Hi.
I have ROMed i9305 (CM 10.1.3) and my PC doesn't seem to see it in MTP. No problems with PTP tho.
I'm using Windows 7 so I shouldn't have any problems. :c
I installed Samsung's drivers, nothing.
How can I fix it?
Irevall said:
Hi.
I have ROMed i9305 (CM 10.1.3) and my PC doesn't seem to see it in MTP. No problems with PTP tho.
I'm using Windows 7 so I shouldn't have any problems. :c
I installed Samsung's drivers, nothing.
How can I fix it?
Click to expand...
Click to collapse
Ensure that USB debugging is enabled.
1. go to settings -> about phone then click repeatedly on the build number until development settings is unlocked
2. go to settings -> developer options (new menu) and then turn on android debugging (which mentioned usb in the description)
Related
Symptom: When I connect USB cable in my phone, no change in system / phone. Phone is charging, but I am not seeing any notification to enable USB debugging / mounting etc.
I'm running slimbean in my cappy and I recently updated to slimbean 3.1. USB mounting worked perfectly in Slimbean 2.9, not sure if this has anything to do with the ROM upgrade.
Under settings following options are enabled
Settings -> Developer Options -> Android debugging (Enabled)
Settings -> Developer Options -> USB debugging notify (Enabled)
When I go to "Setings -> More -> Tethering", I see USB not connected
Any help to identify the root cause will be much appreciated. Do I need to enable any other settings? Is this a ROM or Kernel or Hardware issue?
Thanks
uthavaakkarai said:
Symptom: When I connect USB cable in my phone, no change in system / phone. Phone is charging, but I am not seeing any notification to enable USB debugging / mounting etc.
I'm running slimbean in my cappy and I recently updated to slimbean 3.1. USB mounting worked perfectly in Slimbean 2.9, not sure if this has anything to do with the ROM upgrade.
Under settings following options are enabled
Settings -> Developer Options -> Android debugging (Enabled)
Settings -> Developer Options -> USB debugging notify (Enabled)
When I go to "Setings -> More -> Tethering", I see USB not connected
Any help to identify the root cause will be much appreciated. Do I need to enable any other settings? Is this a ROM or Kernel or Hardware issue?
Thanks
Click to expand...
Click to collapse
Have you tried mounting through recovery? Did you change your kernel?
Have you tried a different cable/usb port? Made sure you have the right drivers?
Could be a few things so throwing these out there.
BWolf56 said:
Have you tried mounting through recovery? Did you change your kernel?
Have you tried a different cable/usb port? Made sure you have the right drivers?
Could be a few things so throwing these out there.
Click to expand...
Click to collapse
Or have you enabled fast charge in kernel settings?
Sent from my SGH-I897 using xda app-developers app
BWolf56 said:
Have you tried mounting through recovery? Did you change your kernel?
Have you tried a different cable/usb port? Made sure you have the right drivers?
Could be a few things so throwing these out there.
Click to expand...
Click to collapse
I tried mounting through recovery, but didnt work. Also I tried with two different cables and tried connecting to two different windows 7 machines.
Semaphore kernal is bundled with slimbean, so not sure if my kernel got updated to a newer version as part of slimbean 3.1 installation.
m1batt1 said:
Or have you enabled fast charge in kernel settings?
Click to expand...
Click to collapse
Where do I find this setting?
uthavaakkarai said:
I tried mounting through recovery, but didnt work. Also I tried with two different cables and tried connecting to two different windows 7 machines.
Semaphore kernal is bundled with slimbean, so not sure if my kernel got updated to a newer version as part of slimbean 3.1 installation.
Where do I find this setting?
Click to expand...
Click to collapse
Oh, I heard some people say that had issue with that. Try a different kernel
First you must check your connection with your pc, try in another pc and cable. or usb port.
Thanks every one. Thread http://forum.xda-developers.com/showthread.php?t=2045603 helped me solve the issue.
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
Because developer mode isn't enable,
Setting --->About Phone--->hit build number 7 times.
