Related
i was in Xrecovery>avanced moving stuffs and i did something like unmount something and restart, then my cel cant boot by any kind of stuffs, like flash, or press back botton. (sorry my english.)
now i cant make it boot stuck in Sony ericson logo.
Vlackrs said:
i was in Xrecovery>avanced moving stuffs and i did something like unmount something and restart, then my cel cant boot by any kind of stuffs, like flash, or press back botton. (sorry my english.)
now i cant make it boot stuck in Sony ericson logo.
Click to expand...
Click to collapse
Use PC companion or SUES to restore the original firmware back then re-root your phone and install your chosen ROM and boom you're back.
smyth12 said:
Use PC companion or SUES to restore the original firmware back then re-root your phone and install your chosen ROM and boom you're back.
Click to expand...
Click to collapse
GingerDX i have installed before this problem, i will try to do what you say, brb
Vlackrs said:
GingerDX i have installed before this problem, i will try to do what you say, brb
Click to expand...
Click to collapse
After re-rooting your phone you can once again install GingerDX.. Just don't mess with settings you're not sure of
PC companion not work cuz i cant boot my phone =( im stuck in sony ericson, and where i can find SUES? ty
SEUS is no longer available... you have to plug your phone into the computer, remove the battery, on PC companion it will say "Repair this phone" in small lettering, click that then with your phone connected to the computer via USB hold the back button and put your battery in, this will put your phone into Flash mode and allow PC companion to repair your phone
i love you dude, thank you, i will not mess up again with that XD, btw i have a year using this website is awesome, i was trying to learn more about Xrecovery and CWM ty!!
What do you mean you have a gear using this website?
CWM and Xrecovery can be dangerous..
No problem!
haha my bad, "year", btw PC companion cant find a software to install, right now im talking to Sony ericson.
i think cuz i have other baseband =S
Hmm, I had this problem, just yesterday infact, I still had access to recovery though... I'm not sure what you should do, I think SE will tell you to send the phone back to them to be honest..
yea my phone its dead, QQ, lets get iphone 5 this new year, ty Smyth12 anyways
Vlackrs said:
yea my phone its dead, QQ, lets get iphone 5 this new year, ty Smyth12 anyways
Click to expand...
Click to collapse
There still is a way to fix the phone using PC companion, the baseband doesn't matter.. as far as I know, don't quote me on that... hmm.. When I think of something I will let you know
Guys, forget PC Companion (PCC) and Update Service (SEUS) ...
If your phone still gets to the Sony Ericsson Logo, or still shows some sign of life so you can be sure that the bootloader and kernel (STOCK Kernel - I don't know if this works with custom kernels as well) is still alive, restore your device this way:
Make sure you have a Java Runtime installed.
If you're on a 64-Bit Windows Edition you NEED to have the 32-Bit JRE installed!
Make sure you have the Android drivers installed
(should already be the case if you installed PC Companion / Update Service)
Download Flashtool 0.2.9.1
Extract it to C:\Flashtool
Download Android 2.1.1.C.0.0
Copy the "X8_2.1.1.C.0.0._un.ftf" you just downloaded INTO the "firmwares" folder inside the Flashtool directory.
Disconnect your phone from the computer and turn it OFF!
Now start the X10FlashTool.exe in C:\Flashtool
Plug the USB cable into JUST your phone (NOT into the computer!).
Click "Flash" in Flashtool and select X8_2.1.1.C.0.0._un.ftf you copied into the Firmwares folder.
In the next window don't do anything, just click "OK"
Flashtool will show you a window about what you have to do:
- PRESS and HOLD the BACK button of your phone.
- Connect the USB cable to your computer. Keep the button PRESSED!
- If Windows is nagging about installing drivers - let it do its job. Keep the button PRESSED!
- Once you see output happening in Flashtool's window you can release the back button of the phone.
Patiently wait until flashing finished.
Now, as Flashtool will tell you ... disconnect the phone and turn it on.
BE PATIENT - the first boot can take a few minutes.
Once the phone booted up ...
Enable "Unknown Sources" and "USB Debugging" in your phone's settings.
Connect the phone back to the computer.
Press "Root" and let Flashtool root the Droid.
A automatic reboot will follow!
Once the phone finished rebooting ...
Press "Ask root perm" and look at your phone. You will get a popup from Superuser to grant su permissions. Confirm the request!
Now click "xRecovery" to inject xRecovery into your phone.
Done ...
Now you can go ahead and install a xRecovery compatible ROM (i.e. FroyoPro).
Download the ZIP you want to flash and push it to your phone's SD card. Example:
adb push C:\Users\<your_username>\Downloads\FroyoPro-v1.1.zip /sdcard
(you need to input that command in a Command Prompt)
If you want GingerDX back on your phone ...
- Download GingerDX v013 and copy it onto your phone's SD card (i.e. by ADB)
- Download GingerDX v020 and copy it onto your phone's SD card (i.e. by ADB)
- From Flashtool make the phone to reboot into xRecovery.
- Flash GingerDX v013 in xRecovery.
