Is it full or half bricked ? - HD7 Q&A, Help & Troubleshooting

When clicking on Vol Dn with POWER I got the Tri-color screen with one line inside it
does this mean it is full or half bricked ?
what could be done ?

khashabawy said:
When clicking on Vol Dn with POWER I got the Tri-color screen with one line inside it
does this mean it is full or half bricked ?
what could be done ?
Click to expand...
Click to collapse
full bricked....riff box can solve this hope so...
\

Related

[HELP] Wrong firmwire on european Galaxy S

While trying to restore my phone to default, my computer installed at&ts firmwire to my phone. It won't start, just flashing the at&t screen. The original firmwire were JP2. How can I restore the phone back to the download state or do I have a brick in my hand?
Can u enter download mode?
- Remove Battery for about 1 Minute
- Reinsert Battery
- Press VOLUME DOWN + HOME + POWER
- Now you should see a yellow triangle. This is the download mode.
- Start flashing a fresh firmware with Odin (see big faq thread for infos http://forum.xda-developers.com/showthread.php?t=723596)
Nope, it only shows either black screen or the at&t logo...
Well some galaxy s phones have download mode disabled, looks like you've bricked.
Sent from my GT-I9000 using XDA App
Americans must go to hell...
Send it to me!!!
I´ll attach four little wheels to the phone and use it as a finger-skateboard. ;-)
Aery said:
Send it to me!!!
I´ll attach four little wheels to the phone and use it as a finger-skateboard. ;-)
Click to expand...
Click to collapse
I don't think it's funny...
Sent from my GT-I9000 using XDA App
not funny at all.
hey jontsku, can you not get into download mode at all? there's a thread where a guy forced his galaxy to download mode by using heat. can't find it right now coz i'm mobile. it's pretty risky imho so prolly have it as a last resort and wait for other, safer solutions...
Sent from my GT-I9000 using XDA App
jontsku said:
Americans must go to hell...
Click to expand...
Click to collapse
JTAG service will be available in Finland shortly.
Voids the warranty, ain´t cheap either... But less anyway than the price of new motherboard at service.
jontsku said:
While trying to restore my phone to default, my computer installed at&ts firmwire to my phone. It won't start, just flashing the at&t screen. The original firmwire were JP2. How can I restore the phone back to the download state or do I have a brick in my hand?
Click to expand...
Click to collapse
Too bad mate. I bought mine but from Ebay.co.uk. Always prefer to buy from there instead of Finland since the devices are cheap to buy and are trouble free. But all hope is not lost
mingersoft.com/blog/2010/09/samsung-galaxy-s-why-download-and-recovery-modes-are-missing/
Im pretty sure someone else had the same issue and hot round it by using the dubug tools to reboot the phone into download (cant rememebr)
There was a tread on here i think
laggedHero said:
I don't think it's funny...
Click to expand...
Click to collapse
It's a little funny..
There should be a way to get it working, we just don't know what it is yet..
I sure do hope so...
When someone took their phone to samsung they were told that it damages one of the buses. Only way to fix - change motherboard.
Sent from my GT-I9000 using XDA App
Try the galaxy s bootmode app.
Sent from my GT-I9000 using XDA App
Try this
Have to quickly remove & put back the battery, then press the 3 keys repeatedly (vol down, home & on button).
Click to expand...
Click to collapse
Or:
If that doesn't work, or if your phone is frozen:
1. Turn the power off. If your Samsung Galaxy S is frozen, pull the battery out and reinsert it
2. Hold the Volume Down button
3. Press and release the Power button
4. You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Press and release the Power button
7. Now simply confirm your decision: Volume Up for YES and Volume Down for NO
Click to expand...
Click to collapse
And there was a trick something like phone off loading press home and vol down
It seems that the firmware installation didn't finish properly, so the device boots every time after showing the at&t logo. And odly when you plug the usb (datacable or charcher) it dies. But when you take it off the device start againg with the logos.
Did you tried the hard reset ?
If that doesn't work, or if your phone is frozen:
1. Turn the power off. If your Samsung Galaxy S is frozen, pull the battery out and reinsert it
2. Hold the Volume Down button
3. Press and release the Power button
4. You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Press and release the Power button
7. Now simply confirm your decision: Volume Up for YES and Volume Down for NO
Click to expand...
Click to collapse
None of the key combinations work. Phone just flashes the at&t logo
i think we had the "at&t" bootloader topic several times already or didn't we? i feel very sorry for you jontsku but i'm pretty sure that your device can only be restored by jtag or changing the board. what i don't understand is why people still use the captivate version of odin to flash (destroy) their phones ... maybe some mod should put a huge blinking warning in the howto-flash section ...
and @
Americans must go to hell...
Click to expand...
Click to collapse
lol, it's only your fault for not reading enough before flashing and choosing the wrong odin/firmware

