Database Develop

Difficulties starting after ROM Upgrade

I could use some help. During my rom upgrade to stock JMK/JMA/JM5 with Odin my laptop hung.
I have tried the following recovery:
IF your Tab does not boot after flashing the kernel and hangs at the Samsung Galaxy Tab screen, you must follow the following procedure
Get a stock rom package (any of Rotohammer's firmwares will work)
Get P1_add_hidden.zip attached to this post and extract the P1_add_hidden.pit file (http://forum.xda-developers.com/atta...4&d=1299767473)
Using Odin 1.7, put stock rom (Roto-JME-Full-v4.tar for example) in PDA slot.
Put P1_add_hidden.pit in Pit slot
Check repartition box
Put Tab in download mode by holding Volume Down and Power, connect to the computer, and press start.
After this, the Tab will reboot normally.
After doing this the Tab still does not pass the Samsung Galaxy Tab Screen. Any ideas please how to proceed from here.
Tab is European GSM tab, was rooted with the protected bootloader removed.

Try dividing the steps. Flash the pit file first alone in odin. Then close ODIN flash the ROM thereafter. Also you might want to try the JMI ROM as well.

Will try that. Does the battery keep charged or does it charge even in galaxy tab screen?

Getting a bit nervous here. Flashing in parts or using JMI does not work. The Tab is still not getting past the Galaxy Tab screen. Pit flash with Odin 3 1.7 is successful, JMI Rom Flash is also successful...
What now???????
Any help is appreciated

Be sure to put the right files in the right slots in Odin
you can also use ADB to get to different boot modes like Download mode
Code:
adb reboot recovery
Code:
adb reboot download
You should be able to use ADB from the Samsung screen

Hope you resolve your issue dude but for future reference...
Galaxy Tab Android Development = For Posting of Development Projects/tuts/ref
Galaxy Tab General = General Discussion about Galaxy Tab/Android
Galaxy Tab Q&A = For asking questions.

You've got a PM

[Q] Help ! My tab p1000 hangs on samsung logo

For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:

You should flash your tab and install a new firmware that's the only solution

omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?

dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...

Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App

to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..

Oké gona try it when i get home
Sent from my X10i using XDA App

jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App

thx for all the help. took me couple of hours but got it running again on andriod 2.3.3

MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i

Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.

Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.

I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.

copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2

Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance

I doubt you will ever get Kies to work with custom ICS rom in your tab.

priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?

who knows Samsung has catch up, then I will be caught out.

kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.

[Q] my samsung galaxy pop plus is not detecting in odin mode

i'm trying to install clockwork mode in to my samsung galaxy pop plus . .
but my phone is not detecting in odin mode
please help me to fix ma problem

abzzy.shox said:
i'm trying to install clockwork mode in to my samsung galaxy pop plus . .
but my phone is not detecting in odin mode
please help me to fix ma problem
Click to expand...
Click to collapse
Do you have your phone restarted in download mode? (turn your phone off and restart it by holding volume down, home and power button at the same time)
Do you have the Samsung drivers installed? (i can't post links yet but if you search for "Samsung Galaxy Mini USB drivers" on Google you'll find it, if you don't, just download Kies, the drivers are included)

maybe because it's a different handset?

lonestrider said:
maybe because it's a different handset?
Click to expand...
Click to collapse
It really isn't, it's the same S5570 with a Qualcomm MSM 7227 as the Mini.
Same everything else too.
Even if it wasn't, Odin wouldn't care, it'd detect it anyway. Odin will let you flash anything even remotely compatible, that is why you have to be careful about what you flash, you will get no warnings and you can mess up and brick your phone.
I just restored a Mini flashed to a Fit rom using Odin for both the mistake and the fix.

If you use cwm of galaxy mini on galaxy mini plus it may brick your phone..as both are different...
Swyped from my first Android device....!

- Make sure you have kies or samsung usb driver
- Make sure your usb cable is working
- Make sure your usb port is not damaged (working)
- Make sure your odin is virus-free
- Open odin
- Boot your device to download mode ( volume key down + home + power key )
- Connect to your PC
That should do it...
Hope it helped...
Sent from my GT-S5570 using xda premium

Naaa.. it doesn't help a bit .. the real problem is, odin cannot detect the phone, alredy installed all the driver, test the cable, test the connection .. you name it everything, still not success... Or, maybe odin did not support Galaxy Pop Plus ? ( S5570i )

i wish it'll help !!
Download this program to your PC and install it then open Odin and connect your mobile via usb--->>I wish it'll help!!!: rolleyes:

