after i installed cm 11 (4.4.1) FXP303-cm-11-20140120-UNOFFICIAL-huashan
OTG doesn't work for any usb flash either it formatted fat 32 or Ntfs
i did partition wipe but didn't install gapps
is anyone have same problem or know what to do ?
after troubleshooting found that all cm have bug of not outing volt to usb so any usb connected with original otg cable won't work
there is 2 way to use otg ;
1-buy ((Y)) OTG cable
2-use stock rom or any modified stock rom
thank you
Related
I have an OTG cable, specifically for the P1000, and a simple USB stick will not mount.
I also am trying to mount a USB 3 drive, so not sure if that won't work because of drivers or lack-thereof.
I have a y-cable for the USB 3 drive, and it still will not mount.
I have Cyanogenmod 10.1 running Android 4.2.2
Any suggestions?
TehFonz said:
I have an OTG cable, specifically for the P1000, and a simple USB stick will not mount.
I also am trying to mount a USB 3 drive, so not sure if that won't work because of drivers or lack-thereof.
I have a y-cable for the USB 3 drive, and it still will not mount.
I have Cyanogenmod 10.1 running Android 4.2.2
Any suggestions?
Click to expand...
Click to collapse
Anyone able to help? I'd really appreciate it.
Me too have same problem....
Hello, today i have upgrade my phone, i download the last version of cm (cm11 03/04/2014) downloaded from maclaw.pl and upgrade it!
Today i've buy an otg cable from amazon..
I plug in the cable but it appears anything... (Sorry for my bad english)
I have used:
StickMount > Not Work
USB OTG Helper > Not Work
Drive:
16gb Corsair Survivor FAT32 > Not Work
8gb FAT32 > Not Work
4gb FAT32 > Not Work
It seems that when I insert the pen drive has no current, because the LEDs do not light up!
I have the CWM Recovery but I can't remember which kernel i use... maybe the original!
Thanks a lot!
OTG
DjsantiX said:
Hello, today i have upgrade my phone, i download the last version of cm (cm11 03/04/2014) downloaded from maclaw.pl and upgrade it!
Today i've buy an otg cable from amazon..
I plug in the cable but it appears anything... (Sorry for my bad english)
I have used:
StickMount > Not Work
USB OTG Helper > Not Work
Drive:
16gb Corsair Survivor FAT32 > Not Work
8gb FAT32 > Not Work
4gb FAT32 > Not Work
It seems that when I insert the pen drive has no current, because the LEDs do not light up!
I have the CWM Recovery but I can't remember which kernel i use... maybe the original!
Thanks a lot!
Click to expand...
Click to collapse
Hey men, OTG is not working yet on cm11, maybe Maclaw culd add that feature in the future, stay up-date with the new
you can see then on maclaw.pl
any kernell, or something to get it work, usb otg?
thx
root
overon37 said:
any kernell, or something to get it work, usb otg?
thx
Click to expand...
Click to collapse
Stickmount
OTG works out of the box. I've used a USB audio adapter, a USB ethernet adapter, and a USB memory stick.
I had to install another app to mount the USB storage though. I used Nexus Media Importer; works a treat.
perfect, thx everybody.
Waitting for a kernell that will be able to work with usb otg without any app, but now with root no problems
Because neither USB cable nor (Pendrive micro USB) doesn't work.
Of course it's about original stock ROM (rooted with TheDreamer Kernel) as only this we could have for 64bit version so far...
Hi Everyone! I had istalled Havoc Os on my Mi pad 4 plus, with lr twrp -3.2.2 -0711 . I wanted to change it to lineage Os so formatted all the data.
It was not recognising usb for tranfer or otg or adb fastboot despite changing to developer settings and enabling usb debugging, probably restrictions from Havoc Os or lr team recovery mode before wiping of the Havoc Os.
Now after wiping off existing rom there is no rom or data. Just lr twrp 3.2.2 -0711 now and fastboot logo.
I am unable to connect via adb fast boot nor is it recognising usb OTG or micro sd card.
How do I now flash a new custom rom? Since it simply doesn't recognise my device on pc or inputs from usb or micro sd. I can check the terminal in twrp. Can I use twrp terminal commands to check edit any files to enable usb debugging or usb recognition or enabling MTP?
I don't think the usb port or hardware of mi pad 4plus has a fault because it can charge and micro sd card was earlier working.
Looking forward to guidance from fellow users and developers. Thanks!
repaired
superninja619 said:
Hi Everyone! I had istalled Havoc Os on my Mi pad 4 plus, with lr twrp -3.2.2 -0711 . I wanted to change it to lineage Os so formatted all the data.
It was not recognising usb for tranfer or otg or adb fastboot despite changing to developer settings and enabling usb debugging, probably restrictions from Havoc Os or lr team recovery mode before wiping of the Havoc Os.
Now after wiping off existing rom there is no rom or data. Just lr twrp 3.2.2 -0711 now and fastboot logo.
I am unable to connect via adb fast boot nor is it recognising usb OTG or micro sd card.
How do I now flash a new custom rom? Since it simply doesn't recognise my device on pc or inputs from usb or micro sd. I can check the terminal in twrp. Can I use twrp terminal commands to check edit any files to enable usb debugging or usb recognition or enabling MTP?
I don't think the usb port or hardware of mi pad 4plus has a fault because it can charge and micro sd card was earlier working.
Looking forward to guidance from fellow users and developers. Thanks!
Click to expand...
Click to collapse
same here on my mipad4plus, but I don't know is it because of Havoc OS (I'd installed before)
Anwyay I can use external sd card to flash custom rom by the recovery