[Q] Trouble Installing ICS on X8.[SOLVED] - XPERIA X8 Q&A, Help & Troubleshooting

Hey guys, I've been browsing xda for a couple months and now I decided to create an account since I've met a problem I can't overcome and I think I could use some help of the members in here.
So what I am trying to do is install the ICS kernel to my X8 and then install the CMD Rom, but everytime I stuck in bootloop after I install the nAa kernel.
The steps I followed are
Root The Phone
Install x8 Drivers
Unlock the bootloader
Flash nAa Kernel
But after flashing the nAa kernel it just stucks in the Sony Ericsson logo and I have to remove the battery to reboot the phone, I managed to recover it by flashing a stock rom and I tried again installing a different nAa version but still no luck. I also tried wiping data & cache & delvik cache as I read in some threads that may helped but still nothing.
I am kinda new to flashing new roms on devices so I don't know I followed the steps correctly. I also used the search function and found some threads that helped me unbrick the phone back to stock rom, but I can't install the nAa kernel.
Any help would be really appreciated since the x8 device is a friend of mine and I would like to return fully fuctionable.
Thanks for taking your time to read the post and help me out with my problem!.
Links I used
http://forum.xda-developers.com/showthread.php?t=1254225
http://forum.xda-developers.com/showthread.php?p=24304432
http://forum.xda-developers.com/showthread.php?t=1836116

Looks like your bl is still locked. Can you tell us what it says when you try flashing the kernel? What does s1tool say? 015 baseband?
Read the first post carefully before trying to unlock bl: http://forum.xda-developers.com/showthread.php?p=17378137 (that's one of your links, i think)
Also make sure the manufacturing date it below 11w29. You should not see the se logo once you've successfully unlocked your bootloader.

SkoutiOP said:
Hey guys, I've been browsing xda for a couple months and now I decided to create an account since I've met a problem I can't overcome and I think I could use some help of the members in here.
So what I am trying to do is install the ICS kernel to my X8 and then install the CMD Rom, but everytime I stuck in bootloop after I install the nAa kernel.
The steps I followed are
Root The Phone
Install x8 Drivers
Unlock the bootloader
Flash nAa Kernel
But after flashing the nAa kernel it just stucks in the Sony Ericsson logo and I have to remove the battery to reboot the phone, I managed to recover it by flashing a stock rom and I tried again installing a different nAa version but still no luck. I also tried wiping data & cache & delvik cache as I read in some threads that may helped but still nothing.
I am kinda new to flashing new roms on devices so I don't know I followed the steps correctly. I also used the search function and found some threads that helped me unbrick the phone back to stock rom, but I can't install the nAa kernel.
Any help would be really appreciated since the x8 device is a friend of mine and I would like to return fully fuctionable.
Thanks for taking your time to read the post and help me out with my problem!.
Links I used
http://forum.xda-developers.com/showthread.php?t=1254225
http://forum.xda-developers.com/showthread.php?p=24304432
http://forum.xda-developers.com/showthread.php?t=1836116
Click to expand...
Click to collapse
Sony Ericsson logo should not appear after flashing naa kernel , this means you could not flash the kernel correctly .
try to flash kernel for two or three times , sometimes it doesnt work and you should try again.
notes: if you see naa logo then sony logo this means youve successfully installed kernel and all you have to do is to flash a rom from recovery menu.(when you turn x8 on and naa logo appears,you should start pressing back button to enter revovery)
- use compatible rom and kernels
Sent from my E15i using Tapatalk 2

cascabel said:
Looks like your bl is still locked. Can you tell us what it says when you try flashing the kernel? What does s1tool say? 015 baseband?
Read the first post carefully before trying to unlock bl: http://forum.xda-developers.com/showthread.php?p=17378137 (that's one of your links, i think)
Also make sure the manufacturing date it below 11w29. You should not see the se logo once you've successfully unlocked your bootloader.
Click to expand...
Click to collapse
That's the guide I used to unlock my BL.
Manufacturing date is 11w12 so I guess that's fine. Also I am sure the bootloader is unlocked because I am getting a small "r" when I am using the s1tool. Maybe I should flash stock rom wipe cache & data and try flashing the nAa kernel?

