Hello everybody, yesterday I was flashing a 5.0 rom and I flashed the gpt.bin, making a hard brick. When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057. Exist any solution for New Moto X, if no, I can replace my motherboard with a new and my cell will work again?
Sorry for the bad English, I`m from Brazil and my Keyboard is a rubbish!!
??
libnijunior said:
Hello everybody, yesterday I was flashing a 5.0 rom and I flashed the gpt.bin, making a hard brick. When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057. Exist any solution for New Moto X, if no, I can replace my motherboard with a new and my cell will work again?
Sorry for the bad English, I`m from Brazil and my Keyboard is a rubbish!!
Click to expand...
Click to collapse
What model Moto X 2014 do you have and is the bootloader unlocked?
Can you get into bootloader mode? Have you tried pressing and holding volume down + volume up + power and holding for about 4 seconds and then releasing?
libnijunior said:
When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057.
Click to expand...
Click to collapse
AFAIK that only works for the Moto X 2013 b/c of the hardware differences.
JulesJam said:
What model Moto X 2014 do you have and is the bootloader unlocked?
Can you get into bootloader mode? Have you tried pressing and holding volume down + volume up + power and holding for about 4 seconds and then releasing?
AFAIK that only works for the Moto X 2013 b/c of the hardware differences.
Click to expand...
Click to collapse
My Moto is the XT1097 Retail BR 32Gb, my bootlaoder is unlocked, but i can`t get into my bootlaoder mode, and pressing the volume down + volume up + power not power up too. I think the only way to get him back to life is replacing the motherboard.
libnijunior said:
My Moto is the XT1097 Retail BR 32Gb, my bootlaoder is unlocked, but i can`t get into my bootlaoder mode, and pressing the volume down + volume up + power not power up too. I think the only way to get him back to life is replacing the motherboard.
Click to expand...
Click to collapse
Have you downloaded Motorola Device Manager to your computer? Does it detect your device when you connect it to your computer?
If MDM does not detect your device and you can't get into bootloader mode, I don't have any suggestions for you.
Are you still in warranty? Can you see about getting a warranty replacement?
---------- Post added at 08:02 PM ---------- Previous post was at 07:59 PM ----------
libnijunior said:
My Moto is the XT1097 Retail BR 32Gb, my bootlaoder is unlocked, but i can`t get into my bootlaoder mode, and pressing the volume down + volume up + power not power up too. I think the only way to get him back to life is replacing the motherboard.
Click to expand...
Click to collapse
Also - if the problem is all software, I believe the device can be relashed by Motorola. It may be cheaper than getting a new motherboard.
I believe they have these devices JTAG that allow them to reflash the bootloader and partition table to the device. A repair shop may be able to do it for you, too. They need to open up the device to do it.
JulesJam said:
Have you downloaded Motorola Device Manager to your computer? Does it detect your device when you connect it to your computer?
If MDM does not detect your device and you can't get into bootloader mode, I don't have any suggestions for you.
Are you still in warranty? Can you see about getting a warranty replacement?
---------- Post added at 08:02 PM ---------- Previous post was at 07:59 PM ----------
Also - if the problem is all software, I believe the device can be relashed by Motorola. It may be cheaper than getting a new motherboard.
I believe they have these devices JTAG that allow them to reflash the bootloader and partition table to the device. A repair shop may be able to do it for you, too. They need to open up the device to do it.
Click to expand...
Click to collapse
I will try to activate my warranty, but if i can`t i will see with motorola Brazil the cost of the repair, because I don`t know what is the price of the repair.
Thanks for the attention!
libnijunior said:
I will try to activate my warranty, but if i can`t i will see with motorola Brazil the cost of the repair, because I don`t know what is the price of the repair.
Thanks for the attention!
Click to expand...
Click to collapse
Definitely get a repair quote from Motorola if they aren't going to cover it under warranty - a local repair shop may be cheaper.
libnijunior said:
Hello everybody, yesterday I was flashing a 5.0 rom and I flashed the gpt.bin, making a hard brick. When I made the same with my moto x 2013, i flashed a blank bootloader, in this thread http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057. Exist any solution for New Moto X, if no, I can replace my motherboard with a new and my cell will work again?
