Related
Installed cyanogen 6.1 on a G1 I just acquired at no cost but now can't setup my "google account" errors out about not being able to find reliable data network.
Initially I had wiped the phone with the stock ROM and was able to do the initial sign-up of the google account and tested the android market without much of a problem.
After alot of reading, root and learning about Android via a crash course. I was able to sucessfully install cyanogen 6.1 but now I can't setup the phone.
I thought that my trial and error method of getting things working may have caused the problem so I did a complete wipe and started from scratch (minus the error) once more to make sure everything was good. But still no go on setting the google account.
Yes, I do have a dataplan as I was using an HTC TouchPro2 before this.
Any ideas?
SPL: HDBOOT - 1.33.0013d
Radio: 2.22.28.25
ROM: update-cm-6.1.0-DS-2708port_S, gapps-mdpi-tiny20101020-signed.
At the Google Sign-in screen, hit menu, APN, enter your APN.
There should be a skip option on CM anyway.
APN looks correct. I'm able to skip the sign-up but I can't access anything that requires net access. No android market; no browser...nothing.
Did you flash gapps after flashing the rom? Not all roms come pre-installed with gapps.
Sent from my HTC Dream using XDA App
Yes, I installed gapps-mdpi-tiny20101020-signed
dump a logcat using adb during boot process perhaps?
or try checking the SIM with another phone. similar thing happened to me once-upon-a-time, and apparently it was the SIM and not the phone *doh*
I had the same problem but when i reboot the phone the problem is solved for some time ( 1 a 2 hours) so i have to reboot my phone a lot.
im having the same problem with cm6. i have tried going to biffmod and get the same problem and data is turmed on.
Yep, tried another mod same issue; also went as far as to unroot it and problem still exists.
Does anyone know if the Radio firmware could be the potential culprit?
SIM card works fine on my HTC TouchPro2...running android
Try a diff radio perhaps, not sure if thats the issue.
It has got to be the APN... Do you get a G/E/3G icon?
Just wanted to updated that I have now been able to successfully get CM 6.1.0 working on the G1. Seems that it all came together once I received my G2 and my data plan was changed.
Yay!!
I just updated to CM 10 RC1 over-the-air from CyanogenMod on my Sprint HTC One a few days ago (when it was released). I went to update to the newest nightly today, but cancelled the download midway because my WiFi speeds were way too slow and the download was draining my battery too fast. Now, my phone is stuck on "Searching for Service", and I can't figure out how to get it to get signal again, because I AM in an area with very good signal. Any ideas? I need my phone working ASAP!
I've tried rebooting, as well. No luck. Also tried restoring an older Nandroid - still no luck.
mrinehart93 said:
I just updated to CM 10 RC1 over-the-air from CyanogenMod on my Sprint HTC One a few days ago (when it was released). I went to update to the newest nightly today, but cancelled the download midway because my WiFi speeds were way too slow and the download was draining my battery too fast. Now, my phone is stuck on "Searching for Service", and I can't figure out how to get it to get signal again, because I AM in an area with very good signal. Any ideas? I need my phone working ASAP!
I've tried rebooting, as well. No luck. Also tried restoring an older Nandroid - still no luck.
Click to expand...
Click to collapse
Did you lose the ability to make and place calls? And do data and texting still work?
Sent from my XT897 using Tapatalk 2
Get back into a sense ROM and in the dialer ##72786#
Go to network settings change it to cmda/evdo let it get service and change it back.please note u have to do it every time
Sent from my One using XDA Premium HD app
pbedard said:
Go to network settings change it to cmda/evdo let it get service and change it back.please note u have to do it every time
Sent from my One using XDA Premium HD app
Click to expand...
Click to collapse
This worked perfectly! Thanks a bunch!
I am also having the same problem. After flashing the latest release candidate. I lost my service and my mobile network state says disconnected now. I've tried everything so far no luck. I've gone back into my original stock nandroid and nothing. No matter what I flash to, phone has no service.
Change the network mode once after reboot otherwise you get no service at all...T_T
sent from my Sprint ONE
j_rivers said:
Change the network mode once after reboot otherwise you get no service at all...T_T
sent from my Sprint ONE
Click to expand...
Click to collapse
did so. I did not get any data whatsoever
Jaye1789 said:
did so. I did not get any data whatsoever
Click to expand...