SkoutiOP said:
That's the guide I used to unlock my BL.
Manufacturing date is 11w12 so I guess that's fine. Also I am sure the bootloader is unlocked because I am getting a small "r" when I am using the s1tool. Maybe I should flash stock rom wipe cache & data and try flashing the nAa kernel?
Click to expand...
Click to collapse
Problem solved. What I was doing wrong was trying to flash the rom over the nAa kernel I read the FAQ thread from the nAa kernel thread and found the solution.

Related

[Q] Stucks after flashing or installing ROM.

I flashed the latest official firmware...
Than after all my attempts i can't install any ROM, except official 2.1.
Please, write me instructions how to install CM7 - i need help...
I have rooted 2.1 with xRecovery - what's next?
Go to xrecrovery choose instal custom zip from sd card hoose zip from sd card find your mini cm 7 install rom and factory reset/full wipe.
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Bolussimo said:
It depends on ROM. Some of CM7 works only on custom kernels, so You should first check if You will be able to unlock bootloader. Look behind Your battery - on the stick there should be something like xxWyy which will tell You the year and the week of Your board. If it's older than 11W26 (26th week of 2011) - U may unlock bootloader and install custom kernel (on Your own risk ;P). If not - You shouldn't do this and search for ROMs working on SE stock kernel
Click to expand...
Click to collapse
Also, some ROM required CWM instead of Xrecovery, so read carefully before attempting anything.
Hmmmm
I unlocked bootloader long time ago(10WW48 on the sticker).
to przemek4113: Just installing from xrecovery gives me a unbooting phone.
I tried Froyo, but it doesn't boot too.
Then i'm flashing(Xrecovery doesn't give me a booting phone even if i recover all system) official 2.1.
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
May be try Previous versions of GingerDX?
Really, i tried about seven customs...
P.S. I'm installing xrecovery ROM's from Xrecovery and CWM ROM's from CWM...
BEaStia said:
This phone was bought with GinderDX on it. But latest versions need new kernels(flashing kernel bricks phone).
Click to expand...
Click to collapse
Mind to elaborate where you read that "latest versions need new kernels"?
GingerDX runs on STOCK KERNEL, LinuxDX as well as Alfs. I fail to find the part in doixanh's post where it says something about forcing a certain kernel to be used.
Make sure you have an older x8 than 11w29, its under the battery. When the number is 11w29 or newer, you'll not get CM. Unlock your bootloader.
Download and flash FXP kernel. Install official CM with the kernel built-in CWM. I recommend to flash nAa kernel after install the CM, it's much better.
Sent from my E15i using xda premium
If you want CM7 you should go to this thread...http://forum.xda-developers.com/showthread.php?t=1362585
That's my fault - i was speaking about another ROM. Not GingerDX - but it doesn't boot too.
I followed advise about miniCM7.
Flashed kernel ->then wiped all(i disliked the message about ext4 - there's no this partition - probably that's the problem???) ->installed ROM. Nothing.
"nAa kernel" logo appears and then it reboots.
UPD:
I've installed GingerXperia(v19) via CWM.
Then -
I've flashed all kernel,fota and smth else(not all files from 2.1.1).
Then it booted...strange)
But i'll try to work with other kernels...
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
sreeramllb said:
hi
i had rooted my w8 with super1click installed xrecovery and with it gingerxperia v22.today i installed v24b and rebooted.then installed chargemon zip.but after this my phone stuck at se logo ...its not even shutting down so no xrecovery or pc companion working...somebody pls help...
Click to expand...
Click to collapse
Probably:
1)make a backup of all data
2)flash stock kernel
2.5)wipe
3)install custom
3.5)wipe
4)recover data
?
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
sreeramllb said:
1.As my phone is not booting can't take back up but i have previous back up with me
2,how can i flash stock kernel ?is it with flash tool?
Click to expand...
Click to collapse
Flash Tool - I've seen links on it thousand times on 4pda.ru, but not here - i suppose it to be in the branch about X10.
http://www.mediafire.com/?z7fmpiragbbdxdu - here is flasher.
http://depositfiles.com/files/c2gllgt6t - or here, with official firmware
It would be great if somebody could provide the step by step procedure of flashing my w8 to get past the se logo....
1)Download all archives above
2)Run flasher
3)Press "Flash" and choose necessary firmware
4)follow advices of software
5)reboot -> You have official 2.1
then
1)check your bootloader(http://4pda.ru/forum/dl/post/1227710/S1tool.7z) with this tool
2)unlock it if it is able for you
3)take root(superoneclick with debugging)
4)make xrecovery
5)install any xrecovery zip
or
alt 5)make CWM
alt 6)install any CWM zip
or
install kernel
then install zip
Firstly try it from xrecovery. If you have some problems - write PM to me)
I have done it and successfully flashed as per flashtool...but now even i cant boot stuck at "sony ericsson" now the animated logo works and reboots automatically...pls help
Have you done "user-wipe" in Flash Tool???
Here is from friendly branchcontains a collection of GingerDX 013-022 and some other goodies in the "Sony Ericsson" folder - i.e. Basebands, PCC, SEUS, Flashtool)
http://www.mediafire.com/?eca0sualnao4c4c
Thanks to B.Jay
Atlast with full user data wipe in flash tool I recoverd my phone...THANKS A LOT!!!
Again rooted,Xrecovery and installed GX V24b-I would like to know how to enable multi touch in it please?
How to make xperia x8 able multi touch.
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
chehady said:
i want to know what i have to do to make xperia x8 able multi touch(im using gingerxperia v23 on my x8)...can anybody help me plz..i appreciate your help...
:-D
Click to expand...
Click to collapse
Ok here is a nice way how to enable it hope it helps you
http://forum.xda-developers.com/showthread.php?t=1135965
Sent from my E15i using XDA App

