heeelllpppp !!!!!! :crying:
first it was this see the image http://d.tuspics.net/IM13/i/00130/bdg2f3zphcub.jpg and i updated it with RSPL version 3 and now when i boot in to the Bootloader see this image http://d.tuspics.net/IM13/i/00130/dxyxkmfsdebb.jpg now the pc cant detect the phone . plsss any help will be appreciated
Related
Sir
i m new here , i hav got xperia stuck on bootloader ,with hardspl so i tried to flash it with some roms availible here
i sucseeded but set got a problem
it get stuck on bootloader but when i try to boot set after connecting usb cable to pc then set got boot normally,then i tried to flash with 072 stock spl after that set stuck in bootloader saying "continue to upgrade rom please wait...."
& if i try to flash any image through sd card then it shows loading..... On pc it shows "usb device not recognised"
please help me
52 visit & not a single reply
sir please guide me 4 this problem
MANISHJOSHI_BKN said:
sir please guide me 4 this problem
Click to expand...
Click to collapse
If you have successfully flashed HardSPL, I suggest you use the SD Card method rather than using PC method. Be patient when flashing ROM's because some ROM's take time to load. Read this thread, it might help you: http://forum.xda-developers.com/showthread.php?t=445662
I had a similar problem.
I just formatted the SD card again, loaded the Kovsimg.nbh file and flashed. It worked for me!
Had the same problem... just flash the stock spl like u did, then try through usb mode but a stock ROM it'll be a successful flashing
Hi...
I got stuck in bootloader (Tri-Color)screen with KAIS130 SPL-3.29.HArd i`m not able to boot the OS ... I have installed the
Dutty_s_WM6.1_Official_UC_5.2.19199_RTM__nocube with Radio 1.65.16.25,
i did the HardSPL and still i cannot boot the os cause of the bootloader..
Also i`m trying to 'boot' via mtty.exe but it says command error, it responds
only "task 8" but it stops and cannot write nothing else (device reboots in
bootloder mode)... Is there a way to make my kaiser work ? Cannt unlock
cant change the SPL.
http://forum.xda-developers.com/showthread.php?t=354061
http://forum.xda-developers.com/showthread.php?t=334679
http://forum.xda-developers.com/showthread.php?t=354061
all from these links didn`t help me to boot the phone...
Please just inform me what is wrong in with the spl and how can i reflash again.
Best regards,
In Advance
I have bricked my Hera100 when i flashed OS only
its has the following :
IPL 5.04.0001
SPL 5.04.0000
GSM 03.07.90
OS 1.8.0.0
IT HANGS AT STARTUP SHOWING ABOVE DETAILS ONLY . PLEASE ANY ONE HELP PLEASE. THANKS
wHEN I PUT IT IN BOOTLOADER MODE IT SHOW INVALID ID ERROR WHEN I FLASH , ANY CUSTOM ROM BSE I CANT USE HARDSPL SINCE IT STOPS AT BOOT SCREEN. HELP HELP
try flashing with the sd memory method maybe works
i tried the file named RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_ R.exe
although the process finished successfully but my device did not turned on until hard reset then stuck on the boot screen without any response
i get in the bootloader screen saying that
IPL 1.09.0001
SPL 4.10.Ynag
USB
allthough there is the USB indcator at the buttom but when trying to flash the original RUU it did not get the device info as the active sync is not green and the PC cannot identefy a new hardware!?
please could any one help with this situation ASAP
and if i want to restore my ipl to 4.xx
Thanks in advance
Hi
Today I Receive a dead HD7 from a customer.After Repaire Boot with JTAG Phone start and goto Bootloader screen.It Shows SPL-1.23
Now,I cant install any ROM on this set.I try to RSPL and then HSPL but RSPL done ok and HSPL not done.After RSPL and try to install "RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE.exe" Shows "Flash Write" error and phone dead. I repaire Bootloader for the second time and now phone enter in bootloader with SPL-1.23 .Please tell me that how can i install RUU or custom ROM with no error.
Tnx to all.
what does the Bootloader say?