Help me ! Imei null - Galaxy S III Mini Q&A, Help & Troubleshooting

My phone is rooted . And everything work normally after root .
But yesterday I found my phone is not working .
now my phone is no service and IMEI null and Baseband unknown .
Also when I press status in about phone in settings , he said Unfortunately , the process com.android.phone has stopped .
And I opened efs folder using Root Explorer , I couldn't find nv_data something like that inside .
Can someone give me a way to solve this ?

tommyvca said:
My phone is rooted . And everything work normally after root .
But yesterday I found my phone is not working .
now my phone is no service and IMEI null and Baseband unknown .
Also when I press status in about phone in settings , he said Unfortunately , the process com.android.phone has stopped .
And I opened efs folder using Root Explorer , I couldn't find nv_data something like that inside .
Can someone give me a way to solve this ?
Click to expand...
Click to collapse
A couple of ways to fix i 1) if you backed up your efs partition 2) you have nandroid backups to revert to 3) take it in for repair. 4) try using kies firmware to restore (if it just disappeared for no reason it might work, if you flashed a rom and this happened, then your chances are low.

another problem occured
Exothermic said:
A couple of ways to fix i 1) if you backed up your efs partition 2) you have nandroid backups to revert to 3) take it in for repair. 4) try using kies firmware to restore (if it just disappeared for no reason it might work, if you flashed a rom and this happened, then your chances are low.
Click to expand...
Click to collapse
I have no backup of anything and I try some ways in other website . Now my phone cant turn it on . It only stay at I8190N booting screen.
I turned to recovery mode and everything was failed to mount or open . I dont know why my phone being like this .:crying::crying::crying:
It seems serious than before a lot .

tommyvca said:
I have no backup of anything and I try some ways in other website . Now my phone cant turn it on . It only stay at I8190N booting screen.
I turned to recovery mode and everything was failed to mount or open . I dont know why my phone being like this .:crying::crying::crying:
It seems serious than before a lot .
Click to expand...
Click to collapse
Is it international i8190?
Flash servicefirmware and see if it resolves any of your problems.
http://forum.xda-developers.com/showthread.php?t=2157105
Edit: Ok i8190N.. I got ervice firmware for that one too somewhere. Give me some time to find it..
Edit 2: Here's a link to i8190N service fw that I've pre-rooted. Unzip and flash in odin.
Make sure drivers is installed, Kill everything with kies in your computers taskmanager, open odin, connect phone to usb and wait for it to be found.
Put "CODE"tar.md5 in PDA and "CSC"tar.md5 in CSC.
Press start and wait for it to finish.
I8190NXXALL4_693204_REV00_user_low_ship-PreRoot.zip

tys0n said:
Is it international i8190?
Flash servicefirmware and see if it resolves any of your problems.
http://forum.xda-developers.com/showthread.php?t=2157105
Edit: Ok i8190N.. I got ervice firmware for that one too somewhere. Give me some time to find it..
Edit 2: Here's a link to i8190N service fw that I've pre-rooted. Unzip and flash in odin.
Make sure drivers is installed, Kill everything with kies in your computers taskmanager, open odin, connect phone to usb and wait for it to be found.
Put "CODE"tar.md5 in PDA and "CSC"tar.md5 in CSC.
Press start and wait for it to finish.
I8190NXXALL4_693204_REV00_user_low_ship-PreRoot.zip
Click to expand...
Click to collapse
Will I lost all thing inside ?

tys0n said:
Is it international i8190?
Flash servicefirmware and see if it resolves any of your problems.
http://forum.xda-developers.com/showthread.php?t=2157105
Edit: Ok i8190N.. I got ervice firmware for that one too somewhere. Give me some time to find it..
Edit 2: Here's a link to i8190N service fw that I've pre-rooted. Unzip and flash in odin.
Make sure drivers is installed, Kill everything with kies in your computers taskmanager, open odin, connect phone to usb and wait for it to be found.
Put "CODE"tar.md5 in PDA and "CSC"tar.md5 in CSC.
Press start and wait for it to finish.
I8190NXXALL4_693204_REV00_user_low_ship-PreRoot.zip
Click to expand...
Click to collapse
It had no change and I got into recovery mode without pressing the combos key .