[Q] Bootloop with nAa10 on X8/E15i [SOLVED!]

Hi!
I had a problem with my smart (if you call me, it reboot, something reboot automatically). I was using GingerDX v21 and v22. I downgraded to 2.1 via PC Companion but doesn't works.
So, I decided to use MiniCM7. I followed this tuto http://forum.xda-developers.com/showthread.php?t=1068553 and the bootloader unlock tuto too http://forum.xda-developers.com/showthread.php?t=1254225
Well, I did everything correctly, I guess. I see the nAa logo when I turn on my smart and I can enter in CWM-Recovery.
I have installed the MiniCM7-2.1.8-shakira, MiniCM7-2.1.7-shakira, MiniCM7-2.1.6-X8, GingerXperiaRay_V004 and PrimeHD20 but I can't pass of boot (bootlooping).
I don't know if I did something wrong. I had instaled too E15_nAa-09_2.6.29.6-nAa-09 and E15_nAa-06b_2.6.29.6-nAa-06b (first I tried v10). I everytime wipe all data.
If I install the original kernel and rom it works normally. I don't know what I can do. I do the same process three times, wiping all, installing, etc. and nothing!
What I'm doing wrong? There are some possibilities of my smart don't support it?
read this first http://forum.xda-developers.com/showthread.php?t=1011071 to go back to 2.1...
then root, install xrecovery,unlock bootloader,flash nAa kernel you need ,and then
install MiniCM7...
try this method
1.root
2.unlock bootloader
3.flash nAa v10
4.then your phone will have CWM and flash the rom minicm7.218
5.flash google gapps gb
6.reboot and see it bootloop or not??
Sent from my E15i using xda premium
Thanks for all replies.
Well, I did the @kostas_grevena3 method, but I'll do again. Maybe I forget to apply baseband 015! :O Hum...
What I'm doing now:
1. Flashing: Flashtool + X8 Shakira E15i_2.1.1.A.0.6_generic.ftf (success!)
2. Flashing: Flashtool + X8i_2.1.1.A.0.6_Baseband_015.ftf (success!)
3. Drivers yet installed from last tries. (success!)
4. Flashing: Flashtool + E15_nAa-10_2.6.29.6-nAa-10.ftf (success!)
5. Turn on smart, CWM and wipe all (success!)
6. Flashing: CWM + MiniCM7-2.1.8-shakira.zip (success!)
7. Flashing: CWM + gapps-gb-20110828-signed.zip (success!)
8. Rebooting for first time and...
MOTHER
OF
ANDROID!
Thanks you guys!
Feeling like a hacker now haha jk jk
Thanks!
try this.
1. boot in recovery
2. Factury Reset
3. mount/storage format system and sdext if you had an ext partiton
4. flash cm7 rom
5. boot now first complete to rom
6. Reboot to Recovery
7. Now you flash gapps
will it work now?
i remeber an error with odexed roms when i flash another zip before i boot in rom.
edit: oh sorry i see it sloved haha, have fun with your new x8
david.proweb said:
Thanks for all replies.
Well, I did the @kostas_grevena3 method, but I'll do again. Maybe I forget to apply baseband 015! :O Hum...
What I'm doing now:
1. Flashing: Flashtool + X8 Shakira E15i_2.1.1.A.0.6_generic.ftf (success!)
2. Flashing: Flashtool + X8i_2.1.1.A.0.6_Baseband_015.ftf (success!)
3. Drivers yet installed from last tries. (success!)
4. Flashing: Flashtool + E15_nAa-10_2.6.29.6-nAa-10.ftf (success!)
5. Turn on smart, CWM and wipe all (success!)
6. Flashing: CWM + MiniCM7-2.1.8-shakira.zip (success!)
7. Flashing: CWM + gapps-gb-20110828-signed.zip (success!)
8. Rebooting for first time and...
MOTHER
OF
ANDROID!
Thanks you guys!
Feeling like a hacker now haha jk jk
Thanks!
Click to expand...
Click to collapse
is this working?
First of all i would like to thanks all the Developers for their Incredible work on this site. I am using this site for a long time it helped me in solving many issues. I flashed many Custom ROMS on My X8 & X10 never had big issues so there was no need to post just becuase there was already so much of information here. But from last 4 days i am messing with my X8 when i tried flashing Jelly Bean Rom. Previously i was using 2.3.7 in my x8.I cant say i am very good but i am not new to these Roms. I actually searched alot but failed so i am here for help. In order to use Jelly Bean my x8 is having Bootloop issue. I follow all the instructions from http://forum.xda-developers.com/showthread.php?t=1789713 regarding Kernel http://forum.xda-developers.com/showthread.php?t=2136211. I follow each guidelines but still Bootloop . Not only that i cant use any other custom rom now everytime bootloop. SESU repair my phone but i cant use 2.1 now after using custom roms in x8 for longtime, It feels pathetic Now i dnt want Jelly Bean in x8 anymore i ll be more than happy if i get 2.3.7 back :angel:
I tried different Roms , Kernels but everytime same result "Bootloop"
Rooting fine, Flashing Kernel fine,, Rom instalation fine. Had doubt regarding Unlocking Bootloader ( Whether its properly unlocked or not). so Flashtool says Its "unlocked" but it also said it cant be "unlocked officially". So i tried another way to with s1 tools from this link http://forum.xda-developers.com/showpost.php?p=23680742&postcount=1 and r is smaller too RUNNING S1_EROM VER "r8A029". Now i am really confuse. tired and fed up 4 days GingerXperia, JellyBread.Jelly Bean everything failed
But i want to add 1 thing which is related to BLU because i cant dial *#*#7378423#*#* service menu from my x8 is that the clue or issue. Plz members help me out. Thanks in Advance.
Please Help
Damn ..
I have tried many times with naa kernel to flash rooms, but stuck in bootlop.
After I found this tread, flashed baseband 15 (I have selected only baseband to flash), flashed again nAa kernel and then custom ROM and phone is working.
Thanks

[Q] Afeter unlock bootloader i can´t run any ROM....helP!!!