- Reboot
- Keep tapping on the screen once the Sony Ericsson Logo appears to get into CWM.
- Flash GingerDX v020 in CWM.
- Full-Wipe ("Factory Reset")
- Reboot
I just revived my X8 a few hours ago by this way after a update flash went terribly wrong for reasons I'm not able to tell.
ty, and ive trying to fix it but nop, nothing.
smyth12 said:
Hmm, I had this problem, just yesterday infact, I still had access to recovery though... I'm not sure what you should do, I think SE will tell you to send the phone back to them to be honest..
Click to expand...
Click to collapse
If you can access recovery, then simply install your rom agen.
Sent from my MT15i using Tapatalk
B.Jay said:
Guys, forget PC Companion (PCC) and Update Service (SEUS) ...
If your phone still gets to the Sony Ericsson Logo, or still shows some sign of life so you can be sure that the bootloader and kernel (STOCK Kernel - I don't know if this works with custom kernels as well) is still alive, restore your device this way:
Make sure you have a Java Runtime installed.
If you're on a 64-Bit Windows Edition you NEED to have the 32-Bit JRE installed!
Make sure you have the Android drivers installed
(should already be the case if you installed PC Companion / Update Service)
Download Flashtool 0.2.9.1
Extract it to C:\Flashtool
Download Android 2.1.1.C.0.0
Copy the "X8_2.1.1.C.0.0._un.ftf" you just downloaded INTO the "firmwares" folder inside the Flashtool directory.
Disconnect your phone from the computer and turn it OFF!
Now start the X10FlashTool.exe in C:\Flashtool
Plug the USB cable into JUST your phone (NOT into the computer!).
Click "Flash" in Flashtool and select X8_2.1.1.C.0.0._un.ftf you copied into the Firmwares folder.
In the next window don't do anything, just click "OK"
Flashtool will show you a window about what you have to do:
- PRESS and HOLD the BACK button of your phone.
- Connect the USB cable to your computer. Keep the button PRESSED!
- If Windows is nagging about installing drivers - let it do its job. Keep the button PRESSED!
- Once you see output happening in Flashtool's window you can release the back button of the phone.
Patiently wait until flashing finished.
Now, as Flashtool will tell you ... disconnect the phone and turn it on.
BE PATIENT - the first boot can take a few minutes.
Once the phone booted up ...
Enable "Unknown Sources" and "USB Debugging" in your phone's settings.
Connect the phone back to the computer.
Press "Root" and let Flashtool root the Droid.
A automatic reboot will follow!
Once the phone finished rebooting ...
Press "Ask root perm" and look at your phone. You will get a popup from Superuser to grant su permissions. Confirm the request!
Now click "xRecovery" to inject xRecovery into your phone.
Done ...
Now you can go ahead and install a xRecovery compatible ROM (i.e. FroyoPro).
Download the ZIP you want to flash and push it to your phone's SD card. Example:
adb push C:\Users\<your_username>\Downloads\FroyoPro-v1.1.zip /sdcard
(you need to input that command in a Command Prompt)
If you want GingerDX back on your phone ...
- Download GingerDX v013 and copy it onto your phone's SD card (i.e. by ADB)
- Download GingerDX v020 and copy it onto your phone's SD card (i.e. by ADB)
- From Flashtool make the phone to reboot into xRecovery.
- Flash GingerDX v013 in xRecovery.
- Reboot
- Keep tapping on the screen once the Sony Ericsson Logo appears to get into CWM.
- Flash GingerDX v020 in CWM.
- Full-Wipe ("Factory Reset")
- Reboot
I just revived my X8 a few hours ago by this way after a update flash went terribly wrong for reasons I'm not able to tell.
Click to expand...
Click to collapse
awesome i will try this!!! i will reply later.
taaviu said:
If you can access recovery, then simply install your rom agen.
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
im the problem not "smyth12", but i cant do anything not even get into my xrecovery, i think what i did was unmount the file system using recovery by error, or some important file to boot at least with Xrecovery.
@B.Jay
Its working!!! that .FTF save me!!! <33333333333 thank you!!!
Vlackrs said:
@B.Jay
Its working!!! that .FTF save me!!! <33333333333 thank you!!!
Click to expand...
Click to collapse
You're welcome mate.
Remember to keep the instructions and required files save in case you manage to soft-brick the device again.
i dont understand this .
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now
lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.
eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!
use the update service
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!
how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel
Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.
X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D
Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum
I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA
eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped
Hi:
Two problems going on...
With phone connected to computer via usb, unable to find device and backup photos, etc.
I want to do this so I can reinstall original or upated Samsung ROM and/or firmware.
I had someone root phone and install Cezar's Basic Rom about two years ago and I would like to convert phone
back to original settings.
stoutflier said:
With phone connected to computer via usb, unable to find device and backup photos, etc.
Click to expand...
Click to collapse
First ensure that you have USB debugging is ticked on your phone
Then try these for USB problems http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
stoutflier said:
I want to do this so I can reinstall original or upated Samsung ROM and/or firmware.