Click to collapse
You also need to change the CDMA subscription if you're using a simcard.
sent from my m7spr using tapatalk 4
I have this same issue with the RC1 and have been changing the network mode to get service as well. After that the phone is fine. Does anyone know what causes this or if there's any way to resolve it or if that is purely on CM's end? When using the previous 10.1 nightlies (specifically 8/7/13) I don't have this problem, but when moving to this RC and the 10.2 nightlies (september 5) I still have the issue despite a full wipe (data, system...) before flashing each ROM. Don't have this issue with sense-based roms though.
Vember31 said:
I have this same issue with the RC1 and have been changing the network mode to get service as well. After that the phone is fine. Does anyone know what causes this or if there's any way to resolve it or if that is purely on CM's end? When using the previous 10.1 nightlies (specifically 8/7/13) I don't have this problem, but when moving to this RC and the 10.2 nightlies (september 5) I still have the issue despite a full wipe (data, system...) before flashing each ROM. Don't have this issue with sense-based roms though.
Click to expand...
Click to collapse
Hey guys I found a permanent fix for this. Check this link out: http://forum.xda-developers.com/showpost.php?p=45127419&postcount=942
mrinehart93 said:
Hey guys I found a permanent fix for this. Check this link out: http://forum.xda-developers.com/showpost.php?p=45127419&postcount=942
Click to expand...
Click to collapse
thanks so much!!! :good: this worked for me. just a heads up though - I accidentally tried this with the cm10.2 nightlies first (despite the fact that this problem exists with those nightlies too) and it ended up causing an error (com.android something continuously popping up...) but this fixed the signal problem after restart with the 10.1.3 RC2 rom.
much appreciated!
I'm having an issue with my HTC One. I had been on Paranoid Android, working fine for several weeks (so I didn't flash the wrong version for my Sprint hardware). Last week, I was suddenly showing roaming, with an empty triangle for the signal bars. I tried messing with the RUM/SIM/NV settings, but it didn't resolve the issue. I ended up reflashing back to stock 1.29 via the RUU, but still showed an 'x' next to my signal bars. I then let it update to 1.31 (damn...) but that didn't solve the issue either. If I go into the Network info under About phone, I show 0 signal strength if LTE is disabled. If I enable LTE, then I get signal, and data. Only CDMA is not working.
If I go into the MSL menu (##<MSL>#), it shows 'No' for both MDN and MSID. If I try to enter them, I get a message "Commit Failed" when I try to save them.
Support at the Sprint store wouldn't even look at it because the bootloader was unlocked.
Has anyone had issues with the CDMA radio failing? Anything else to try?
beanpoppa said:
I'm having an issue with my HTC One. I had been on Paranoid Android, working fine for several weeks (so I didn't flash the wrong version for my Sprint hardware). Last week, I was suddenly showing roaming, with an empty triangle for the signal bars. I tried messing with the RUM/SIM/NV settings, but it didn't resolve the issue. I ended up reflashing back to stock 1.29 via the RUU, but still showed an 'x' next to my signal bars. I then let it update to 1.31 (damn...) but that didn't solve the issue either. If I go into the Network info under About phone, I show 0 signal strength if LTE is disabled. If I enable LTE, then I get signal, and data. Only CDMA is not working.
If I go into the MSL menu (##<MSL>#), it shows 'No' for both MDN and MSID. If I try to enter them, I get a message "Commit Failed" when I try to save them.
Support at the Sprint store wouldn't even look at it because the bootloader was unlocked.
Has anyone had issues with the CDMA radio failing? Anything else to try?
Click to expand...
Click to collapse
I would take it back to another Sprint store. They are suppose to take your phone and run the RUU. There was a posting from a Sprint employee a few weeks back with the internal company policy - which was to do a reset or run the RUU to put the phone back to stock to determine if it is a software or hardware issue. If hardware issue, Sprint is suppose to then replace the phone.
All androir 4.3 based rom have some data or signal issues with cdma ... I just go back to 4.2, everything is fine. If you have a signal issue with stock rom you should ask for a hardware replacement.
sent from my m7spr using tapatalk 4
I've never had a 4.3 ROM on this phone. Was on a 4.2 AOSP ROM, and now I'm back on HTC One 1.29 (after upgrading to 1.31, and then RUU'ing back to 1.29 again). No CDMA reception on anything. I'll try another Sprint store. The guy at the one I went to was pretty pompous. He asked if the phone had been rooted. I figured honesty would be best, since he would know that the bootloader had been unlocked as soon as he went into HBoot.
j_rivers said:
All androir 4.3 based rom have some data or signal issues with cdma ... I just go back to 4.2, everything is fine. If you have a signal issue with stock rom you should ask for a hardware replacement.
sent from my m7spr using tapatalk 4
Click to expand...