X8 ....After unlocking bootloader it went out of SIM signal....imanage to solve this problem.
But i have a mayor problem: I`ve tried to install GingerDx, PrimeHD, MiniCM9, on Sock and Custom Kernels and it always stuks at booting.
Before unlocking bootloader stock kernel ROMs were runnig all right, even PrimeHD 7.0 with nAa 11 worked but not anymore.
Anyone knows what is happening, should i relock and unlock it again?
did you fill wipe? you need to flash kernel, install rom and full wipe
fifo171 said:
did you fill wipe? you need to flash kernel, install rom and full wipe
Click to expand...
Click to collapse
Yes...full wipe= Done...but doesn`t work after full wipping.
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
8cpaiw said:
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
Click to expand...
Click to collapse
Yes, i`ve done this!!!....The same happens to me with U20 nAa kernel....
I`ve donde exactly what you describe above but i still couldn`t install custom Roms.....pretty weird
Flesh phone with seus and do same procedures again
Sent from my E15i using xda premium
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
8cpaiw said:
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
Click to expand...
Click to collapse
I`ve donde this.....i don`t know how.
I will try all again.
which combination of rom and kernel did you try? try nAa kernel (not the ics one) and MiniCM7 rom
can you make a video and show us your problem?
I finally solve it!!!
Idon`t know how but i repeat the same procedure time after time and i can finally instal GingerDx v025 in Stock kernel.
Thanks to everyone that helped me!!!

[Q] Stuck at kernel logo. Nothing is working.

