i recently asked for help in regards to rooting firmware 14.3.A.681 Model C6903 a noobs guide really since i am still new to it but some of the reply's i got were a bit confusing but all had one thing in common which was downgrade to an ftf ending in .534. The issues making me confused are
1. when i downgrade to .534 ftf i downloaded the Commercial and Generic UK unbranded versions and to my surprise my SIM Card wasn't detected i really dont know why :/
2.the next issue was reply's from some members regarding the next step which was after downgrading install xddualrecovery others also said root the .534 firmware first then install xddualrecovery and i noticed with some versions of xddualrecovery there's a 3rd option called "Install on non root" now my question here is, that option will it root and install a recovery on my phone such as CWM or TWRP and if yes why do i need a recovery am just rooting and truly do not wish to backup any data on phone or SD Card or install custom roms in future
3.the next issue was SuperSU after doing some googling on it i realized its an apk for root but i thought rooting will give me superuser access so my do i need that and why does xddualrecovery have an option of install SuperSU on rooted phone
4. the next issue is flashable ftf's or zip and stripped ftf's or zip and how is it different from regular or Stock ftf's and also why do i need to flash a flashable zip or ftf in say TWRP recovery and after powering off flash it again with the flashtool as some members suggested ?
5. the next issue is if its really required to install a recovery such as CWM or TWRP to get root access how do i unroot and get back default Stock firmware
6. what is locked and unlock bootloader ? and how do i know if mine is locked or unlocked some members made statements regarding that
all these issues especially my SIM Card not being detected made downgrade to C6903_14.2.A.0.290_Generic MY_1276-7939_R1B before my sim card started functioning and my last question is how to root 14.2.A.0.290 since it seems kitkat rooting is quite complicated and i hope rooting 14.2.A.0.290 would not require a downgrade
All answers are in Z1 Section. Read carefully, it is simply. To me look like you don't agree with the method to get root, than stay stock if you don't like it. There is no other ways.
i wish to root
eclyptos said:
All answers are in Z1 Section. Read carefully, it is simply. To me look like you don't agree with the method to get root, than stay stock if you don't like it. There is no other ways.
Click to expand...
Click to collapse
i want to root but i think the steps in the forums are not detailed enough like when they say install xddualrecovery am thinking it should be something like this when u install xddualrecovery you will see 3 options now depending on say the status of your phone whether root or unrooted do this and not just "install xddualrecovery" you see 3 options and you just dont know what to choose i hope you understand
further explanation
cainwireshark said:
i want to root but i think the steps in the forums are not detailed enough like when they say install xddualrecovery am thinking it should be something like this when u install xddualrecovery you will see 3 options now depending on say the status of your phone whether root or unrooted do this and not just "install xddualrecovery" you see 3 options and you just dont know what to choose i hope you understand
Click to expand...
Click to collapse
another example a member explained how to flash a flashable zip through TWRP in detail """In TWRP -> Wipe -> advanced Wipe Tick/Check:
Dalvik-Cache
System
Cache
Data
Then 'Swipe to Right' to make it happen and go back to the TWRP home screen;
Flash 'C69XX_14.2.A.0.290.flashable.zip' in TWRP """"""" but failed to explain in detail how to flash a stripped ftf of that "Flash everything in 'C69XX_14.2.A.0.290_Stripped.ftf';" and besides when i open that stripped ftf there are so many files i dont know what to do with them or flash it
cainwireshark said:
i want to root but i think the steps in the forums are not detailed enough like when they say install xddualrecovery am thinking it should be something like this when u install xddualrecovery you will see 3 options now depending on say the status of your phone whether root or unrooted do this and not just "install xddualrecovery" you see 3 options and you just dont know what to choose i hope you understand
Click to expand...
Click to collapse
The instructions for installing dual recovery are in the OP of the dual recovery thread.
They are detailed enough there
gregbradley said:
The instructions for installing dual recovery are in the OP of the dual recovery thread.
