspect no issue with the router as I tested with a 802.11ac supported laptop and was screaming past my 105mbps speed. Based off some google searches I found that possible causes were maybe some power saving features, those have been turned off.
Troubleshooting I have done:
- Moved my 5ghz band to different channels
- Tried different 5ghz channel widths
- Tested speed on 2.4ghz band (Same Results)
- Tested Another Nexus 6 (I tried running a speedtest with a family members N6 running pure stock rom/unrooted and same results as with my Custom Rom'd N6)
- Disabled Carrier Radio leaving only wifi on.
- Reboot Phone, Router, toggled wifi Off and on.
Any other suggestions? It would be pretty disappointing of Google / Motorola if this was the result of hardware capabilities.
Select a different server on Speed Test.
not seeing that issue here...
graydiggy said:
Select a different server on Speed Test.
Click to expand...
Click to collapse
Tried a couple different servers, same outcome
uicnren said:
not seeing that issue here...
Click to expand...
Click to collapse
OK thanks for looking!
hmmmm