[Q] gt-i9070 touch not working after upgrade to jellybean - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

when i updated my galaxy gt-i9070 to jellybeen touch stop working all keys r working ...i can go on odin mode recovery mode with the help of keys..i flashed various stock or custum rom but same result plz help.

trojan7 said:
when i updated my galaxy gt-i9070 to jellybeen touch stop working all keys r working ...i can go on odin mode recovery mode with the help of keys..i flashed various stock or custum rom but same result plz help.
Click to expand...
Click to collapse
What firmware did you flashed first time?

R_a_z_v_a_n said:
What firmware did you flashed first time?
Click to expand...
Click to collapse
my previous rom was I9070JPLK2/I9070OJPLI1/I9070JPLK2/I9070JPLK2
working perfectly then i flash I9070DDULP8_I9070ODDULP8_HOME.tar.md5 JB ..the LCD display is ok and the others button seems doing fine..

Related

[q] help required!!!

Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.
wic android version of gingerbread do you have on your phone..
sorry for asking again...
CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--
even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??
Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep
can you suggest any app for checking it??

[Q] Best Kernel / Rom combination for the I9070

Hello,
So after getting some knowledge of the things (thanks Shut_Down :good, I was wondering which is the best combination for this phone?
Right now I am running the stock ROM and kernel.
Will the new official JB upgrade also change kernel or just ROM?
Since people here have already tried different combinations, which combinations have you found that give good, consistent and fast running?
Thanks!
R: [Q] Best Kernel / Rom combination for the I9070
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
chucky-bean v5 + cocore-E 2.9 nighly(CWM)
Chucky Bean v6; Cocore_E 2.9 CWM
Envoyé depuis mon GT-I9070
Well, I did't expect this...
Thanks for your replys!
Funny thing is that each of you have a different combination.
Any one actually did testing which combo is better? Or maybe i sould ask, why are you using he combinations you wrote?
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Click to expand...
Click to collapse
Same here. Stock JB LQ4 + ThunderZap 3.5.
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Click to expand...
Click to collapse
Try both and see what firs you better. And about order, you can install ROM with temp. CWM, but I suggest you use permanent, with custom kernel. So first kernel, than ROM.
Sent from Galaxy S Advance
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
YMatrix said:
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
Click to expand...
Click to collapse
Hm, on this Russian JB there is no Hebrew as I see. So if you want it you should wait for release for your country or any with your language.
shut_down said:
Hm, on this Russian JB there is no Hebrew as I see.
Click to expand...
Click to collapse
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
YMatrix said:
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
Click to expand...
Click to collapse
we actually have the ROM in our phone bro!
Brainiac.shri said:
we actually have the ROM in our phone bro!
Click to expand...
Click to collapse
You mean that each ROM usually supports all the languages?
YMatrix said:
You mean that each ROM usually supports all the languages?
Click to expand...
Click to collapse
a lot. but in this case hebrew isnt listed sorry!
Before installing a ROM is there an option to view which languages it supports?
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
Before installing a ROM is there an option to view which languages it supports?
Click to expand...
Click to collapse
No, unless dev write it on its thread.
Sent from Galaxy S Advance
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
YMatrix said:
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
Click to expand...
Click to collapse
roms only.
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Одг: [Q] Best Kernel / Rom combination for the I9070
Rahul125125 said:
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
Sent from Galaxy S Advance