Good afternoon,
I'm sorry i'm creating a new thread about an old subject, but i just can't get my X8 to work with custom kernel+rom. I've searched the forum for the same issue but none of the solutions described worked. Until this moment i had to use PCC to flash my smartphone back to normal about 10 times and it's starting to get very annoying. I've followed the devs instructions on all procedures thoroughly, rooting, bootlader unlock, flashing kernel and installing ROM, and it always gets stuck on the kernel logo wether is it before or after flashing the rom (unless i press the back button). To this moment, i've tried nAa-14 and alfs v09 kernel, GingerDX and Zaraki roms, followed guides step by step. I'm a newbie in the smartphones area but not when it comes to computers. Throughout my 'voyage' i had a number of bumps i had to overcome, like having the installation aborted (bad) error when trying to install a rom, which i solved by downloading the zip directly to the SDcard like described here in the forums. GGdrivers are installed, and so are the SE USB drivers, phone is recognized by PCC with no problems.
I honestly have no idea what might be wrong, and as i said, i've done a search before creating a new thread but nothing helped, or maybe i'm just missing a tiny detail. I would really like the help since this is my first smartphone and i would like to play with my new toy!
Thanks and sorry for any inconvenience.
EDIT: I forgot something. In the kernel installation guide is requested that after flashing it, to check in the phone settings if everything is ok. I can't even boot the phone after flashing the kernel (gets stuck on kernel logo) which means my problem is related to something previous to it? Maybe bootlock? I'm pretty sure i'm doing what's required.
Appreciate the fast answer.
I get stuck on the logo wether is it before or after flashing the rom. The only way i don't get stuck is to press the back button to boot into cwm.
Yes i've tried to wipe after and before, and it didn't work. And these were the only roms and kernels i've tried.
There's no problem with hardbricking my device by the way, 11w03.
I'll have to get out for a while, but i will come back later to check all the answers, this is a priority for me at the moment
emaz1ng said:
Appreciate the fast answer.
I get stuck on the logo wether is it before or after flashing the rom. The only way i don't get stuck is to press the back button to boot into cwm.
Yes i've tried to wipe after and before, and it didn't work. And these were the only roms and kernels i've tried.
There's no problem with hardbricking my device by the way, 11w03.
I'll have to get out for a while, but i will come back later to check all the answers, this is a priority for me at the moment
Click to expand...
Click to collapse
Don't full wipe two times,either before or after,you can see this at the rom thread.
One basic detail that many forget is that you must have baseband that lasts to 15,so it would be like this xxx015
Sent from my X8 using xda premium
I didnt full wipe when trying gingerdx, as you said its not requested, only wiped with zaraki. I can confirm my baseband is xxxx015.
Sent from my E15i using xda app-developers app
emaz1ng said:
I didnt full wipe when trying gingerdx, as you said its not requested, only wiped with zaraki. I can confirm my baseband is xxxx015.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
You have to full wipe,don't full wipe two times,gingerdx needs full wipe before installing the rom....
Sent from my X8 using xda premium
I tried again using the correct wiping method for gingerdx and it still freezes on kernel logo. the weird thing is that it freezes the first time it boots after flashing the kernel, meaning it has nothing to do with the rom, right? and maybe even not related to the kernel itself. i'm completely clueless about this, i wish i had a friend who could do it for me, because i can't detect anything done wrong.
