I'm on MF1. Does anyone know what will happen if I flash to ML2 without the ML2 bootloader?
dkeepitabuck said:
I'm on MF1. Does anyone know what will happen if I flash to ML2 without the ML2 bootloader?
Click to expand...
Click to collapse
I don't think it will boot. What you can do however is flash MI2 (which is the leaked version of 4.3 with a more open bootloader), then flash ML2 on top of that. This will give you ML2, but you will still have an old bootloader so you can always flash back to MF1 if you want. Read this for a little more info. I haven't tried it personally but people are reporting that it works.
I don't think anything bad would happen if you do what you are suggesting, and personally I'd be interested to see if it would work. I don't know that anybody has tried it. If something does go wrong, you have the Odin for MF1, so you can always recover from any soft bricks.
my sgh-i537 triggered an ota update
im on root'd safestrap'd NE3 so it didnt go through
just putting out a heads up
if anyone nos what it is plz tell me lol
firestorm942 said:
my sgh-i537 triggered an ota update
im on root'd safestrap'd NE3 so it didnt go through
just putting out a heads up
if anyone nos what it is plz tell me lol
Click to expand...
Click to collapse
What android version are you on? If you have an incomplete kitkat upgrade,you will get a ota to finish upgrading it.
Im on the lastest 4.4.2 firmware ne3
Everything reads ne3 in info screen
Yes check the size of the ota. It's probably a update to kitkat. That happened to me before the last full ota came out. It's was an upgrade to fix first run problems. If it's very large, you should download and extract it. That way we can see what's in it. But as far as I know. S4 Active gets no more updates.
Hi there,
I am trying to restore my phone back to stock firmware in order to return it for insurance. Currently, I was able to unroot the phone and it is on the NG3 stock firmware. I still have safestrap recovery installed and I want to use odin to return the phone to 100% stock like it was when I got it. The only stock firmware I could find was for the NCE build. Would it work to flash that with odin and then OTA to NG3? If not, would somebody be able to share the correct NG3 firmware that I could flash with odin?
Thanks so much for your help!
Yes NCE will revert it to the day you bought it.
ellie692 said:
Hi there,
I am trying to restore my phone back to stock firmware in order to return it for insurance. Currently, I was able to unroot the phone and it is on the NG3 stock firmware. I still have safestrap recovery installed and I want to use odin to return the phone to 100% stock like it was when I got it. The only stock firmware I could find was for the NCE build. Would it work to flash that with odin and then OTA to NG3? If not, would somebody be able to share the correct NG3 firmware that I could flash with odin?
Thanks so much for your help!
Click to expand...
Click to collapse
If your phone isn't rooted and you've confirmed using root checker already just uninstall Safestrap apk.
So i get an i537 locked on AT&T ion ebay by almost 100 bucks so i decided to buy it instead an S3 because for the price was a better choice , thinking that i could unlock "free" but then i realized that i could do it but i had to have the zx3 box.... thing that i did'nt have and i am not going to buy it . So i had to buy the unlock code almost for 15 bucks on ebay with a link from a store of Spain, took me around 4 days to have it. The first thing that i wanted to do was root it, i hate bloatware, so i rooted it and leave the stock rom, yesterday i saw in gsmarena.com that it was getting Lollipop via OTA, so i had to restore it back in order to get it. Mine was running I537UCUCNH3 but i couldn't get the full firmware that is almost 1 gb or something like that so by mistake i get the I537UCUCNE3 to flash on odin.
It flash with no problems but then i get the problem that i didn't have the radio service, so i flashed the modem bin from here http://forum.xda-developers.com/showthread.php?t=2689218, after that i get signal and check for the update and it begins to download, almost an hour and a half then it begins to install the update and reboot and when it was on 28% it turned off and reboot. Then it says firmware was not installed and checked for the update and it says that is up to date check in XX hours again. I checked the band version and was on UCUAMF1 but with the I537UCUCNE3 version so i think that i flash it wrong and may be in the process of the update as is does not match it failed the update.
Now i can't restore again the modem.bin because it fails so i need urgent help to restore it and the lollipop update
tonochito said:
So i get an i537 locked on AT&T ion ebay by almost 100 bucks so i decided to buy it instead an S3 because for the price was a better choice , thinking that i could unlock "free" but then i realized that i could do it but i had to have the zx3 box.... thing that i did'nt have and i am not going to buy it . So i had to buy the unlock code almost for 15 bucks on ebay with a link from a store of Spain, took me around 4 days to have it. The first thing that i wanted to do was root it, i hate bloatware, so i rooted it and leave the stock rom, yesterday i saw in gsmarena.com that it was getting Lollipop via OTA, so i had to restore it back in order to get it. Mine was running I537UCUCNH3 but i couldn't get the full firmware that is almost 1 gb or something like that so by mistake i get the I537UCUCNE3 to flash on odin.