Settings -->Developer options--->Android Debugging
rock on.
tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
Turn on USB debugging, while connecting your device to system, reboot it without disconnecting. Also if it prompt for RSA key access check always allow this computer and accept it....
Sent from my MB886 using xda app-developers app
No dice
Tried your suggestions, guys. But its still not working.
I tried the 7 clicks. It showed that I have developer access. Then I turned on USB debugging and restarted the phone. No notification about USB debugging, my computer still doesn't detect it.
tanos0415 said:
Tried your suggestions, guys. But its still not working.
I tried the 7 clicks. It showed that I have developer access. Then I turned on USB debugging and restarted the phone. No notification about USB debugging, my computer still doesn't detect it.
Click to expand...
Click to collapse
No adb/debgging is normal on the custom roms. Haven't had adb in at least 2 weeks.
skeevydude said:
No adb/debgging is normal on the custom roms. Haven't had adb in at least 2 weeks.
Click to expand...
Click to collapse
Too bad. Does that mean that I can't use MTP mode?
tanos0415 said:
Too bad. Does that mean that I can't use MTP mode?
Click to expand...
Click to collapse
Can you give details as to what computer/os you are running?
Does it charges when you plug the phone into the computer?
With or without developer mode enabled, your computer should still respond to the phone. If it doesn't then the problem is the computer.
hungrymr2 said:
Can you give details as to what computer/os you are running?
Does it charges when you plug the phone into the computer?
With or without developer mode enabled, your computer should still respond to the phone. If it doesn't then the problem is the computer.
Click to expand...
Click to collapse
Yeah its charging. Drivers tried installing but it says that it was not successfully installed. It also shows as unknown device.
I'm running Windows 7 64bit. It can detect fine back when it was stock. The problem only showed up after I installed PAC rom
The drivers can be corrupted for no good reason try deleting and re-installing.
tanos0415 said:
Too bad. Does that mean that I can't use MTP mode?
Click to expand...
Click to collapse
Can't use MTP or Camera mode (at least on my linux box I can't). All I know is adb doesn't work and that's the only reason I have to plug into usb...I unmount my sd and plug it into my PC to do file transfers (or adb push from recovery)...adb does work in recovery, just not the system.
tanos0415 said:
Yeah its charging. Drivers tried installing but it says that it was not successfully installed. It also shows as unknown device.
I'm running Windows 7 64bit. It can detect fine back when it was stock. The problem only showed up after I installed PAC rom
Click to expand...
Click to collapse
Same things happen on my linux box...problem showed up the same time for me as well....installed a 4.2.2 rom...
//this is a known issue....related to the kernel and usb drivers (started about three weeks ago) Use an earlier, first week of June or so, kernel if you need adb/usb...thought I don't recommend doing that.
frog1982 said:
The drivers can be corrupted for no good reason try deleting and re-installing.
Click to expand...
Click to collapse
+1 try to delete them in safemode to ensure that the old drivers are gone for good.
I did try PAC once and it connected to my win 7 64bit without any issues.
Sent from my MB886 using xda app-developers app
tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
I had this problem.
Step 1: Enter system Settings>Developer options.
Step 2: Tick "Android debugging", "USB debugging notify" (makes it easier to know if connection is successful), and change the "Root acess" setting to "Apps and ADB".
Step 3: Reboot Phone and connect to computer.
This is what I did and I haven't had a problem since. Hope this helps
Blackest Pain said:
I had this problem.
Step 1: Enter system Settings>Developer options.
Step 2: Tick "Android debugging", "USB debugging notify" (makes it easier to know if connection is successful), and change the "Root acess" setting to "Apps and ADB".
Step 3: Reboot Phone and connect to computer.
This is what I did and I haven't had a problem since. Hope this helps
Click to expand...
Click to collapse
already tried that. thanks anyway. :good:
Did you do all that And the restart the computer itself? I think I read that on another android forum (android central maybe?) That that helps sometimes...
Sent from my PACman Atrix HD using XDA Premium
Hi
I just installed a custom lolipop 5.02 using cyanogenmod CM 12 using ODIN to my galaxy s3 mini. and everything went will
after that i tried to connect my s3 to my PC it installs the drivers and it appears in the Device Manager but it does not appear in my computer and it wont connect to kies.