They are detailed enough there
Click to expand...
Click to collapse
my problem is not installing dual recovery my problem is how to flash a stripped ftf what should i use flashtool ? or another tool ?
cainwireshark said:
i want to root but i think the steps in the forums are not detailed enough like when they say install xddualrecovery am thinking it should be something like this when u install xddualrecovery you will see 3 options now depending on say the status of your phone whether root or unrooted do this and not just "install xddualrecovery" you see 3 options and you just dont know what to choose i hope you understand
Click to expand...
Click to collapse
Downgrade to .534 with the FTF provided by NUT (Post ##3), then Root with Bin4ry method (Best One), Install SuperSU from Play Store, Install XZDualRecovery (you should know Now which option) and grant everything in SuperSU, recovery is needed to install Pre-Rooted Stock FTF (without it you can Dream about Rooted Android), then go to the page of you prefered Stock Android 4.3 or 4.4 and follow the instruction "How TO". HOW? Reboot in Recovery, Flash the .zip Rooted Android, Power off and don't reboot, Flash from Flashtool the Stripped FTF. Reboot and enjoy your Rooted Device.
Simply like that!!
eclyptos said:
Downgrade to .534 with the FTF provided by NUT (Post ##3), then Root with Bin4ry method (Best One), Install SuperSU from Play Store, Install XZDualRecovery (you should know Now which option) and grant everything in SuperSU, recovery is needed to install Pre-Rooted Stock FTF (without it you can Dream about Rooted Android), then go to the page of you prefered Stock Android 4.3 or 4.4 and follow the instruction "How TO". HOW? Reboot in Recovery, Flash the .zip Rooted Android, Power off and don't reboot, Flash from Flashtool the Stripped FTF. Reboot and enjoy your Rooted Device.
Simply like that!!
Click to expand...
Click to collapse
how to do this ?????? the stripped ftf is multiple files how to use them i have no idea since all ftf i i have flashed are one large single files Flash from Flashtool the Stripped FTF. Reboot and enjoy your Rooted Device.
cainwireshark said:
how to do this ?????? the stripped ftf is multiple files how to use them i have no idea since all ftf i i have flashed are one large single files Flash from Flashtool the Stripped FTF. Reboot and enjoy your Rooted Device.
Click to expand...
Click to collapse
You flash it just like any other FTF, do not open it.
All ftf files have multiple files in them, they are basically a zip archive. In fact the stripped FTF has LESS files in it than the big ones....
gregbradley said:
You flash it just like any other FTF, do not open it.
All ftf files have multiple files in them, they are basically a zip archive. In fact the stripped FTF has LESS files in it than the big ones....
Click to expand...
Click to collapse
after looking elsewhere i realized i have to brand it before it becomes a single ftf of around 20MB so i need to flash a 20MB stripped ftf ????? with flashtool ?
NO, you flash it just like it says in [NUT]s instructions.
Just like any other FTF file, there is no difference.
Just like this
http://prntscr.com/385zsi
That has exactly what you need to do...
cainwireshark said:
how to do this ?????? the stripped ftf is multiple files how to use them i have no idea since all ftf i i have flashed are one large single files Flash from Flashtool the Stripped FTF. Reboot and enjoy your Rooted Device.
Click to expand...
Click to collapse
I don't know why the extension of the stripped file is in .zip. Put that stripped file in Flashtool>firmware folder and if Flashtool recognize the file then you are ready to go, if not, change the Extension of that file from .zip to .ftf and try again. Same way like the downgrade, which I assume you did.
eclyptos said:
I don't know why the extension of the stripped file is in .zip. Put that stripped file in Flashtool>firmware folder and if Flashtool recognize the file then you are ready to go, if not change the Extension of that file from .zip to .ftf and try again. Same way like the downgrade, which I assume you did.
Click to expand...
Click to collapse
Yes, its a .zip to help with the download from [NUT]s server
I forgot that
Just change the .zip to .FTF and all is good.