It flash with no problems but then i get the problem that i didn't have the radio service, so i flashed the modem bin from here http://forum.xda-developers.com/showthread.php?t=2689218, after that i get signal and check for the update and it begins to download, almost an hour and a half then it begins to install the update and reboot and when it was on 28% it turned off and reboot. Then it says firmware was not installed and checked for the update and it says that is up to date check in XX hours again. I checked the band version and was on UCUAMF1 but with the I537UCUCNE3 version so i think that i flash it wrong and may be in the process of the update as is does not match it failed the update.
Now i can't restore again the modem.bin because it fails so i need urgent help to restore it and the lollipop update
Click to expand...
Click to collapse
Flash the NE3 Odin package again and then flash the NH3 OTA update. Assuming that your radios are working you should get the OC6 update right away. Just be aware that currently there is no way to root OC6 and may never be, plus there is no way to downgrade back to a firmware that is rootable.
The issue you're running in to is that the updater checks all the files on the phone before installing the update. If all the files match what it thinks should be there then it will update just fine. If anything is changed, any system files, modems, or even if you've just rooted the update will fail to install as you've seen.
Devo7v said:
Flash the NE3 Odin package again and then flash the NH3 OTA update. Assuming that your radios are working you should get the OC6 update right away. Just be aware that currently there is no way to root OC6 and may never be, plus there is no way to downgrade back to a firmware that is rootable.
The issue you're running in to is that the updater checks all the files on the phone before installing the update. If all the files match what it thinks should be there then it will update just fine. If anything is changed, any system files, modems, or even if you've just rooted the update will fail to install as you've seen.
Click to expand...
Click to collapse
No i don't have the NH3 OTA i have the previous one and the post is very annoying and confusing for me, i have this one SGH-I537UCUCNE3_v4.4.2_ATT_ALL but now i can't get service as i mentioned now if i flash the modem.bin it fails i think that i bricked it.
And yes i kow that if something does not match on a system update it will fail, had the same sittuation on the HTC One m7 when it was going to lollipop update but i just flashed the correct firmware and it worked but with this one i am havig a hardtime, because has the baseband version unknown but i can't flash the modem.bin
tonochito said:
No i don't have the NH3 OTA i have the previous one and the post is very annoying and confusing for me, i have this one SGH-I537UCUCNE3_v4.4.2_ATT_ALL but now i can't get service as i mentioned now if i flash the modem.bin it fails i think that i bricked it.
And yes i kow that if something does not match on a system update it will fail, had the same sittuation on the HTC One m7 when it was going to lollipop update but i just flashed the correct firmware and it worked but with this one i am havig a hardtime, because has the baseband version unknown but i can't flash the modem.bin
Click to expand...
Click to collapse
Open the i537 Firmware Thread for links to all firmware
Reflash the NE3 Odin package
Flash the NH3 OTA file
Flash the OC6 OTA file
Devo7v said:
Open the i537 Firmware Thread for links to all firmware
Reflash the NE3 Odin package
Flash the NH3 OTA file
Flash the OC6 OTA file
Click to expand...
Click to collapse
Yes i have flahed that one and i have no signal but none of the firmware updates works both fails. One says footer is wrong the oficial one may i have to downgrade all the way till 4.3?
tonochito said:
Yes i have flahed that one and i have no signal but none of the firmware updates works both fails. One says footer is wrong the oficial one may i have to downgrade all the way till 4.3?
Click to expand...
Click to collapse
Did you read through the [HOW-TO][GUIDE] Install Any i537 Firmware? It explains exactly how to install any firmware you want. I know why you're having problems flashing the OTA's, but it seems like you haven't read how to flash them.
Devo7v said:
Did you read through the [HOW-TO][GUIDE] Install Any i537 Firmware? It explains exactly how to install any firmware you want. I know why you're having problems flashing the OTA's, but it seems like you haven't read how to flash them.
Click to expand...
Click to collapse
yes i have read it, it flash with no problems but weird part is that yesterday it worked fine but when i got the signal fix it shows on system version I537UCUCNE3 but band version was on MF1 an not on NE3. I can't remember what exactly i did after lollipop update fail but now i can't get the modem.bin working. So i guess that something went wrong during flash yesterday that now i can't fix the signal
tonochito said:
yes i have read it, it flash with no problems but weird part is that yesterday it worked fine but when i got the signal fix it shows on system version I537UCUCNE3 but band version was on MF1 an not on NE3. I can't remember what exactly i did after lollipop update fail but now i can't get the modem.bin working. So i guess that something went wrong during flash yesterday that now i can't fix the signal
Click to expand...
Click to collapse
The signal fix flashes the MF1 modems, that is why your band version says MF1; you're actually using modems from a older firmware.
