Database Develop

Galaxy note SHV-E160K

hi....
Can I flash Galaxy N7000 international version rom on SHV-E160K Galaxy note model?
Please let me know.

May be not if it has a completely different CPU
Sent from my GT-I9500 using xda premium

it has 1.5 Qualcom snapdragon processor

Yeah. So No
Sent from my GT-I9500 using xda premium

If he only would have written SHV-E160K into the search box...

can't download mode or on my Galaxy note shv-e160k
i root my samsung galaxy note shv-e160k using oding 3 v1.85 while stuck and removed USB cable them can not download mode or power on the phone, but my computer device manager seen device Qualcomm HS-USB QDLoader 9008 (com18) and ordin seen generally ID com 18, what i do help me please. Thanks

Hi friend i have shv e160k phone stuck on logo not getting in download mode or recovery mode so then i get in download mode through USB JIG but when try to flash firmware odin failed after NAND WRITE START!!!! HELP ME

Galaxy Note 5, RP SWREV: B:4 K:0 S:1

Well... trying to help a friend because his Samsung Galaxy Note 5 (SM-N920W8), according to him, got bricked. We tried samsung switch to fix error message saying "an error has occurred while updating the device software. use the emergency recovery function" , but unable have a connection with my windows 10 pc although usb device drive is recognize on device manager, samsung switch said it needs to have it on recovery mode. Only mode it can do is either downloading mode(odin) or the error showing as mentioned. Tried flashing with stock 7.0 (carrier unknown, MTA) via odin and have the phone on downloading mode with the AP check and clicking AP button with downloaded 7.0 FW, but failed, I did again and stuck on analysis, still failed. And again before doing it for the third time I noticed, on downloading mode screen showing:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME:SM-N920W8
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
FAP LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0X0301)
RP SWREV: B:4 K:0 S:1
can anyone tell me what are these codes, and I got failed with my first trial an error in red text saying SW REV. CHECK, FAIL DEVICE: , BINARY 1.
any comments and suggestion will be appreciated. thanks.

natnatenathan said:
Well... trying to help a friend because his Samsung Galaxy Note 5 (SM-N920W8), according to him, got bricked. We tried samsung switch to fix error message saying "an error has occurred while updating the device software. use the emergency recovery function" , but unable have a connection with my windows 10 pc although usb device drive is recognize on device manager, samsung switch said it needs to have it on recovery mode. Only mode it can do is either downloading mode(odin) or the error showing as mentioned. Tried flashing with stock 7.0 (carrier unknown, MTA) via odin and have the phone on downloading mode with the AP check and clicking AP button with downloaded 7.0 FW, but failed, I did again and stuck on analysis, still failed. And again before doing it for the third time I noticed, on downloading mode screen showing:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME:SM-N920W8
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
FAP LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0X0301)
RP SWREV: B:4 K:0 S:1
can anyone tell me what are these codes, and I got failed with my first trial an error in red text saying SW REV. CHECK, FAIL DEVICE: , BINARY 1.
any comments and suggestion will be appreciated. thanks.
Click to expand...
Click to collapse
Kindly Try To Follow The SmartSwitch Guide From Below Posted Thread And See If It Helps
https://forum.xda-developers.com/note5/general/guide-odin-flashing-stock-firmwares-t3634256

insomniac said:
Kindly Try To Follow The SmartSwitch Guide From Below Posted Thread And See If It Helps
https://forum.xda-developers.com/note5/general/guide-odin-flashing-stock-firmwares-t3634256
Click to expand...
Click to collapse
Thanks for your response Insomniac, well... It worked what I did is to look for the right stock rom for the galaxy note 5 which is a Canadian version, though didn't know exactly what android version is it into before it got messed up, anyway, thanks again mate. Cheers!

How to Unbrick S6?