Click to expand...
Click to collapse
Download Orginal firmware for your region from http://forum.xda-developers.com/showthread.php?t=1102881 and Follow directions to the dot
IF you want to root and have CWM recovery, download a semaphore Kernel from
http://forum.xda-developers.com/showthread.php?t=1112908 and flash with Odin on PDA
Not sure what you mean by "find device", but if you desire to see phone as mass storage device on your computer, you must have USB debugging turned OFF on your phone (at least that's how it works on my phones).
John
stoutflier said:
Hi:
Two problems going on...
With phone connected to computer via usb, unable to find device and backup photos, etc.
I want to do this so I can reinstall original or upated Samsung ROM and/or firmware.
I had someone root phone and install Cezar's Basic Rom about two years ago and I would like to convert phone
back to original settings.
Click to expand...
Click to collapse
I can connect the phone to Kies. I reinstalled Kies, I wiped cache, rebooted the PC nothing. I tried many times connect / disconnect data cable.
What else can I do?
PS:Any advice is welcome, and if the topic is not open in the appropriate area, can a moderator to move it.
Thank you very much
What's the exact error?
Sent from my GT-I9070 using xda premium
There is an actual error but does not connect after about two or three minutes of testing.
Kies returns to the main screen as if I just opened Kies program.
I'll post and some printscreens ...
LE: Checked in Developer Options, Enable USB Debugging and Mock Locations.
As I know you can't use Kies with USB debuging ON (I see you are rooted, and you are sure turn that option ON). Turn it off and retry.
I tried it, same result.
I finished all options in trying to connect the phone to Kies.
Suggestions?
R_a_z_v_a_n said:
I finished all options in trying to connect the phone to Kies.
Suggestions?
Click to expand...
Click to collapse
Hm, I just unchecked USB debuging, and mock location. Kies recognise my phone, I was thinking it will not.
Try this. Connect phone with USB and pull down notification bar. Tap on USB connection notification under that brightness bar. And check MTP - first option.
I tried this version without any result. I'm tired of trying to connect Kies software.
Another question, can i backup the phone without Kies?
if u have a partition on SD ,u'll face such probs!!
try unmounting SD
Sent from my GT-S5360 using xda premium
R_a_z_v_a_n said:
I tried this version without any result. I'm tired of trying to connect Kies software.
Another question, can i backup the phone without Kies?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2081729
What do you want to backup exacly?
All data, like apps, settings, SMS, everything. I back-up my contacts onDropbox, foto and videos on the PC, but thats all.
Lets see with moborobo what can i do. Thanks.
Bad post.
Error from my network
R_a_z_v_a_n said:
All data, like apps, settings, SMS, everything. I back-up my contacts onDropbox, foto and videos on the PC, but thats all.
Lets see with moborobo what can i do. Thanks.
Click to expand...
Click to collapse
CWM backup maybe?
I dont know to much about that.
R_a_z_v_a_n said:
I dont know to much about that.
Click to expand...
Click to collapse
Use ThunderZap, enter recovery. You get backup there, start it - wait about 8-10 minutes to be done. :angel: Only bad thing is that you can't restore data on some other ROM.
No results.
It may posible i have uninstalled any application that may be connected with connecting to Kies? But I can access phone card and cable.
R_a_z_v_a_n said:
No results.
It may posible i have uninstalled any application that may be connected with connecting to Kies? But I can access phone card and cable.
Click to expand...
Click to collapse
U need flash rom via odin again. I got same error but i flash rom again, all fine
Sent from my GT-I9070 using Tapatalk 2
dungeonshard said:
I got same error but i flash rom again, all fine
Click to expand...
Click to collapse
What we do wrong? Are u flash same firmwares? Or ..
I will flash again for the afternoon, but I think i'm lose backup of applications, right?
R_a_z_v_a_n said:
What we do wrong? Are u flash same firmwares? Or ..
I will flash again for the afternoon, but I think i'm lose backup of applications, right?
Click to expand...
Click to collapse
If you do not do factory reset, then you do not loose apps and data.
That i know, but recomanded is to do a reset?
Sent from my GT-I9070 using xda premium
Hello yesterday I change build.prop file, but I forget to give the authorization; I try to restart in recovery but I will not try to reinstall the original ROM with PC companion and Flashtool but none of the two do not see that this is a xperia z1 I know what to do if you have ideas
heffy54 said:
Hello yesterday I change build.prop file, but I forget to give the authorization; I try to restart in recovery but I will not try to reinstall the original ROM with PC companion and Flashtool but none of the two do not see that this is a xperia z1 I know what to do if you have ideas
Click to expand...
Click to collapse
What's the error message you are getting?
Have you tried another pc? Some user had the problem of a not connectable phone and solved the problem by using another pc.
so, you cannot enter into recovery mode, is that right?
with PC companion he said he finds no software available with Flashtool he said
error-
error- flashing
I try another pc but always the same.
thank you for trying to help me
Yes, that's it
you think this can work ?
http://forum.xda-developers.com/showthread.php?t=2682255