What version of cwm are you using?
Sent from my X8 using xda premium
i'm not quite sure what's the version of cwm since it installs itself along with nAa-14 kernel, but i think it was v5.0.2.8
IAmNice said:
I think its the cwm that comes with the kernel.
For the OP. No idea what to do. You have a weird problem
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
please don't destroy my hopes of having a working custom rom on my phone jokes aside, i get your point, but doesn't it seem not logical that i'm the only one who can't get it to work? it's weird enough i can't boot my phone after flashing the kernel....
i could post a video, sure, but it's pretty straightforward. after i flash the kernel, unplug the phone from PC and boot it up, IF i don't boot into cwm, it will freeze on the kernel logo, making it impossible to even check the phone settings as requested in gingerdx thread. AFTER i install the rom and reboot the phone, it will still show the kernel logo and freeze again (if i understand correctly this is not supposed to happen, what's supposed to show on the screen after the rom is installed are the normal SE logos.)
So, summing up. Flash kernel, turn phone on, freezes on kernel logo if i don't use back button to go into cwm. If i enter cwm, install rom from sdcard, reboot, it shows the kernel logo and freezes if i don't use back button again.
Don't know if it helps but the only way to turn the phone off when it freezes is removing the battery. Sometimes after placing the battery again it will automatically turn on.
Dunno what's wrong,why don't you try with stock kernel and gdx,or why don't you try different rom(yea neither gdx nor gzr)
Sent from my X8 using xda premium
you mean formatting partitions after flashing the kernel or before? i assume there's an option for it under cwm?
stamatis16 said:
Dunno what's wrong,why don't you try with stock kernel and gdx,or why don't you try different rom(yea neither gdx nor gzr)
Sent from my X8 using xda premium
Click to expand...
Click to collapse
sure i can try other roms, but the fact that it freezes before installing the rom seems to point towards another problem?
the phone was bought in 2nd hand by the way, maybe there's something that could have happen before it got to me?
You have to format the partitions after flashing the kernel. In CWM recovery, go to 'mounts and storage' and format all the partitions except /sdcard.
feherneoh said:
Try to format all of the partitions (yes, ALL of them), then install ROM again.
After installation turn off the phone, take out the card, then turn phone on.
I hope it will work.
Click to expand...
Click to collapse
Lajbymester said:
You have to format the partitions after flashing the kernel. In CWM recovery, go to 'mounts and storage' and format all the partitions except /sdcard.
Click to expand...
Click to collapse
Just did it and the same thing happened. Flashed nAa-14, booted into cwm, full wipe, full cache wipe, wiped all the partitions but sdcard, installed rom, rebooted and it froze on the logo. Tried again with removing the sdcard and turning the phone on, froze on logo. Flashing it back to stock using PCC atm
By the way, it didn't let me format sd/ext.
Have you tryed with older version of naa? Naa 14 is buggy, naa 11 is the best
Sent from my p970 using xda premium
emaz1ng said:
Just did it and the same thing happened. Flashed nAa-14, booted into cwm, full wipe, full cache wipe, wiped all the partitions but sdcard, installed rom, rebooted and it froze on the logo. Tried again with removing the sdcard and turning the phone on, froze on logo. Flashing it back to stock using PCC atm