[q] big problem

My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Lasarus said:
My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Click to expand...
Click to collapse
try this:
read all steps first
turn off phone
pull out battery wait ten seconds
put battery back in (leave cover off)
hold the power button + hold volume down
press the soft restart button* (while still holding the power button + volume down)
keep buttons held down till you see the white screen and green logo.
note* push the button with stylus it is hidden under where the stylus goes in next to the camera.
plug into the computer and run SUES it'll say already have latest version update anyways? click yes
i had to do this when i bricked my phone, (my computer crashed while i was doing the update) it really saved my day.

Urgent soft brick issue!!

Sorry to double post but I have a major issue with my One Developer Edition. I tried to run the RUU after relocking my bootloader and I have the HTC surrounded by triangles with exclamation points.
I cant get off of this screen. PLEASE HELP.
Hold the vol - + Power Key imeadly when the Back and home button lights wait........ not release the keys press with nose the home button
There are no lights flashing. Just the HTC Logo in the middle of a black screen with triangles with exclamation points in them in the corners.
garment69 said:
There are no lights flashing. Just the HTC Logo in the middle of a black screen with triangles with exclamation points in them in the corners.
Click to expand...
Click to collapse
Can you not get into your boot loader by holding down power until phone turns off and then vol- and power?
an0ther said:
Can you not get into your boot loader by holding down power until phone turns off and then vol- and power?
Click to expand...
Click to collapse
No. When I hold the power down, the screen goes off. I then hold volume down and nothing happens. I just wind up back at the black screen with the HTC logo and triangles.
garment69 said:
No. When I hold the power down, the screen goes off. I then hold volume down and nothing happens. I just wind up back at the black screen with the HTC logo and triangles.
Click to expand...
Click to collapse
I ran the RUU again and it came back to life.
Thanks for all those who tried to help.
or put usb kabel in pc and hold vol- and power or unplug the usb cabel and test it
Yup
garment69 said:
I ran the RUU again and it came back to life.
Thanks for all those who tried to help.
Click to expand...
Click to collapse
I know this is an old thread but I wanted to reaffirm that the solution for me was to "fastboot oem rebootRUU" again and then the firmware I was attempting to update. Run twice and then "fastboot reboot".
The initial firmware update failed on one of the radio portions and phone would only boot to HTC logo with the corner triangle exclamations. When the USB cable was pulled during this screen it would show the white bootloader screen but the text wasn't complete.
I genuinely thought I had bricked it. But all good now.

[Q] Motorola razr i XT890 not booting just green light

Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
mobishack said:
Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
Click to expand...
Click to collapse
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
No luck tried this
Hazou said:
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
Click to expand...
Click to collapse
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
mobishack said:
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
Click to expand...
Click to collapse
What if u try it again. Hold all 4 buttons, while the phone is connected to power for 10sec. After that release the power and volume up button. So u hold volume down all the time. See what happens.
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
aquilesboy said:
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
Click to expand...
Click to collapse
You can only try to flash ifwi and dnx as I did but I also had no success and also Moto themselves couldn't fix the phone.
If your phone is still in warranty it will get replaced, otherwise you can throw it away.
i had this problem when my battery was deeply unloaded. i had to load it with an powersource with 1A and a factory cable. that worked for me...
Help ,, please emergency !!!!
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. Please help.