Click to collapse
beanpoppa said:
I've never had a 4.3 ROM on this phone. Was on a 4.2 AOSP ROM, and now I'm back on HTC One 1.29 (after upgrading to 1.31, and then RUU'ing back to 1.29 again). No CDMA reception on anything. I'll try another Sprint store. The guy at the one I went to was pretty pompous. He asked if the phone had been rooted. I figured honesty would be best, since he would know that the bootloader had been unlocked as soon as he went into HBoot.
Click to expand...
Click to collapse
Try changing the mobile network mode to something else in the setting page, then change it back, sometimes it works ...
sent from my m7spr using tapatalk 4
Airplane mode on and then off. This fixes the issue.
Sent from my HTCONE using xda app-developers app
Issue solved
Closing the loop. I found the issue. I must have somehow changed from NV to RUIM/SIM in the Mobile Subscription settings while on a CM based ROM. When I reflashed to stock using the 1.29 (and then 1.31) stock RUU, it doesn't change this setting in the radio. And then there is no access to this setting to correct it in the stock ROM (as far as I could find... maybe there's a hidden ## option). To fix the issue, I had to reflash back to a CM based ROM so that I could access the mobile subscription settings, change it back to NV, and then reflash back to stock and let it do the Handsfree activation. After that, everything is working again.
beanpoppa said:
Closing the loop. I found the issue. I must have somehow changed from NV to RUIM/SIM in the Mobile Subscription settings while on a CM based ROM. When I reflashed to stock using the 1.29 (and then 1.31) stock RUU, it doesn't change this setting in the radio. And then there is no access to this setting to correct it in the stock ROM (as far as I could find... maybe there's a hidden ## option). To fix the issue, I had to reflash back to a CM based ROM so that I could access the mobile subscription settings, change it back to NV, and then reflash back to stock and let it do the Handsfree activation. After that, everything is working again.
Click to expand...
Click to collapse
Would you be able to walk me through that process? I am having the same issue. Where would I find those settings after flashing over to a CM based ROM?
edit: NM Pretty easy to find on a CM based ROM.
Hey guys, since switching to the 4.3 roms my voicemail has not been working. If I leave a vm from my work phone it never reaches my actual phone or shows up in VVM. Even when I try to dial 1 and connect to my vm normally, it says that is an incorrect number.
Is there something I need to do to re-associate my vm number to my phone?
indiscriminant said:
Hey guys, since switching to the 4.3 roms my voicemail has not been working. If I leave a vm from my work phone it never reaches my actual phone or shows up in VVM. Even when I try to dial 1 and connect to my vm normally, it says that is an incorrect number.
Is there something I need to do to re-associate my vm number to my phone?
Click to expand...
Click to collapse
If for some reason even dialing your voicemail manually doesn't work, it sounds like there is a provisioning issue on your device, so you could try something. First try updating you profile: go to settings, system updates -all the way at the bottom-, and tap on update profile. If that doesn't work, I assume the option activate device doesn't work either since its a custom rom. So if that doesnt work, then try flashing the stock RUU, and run activate device, this will force your device to re download all the provisioning data for your account. Let me know if either of those methods works.
matinm90 said:
If for some reason even dialing your voicemail manually doesn't work, it sounds like there is a provisioning issue on your device, so you could try something. First try updating you profile: go to settings, system updates -all the way at the bottom-, and tap on update profile. If that doesn't work, I assume the option activate device doesn't work either since its a custom rom. So if that doesnt work, then try flashing the stock RUU, and run activate device, this will force your device to re download all the provisioning data for your account. Let me know if either of those methods works.
Click to expand...
Click to collapse
When I try to update my prl it says "Unfortunately vDM Client has stopped." and the Activate is there but when doing it the message says "Sorry we experience a system problem during your task. Please dial *2 for psrint customer care."
The phone works in every other capacity fine.
indiscriminant said:
When I try to update my prl it says "Unfortunately vDM Client has stopped." and the Activate is there but when doing it the message says "Sorry we experience a system problem during your task. Please dial *2 for psrint customer care."