@cainwireshark
BTW, after rename the extension you have to Reboot Flashtool (v0.9.15).
problem with step 3 and 6
gregbradley said:
NO, you flash it just like it says in [NUT]s instructions.
Just like any other FTF file, there is no difference.
Just like this
http://prntscr.com/385zsi
That has exactly what you need to do...
Click to expand...
Click to collapse
when i place it there it doesnt show in flashtool whether i copy the zip there or extract the contents there it just wont show :crying:
cainwireshark said:
when i place it there it doesnt show in flashtool whether i copy the zip there or extract the contents there it just wont show :crying:
Click to expand...
Click to collapse
change the extension of the file to .ftf, do not extract them
a .ftf file is just a .zip archive with a different extension. It needs to be .ftf for flashtool to recognise it as a (F)lash(T)ool (F)ile
still not showing
gregbradley said:
change the extension of the file to .ftf, do not extract them
a .ftf file is just a .zip archive with a different extension. It needs to be .ftf for flashtool to recognise it as a (F)lash(T)ool (F)ile
Click to expand...
Click to collapse
either am doing it wrong but not showing :/
cainwireshark said:
either am doing it wrong but not showing :/
Click to expand...
Click to collapse
Try Reboot your PC.
thanks
eclyptos said:
Try Reboot your PC.
Click to expand...
Click to collapse
working now thx
finally got root access on 4.3
thanks
gregbradley said:
change the extension of the file to .ftf, do not extract them
a .ftf file is just a .zip archive with a different extension. It needs to be .ftf for flashtool to recognise it as a (F)lash(T)ool (F)ile
Click to expand...
Click to collapse
thanks for effort in helping me finally got root on 4.3
Related
For first time i have made ftf file after updating my V
ftf is tested
dropbox link: http://dl.dropbox.com/u/17658154/LT25i_9.0.1.D.0.10_Nordic.ftf
ftp link: funiewski.dyndns.org
login: xda member pass: ftf nordic
championswimmers unsecure kernel is working with this firmware
I'll ask our users to check your file. Thanks for your work.
How did you get loader.sin?
dogsly said:
I'll ask our users to check your file. Thanks for your work.
How did you get loader.sin?
Click to expand...
Click to collapse
extract from .ftf file with winrar or similar
funiewski said:
extract from .ftf file with winrar or similar
Click to expand...
Click to collapse
Thank you, I know that.
The question was about how exactly did you get this file. After all, it is unique to SXV, and different from SXTX & SXT.
dogsly said:
Thank you, I know that.
The question was about how exactly did you get this file. After all, it is unique to SXV, and different from SXTX & SXT.
Click to expand...
Click to collapse
i extracted it from 9.0.D.0.484-INTL-GENERIC and integrated it in relock bootloader ftf for xperia 2012 devices, change extension to sin and you have it
So is it good to flash or??
funiewski said:
ftp: funiewski.dyndns.org
Click to expand...
Click to collapse
mirror: http://yadi.sk/d/lY9O3OjV1DZkG
*** My addition to Flashtool v0.9.9.0: To properly identify the device as a LT25 copy the folder LT25 from the attached archive into Flashtool at \Flashtool\devices.
Download: View attachment LT25.rar
dogsly
So its good then?
Rechargelegend said:
dogsly
So its good then?
Click to expand...
Click to collapse
now i have flashed it working wp
funiewski said:
now i have flashed it working wp
Click to expand...
Click to collapse
Flashed it to and its working great.
Thanks!
im sorry, but how do i flash this? I`ve just bought my first sony today..
I`ve installed championswimmer`s unsecure kernel.. so i couldnt update this with pc companion obviously..
though i cant get busybox or su installed due to some adb issues..
buljo said:
im sorry, but how do i flash this? I`ve just bought my first sony today..
I`ve installed championswimmer`s unsecure kernel.. so i couldnt update this with pc companion obviously..
though i cant get busybox or su installed due to some adb issues..
Click to expand...
