Related
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
bradels said:
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
Click to expand...
Click to collapse
myrobelle said:
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
Click to expand...
Click to collapse
Thats too bad guys,and i m sorry to hear that news.I would like to havean answer but i dont...
The fact is that since most people in this forum use some custom roms,and all of us think the same,that we can always go back,so it would be great if you give some more details about what happened to you,and mybe why it went wrong,and it would be even better if one of the BIG guys would give some explanation about this...
I already thinking of not updating my rom anymore,dot want to end up in looping too,so lets see if someone will find something.Good luck guys..
By the way,i didnt get it right,CWM recovery cannot load your backup????
I just got an idea,but not sure if or how it would work or not.
Since you can push file with ADB,if soeone made a clean backup with his CWM (o e mail,contacts,setting saved) and send it to you,so that you log in with CWM recovery and flash that ???
Just an idea..maybe stupid dont know...
Its not very clear if youve tried this already but cant you just boot into recovery through adb? or does that not work either?
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery
Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....
send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.
Very noobish issue. Rooted, unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck for an hour. Realized that I forgot to reset and wipe all stock settings and cache (yes, I know that should have been obvious step). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom (assuming it was deleted during install or lost, etc). Tried installing a different recovery, but fastboot on PC is unable to find device. Help at this point is very much appreciated, either to do any of the following:
1. Somehow access SafeStrap again (assuming that it wasn't wiped aswell) so I can clear stock settings and cache, get Cyan 10.3 going properly.
2. Instructions/links to another method to otherwise forcibly delete stock settings and cache (please keep in mind, fastboot is currently unable to find device).
3. Otherwise completely clear phone of EVERYTHING, then reinstal stock recovery and or/stock ROM so I can give up on flashing custom and stick with stock.
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Update Motorola drivers on your computer and check threads for fastboot files from skeevydude.
Sent from my MB886 using XDA Premium 4 mobile app
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
http://forum.xda-developers.com/showthread.php?t=2226527
Sent from my MB886 using XDA Premium 4 mobile app
SkunkID said:
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Click to expand...
Click to collapse
The error is from using the wrong fastboot executable. Look at post 5. If you get a stickybit error, search our general forums for "stickybit" and you'll find that fix.
deeje00 said:
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
With a bit of creativitity one could use SSR to dual boot Holo Blur and Batakang....or two custom 4.3's that use the same kernel....PAC + Carbon both with arrrghhh's kernel.....Only problem is ya can't be a noob at all if ya do it.
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
When you're at the "dead Android" screen pressing Vol Down + Power pushes it into recovery, iirc - might seem random but there's a purpose behind it.
SkunkID said:
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
Click to expand...
Click to collapse
Hi, I am having the same issue you had... how the heck were you able to get back into stock recovery? Every time I try my phone just reboots and gets stuck again. I cant even turn off my phone with out it rebooting. I have read your posts and followed that other forum you mentioned but if I cannot boot into recovery and if my computer cant see my phone it wont work. Please help when you get a chance.
Moto X 2014: unrooted with bootloader unlocked. It's running Stock 5.1 and I haven't messed with anything on it. I gave it to my Dad after a few months of using it, so I factory reset it and gave it to him, 2 weeks later he tells me it has stopped working. It boots up normally, but from then on it is black, I can access minor parts of the OS such as the power off menu, the camera (by shaking) and Moto Display, but everything else doesn't work. I have never seen anything like this before, and I am well accustomed to flashing custom ROMs and rooting Android. If it comes down to it I will factory reset it or flash stock, but I can't even plug it into my PC and retrieve any files. Anyone have any idea whats gone wrong?
I have attached a video demonstrating what's happened to help diagnose the problem.
thomaswilloughby said:
Moto X 2014: unrooted with bootloader unlocked. It's running Stock 5.1 and I haven't messed with anything on it. I gave it to my Dad after a few months of using it, so I factory reset it and gave it to him, 2 weeks later he tells me it has stopped working. It boots up normally, but from then on it is black, I can access minor parts of the OS such as the power off menu, the camera (by shaking) and Moto Display, but everything else doesn't work. I have never seen anything like this before, and I am well accustomed to flashing custom ROMs and rooting Android. If it comes down to it I will factory reset it or flash stock, but I can't even plug it into my PC and retrieve any files. Anyone have any idea whats gone wrong?
I have attached a video demonstrating what's happened to help diagnose the problem.
Click to expand...
Click to collapse
If you search the forum here for "black screen" it has happened to other people as well on stock 5.1. Supposedly the fix is a factory reset.
Sent from my XT1095 using Tapatalk
AGISCI said:
If you search the forum here for "black screen" it has happened to other people as well on stock 5.1. Supposedly the fix is a factory reset.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Ok, It was just really surprising thats all. I will factory reset then. Thanks
I am having the exact same issue. Have you had a luck resolving it short of a factory reset?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a few people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?
bjg222 said:
I am having the exact same issue. Have you had a luck resolving it short of a factory reset?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a few people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?
Click to expand...
Click to collapse
Unfortunately I couldn't retreive any data from the phone, I can confirm however that a factory reset does fix the issue. The Android automatic backup does work in the broken state so I did manage to restore my settings and apps. But the internal sd card was wiped upon factory reseting. Just an idea of the top of my head: Try running adb backup and see if that works, and then unlocking the bootloader, flashing twrp, restoring the backup, and finally transfering the internal sd card data to a mounted drive using twrp. Thats just a stab in the dark and i dont have the phone on me to test it. Give it a try and lets hope Motorola will fix this bug soon.