[Q] Stock JB ROM comparison

I've lately upgraded my Samsung S advance with GB 2.3.6 to the JB 4.1.2. I used the stock rom available for India (I9070DDULP8).
all the features are great.... But my phone seems to get stuck every time and stops functioning..I don't even have many applications installed in it that might slow it down... It gets stuck so bad that I have to remove the battery to turn it off and then reboot... I heard the JB ROM available for Russia and Poland would be better.
Would flashing my phone with the Russian or Poland's Stock ROM resolve the issues??? Would it remove the issues with the phone getting stuck and lagging?? And if it might help...then which one is more preferable?? Russian or Poland's??
please help me out..
Actually, the Indian FW is supposed to be the best. Yes, I know what you're thinking, if this is the best, what would the worst be like.
Don't fret, just root and install co-core custom kernel and then you'll be good to go.
Sent from my GT-I9070
DDULP8 is the best firm with co core 6
Inviato dal mio GT-I9070 con Tapatalk 2
You flashed with odin or via samsung update? Try wipe cache, wipe dalvik.
Sent from my GT-I9070 using xda app-developers app
brazilian rom
i use 4.1.2 brazilian carrier TIM + cocore 6, and work fine.
Rom Stock
apparently most stable are those of Germany and Serbia. But more importantly in the kernel. I think the cocore 6.0 with CWM is best for now.
daniel.stuart14 said:
i use 4.1.2 brazilian carrier TIM + cocore 6, and work fine.
Click to expand...
Click to collapse
I upgraded my brazillian rom JLPA to JLPB and I realized that when decreases the brightness of the LCD the color was kind of brown...
arffrhn said:
You flashed with odin or via samsung update? Try wipe cache, wipe dalvik.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I flashed it via Odin flasher. Well if i install the Kernel and the ROM being used by you... would it remove those irritating lags and would it stop from getting stuck every time?
And please tell me how to install the Kernel and ROM... and where would I find them???
Thanx a lot
Akash.Bhagat said:
I flashed it via Odin flasher. Well if i install the Kernel and the ROM being used by you... would it remove those irritating lags and would it stop from getting stuck every time?
And please tell me how to install the Kernel and ROM... and where would I find them???
Thanx a lot
Click to expand...
Click to collapse
It shouldn't lag anymore. I don't have any lags at all.
List of rom here: http://forum.xda-developers.com/showthread.php?t=2110245