Click to collapse
download flashtool, look in post seven in this thread and follow instructions, download this ftf, put ftf in flashtool firmware folder, use flashtool to flash it,try re install drivers, you can find those in flashtool driver folder, try to flash unsecure kernel and than su and busybox following instructions in kernel thread
But i already flashed unsecured kernel do I have to do it again after flashing this update?
I had some problems installing fastboot drivers, bit found a workaround here on xda. No matter what I do I can't get dba shell to work.really want to be fully rooted..
Thanks for your reply.
buljo said:
But i already flashed unsecured kernel do I have to do it again after flashing this update?
I had some problems installing fastboot drivers, bit found a workaround here on xda. No matter what I do I can't get dba shell to work.really want to be fully rooted..
Thanks for your reply.
Click to expand...
Click to collapse
yes usually you must flash kernel again, kernel in ftf is not unsecured, it must be replaced, unsecured=root
Holy sh.. So with each update we have to flash kernel and phone is fully reset yet again?!
Sent from my LT25i using xda premium
buljo said:
Holy sh.. So with each update we have to flash kernel and phone is fully reset yet again?!
Sent from my LT25i using xda premium
Click to expand...
Click to collapse
no, for now you can relock your bootloader and upgrade with pc companion, your data will be untouched, later there will be custom roms, when you have root you can always backup your data and apps with titanium and than restore, for now there is no recovery for v but it will be, in recovery you can make nandroid backup of whole system, what you need now is root and than titanium backup
but if i relock bootloader (how do i do that btw?) and upgrade using pc companion. then the kernel would be replaced and i would have to flash the unsecure kernel to obtain root? hence the phone will be fully reset again.
buljo said:
but if i relock bootloader (how do i do that btw?) and upgrade using pc companion. then the kernel would be replaced and i would have to flash the unsecure kernel to obtain root? hence the phone will be fully reset again.
Click to expand...
Click to collapse
you got it wrong, flashing kernel does not reset you phone, normal update through pc companion does not it either,for relock: relock ftf attached, you need:
1 change extension from zip to ftf
2 earlier in this thread #5 is attached loader.sin for V, you need to change extension from zip to sin
3 replace loader.sin inside relock.ftf with the one for V
4 flash with flashtool
Thank Bin4ry for relock ftf
funiewski said:
you got it wrong, flashing kernel does not reset you phone, normal update through pc companion does not it either,for relock: relock ftf attached, you need:
1 change extension from zip to ftf
2 earlier in this thread #5 is attached loader.sin for V, you need to change extension from zip to sin
3 replace loader.sin inside relock.ftf with the one for V
4 flash with flashtool
Thank Bin4ry for relock ftf
Click to expand...
Click to collapse
post #7 is also good?
LT25i_Relock_bootloader_dogsly_test.ftf
Create Flashtool version 0.9.9.0
Not tested (I have no SXV) I had already made the files for relock bootloader SXP, SXU, SX Ion, and they worked.
All credit goes to @zhuhang. I have no contribution to it.
Original thread is here: http://forum.xda-developers.com/showthread.php?p=45344021
This method will help you gain root access on the latest .67 4.2.2 update that Sony recently pushed out.
Disclaimer:
- This requires a PC.
- No CWM needed.
- This installs a Chinese root manager rather than superuser or superSU. But I will teach you how to replace it below.
Instruction:
1. Download the rooting application. (This app can root many other devices )
VRoot_1.6.0.3690
http://www.mediafire.com/download/v3...3690_Setup.exe
2. Install the app. This is a Chinese app so I will guide you. Below is a step by step screenshot attached guide.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called 授权管理 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for permission by 授权管理 1.0.4, choose 允许(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze 授权管理 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and 授权管理 1.0.4 will not be there anymore.
Click to expand...
Click to collapse
djpeesh said:
Can someone upload an ftf with just the kernel.sin and bootloader.sin for the C5503? I tried creating one using C5502 kernel and i got stuck in a boot loop. luckily my battery was just at about 10% and so I quickly flashed back the 4.2.2 Kernel of the 5503 and all is well.