tulun said:
Naaa.. it doesn't help a bit .. the real problem is, odin cannot detect the phone, alredy installed all the driver, test the cable, test the connection .. you name it everything, still not success... Or, maybe odin did not support Galaxy Pop Plus ? ( S5570i )
Click to expand...
Click to collapse
So, you actually have the yellow triangle and the yellow text below it that says "downloading..." and when connected to your PC you get a notification of how it's connected but Odin won't recognize it?
Well, that's just not possible, it really isn't possible.
Just get some WD40 into the connector, retry and you should be fine, yes my friends, sometimes the best solution is in the garage.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
ujnikm said:
Download this program to your PC and install it then open Odin and connect your mobile via usb--->>I wish it'll help!!!: rolleyes:
Click to expand...
Click to collapse
That program is awesome!
I assume you meant to send the samsung drivers, i'd search for them and repost the link but i'm not the one with the problem.
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
tulun said:
Naaa.. it doesn't help a bit .. the real problem is, odin cannot detect the phone, alredy installed all the driver, test the cable, test the connection .. you name it everything, still not success... Or, maybe odin did not support Galaxy Pop Plus ? ( S5570i )
Click to expand...
Click to collapse
Odin most definetly supports galaxy pop plus, it's the same as any mini but with a newer core, the rest is absolutely the exact same, i have even reviewed the chip codings.
If Odin doesn't recognize it, Kies won't either because both use the exact same method, Odin being a leaked Samsung application and all.
Try better when you're trolling, because this is just daft.

The Galaxy Pop Plus sports 832MHz over 600mhz
Thanks, A Still Small Voice Of GRATITUDE

abzzy.shox said:
i'm trying to install clockwork mode in to my samsung galaxy pop plus . .
but my phone is not detecting in odin mode
please help me to fix ma problem
Click to expand...
Click to collapse
Download kies worked for me

install rom manager then choose flash CWM

xenv1 said:
install rom manager then choose flash CWM
Click to expand...
Click to collapse
hope it won't brick the phone just like a lot of people with minis who brick their's coz of ROM manager..

No CWM
Actually, there is no permanent CWM in galaxy pop plus or sgy which you can flash through odin.
Instead, you can root it and flash temporary CWM from stock recovery. If you want permanent CWM, flash a kernel which has it built in like cyanus.
Link to cyanus kernel: http://forum.xda-developers.com/showthread.php?t=2110367

Pop plus not similar to mini
The galaxy pop plus is not similar in hardware to galaxy mini. It is more similar to galaxy y s5360 in hardware except for camera quality. sgy roms work for pop plus, but galaxy mini roms brick pop plus

GT-S5570I Soft Brick

Hi guys. I know this is my first post and thread, but I used Google and searched in this forum for hours and I can't find a solution.
My device is a SGM GT-S5570I, it had gingerbread 2.3.6.
It was rooted with a universal root I found at this forum.
Right after that, I downloaded this: cm_tass-galaxyics-10062012 from galaxyics.com, I think it's CyanogenMod for S5570 (NOT COMPATIBLE!)
I started in normal Recovery mode and updated from sd card that file.
The problem is that I did not make a recovery and I didn't install ClockWorKRecovery, and now the phone always boots in Recovery mode, popping up an error: Can't find /system.
I think I soft-bricked it, right? Is there a way to fix it without a recovery? ODIN does not detect it, I installed both a manual version of the drivers (installation shows an error during proccess) and Samsung Kies, and none of them makes the PC detect the device.
Also I found it impossible to find firmware for S5570I (I find lots of firmwares and stuff for S5570, but I'm sure it won't work.)
Another thing I'd like to say is that I watched lots of videos at youtube of galaxy mini's and they show a different image at the boot than mine, they have something like "Galaxy pop/plus" and mine just shows "Galaxy Mini GTS5570I".
I can provide more info if asked, just don't know what more to say.
Thank you for your time, and excuse me for my annoying English!

Restore to stock firmware .
Download the it from samfirmware and use odin3 v1.85
Sent from my GT-S5570I Samsung Galaxy Pop Minus (LOL) using xda

dbtvillanueva said:
Restore to stock firmware .
Download the it from samfirmware and use odin3 v1.85
Sent from my GT-S5570I Samsung Galaxy Pop Minus (LOL) using xda
Click to expand...
Click to collapse
+1 ....

White screen after flash...Please help!

I just tried flashing "B7510" firmware for galaxy pro to my galaxy mini using Odin...
After this...
My phone give me only white screen.:crying:
I hear samsung start music...
Then I connect the phone to my computer... It is detect it as Samsung Galaxy Pro.:crying:
I tried to enter to download mode but.. I can't. And odin isn't detect it.
Please help me
Sorry to my english.

NO any one can help me

مرحبا علي خليل
Get it to Samsung service
Sent from my GT-S5570 using xda premium

Do you flash other phone ROM to Galaxy Mini ?
If yes, then give it to Samsung. You're hopeless.

Did you try Samsung Galaxy Pro usb drivers and odin.

One does not simply flash Galaxy Pro firmware onto Galaxy Mini.
These kinds of firmware are not like ROMs. ROMs can be flashed on similar devices; firmware is device-specific.
One last-ditch method to get into download mode is this:
1.Take out everything in your phone (battery, SIM card, SD card)
2.Hold download mode button combination
3. Insert battery (get someone to help you) and hope that download mode appears
4. Plug it into your computer (preferably with the correct version of Odin and Galaxy MINI drivers and firmware)
5. Flash as per normal
6. Hope it works
The other way is to use USB jig, which I frankly have no idea how to use.
Sent from my CM7 GT-S5570I

Sry, wrong post.