[Q] TWRP for Jellybean odin flashable Samsung Galaxy S advance

I am using Samsung galaxy S advance with jelly bean 4.1.2. As jelly bean on this phone is laggy I wanted to install Custom ROM. So I tried to install TWRP recovery from odin. But the TWRP file was for Gingerbread. So, now My phone doesn't boot nor does it goes to recovery mode. It just goes on download mode. So I need TWRP for jellybean for Samsung Galaxy S Advance odin flashable as I think I can flash now by that way only. Please give me the link for that. Or if there is any other way I can solve this problem. Thanx in advance.
Reflash firmware.
Root you phone. Download the CWM zip by Shaaan. FLASH ( IN RECOVERY ) a custom kernel with TWRP
Sent from my GT-I9070 using xda premium
Jeroenvk94 said:
Reflash firmware.
Root you phone. Download the CWM zip by Shaaan. FLASH ( IN RECOVERY ) a custom kernel with TWRP
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I had rooted my phone. Sorry I am new on this kinda things. So by reflashing firmware u meant ROM or what? Can u be more descriptive please and give me links to them. I can only boot on download mode. I can't go to recovery mode nor can I boot normally.
menidus said:
I had rooted my phone. Sorry I am new on this kinda things. So by reflashing firmware u meant ROM or what? Can u be more descriptive please and give me links to them. I can only boot on download mode. I can't go to recovery mode nor can I boot normally.
Click to expand...
Click to collapse
if you can't boot first reflash your jellybean rom the one you flash before do it again. Then go to this thread http://forum.xda-developers.com/showthread.php?t=2140597 then download CoCore-E-6.2-TWRP.zip after that unzip the file put the kernel.bin in sdcard (internal)
Go to terminal emulator
su
Click to expand...
Click to collapse
dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
Click to expand...
Click to collapse
Nikko028 said:
if you can't boot first reflash your jellybean rom the one you flash before do it again. Then go to this thread http://forum.xda-developers.com/showthread.php?t=2140597 then download CoCore-E-6.2-TWRP.zip after that unzip the file put the kernel.bin in sdcard (internal)
Go to terminal emulator
Click to expand...
Click to collapse
Cocafe says the safer method is by recovery. If the command entered is wrong, you could hard brick your phone.
First temporary CWM by shaan, then use it to flash cocore+twrp
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
harith.unnikrishnan said:
Cocafe says the safer method is by recovery. If the command entered is wrong, you could hard brick your phone.
First temporary CWM by shaan, then use it to flash cocore+twrp
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Click to expand...
Click to collapse
Can I get the link of TWRP for Samsung Galaxy S advance odin flashable please. Or CWM odin flashable.
Nikko028 said:
if you can't boot first reflash your jellybean rom the one you flash before do it again. Then go to this thread http://forum.xda-developers.com/showthread.php?t=2140597 then download CoCore-E-6.2-TWRP.zip after that unzip the file put the kernel.bin in sdcard (internal)
Go to terminal emulator
Click to expand...
Click to collapse
I didn't flashed jellybean. I updated from Gingerbread to Jellybean from Samsung Kies official. So I don't have the file to flash.
menidus said:
I didn't flashed jellybean. I updated from Gingerbread to Jellybean from Samsung Kies official. So I don't have the file to flash.
Click to expand...
Click to collapse
Well, then download it! http://forum.xda-developers.com/showthread.php?t=2110245
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Hit thanks if I helped!
---------- Post added at 11:33 AM ---------- Previous post was at 11:26 AM ----------
menidus said:
Can I get the link of TWRP for Samsung Galaxy S advance odin flashable please. Or CWM odin flashable.
Click to expand...
Click to collapse
Goto cocafe's thread. He made cocore kernel+twrp (recovery flashable )zip file. Follow the thread "from stock gb to custom jb" by panda00.
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Hit thanks if I helped!
harith.unnikrishnan said:
Well, then download it! http://forum.xda-developers.com/showthread.php?t=2110245
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Hit thanks if I helped!
---------- Post added at 11:33 AM ---------- Previous post was at 11:26 AM ----------
Goto cocafe's thread. He made cocore kernel+twrp (recovery flashable )zip file. Follow the thread "from stock gb to custom jb" by panda00.
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Hit thanks if I helped!
Click to expand...
Click to collapse
TWRP for Jellybean Samsung Galaxy S advance odin flashable. Is this available or not??
menidus said:
TWRP for Jellybean Samsung Galaxy S advance odin flashable. Is this available or not??
Click to expand...
Click to collapse
Dude.. no it isn't. Flash CoCoreE6.2+TWRP and you'll have it, and CoCore is also good for speed and batt life.....
Sent from my GT-I9070 using xda premium
Jeroenvk94 said:
Dude.. no it isn't. Flash CoCoreE6.2+TWRP and you'll have it, and CoCore is also good for speed and batt life.....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
CoCoreE6.2+TWRP...I would be very thankful if I could get the link for that.
menidus said:
CoCoreE6.2+TWRP...I would be very thankful if I could get the link for that.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=37782328
Scroll down to 3rd post
Download CoCore6.2 tWRP
Put in SD card
Go in Recovery Mode ( Vol up+home+power )
Flash it
Sent from my GT-I9070 using xda premium
Jeroenvk94 said:
http://forum.xda-developers.com/showthread.php?p=37782328
Scroll down to 3rd post
Download CoCore6.2 tWRP
Put in SD card
Go in Recovery Mode ( Vol up+home+power )
Flash it
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
The problem is that phone doesn't boot normally and it doesn't go to recovery mode as well. It can only go in download mode. I need something which can be flashed from odin.
menidus said:
The problem is that phone doesn't boot normally and it doesn't go to recovery mode as well. It can only go in download mode. I need something which can be flashed from odin.
Click to expand...
Click to collapse
Download JB firmware and flash it using Odin. Then install kernel from recovery
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
harith.unnikrishnan said:
Download JB firmware and flash it using Odin. Then install kernel from recovery
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Click to expand...
Click to collapse
Sorry asking you again. I am from Nepal and I brought my phone from Dubai. Can you link me the right JB firmware. Thanx in Advance.
menidus said:
Sorry asking you again. I am from Nepal and I brought my phone from Dubai. Can you link me the right JB firmware. Thanx in Advance.
Click to expand...
Click to collapse
:facepalm:
harith.unnikrishnan said:
Well, then download it! http://forum.xda-developers.com/showthread.php?t=2110245
Click to expand...
Click to collapse
You can install any country firmware (except china of course)... I think the UAE firmware is available(not sure)
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Hit thanks if I helped!
harith.unnikrishnan said:
:facepalm:
You can install any country firmware (except china of course)... I think the UAE firmware is available(not sure)
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Hit thanks if I helped!
Click to expand...
Click to collapse
Thanks. I am downloading it now. Will tell you what happens next.
menidus said:
Thanks. I am downloading it now. Will tell you what happens next.
Click to expand...
Click to collapse
Thanks. My phone is working fine after flashing with Jellybean...
Hi, i'd like some help...
I have updated my galaxy s advanced (mine is the brazilian version, here's called S2 lite) from gingerbread to jelly bean 4.1.2, but the phone now is really bad, freezes all the time, and stuff...
I'd like to know how to install a recovery and, then cyanogenmod...
where do I download the right recovery for jellybean s advanced?
Sorry for the noob question, i'm just afraid to brick the phone, since I'm new to this stuff, and thanks for the help in advance... also, my phone is rooted
crawlerx said:
Hi, i'd like some help...
I have updated my galaxy s advanced (mine is the brazilian version, here's called S2 lite) from gingerbread to jelly bean 4.1.2, but the cell now is really bad, freezes all the time, and stuff...
I'd like to know how to install a recovery and, then cyanogenmod...
Click to expand...
Click to collapse
For CM10.1 or CM10.2 you don't need custom recovery. Just download correct files (CM zip and gapps) and flash from stock recovery, after you wipe it all.
crawlerx said:
So, I have to download this CoCore? Which one is the right version for me?
CoCore Kernels:
[Samsung Galaxy S Advance GT-I9070(P)]
[EOL]:
[CoCore 4.1Final] [CoCore-mini 1.5] [CoCore-P 1.0]
[LTS]:
[CoCore-E/EP 8.x]
Click to expand...
Click to collapse
Tell us exactly if your phone is I9070 or I9070P. ITS VERY IMPORTANT that info.