Once we get the kernel only ftf, can test and create guide for rooting 5503 on 4.2.2
Click to expand...
Click to collapse
Tried with the C5503 kernel. Same boot loop. I think we'll have to find an alternate root method, as unlike the Z, the ZR doesnt have .234 firmware [that is also 4.2]
Experimenting with the Z firmware. Wish me luck
Why not flash only kernel from the previous firmware? Isn't working?
UPD. I see - not work
djpeesh said:
Tried with the C5503 kernel. Same boot loop. I think we'll have to find an alternate root method, as unlike the Z, the ZR doesnt have .234 firmware [that is also 4.2]
Experimenting with the Z firmware. Wish me luck
Click to expand...
Click to collapse
I have rooted mine already (ie. Android 4.2.2). You have to unlock your bootloader for this method to work.
akash4357 said:
I have rooted mine already (ie. Android 4.2.2). You have to unlock your bootloader for this method to work.
Click to expand...
Click to collapse
Can you say more about your 4.2.2 rooting method?
itandy said:
Can you say more about your 4.2.2 rooting method?
Click to expand...
Click to collapse
Firstly you need to unlock your bootloader. Google that, its easy. OR you can do it through flashtools (not tested).
Enable USB Debugging and unknown sources option on your phone before proceeding.
Download Flashtool, Open it. Flash the the kernel of an old firmware of Xperia ZR which was rootable.
Reboot your Xperia ZR after flashing. Connect to PC in USB Debugging mode.
Do not forget to close FLASHTOOL.
Extract the downloaded “DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip” file and run the “runme_win” file.
Follow onscreen instructions to root Xperia ZR and once it is rooted, device will reboot. Verify that you are rooted, run SuperSU app.
Now switch off your Xperia ZR. OPEN FLASHTOOL.
Now you need to flash the true kernel of Android 4.2.2 10.3.1.A.0.244 firmware of Xperia ZR.
After flashing, disconnect the phone from PC, reboot it and your Xperia ZR is now rooted
Official Thread
akash4357 said:
Firstly you need to unlock your bootloader. Google that, its easy. OR you can do it through flashtools (not tested).
Enable USB Debugging and unknown sources option on your phone before proceeding.
Download Flashtool, Open it. Flash the the kernel of an old firmware of Xperia ZR which was rootable.
Reboot your Xperia ZR after flashing. Connect to PC in USB Debugging mode.
Do not forget to close FLASHTOOL.
Extract the downloaded “DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip” file and run the “runme_win” file.
Follow onscreen instructions to root Xperia ZR and once it is rooted, device will reboot. Verify that you are rooted, run SuperSU app.
Now switch off your Xperia ZR. OPEN FLASHTOOL.
Now you need to flash the true kernel of Android 4.2.2 10.3.1.A.0.244 firmware of Xperia ZR.
After flashing, disconnect the phone from PC, reboot it and your Xperia ZR is now rooted
Click to expand...
Click to collapse
So basically you're doing:
Use FlashTool to flash the 4.2.2 FTF
Downgrade the kernel by using FlashTool back to 4.1.2
Run the DoomLord rooting kit
Flash back 4.2.2 kernel using FlashTool
To flash the kernel you need an unlocked bootloader. What I don't understand is how to flash the kernel only? I found the kernel.sin inside the FTF file. Can I just delete other .sin file and flash the remaining FTF file?
Sorry if my questions are noob.
itandy said:
So basically you're doing:
Use FlashTool to flash the 4.2.2 FTF
Downgrade the kernel by using FlashTool back to 4.1.2
Run the DoomLord rooting kit
Flash back 4.2.2 kernel using FlashTool
To flash the kernel you need an unlocked bootloader. What I don't understand is how to flash the kernel only? I found the kernel.sin inside the FTF file. Can I just delete other .sin file and flash the remaining FTF file?