Ok, thanks. I did try adb backup, but adb won't recognize the device when it's "booted" & sitting at the blank screen, and the stock recovery doesn't give full adb access. I'm currently looking into the various data recovery options to maybe pull some stuff off after reseting. It's really only a few files that I need, so maybe that will work?
bjg222 said:
Ok, thanks. I did try adb backup, but adb won't recognize the device when it's "booted" & sitting at the blank screen, and the stock recovery doesn't give full adb access. I'm currently looking into the various data recovery options to maybe pull some stuff off after reseting. It's really only a few files that I need, so maybe that will work?
Click to expand...
Click to collapse
Unfortunately the internal SD card mounts using MTP and not like a flash drive, so using the usual methods through Windows to recover wont work. However you could try and restore your internal sd card using this solution: http://goo.gl/OKdV14
As for accessing adb through recovery, you could try this method: http://goo.gl/5T7bhq
Hopefully one of these methods should work, so you can at least recover some of your files.
I had the same problem today. I tried to backup a twrp backup I have made few weeks ago but I still had the black screen. The only solution is to factory reset...
Happily I could have saved my data when I was on TWRP. Anyone knows how to restore sms from the data I have saved ?
My S6 edge is in a bootloop. I put off the 5.1.1 OTA for a while when my wifi would not turn on. Rebooted, still didnt work. I decided to do the update. installation went great but now its in a boot loop. I flashed the firmware (BOG7) using Odin. It worked. The phone was back on again but then it shut off after a few hours.
Its been stuck in the bootloop again. I flashed BOG7 again. Ive Flashed BOG9. Ive flashed the stock PIT. Ive tried ADB sideload. Smartswitch and Kies do not recognize the device. Of course, Ive wiped cache and factory reset. Attempted booting in safemode. All flashes were successful but when it reboots, It says "erasing" and goes to bootloop (Samsung powered by android).... Drivers are installed and working. MTP is not installed and I cant find the file.
Please .
same problem
I'm having the same problem with boot loop on g925v stock. I'm wondering if the op or anyone else can help!
No mater what I do, phone reboots after almost exactly 1min9 sec. Just enough time to select a language, but not get past the next "activation" screen.
Background: Phone has never been rooted, at first was on og5 and started freezing on the verizon logo, so I factory data reset, and after that nothing has really changed. knox has not been tripped, frp not tripped
First I tried flashing og5 with odin,
(of course checked md5, and odin=pass, then after flashing, I always tried several combinations of booting to recovery for wipe cache partition/ factory reset / and also power down by holding volume down and power button, then select boot in safe mode)
Then tried flashing og7, still boot loop
then tried flashing og9, 3 times, again, also many attempts of factory data reset/ wipe cache partition / safe mode.
I am starting to think this may be a hardware problem, BUT unfortunately I do not have samsung warranty available on this phone so I am pretty much stuck messing with it.
In researching the issue, I have run across quite a few similar freeze/boot loop problems all over the web, and never any real solutions, for both g925v, g920v, and other s6 models. I've also seen a stock s6 g920v that freezes randomly, flashing stock og9 never helped, owner was planning to replace the battery and see if that helps (I have not heard back).
I've tried looking at the boot log but I'm no expert. I know I can't downgrade, but I'm wondering if there is anything I can do with adb, or any other bootloaders that I could try flashing over the og9 (even if just temporarily, assuming I will flash stock og9 again after).
Thanks for any encouragement, help or advice.
I finally gave up on my GS6 Edge because upon carefully taking it apart for the 3rd time I noticed physical damage up by the wifi receiver and SIM card slot. My advice would be to try the things I tried (above) and, if it's not a hardware issue, it may fix the problem. Good luck.
beefriendly said:
I'm having the same problem with boot loop on g925v stock. I'm wondering if the op or anyone else can help!
No mater what I do, phone reboots after almost exactly 1min9 sec. Just enough time to select a language, but not get past the next "activation" screen.
Background: Phone has never been rooted, at first was on og5 and started freezing on the verizon logo, so I factory data reset, and after that nothing has really changed. knox has not been tripped, frp not tripped
First I tried flashing og5 with odin,
(of course checked md5, and odin=pass, then after flashing, I always tried several combinations of booting to recovery for wipe cache partition/ factory reset / and also power down by holding volume down and power button, then select boot in safe mode)
Then tried flashing og7, still boot loop
then tried flashing og9, 3 times, again, also many attempts of factory data reset/ wipe cache partition / safe mode.
I am starting to think this may be a hardware problem, BUT unfortunately I do not have samsung warranty available on this phone so I am pretty much stuck messing with it.
In researching the issue, I have run across quite a few similar freeze/boot loop problems all over the web, and never any real solutions, for both g925v, g920v, and other s6 models. I've also seen a stock s6 g920v that freezes randomly, flashing stock og9 never helped, owner was planning to replace the battery and see if that helps (I have not heard back).
I've tried looking at the boot log but I'm no expert. I know I can't downgrade, but I'm wondering if there is anything I can do with adb, or any other bootloaders that I could try flashing over the og9 (even if just temporarily, assuming I will flash stock og9 again after).
Thanks for any encouragement, help or advice.
Click to expand...
Click to collapse