By the way, it didn't let me format sd/ext.
Click to expand...
Click to collapse
Try some other roms like minicm7. Do it in this order
Flash the kernel
Boot to cwm
Format system,data,cache
Fullwipe/Factory reset
Install Rom
Reboot
....wait .....
I do this every time i install a new rom..
Make sure The rom you have downloaded belongs to x8..
ElmirBuljubasic said:
Have you tryed with older version of naa? Naa 14 is buggy, naa 11 is the best
Sent from my p970 using xda premium
Click to expand...
Click to collapse
I will do that right away. I will also download a few others roms (and respective kernels) and try them all out. Only one thing, I was going to download MiniCM10 and i saw this in its post: "MiniCM10 is an unofficial port of CyanogenMod 10 for the SEMC msm7x27 devices." What does it mean 'for the SEMC msm7x27 devices'? Is it related to bootload unlock? Because i get Setool2 Certificate instead of SEMC. Does this make my problem a little easier?
EDIT: Ok, i've just tried ICZaraki+nAa-04-ics, minicm10+nAa-jb, gingerdx/gingerzaraki+nAa 11, and guess what, none worked.... We have to start thinking this is not related with the kernel or rom maybe? Any suggestions? When i tried the nAa-11 kernel, when i booted up the phone a white led popped up instead of a green one. I'm not worried if this takes a whole month to fix, i'm up for any suggestions and ideas of any kind, just throw them at me.
emaz1ng said:
I will do that right away. I will also download a few others roms (and respective kernels) and try them all out. Only one thing, I was going to download MiniCM10 and i saw this in its post: "MiniCM10 is an unofficial port of CyanogenMod 10 for the SEMC msm7x27 devices." What does it mean 'for the SEMC msm7x27 devices'? Is it related to bootload unlock? Because i get Setool2 Certificate instead of SEMC. Does this make my problem a little easier?
EDIT: Ok, i've just tried ICZaraki+nAa-04-ics, minicm10+nAa-jb, gingerdx/gingerzaraki+nAa 11, and guess what, none worked.... We have to start thinking this is not related with the kernel or rom maybe? Any suggestions? When i tried the nAa-11 kernel, when i booted up the phone a white led popped up instead of a green one. I'm not worried if this takes a whole month to fix, i'm up for any suggestions and ideas of any kind, just throw them at me.
Click to expand...
Click to collapse
This happen with alfs too? Have you followed all istructions to unlock bootloader?
Ah please..provide logcat! Big devs like rohin,eet, etc maybe can help you with logcat
ElmirBuljubasic said:
This happen with alfs too? Have you followed all istructions to unlock bootloader?
Ah please..provide logcat! Big devs like rohin,eet, etc maybe can help you with logcat
Click to expand...
Click to collapse
Yep, happens with all the kernels i've used, nAa-11/14, nAa JB, ICS, etc....
Googled logcat, i understand its use, but how do you want me to use it?
Yes, bootload is unlocked, i have the "r". Or is there any chance that even with the "r" it's still locked? Anyway, i followed the guides with no problem.
emaz1ng said:
Yep, happens with all the kernels i've used, nAa-11/14, nAa JB, ICS, etc....
Googled logcat, i understand its use, but how do you want me to use it?
Yes, bootload is unlocked, i have the "r". Or is there any chance that even with the "r" it's still locked? Anyway, i followed the guides with no problem.
Click to expand...
Click to collapse
you can try to use my automated tool at my siggy. Just upload the logs at here and the devs will do their jobs
wcypierre said:
you can try to use my automated tool at my siggy. Just upload the logs at here and the devs will do their jobs
Click to expand...
Click to collapse
am i supposed to specify a device (device id?) or just log all and upload them here?