These are exactly the steps you need to follow:
Start over and flash the NE3 Odin package. It doesn't matter if you have a signal or not because you should have already downloaded the OTA files with your computer ahead of time.
Once you're on stock NE3 (without modifying the modem), flash the NH3 OTA. Instructions on how to do that are described in detail in the i537 Firmware Guide.
Once you're on stock NH3, flash the OC6 OTA file. Instructions are described in detail in the i537 Firmware Guide.
If you still don't have a signal after you're on OC6, then try the Modem fix, but it may not work.
Basically what you need to do is follow the instructions step by step in the section titled "NE3 to OC6".
Devo7v said:
The signal fix flashes the MF1 modems, that is why your band version says MF1; you're actually using modems from a older firmware.
These are exactly the steps you need to follow:
Start over and flash the NE3 Odin package. It doesn't matter if you have a signal or not because you should have already downloaded the OTA files with your computer ahead of time.
Once you're on stock NE3 (without modifying the modem), flash the NH3 OTA. Instructions on how to do that are described in detail in the i537 Firmware Guide.
Once you're on stock NH3, flash the OC6 OTA file. Instructions are described in detail in the i537 Firmware Guide.
If you still don't have a signal after you're on OC6, then try the Modem fix, but it may not work.
Basically what you need to do is follow the instructions step by step in the section titled "NE3 to OC6".
Click to expand...
Click to collapse
well yes i did but weird part is that now i had to flash the second one the ml2 but still shows mf1,when i got the active it was on nh3 and i remember that i flashed the mf1.
But i am trying to do as says the post, no changing anything but i get that footer wrong and signature failed and the baseband unknow or may be something in that file is corrpupted i am using Odin 3.07 and the firmware after using winrar is 2.33 gb
tonochito said:
well yes i did but weird part is that now i had to flash the second one the ml2 but still shows mf1,when i got the active it was on nh3 and i remember that i flashed the mf1.
But i am trying to do as says the post, no changing anything but i get that footer wrong and signature failed and the baseband unknow or may be something in that file is corrpupted i am using Odin 3.07 and the firmware after using winrar is 2.33 gb
Click to expand...
Click to collapse
Are you saying that you can no longer flash the NE3 Odin package?
Devo7v said:
Are you saying that you can no longer flash the NE3 Odin package?
Click to expand...
Click to collapse
yes i can but i can't flash any of the nh3 firmware and remais with the unknown base band, perphaps the kernel was bricked? now i remember that i tried to do the steps of z3x box and happens the same situation unknown baseband
tonochito said:
yes i can but i can't flash any of the nh3 firmware and remais with the unknown base band, perphaps the kernel was bricked? now i remember that i tried to do the steps of z3x box and happens the same situation unknown baseband
Click to expand...
Click to collapse
So you can reflash the NE3 Odin package, that's good. I understand you don't have a baseband, but we need to make sure you can update your phone to NH3 and OC6 before we try to fix that. What exactly does your phone say when you try to flash the NH3 update? Maybe posting a photo would be easier.
Also check that the MD5 of the files you downloaded matches the MD5 posted in the i537 Firmware Thread. If the MD5's match then you have a good download, if they don't match then you have a corrupted download and need to redownload the files.
Devo7v said:
So you can reflash the NE3 Odin package, that's good. I understand you don't have a baseband, but we need to make sure you can update your phone to NH3 and OC6 before we try to fix that. What exactly does your phone say when you try to flash the NH3 update? Maybe posting a photo would be easier.
Also check that the MD5 of the files you downloaded matches the MD5 posted in the i537 Firmware Thread. If the MD5's match then you have a good download, if they don't match then you have a corrupted download and need to redownload the files.
Click to expand...
Click to collapse
it's very weird why i can't flash the NH3, trust me i have since yesterday i have tried but no luck, i have followed all steps and fails
tonochito said:
it's very weird why i can't flash the NH3, trust me i have since yesterday i have tried but no luck, i have followed all steps and fails
Click to expand...
Click to collapse
What file is inside the update.zip file you created? Can I see a screenshot from your computer?
Devo7v said:
What file is inside the update.zip file you created? Can I see a screenshot from your computer?
Click to expand...
Click to collapse
the cfg
tonochito said:
the cfg
Click to expand...
Click to collapse
Honestly, I have no idea why it isn't working. I would suggest downloading the file again (make sure the MD5's match), I'm going to upload another copy I have and send you a link to it to try.
tonochito said:
the cfg
Click to expand...
Click to collapse
Wait did you put the cfg inside a zip?! You have to rename 240058.cfg to update.zip, not compress it to a zip archive. Or did I misunderstand your post?
Devo7v said:
Honestly, I have no idea why it isn't working. I would suggest downloading the file again (make sure the MD5's match), I'm going to upload another copy I have and send you a link to it to try.
Click to expand...