[Q] How to exit Download Mode

Hello, I booted into download mode VolUp+Power+Home and now I see the Downloading blue screen but I see no way to restart the phone from this mode. Any help would be great
Thanks
EDIT: Hold all the buttons brings up a boot menu option one is normal boot
chooven said:
Hello, I booted into download mode VolUp+Power+Home and now I see the Downloading blue screen but I see no way to restart the phone from this mode. Any help would be great
Thanks
EDIT: Hold all the buttons brings up a boot menu option one is normal boot
Click to expand...
Click to collapse
It doesn't bring up a menu for me. Could you re-phrase what you said "Hold all the buttons brings up a boot menu"
ysrini said:
It doesn't bring up a menu for me. Could you re-phrase what you said "Hold all the buttons brings up a boot menu"
Click to expand...
Click to collapse
While in the Downloading screen, Push and hold vol up and down and power and the main button for a few seconds and you will get a menu that has a reboot normal option
chooven said:
While in the Downloading screen, Push and hold vol up and down and power and the main button for a few seconds and you will get a menu that has a reboot normal option
Click to expand...
Click to collapse
Thanks,
This worked for me , - "To get out of the Galaxy S6 Download Mode, you’ll need to press and hold the Power button and the Volume Down button at the same time."
Source
chooven said:
Hello, I booted into download mode VolUp+Power+Home and now I see the Downloading blue screen but I see no way to restart the phone from this mode. Any help would be great
Thanks
EDIT: Hold all the buttons brings up a boot menu option one is normal boot
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=bii27UQYAoc
How to enter and exit download mode on the Galaxy S6 (Edge)
Hope that helps too.
EliSyed said:
https://www.youtube.com/watch?v=bii27UQYAoc
How to enter and exit download mode on the Galaxy S6 (Edge)
Hope that helps too.
Click to expand...
Click to collapse
I am trying to get in to the bootloader mode but its not letting me. Its like "fastboot" is enabled and wont go into bootloader mode. Any have success getting into bootloader mode? I tried adb reboot bootloader, it just reboots the phone, doesn't go into bootloader.
I think because it's locked. You'll have to do a bit of research on how to unlock it. I'm not really sure though
Sent from my Galaxy S6 Edge (Platinum Gold)
EliSyed said:
I think because it's locked. You'll have to do a bit of research on how to unlock it. I'm not really sure though
Sent from my Galaxy S6 Edge (Platinum Gold)
Click to expand...
Click to collapse
Ill do some research. Its probably locked we we can't unlock the bootloader.
chooven said:
While in the Downloading screen, Push and hold vol up and down and power and the main button for a few seconds and you will get a menu that has a reboot normal option
Click to expand...
Click to collapse
thanks
chooven said:
While in the Downloading screen, Push and hold vol up and down and power and the main button for a few seconds and you will get a menu that has a reboot normal option
Click to expand...
Click to collapse
Thanks bro! Worked fine for me!
Greetings!
chooven said:
While in the Downloading screen, Push and hold vol up and down and power and the main button for a few seconds and you will get a menu that has a reboot normal option
Click to expand...
Click to collapse
It worked for me, thank you .
chooven said:
While in the Downloading screen, Push and hold vol up and down and power and the main button for a few seconds and you will get a menu that has a reboot normal option
Click to expand...
Click to collapse
sorry...but i want to get out of the adb apply but i cant't... and nothing work not ...i hold it accidantly when i was resetting the phone and now i'am stuck and i can not remove battery on my s6 please help:crying:
ysrini said:
Thanks,
This worked for me , - "To get out of the Galaxy S6 Download Mode, you’ll need to press and hold the Power button and the Volume Down button at the same time."
Source
Click to expand...
Click to collapse
thanks bro. It worked for me too.
pakitis said:
thanks bro. It worked for me too.
Click to expand...
Click to collapse
When I get to Download mode,it says to push volume up but neither volume up or down responds, so I'm locked out of DL mode.
Any thoughts?
chooven said:
Hello, I booted into download mode VolUp+Power+Home and now I see the Downloading blue screen but I see no way to restart the phone from this mode. Any help would be great
Thanks
EDIT: Hold all the buttons brings up a boot menu option one is normal boot
Click to expand...
Click to collapse
thank you so much i thought that i was gong to have a panic attack
I have an s6 edge and when I woke up it was stuck on a bright blue "Downloading please do not turn off the device" message and in the top left it had the device name and. binary type and lock mode ect. nothing made the screen go away till i held all four buttons at once for a few seconds. Unfortunately, all that did was lock the screen so now I cant see anying and no button combination seems to work or have any effect. (FYI: My phone was charging when I woke up (it should have full charge))
ysrini said:
Thanks,
This worked for me , - "To get out of the Galaxy S6 Download Mode, you’ll need to press and hold the Power button and the Volume Down button at the same time."
Source
Click to expand...
Click to collapse
that's way worked on Samasung Galaxy J7 too
How to fix my screen (LCD)
Please is there anyone to help me fix my Samsung S6 screen (Lcd) ,the phone has fallen down and develop a big straight line on the screen which is deflecting my viewing .Anyone to help me get a second hand screen or lcd willng to send it to Zimbabwe please,Help
I got a rainbow screen just now that would go away if you tapped but would come right back. My battery drained from about 60% to 5% in a few seconds. I restarted normally and it booted into the Downloading Please Do NOt Turn Off bright blue/green screen. Followed instructions to hold the volume down, power, and home keys and got to the reboot screen. Booted into safe mode and plugged my phone in, within about a minute the rainbow screen came back and my battery (which was charging) drained away the last 5%.
It's off and charging now, does anyone have any idea what's causing this to happen?
what can you do if that still doesn't do nothing....

Categories

Resources