I tried to enable Debugging mode and the same, i tried to change the connection type,
i went to *settings* then *storage* the from the menu i chose *USB computer connection*, once i chose PTP or MTP it gives me this error "unfortunately, settings has stopped".
It is MTP checked by default although.
this happens even without debugging enabled.
How can i get my device connects to my PC? i need to transfer data.
Thanks
loai.zabin said:
Hi
I just installed a custom lolipop 5.02 using cyanogenmod CM 12 using ODIN to my galaxy s3 mini. and everything went will
after that i tried to connect my s3 to my PC it installs the drivers and it appears in the Device Manager but it does not appear in my computer and it wont connect to kies.
I tried to enable Debugging mode and the same, i tried to change the connection type,
i went to *settings* then *storage* the from the menu i chose *USB computer connection*, once i chose PTP or MTP it gives me this error "unfortunately, settings has stopped".
It is MTP checked by default although.
this happens even without debugging enabled.
How can i get my device connects to my PC? i need to transfer data.
Thanks
Click to expand...
Click to collapse
its a known bug for cm12. novafusion workin on it. you can use twrp's mtp to transfer files.
factorexh said:
its a known bug for cm12. novafusion workin on it. you can use twrp's mtp to transfer files.
Click to expand...
Click to collapse
So how could i transfer data until the fix comes ?
is there anyway to do that ?
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
loai.zabin said:
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
Click to expand...
Click to collapse
Only if you have TWRP 2.8.0.0 or higher :
1. Boot to TWRP recovery
2. Navigate to "Mount" and enable "enable MTP"
3. Connect your device to your PC
Now you can transfer files between your phone and PC
loai.zabin said:
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
Click to expand...
Click to collapse
I had a similar thing happen to me after an update and was forced to do a factory restore. That's why it's always good to save stuff to your removable storage; makes it much easier to transfer/salvage data when something goes wrong.
hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.
bakhiem91 said:
hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.
Click to expand...
Click to collapse
Does the USB Connection type notification appear in the status bar?
ya7hu said:
Does the USB Connection type notification appear in the status bar?
Click to expand...
Click to collapse
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up
bakhiem91 said:
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up
Click to expand...
Click to collapse
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.
I have this same issue using LOS 15.1. The solution is to go into Developer Settings and enable MTP using the 'Select USB Configuration' option. Then when you plug in via cable you will get the notification as normal. The problem is you have to do this every reboot, otherwise it's the same situation all over again. No Notification on plugging in and no way for your PC to see the device as it defaults to Charging mode.
I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?
przemcio510 said:
I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?
Click to expand...
Click to collapse
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!
ya7hu said:
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.
Click to expand...
Click to collapse
DirkGently said:
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!
Click to expand...
Click to collapse
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...
bakhiem91 said:
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...
Click to expand...
Click to collapse
I spoke too soon about USB Debugging working. It doesn't help across reboots. Gonna Clean Install now. Hope you find a fix.
Clean install didn't help me. Just Google 'Oreo no mtp' to see how common this is.
I have a Nexus 5X on Oreo that doesn't have this problem. Other N5X owners do have it. It's totally random.
Good news everyone...
A fix is coming:
https://review.lineageos.org/#/c/209834/
At least for LOS 15.1 and any other ROMs based upon it.
@bakhiem91
I downloaded the drivers and i have windows 7 64x.
Why isnt my device not showing up? I want to be able to just run the test software right onto my phone...
Try connecting another device and re-installing drivers alongwith changing the usb debugging option.
Sent from my Pixel 3 XL using Tapatalk
i already did that i enabled usb debugging mode in developer options. I also dont have another device...
SynGreis said:
i already did that i enabled usb debugging mode in developer options. I also dont have another device...
Click to expand...
Click to collapse
check you Device Manager, if you see a yellow mark beside your phone, it is absolutely because of ADB Driver
Odd...i reinstalled universal adb drivers and it worked...Issue resolved.