tommyvca said:
It had no change and I got into recovery mode without pressing the combos key .
Click to expand...
Click to collapse
Yes, you will loose all, but may get your phone to at least boot.
Btw, do you have warranty left?
Whatever pic' you have attached, i can't get it to load.

tys0n said:
Yes, you will loose all, but may get your phone to at least boot.
Btw, do you have warranty left?
Whatever pic' you have attached, i can't get it to load
Click to expand...
Click to collapse
I flash your file using odin but problem still was here .
And I cant upload attachment there I dont know why .

tommyvca said:
I flash your file using odin but problem still was here .
And I cant upload attachment there I dont know why .
Click to expand...
Click to collapse
yayy we are 2 now with the same problem :victory:

wareca said:
yayy we are 2 now with the same problem :victory:
Click to expand...
Click to collapse
YES .We all want to solve this right ?

tommyvca said:
YES .We all want to solve this right ?
Click to expand...
Click to collapse
u need to flash 8190n pit. i cant find 8190l pit file

tommyvca said:
YES .We all want to solve this right ?
Click to expand...
Click to collapse
Thank you . I solved my problem now and my IMEI is restored .
Also I want to know is there any recovery apps or software can recover my whatsapp conversation , document and image etc ?
Can you tell me the name ? By the way , thank you .

Related

please HELP my i9001 is bricked !!!

Hi Guys,
I tried to upgrade rom from 2.3.3 to 2.3.6 got on this forum , using odin 4.43
the port was reconized and the process started but stay locked at 4/12 during 1 hour
so that I had to stop odin and shut down my i9001 from downloading mode .
now when restarting device I get icon showing a phone and a pc with yellow triangle and exclamation point in it .
Please help, what ca I do?
I made a full data+system backup using titanium on my sd card before stating the operation, could it be used ?
thanks in advance !!
Eric
Can you acces download mode? If you can, just try again with odin..
Hi,
You mean it is possible to get dowload mode , even if I got thei triangle pc phone logo ?
You should be able to get into download mode. Get the battery out of your phone and put it back after 10sec, Volume Down + Home + Power Button at the same time will get you in download mode.
It happens a lot that the flash is stuck, especially with large files. Changing USB or PC even will solve the problem.
thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !
ericcostes said:
thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !
Click to expand...
Click to collapse
That is fine, MD5 means "one package", so be sure to check One Package and then your .MD5 along with the .OPS and you're good to go. No need for other files.
Thanks Guys !
I could flash my phone with odin 4.43 and 2.3.6 rom .
but the only way to success after many sessions, was to uncheck box " secure OPS file" on odin screen .
thanks a lot
Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???
mr_guitar_eg said:
Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???
Click to expand...
Click to collapse
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!
Jaafar U.K. said:
when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!
Click to expand...
Click to collapse
That's for softbricks only, not really a brick (just something that makes people panic and think they bricked their phone ). Hardbricks are almost impossible as in: go to a service center and hope they will replace or fix your device (without any cost)...

[Q] Samsung Galaxy s stuck in loop with Ultimate rom ?

Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck
guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?
Please help im stuck need step by step advice still a real novice ???
charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.
Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...
Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can

my galaxy mini 2 doesn't work after chainfire 3d

Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.
orome2 said:
Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.
Click to expand...
Click to collapse
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...
haridevil99 said:
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...
Click to expand...
Click to collapse
i can't open recovery mod. and i can't find stock rom for mini 2. When i prees long power buton my phone doesn't turn off. Still restarting. Please help me guys
Dont worry. Pull battery for 10sec and see if you can enter download mode. check this for your stock rom. This will do for now. You can later search for your region or flash a custom rom.
http://www.samsungroms.com/firmware...00-gingerbread-2-3-6-s6500ailk1-italy-tim-rom
Let me know if it does..
didn't work again. Thank you for your helps but still same problem (sorry for bad English ) I can't reach recovery mod and my phone still restartings on samsung logo. Another solution for that problem? Please help me.
Remove the battery....and put it
Now go to recovery mode....and install a rom.....once I also face this problem
Samsung Galaxy Y-Jellyblast
i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.
orome2 said:
i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.
Click to expand...
Click to collapse
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..
me too
me too
haridevil99 said:
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..
Click to expand...
Click to collapse
i did it. But same problem still. Can i format my phone without recovery mod?
orome2 said:
i did it. But same problem still. Can i format my phone without recovery mod?
Click to expand...
Click to collapse
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.
haridevil99 said:
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.
Click to expand...
Click to collapse
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?
orome2 said:
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?
Click to expand...
Click to collapse
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1
haridevil99 said:
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1
Click to expand...
Click to collapse
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close
orome2 said:
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close
Click to expand...
Click to collapse
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html
haridevil99 said:
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html
Click to expand...
Click to collapse
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center
orome2 said:
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center
Click to expand...
Click to collapse
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..
haridevil99 said:
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..
Click to expand...
Click to collapse
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?
orome2 said:
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?
Click to expand...
Click to collapse
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.
haridevil99 said:
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.
Click to expand...
Click to collapse
ohh. Whatever. I mut go repair. I trierd a lot of ways but didn't work. I bored. Thank you for your helps.

[Q] phone not turning on

im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
srikanth_gadde said:
im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
Click to expand...
Click to collapse
You put questions on 100 places, I asked you something one one of them and told that I9070 firmware will brick I9070P phone, or I9070P firmware will brick I9070 phone.
srikanth_gadde said:
im trying to downgrade from JB to GB
i did all the steps correctly and phone booted
im from india so i have 16 gb version so i put the PIT file of 16 gb and again i downloaded some other country firmware and and flash both in odin
it shows me pass in my odin and after that phone is not turned on im trying to go to download mode but nothing happen
phone is just blank and i tried to charge my phone but nothing is happening
help me anybody face these issue????
Click to expand...
Click to collapse
Yeah, u should be remove this thread first. Back to the thread where your issue that has been discussed before.
yes your phone is now bricked !
get some good explanation and visit service center but do not tell them that u were upgrading the firmware manually!
Droids king said:
yes your phone is now bricked !
get some good explanation and visit service center but do not tell them that u were upgrading the firmware manually!
Click to expand...
Click to collapse
unfortunately my warranty period is over
should i go to service center or any alternate to get my phone back???
ur from india ryt? how much it will cost??
srikanth_gadde said:
unfortunately my warranty period is over
should i go to service center or any alternate to get my phone back???
ur from india ryt? how much it will cost??
Click to expand...
Click to collapse
ask them about the cost of recovering. if they r taking too much , then get it repired from outside\1
Droids king said:
ask them about the cost of recovering. if they r taking too much , then get it repired from outside\1
Click to expand...
Click to collapse
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
Pull out battery - put it back in, and retry to go in download mod.
srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
after following shut down's method try to reflash with correct firmware ! you may be lucky enough to recover ur device ! :highfive:
Droids king said:
after following shut down's method try to reflash with correct firmware ! you may be lucky enough to recover ur device ! :highfive:
Click to expand...
Click to collapse
i tried to go to download mode as shut down says
but i cant no sign of life in my phone @shut_down
srikanth_gadde said:
i tried to go to download mode as shut down says
but i cant no sign of life in my phone @shut_down
Click to expand...
Click to collapse
have u tried to flash firmware ?
Droids king said:
have u tried to flash firmware ?
Click to expand...
Click to collapse
how can i flash ?? without download mode
and odin is not detecting my phone when i try the three key combination with usb to my pc
srikanth_gadde said:
hey one progress i think
i connected my phone to usb and pressed the vol dwn+home+power button then my pc sounds and installed some drivers but nothing happen after that
Click to expand...
Click to collapse
then what is this?
if u r unable to do so then get it repaired it would cost u about 1000-1500 inr