Sorry for the bad English, I`m from Brazil and my Keyboard is a rubbish!!
Click to expand...
Click to collapse
Hey, did you actually succeeded in unbricking Moto x 2013? I followed the same link. Hostage released but no boot up. Any idea or is there anything I am missing? Email is [email protected]
I Missed What I have done
Iorbee said:
Hey, did you actually succeeded in unbricking Moto x 2013? I followed the same link. Hostage released but no boot up. Any idea or is there anything I am missing? Email is [email protected]
Click to expand...
Click to collapse
I have done it a long time ago and I don't remember what exactly I have done, but search in comments of the topic, because some answers you can find into comments.
Files needed for the blankflash on Moto X 2014 are not leaked/released yet...
help-me
not I access fastboot mode on my bike x can help or give a light, I'm open bootloader, root, installed the soak test 5.1 but then went back to when he had 4.4 update OTA he went out and not turn over.
I'm looking at this thread anything happens to the device - http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
@libnijunior
@JulesJam
@JulesJam
ogunja said:
not I access fastboot mode on my bike x can help or give a light, I'm open bootloader, root, installed the soak test 5.1 but then went back to when he had 4.4 update OTA he went out and not turn over.
I'm looking at this thread anything happens to the device - http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
@libnijunior
@JulesJam
@JulesJam
Click to expand...
Click to collapse
Unfortunately, we do not have the blankflash files for the Moto X 2014. They have them for the Moto X 2013 so that is why they can fix their devices.
Can you get a warranty replacement from Motorola? That is the best option if you can get one.
Also, ask motorola to release the files for the 8974 processor. These are the files that we need:
MPRG8974.hex
8974_msimage.bin
(may be named MSM8974.bin or MSM8974_bootloader_singleimage.bin)
You can also ask for the files in this thread: https://forums.motorola.com/posts/b6cb5537f5
Are these the files that are needed?
Hi guys, I'm having the same problem with the xt1097.... searching (a lot) this last 3 days I found this website:
bbs.nubia.cn/thread-416486-1-1.html
In this website is a tutorial to get Z7 max back to life, and curiously (I might be wrong) but works with pretty similar specs as motorola, and actually usess the MSM8974. Hence I' uploading this files that you say. I've alrady tried on my phone but it get stucked with the following in the eMMC Software Downloader app:
Device mode = Sahara on port 10000
server event monitor enabled
path for selected COM port = "_HCD7!dev:0"
server event 1 10000 0 0
Timeout waiting for device
device wait found 0 0
files: mega.nz/#F!wddCjQDb!raPwHpa7bTJHh4mRuJ9nMA
So, Hope this can be helpfull and someone say how to use those files.
Those files won't help. We need the ones for this phone. Files from any other phone will not work.
Sent from my XT1095 using Tapatalk
:/ that's sad. For a minute I had a hope. No choice but to wait a miracle.
I did downgrade to 4.4.4 and updated via OTA for 5.0! The phone died. Not enter into fastboot and only one green LED lights up. Already searched several tutorials a solution to this, but I can not. Already tried using blankflash, also tried using tools for processor and always has an error I do not understand. Please help! :crying:
As of now, there is no way to reflash the bootloader/recover from a hard brick.
Sent from my Moto X 2014 Pure Edition using Tapatalk
We don't have yet the files for blankflash our Moto X 2014.
I opened this thread in motorolaforums to request the files: https://forums.motorola.com/posts/b6cb5537f5
You can post there to push the thread.
Hi. I am trying to repair a friend's phone. The phone is stucked on the motorola logo. I can send mfastboot commands to the phone, but I try to follow guides that I have seen here and the process always get any error. I think it is exactly a soft brick.
How could I repair the phone?
Thanks.
quico14 said:
Hi. I am trying to repair a friend's phone. The phone is stucked on the motorola logo. I can send mfastboot commands to the phone, but I try to follow guides that I have seen here and the process always get any error. I think it is exactly a soft brick.
How could I repair the phone?
Thanks.
Click to expand...
Click to collapse
You can to flash a custom rom, Cyanogenmod?
quico14 said:
Hi. I am trying to repair a friend's phone. The phone is stucked on the motorola logo. I can send mfastboot commands to the phone, but I try to follow guides that I have seen here and the process always get any error. I think it is exactly a soft brick.