Click to collapse
i did it twice from the post and from another guy who upload the same file, that's the reason that i was thinking to downgrade to 4.3 but may be i won't be able to do it
Give this file a shot. I know for a fact people have downloaded it and updated to NH3 successfully.
thisisapoorusernamechoice said:
Wait did you put the cfg inside a zip?! You have to rename 240058.cfg to update.zip, not compress it to a zip archive. Or did I misunderstand your post?
Click to expand...
Click to collapse
i have done both things the problem is that i don't have baseband flashing the stock file of NC3 after i try to update to NH3 it fails no matter i do so i can't install lollipop, i have baseband flashing the old modem.bin but can't install the updates
Hey ho guys. I have a 5S with the Downgrade to NCE flash found on this board. I would like to have the latest Kitkat without updating to Lollipop and getting the locked bootloader. I just downgraded today to NCE and bravely did one OTA. It got me to NG3. Can I OTA again to get OA1 or will it jump me to OC4? Or should I use one of the methods here on the board to upgrade and totally avoid OTA? Thanks, later.
Sowden said:
Hey ho guys. I have a 5S with the Downgrade to NCE flash found on this board. I would like to have the latest Kitkat without updating to Lollipop and getting the locked bootloader. I just downgraded today to NCE and bravely did one OTA. It got me to NG3. Can I OTA again to get OA1 or will it jump me to OC4? Or should I use one of the methods here on the board to upgrade and totally avoid OTA? Thanks, later.
Click to expand...
Click to collapse
If you want root capabilities i wouldn't take any OTA. You'll still have to go back to NCE to root anyhow i believe. As far as the boot loader it is and always has been locked on the AT&T S5. The only method for root is towel root and I'm not sure if it'll work on NG3. If not you'll have to go down to NCE
dirtydodge said:
The only method for root is towel root and I'm not sure if it'll work on NG3. If not you'll have to go down to NCE
Click to expand...
Click to collapse
Yeah, I should have preference that I am after root. But towelroot works on NG3, you can read about that here.
http://forum.xda-developers.com/att-galaxy-s5/general/g900and3tong3keeprootota-zip-t2862299
After I took the brave OTA I followed the threads instructions and it worked. There is a thread here that talks about root for OA1.
http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
It says just to take the OTA. I guess its still safe to take the OTA then after NG3? And I can't seem to find any rom on here thats stock OA1. Anyone know if I aren't seeing it? Thanks.
Sowden said:
Yeah, I should have preference that I am after root. But towelroot works on NG3, you can read about that here.
http://forum.xda-developers.com/att-galaxy-s5/general/g900and3tong3keeprootota-zip-t2862299
After I took the brave OTA I followed the threads instructions and it worked. There is a thread here that talks about root for OA1.
http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
It says just to take the OTA. I guess its still safe to take the OTA then after NG3? And I can't seem to find any rom on here thats stock OA1. Anyone know if I aren't seeing it? Thanks.
Click to expand...
Click to collapse
Most of the roms are based on nce or ng3. If you go to oa1 and flash a nce or ng3 rom your phone will be slow because of the different bootloader, and the camera is screwed up. I'd stay on ng3 and not worry about oa1. That's my opinion. I'm on 5.0 running the Twi5ted rom and having no problems with it. Most devs have moved to 5.0 lollipop and the 4.4.2 - 4.4.4 roms will be more and more abandond in my opinion.
dirtydodge said:
Most of the roms are based on nce or ng3. If you go to oa1 and flash a nce or ng3 rom your phone will be slow because of the different bootloader, and the camera is screwed up. I'd stay on ng3 and not worry about oa1. That's my opinion. I'm on 5.0 running the Twi5ted rom and having no problems with it. Most devs have moved to 5.0 lollipop and the 4.4.2 - 4.4.4 roms will be more and more abandond in my opinion.
Click to expand...
Click to collapse
Ah see I haven't tried any of the custom roms posted on here yet. But can I have NC3 as stock and on another ROM Slot (using Safestrap) have a Lollipop rom? Having one slot be 4.2.2 and the other be 5, basically. So the bootloader is different from NC3 to OA1, good to know. I'm glad I stopped at NC3 then. Thanks for your help.
Sowden said:
Ah see I haven't tried any of the custom roms posted on here yet. But can I have NC3 as stock and on another ROM Slot (using Safestrap) have a Lollipop rom? Having one slot be 4.2.2 and the other be 5, basically. So the bootloader is different from NC3 to OA1, good to know. I'm glad I stopped at NC3 then. Thanks for your help.
Click to expand...
Click to collapse
I'm not sure on the different slots and bootloader mainly because when i used different slots the battery drain was unbearable. I don't know if they every fixed the battery drain issue when using different slots. It was bad enough that i just stuck to the stock slot and flashed only in that slot.