[Q] Gt-I8190 partitionning lost. Please HELP

Hi guys, newbie here trying not to brick my s3 mini any more than it is.
It all started with the lack of mobile signal, so i changed the sim card-didn't work
After a hard reset it got worse, as i got a black popup on my screen :
PDA: I8190XXAMG4
Phone : XXXX
CSC : NONE
H/W : Not Active
EF Cal Date : NONE
SMD : 01N, PBA : 04N
CAMERA : N/A, FrontCam : N/A
TSP : 0X11
TSK : 0x19
Band : GPRS, CH : N/A
UART : N/A, USB : N/A
Also, the phone will not go in recovery mode anymore, only on download mode.
I tried flashing a stock firmware with Odin, but no change. The thing is, after the phone restarts, it loses any settings i made (like wireless password, google account, etc), so if i check USB in debugging mode, after restart it will be unchecked again, so for that reason i'm not sure if the reflashing worked.
In download mode it says:
custom binary download: no
current binary:Samsung official
system status: official
At the bottom of the page: HW REV: 0x5
As far as I understand after reading the forum for about 8 hours, i've lost the partitioning of the device.
If any of you has any idea what i could do, please advise.
there are a few threads on how to fix your problem
some more reading involved
efaustino84 said:
there are a few threads on how to fix your problem
some more reading involved
Click to expand...
Click to collapse
Can you please be more specific?
i"ve been looking through the topics and couldn't find anything.
Getting a bit desperate here...bought the phone a couple of weeks ago and i don't really afford another one
Can anyone please help me?:crying:
kstk said:
Can anyone please help me?:crying:
Click to expand...
Click to collapse
refer to the threads on loading stock ROM using ODIN
those will provide you with the information to repair the phone in it's current state
you will then be able to fix the partition
Ok. So I tried numerous times to upload the stock software but absolutely nothing happens, even if ODIN says that the upload was successful. As soon as the phone restarts, it loses any settings i had done, including USB debugging mode, so maybe this is why it doesn't work. I tried selecting a CSC, but after restart it's still:''none''.
The thing is that wireless is working, so i can connect to internet, but i cannot download and install anything (no space). I will try and download an emulator via PC and put it on a memory card.
Of course, it won't read my memory card :|
kstk said:
Of course, it won't read my memory card :|
Click to expand...
Click to collapse
post a screen shot of the options you have enabled when loading via odin
efaustino84 said:
post a screen shot of the options you have enabled when loading via odin
Click to expand...
Click to collapse
here it is
kstk said:
here it is
Click to expand...
Click to collapse
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
I even tried with a pit file and re-partition checked. No result.
Just flashed again with Odin started as admin. No change.
kstk said:
Just flashed again with Odin started as admin. No change.
Click to expand...
Click to collapse
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
JackoMJ said:
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
Click to expand...
Click to collapse
Just tried that, it didn't work. It's like i didn't do anything at all.
I just can't write anything on this thing
Anyway, thank you very much, guys. Any more ideas are welcome :
Was i supposed to have F. reset time checked as well?
JackoMJ said:
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
Click to expand...
Click to collapse
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
efaustino84 said:
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
Click to expand...
Click to collapse
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
kstk said:
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
Click to expand...
Click to collapse
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
tys0n said:
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
It is booting normally, but it takes very long to boot.
kstk said:
It is booting normally, but it takes very long to boot.
Click to expand...
Click to collapse
You still got that FactoryApp popup on screen?
Are you rooted?
Can you enter recovery? If so, what recovery do you have?

Categories

Resources