Hi friends,
Please help to unbrick my phone after unsuccessful flashing to root. I used Odin3-v3.10.6 and CF-Auto-Root-zeroflte-zerofltexx-smg920f.far.
I started downloading mode, connect phone with PC, Windows found new device and installed it. After start Odin, open tar file. Odin found device in COM port. Start flashing.Odin fill half 1st block and stop with error "no connection". Phone freeze with screen:
Odin mode
Product name: sm-g920f
Current binary: Samsung official
System status: official
Reactivation lock: on
Secure download: enabled
Knox warranty void: 0 (0x0000)
RP SWREV: B:5 K:2 S:2
Custom binary(RECOVERY) blocked by R/L
Phone do net respond anymore to button pressing or long pressing screen remains the same and on.
Please help!
avk4avk
Sent from my iPad using Tapatalk

I just left it to drain battery. After it started normally
Sent from my iPad using Tapatalk

Galaxy tab 2 custom binary blocked by FRP USB NOT working.

I have a rooted gt 2 t719 , was working good with custom rom .
Then out of the blue no more boot and error "Custom binary locked by FRP , Secure fail : Kernel"
I looked for solution but the usb seems to be locked as well it was working but now with the lock pc ,odin,samsung ... does not find the device .
Is FRP lock to blame or is the usb port just broken (at a very bad moment )
Any help or insight would be appreciated .
odin mode (high speed)
PRODUCT NAME : SM-T719
CUSTOM
CUSTOM
FRP LOCK ON
WARRANTY VOID : 0X1 (2)
...

I have what sounds to be the same problem, but with an SM-T813. I ordered a Samsung Jig, will let you know if it helps the issue.

Really hope it does i see a jig is easally made wirh a 300k resistor and old usb cable ." "

scififreak said:
Really hope it does i see a jig is easally made wirh a 300k resistor and old usb cable ." "
Click to expand...
Click to collapse
The jig did nothing

I'm in the same situation as all of you guys...
PLEASE SENIORS HELP US

Samsung Galaxy A6 plus bricked when upgrading to Android 10

My Samsung Galaxy A6 Plus phone failed to update Android system software. And now it doesnt boot. It stucks up forever at SAMSUNG logo after it boots.
Samsung Galaxy A6+
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-A605G
CURRENT BINARY: Samsung Official
FRP LOCK: ON
OEM LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLED (CSB)
AP SWREV: S1, T1, R1, A6, P6
AP SWREV: K 6, S 6
SECURE DOWNLOAD : ENABLE
DID : 009a2dad7830
download mode !!
Click to expand...
Click to collapse

How did I successfully recovered my soft bricked Samsung phone along with data:
1. My phone was soft bricked while upgrading from Android 9 to Android 10. It was stuck at the SAMSUNG logo after booting.
2. Phone was having FRP LOCK & OEM LOCK both turned on (We can this info from restarting phone in recovery mode by pressing Power & Volume Up buttons)
- From info available on internet, I realised that if phone is FRP LOCK or OEM LOCK, then flashing it with TWRP is NOT recommended.
- So I decided to flash it with stock firmware only (A Stock ROM/Firmware is an official software that is designed by the manufacturer for a particular device)
3. To flash firmware using Odin, we first need to turn on the phone in download mode. Generally we can do this by starting phone by pressing Volume down + Power buttons
However, for some reasons my phone was not going in download mode (even after pressing those eyes). But it was going in recovery mode.
4. I used USB Jig to put the phone forcefully in download mode. (USB Jig is available on Amazon)
- Turned off phone using option provided in recovery mode
- Attach USB Jig
- Then press power button. Phone starts in download mode. Remove Jig quickly and attach USB cable and connect it to computer to flash it with Odin
5. Then I used Odin to flash stock firmware. In download mode, Odin detects the phone.
- In my case the phone was soft bricked because of the Android 10 upgrade. Hence I flashed it with Android9 firmware.
- Android9 stock firmware available here: https://www.sammobile.com/samsung/g...e/SM-A605G/INS/download/A605GDXU6BSL1/310956/
- Important: Read all instructions carefully on the site above how to use Odin to flash. Especially remember: Use HOME_CSC_*** if you want to keep your apps and data. This is VERY important.
- Also, first add all those AP, BL, CP etc files to Odin & then connect phone (which is in download mode) via USB and then click on Start button in Odin to start flashing
- After flashing with Android 9 firmware, I disconnected the phone from PC and restarted. But it was still hanging at Samsung logo. It was frustrating.
- But then I again rebooted the phone and this time just connected to PC, then it took some time to get the Samsung logo but then whoaaaa... it started successfully I was able to see all the data