[Q] Installing cm 7 or unlock bootloader and install cm 10?

Sony ericsson xperia x8 11W43 e15i firmware version: 2.1 update 1 kernel version: 2.6.29 build number: 2.1.1.C.0.0.
I want to install cm 7 or better 10 on my phone. I know cm 10 requires that the bootloader is unlocked, which it is not.
It has turned out to be a very difficult task and I have not succeeded.
Another user on this forum has made a big effort to get cm on my phone. That is why I know how to root the phone and set usb debugging and allow other software sources.
I have got this software at hand
s1tool, gingerdx v0.31, X8_E15_2.1.1.C.0.0_generic.ftf, cwm.
Furthermore I have been using recoverx from google play.
Nothing worked. Gingerdx never starts, I have tried to let the phone boot for 20 minutes several times.
I also tried the paid wotanserver dot com option in order to get the phone's bootloader unlocked. That also failed, because when I ran the wontanserver software on a windows 7 hp computer, I could not login to wotanserver and execute the bootloader unlocking. Wotanserver could not provide further instructions, and I got a refund.
I am informed about the 11w36 issue, that is why I have not tried to unlock the bootloader using s1tool. If there if new information about how to unlock the bootloader I would very much like to get it?
If you know a working 10usd paid option to unlock the bootloader, please tell me?
I have also in parts read posts about testpoints to unlock the bootloader, but no post has come to a conclusion whether it can be done?
Failing can be related to me not installing correctly or there is some error about the phone.
thmmht said:
I have got this software at hand
s1tool, gingerdx v0.31, X8_E15_2.1.1.C.0.0_generic.ftf, cwm.
Furthermore I have been using recoverx from google play.
Nothing worked. Gingerdx never starts, I have tried to let the phone boot for 20 minutes several times
Click to expand...
Click to collapse
You need cwm. Try again and make sure you full wipe(factory reset, wipe Dalvik cache) before flashing.
I am informed about the 11w36 issue, that is why I have not tried to unlock the bootloader using s1tool. If there if new information about how to unlock the bootloader I would very much like to get it?
Click to expand...
Click to collapse
There isn't anything. Just try the roms that are working with stock kernel.
I have also in parts read posts about testpoints to unlock the bootloader, but no post has come to a conclusion whether it can be done?
Click to expand...
Click to collapse
No difference. Maybe what you saw wasn't for the x8, but for x10/x10 mini.
unlock bootloader is better option and instal cm 7 with nAa14 kernel for better performance.
Cyanogenmod 10 have worst performance than Cyanogenmod 7.2.
If you want play games on X8.
hubert123454 said:
unlock bootloader is better option and instal cm 7 with nAa14 kernel for better performance.
Cyanogenmod 10 have worst performance than Cyanogenmod 7.2.
If you want play games on X8.
Click to expand...
Click to collapse
Sony ericsson xperia x8 11W43
Click to expand...
Click to collapse
You are right but that not the case as he can't unlock his bootloader.
Thank you for answering.
This is what I have done about ten times.
Set and marked usb debugging and other software sources.
Rooted the phone using s1tool.
Installed cwm using recoverx from google play, or a cwm file.
Flashing gingerdx from sd card using cwm.
Reboot.
Everytime the phone gets stuck in boot mode. Then I have to flash X8_E15_2.1.1.C.0.0_generic.ftf_FILES in order to get a working phone.
You ask me to do a factory reset after I have flashed the phone into working order again?
The part about wipe Dalvik cache I do not get. Is that something I do on android 2.1?
When I boot into cwm, which can take several tries, there is a wipe option, do you ask me to select that option before flashing ginger dx?
I get if recoverx worked like it should do, flashing the phone would be a small task.
On this forum in some posts there has been some efforts to testpoints unlock the xperia x8's bootloader. To my knowledge, they did not come to a conclusion.
thmmht said:
The part about wipe Dalvik cache I do not get. Is that something I do on android 2.1?
Click to expand...
Click to collapse
No, you will do it from cwm. I believe it is under "Advanced".
When I boot into cwm, which can take several tries, there is a wipe option, do you ask me to select that option before flashing ginger dx?
Click to expand...
Click to collapse
Yes. If I remember correctly somewhere it says "Factory reset".
Set and marked usb debugging and other software sources.
Rooted the phone using s1tool.
Installed cwm using recoverx from google play, or a cwm file.
Flashing gingerdx from sd card using cwm.
Reboot.
Click to expand...
Click to collapse
To the above add before flashing gingerdx:
Full wipe.

Categories

Resources