The phone works in every other capacity fine.
Click to expand...
Click to collapse
What rom are you using? you could try flashing the stock rooted rom and then try doing that:
http://forum.xda-developers.com/showthread.php?t=2467607
Look at the second post for the stock rooted deodexed rom. Flash that, it has no modifications other than being rooted and deodexed. When you flash it then try running activate device. Let me know what happens
matinm90 said:
What rom are you using? you could try flashing the stock rooted rom and then try doing that:
http://forum.xda-developers.com/showthread.php?t=2467607
Look at the second post for the stock rooted deodexed rom. Flash that, it has no modifications other than being rooted and deodexed. When you flash it then try running activate device. Let me know what happens
Click to expand...
Click to collapse
The first one I flashed was Venom, but it had some stability issues so I have swapped to Stock w/ Goodies earlier today. I will try to flash the complete stock later today. Is this like the old issues on the LTE Evo with provisioning where we had to occasionally call Sprint to do it?
Honestly i have no idea. And i doubt it. I cant see why you would need to call sprint. See when you activste your device it downloads everything necessary for provisioning so unless your phone is doing something wacky i doubt activating the device will fail. So yeah just flash the full stock rom and reactivate. It should work.
Sent from my HTCONE using Tapatalk
matinm90 said:
Honestly i have no idea. And i doubt it. I cant see why you would need to call sprint. See when you activste your device it downloads everything necessary for provisioning so unless your phone is doing something wacky i doubt activating the device will fail. So yeah just flash the full stock rom and reactivate. It should work.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
This did end up having to be resolved by Sprint, called into their support and they had to remove, refresh, and reapply my voicemail. Took about 5 minutes and everything worked again and all of my voicemailes I had missed showed up as well.
indiscriminant said:
This did end up having to be resolved by Sprint, called into their support and they had to remove, refresh, and reapply my voicemail. Took about 5 minutes and everything worked again and all of my voicemailes I had missed showed up as well.
Click to expand...
Click to collapse
For future reference you can also try this. If you send a blank voice mail to [email protected] through the VVM app it will usually fix the problem. Had to do this on a friends phone the other day.
i unlocked my sprint htc m8 by changing the cid to 11111111. after that network appeared in the phone, but i could only make outgoing calls, no incoming calls were shown on the phone, so i decided to root the phone thinking maybe it would solve the issue, so first i tried installing the ARHD rom, which was not made for sprint, so then i tried the nusenseven rom, after installing the rom there was no network in the phone , it was always searching for network , and i couldn't even search network manually as those options were greyed as it was only searching for network, but i was able to receive incoming calls on the phone without network , but coudn't make outgoing calls due to no network, same issue happened in the skydragon rom,
anybody help me out to solve the issue please.
Have you tried ##72786# or ##786#(if you have msl code)
And press reset at top right
I am having the same or similar issue. Since installing skydragon I have a constant message in my notifications saying that it's "unable to establish a wireless data connection". No problem with wifi.
EVOuser94 said:
Have you tried ##72786# or ##786#(if you have msl code)
And press reset at top right
Click to expand...
Click to collapse
after pressing the above codes nothing appeared, where to press reset
Sounds like your missing EPST options, that's odd, can you flash Stock Rooted ROM and do that code.
If you flashed a rom that was not Sprint compatible (ARHD is not as far as I know) you messed up the partitions and the only way I know of to fix it is to RUU and start fresh.
ok, i again started again with stock and then a compatible rom with htc m8 sprint that is skydragon, still the phone has no network but i'm able to receive call, i don't know how.
in stock rom i was getting network with no incoming calls.
404fnf said:
ok, i again started again with stock and then a compatible rom with htc m8 sprint that is skydragon, still the phone has no network but i'm able to receive call, i don't know how.
in stock rom i was getting network with no incoming calls.
Click to expand...
Click to collapse
Did you RUU?
If not it's not going to fix you issue.
Sloth said:
Did you RUU?
If not it's not going to fix you issue.
Click to expand...
Click to collapse
yes i did the ruu.,,, actually the problem was different, later after flashing i realized that the sim unlock method only works till lollipop, and i was trying with the marshmallow, so problem solved now,
thanks for the help
now the only problem i'm getting is that mobile data is not working,