[Q] xperia rom v 3.0 on galaxy s advance gt i 9070

hi, I'm new to the forum and congratulations .. sorry my bad english ... I have a samsung galaxy s gt i 9070 advance with jelly bean stock version 4.1.2 xxlpz ... I would like to mount this fantastic rom galaxperia rom v3.0 I wanted to ask that kernel should I use? fits the cocore? thank you very much in advance ...
diabolik1178 said:
hi, I'm new to the forum and congratulations .. sorry my bad english ... I have a samsung galaxy s gt i 9070 advance with jelly bean stock version 4.1.2 xxlpz ... I would like to mount this fantastic rom galaxperia rom v3.0 I wanted to ask that kernel should I use? fits the cocore? thank you very much in advance ...
Click to expand...
Click to collapse
You can use CoCore kernel.
unable to start the phone with the galaxperia rom
phyowaiummg said:
You can use CoCore kernel.
Click to expand...
Click to collapse
hi there i rooted and installed Galaxperia v2 custom rom developed by achyut as instructed from the following thread using cwm
http://forum.xda-developers.com/show....php?t=2206406
the installation went fine and upon rebooting the phone i could only see the sony xperia logo followed by the xperia animation. i waited for nearly 1h and still there wasn't any change in the screen. PS i had cleared my cache and erased all the data prior to the installation. i tried repeating the same steps over and over for some 2-3 days and its still the same. getting stuck in the same screen. kindly help me out with this.
regards,
gokul
s advance i9070
gokulharidas said:
hi there i rooted and installed Galaxperia v2 custom rom developed by achyut as instructed from the following thread using cwm
http://forum.xda-developers.com/show....php?t=2206406
the installation went fine and upon rebooting the phone i could only see the sony xperia logo followed by the xperia animation. i waited for nearly 1h and still there wasn't any change in the screen. PS i had cleared my cache and erased all the data prior to the installation. i tried repeating the same steps over and over for some 2-3 days and its still the same. getting stuck in the same screen. kindly help me out with this.
regards,
gokul
s advance i9070
Click to expand...
Click to collapse
Look in thread on wich stockrom it was based xxlpz
Sent from my GT-I9070 using xda app-developers app

Categories

Resources