How could I repair the phone?
Thanks.
Click to expand...
Click to collapse
quico14 said:
Hi. I am trying to repair a friend's phone. The phone is stucked on the motorola logo. I can send mfastboot commands to the phone, but I try to follow guides that I have seen here and the process always get any error. I think it is exactly a soft brick.
How could I repair the phone?
Thanks.
Click to expand...
Click to collapse
Enviado desde mi Moto G 2014 LTE mediante Tapatalk
Nicoo2016 said:
You can to flash a custom rom, Cyanogenmod?
Enviado desde mi Moto G 2014 LTE mediante Tapatalk
Click to expand...
Click to collapse
Could you put here any guide to follow in order to flash it?
I think I tried some time ago and didn't work.
help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
Slow down...
Give some (as much as possible really) details as to what you've done to end up where you are.
Preferably in a normal non-centered text because what you've done there is hard on the eyes (read: annoying) and almost put me off answering...
Prince_Eugen said:
help pls
i have nexus 6 and it just stuck on fastboot icant unlock bootloader and cant boot recovery i cant flash it even with rsd its not show as motorola device
just adb reinstalled the windows and just put driver for motorola and its read android again
tested the driver with moto e and its work
so how i can recover my device if i cant flash it :crying::crying::crying::crying:
Click to expand...
Click to collapse
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.
zelendel said:
Well as you get the info ready, I will give you some advise. RSD is useless on the nexus 6. It is moto software for moto software and the nexus is is moto in name only.
Also the drivers for the moto E and nexus 6 might not be the same thing. Just because it is a moto doesnt mean anything.
Click to expand...
Click to collapse
ok thaks but what should i do now ?
Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.
Strephon Alkhalikoi said:
Provide details. LOTS of them.
Basically, we need to know what you're attempting to do here.
Click to expand...
Click to collapse
wake up found it stuck in bootloader i didnt do anything
i cant flash rom or do any thing
If you have no ROM, cannot enter recovery, and did nothing to bring this state of affairs about, your phone most likely has a dead EMMC storage chip. You can verify this by trying to flash a stock ROM using the fastboot command, but be aware that attempting to use that Lenovorola program you mentioned could have done significant damage to the device, as that program is not intended for this device.
Should we be able to confirm a dead EMMC chip, there's not that many options available. If you are still under manufacturer warranty you can send the device to Lenovorola for repair at no cost. Otherwise, you'd have to pay for the repair. You could instead purchase a replacement, or purchase a device with a broken screen and swap motherboards (and SIM trays).
My phone unable to turn on after flashing Global rom using MiFlash. At first, I got missmatching devices, then I commented the line to flash the rom. After finished flashing, it show checkpoint error and my phone wont turn on. When pressing power button a few seconds, my computer detect it as Qualcomm HS-USB QDLoader 9008. But it still not turning on. I've tried fastboot devices, but it still can't detect the device.
u mean ur phone isnt showing anything
? Can miflash tool detect it? If yess then press Mi configuration then remove the line present in the checkpoint box
Sent from my Redmi K20 Pro using Tapatalk
it is hardbricked.
now either gp to service center or
edl method is the only way to revive it...but it is risky plus you need authorised account.
Even i thought its hardbricked, but I don't much of knowledge at hard bricking.
Sent from my Redmi K20 Pro using Tapatalk
GouravBaghel said:
Even i thought its hardbricked, but I don't much of knowledge at hard bricking.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
yeah its hardbricked Sadly.
he should have firstly asked in the community about the problem..someone would have guided him.
as long as u arent DEV or the method isnt full proof making changes in stock fastboot rom is risky and ceratinley leads to hardbricked device.
leosinfinity said:
yeah its hardbricked Sadly.
he should have firstly asked in the community about the problem..someone would have guided him.
as long as u arent DEV or the method isnt full proof making changes in stock fastboot rom is risky and ceratinley leads to hardbricked device.
Click to expand...
Click to collapse
Maybe he flashed rom of other vendor or different phone I mean from DaVinci maybe
Sent from my Redmi K20 Pro using Tapatalk