Sorry if my questions are noob.
Click to expand...
Click to collapse
You need to keep the kernel.sin and bootloader.sin in the ftf and delete the rest. Also don't delete the META-INF file.
Official thread
akash4357 said:
You need to keep the kernel.sin and bootloader.sin in the ftf and delete the rest. Also don't delete the META-INF file.
Official thread
Click to expand...
Click to collapse
The problem is the bootloader? I thought doom's thread said that this was for locked and unlocked bootloader. Unlocking the bootloader will lead to a lot of people avoiding the root method.
Sent from my C5503 using Tapatalk 2
djpeesh said:
The problem is the bootloader? I thought doom's thread said that this was for locked and unlocked bootloader. Unlocking the bootloader will lead to a lot of people avoiding the root method.
Sent from my C5503 using Tapatalk 2
Click to expand...
Click to collapse
So is an unlocked bootloader NEEDED for this method to work for ZR? I thought DoomLord said it works for both.
akash4357 said:
You need to keep the kernel.sin and bootloader.sin in the ftf and delete the rest. Also don't delete the META-INF file.
Official thread
Click to expand...
Click to collapse
Have you managed to root through this method?
djpeesh said:
Have you managed to root through this method?
Click to expand...
Click to collapse
I did manage to root it, but then the phone suddenly restarts. Now I am stuck with bootloops. Strange as I managed to install Superuser from the Play Store.
Edit. I recommend not trying to root using this method. Wait till theres a definitive rooting method.
djpeesh said:
Have you managed to root through this method?
Click to expand...
Click to collapse
I see you got bootloop from the other thread. Did you manage to fix it?
Bump.
itandy said:
I see you got bootloop from the other thread. Did you manage to fix it?
Click to expand...
Click to collapse
Yes. I fixed the bootloop issue. Need any help with the bootloop?
If you've got a bootloop, pull the battery asap as once it dies, you won't be able to flash ftf and the device will be bricked.
To fix bootloop [and still not get root access]
1. Open the 4.2.2 ftf file in flashtool.
2. Exclude everything [tick in the exclude box] except the kernel, and untick everything in the wipe box [data, applog]
3. Flash the kernel by pressing the volume down button while plugging in USB cable [DONT PRESS POWER BUTTON AFTER BATTERY PULL AS OTHERWISE YOU'LL GO BACK INTO BOOTLOOP]
4. After it flashes [should take a couple of seconds], reboot and you should be back to normal
I REPEAT PULL THE BATTERY IF IN A BOOTLOOP OR YOU'LL LAND UP WITH ANOTHER PAPERWEIGHT
djpeesh said:
Yes. I fixed the bootloop issue. Need any help with the bootloop?
If you've got a bootloop, pull the battery asap as once it dies, you won't be able to flash ftf and the device will be bricked.
To fix bootloop [and still not get root access]
1. Open the 4.2.2 ftf file in flashtool.
2. Exclude everything [tick in the exclude box] except the kernel, and untick everything in the wipe box [data, applog]
3. Flash the kernel by pressing the volume down button while plugging in USB cable [DONT PRESS POWER BUTTON AFTER BATTERY PULL AS OTHERWISE YOU'LL GO BACK INTO BOOTLOOP]
4. After it flashes [should take a couple of seconds], reboot and you should be back to normal
I REPEAT PULL THE BATTERY IF IN A BOOTLOOP OR YOU'LL LAND UP WITH ANOTHER PAPERWEIGHT
Click to expand...
Click to collapse
I just learned a lesson! Thanks!
So again you're not successful in rooting 4.2.2 using the kernel switching method?
i think the kernel switching fix will not work on ZR.. we don't have a rootable 4.2 kernel
i think the 423 kernel is 4.2
djpeesh said:
Yes. I fixed the bootloop issue. Need any help with the bootloop?
If you've got a bootloop, pull the battery asap as once it dies, you won't be able to flash ftf and the device will be bricked.
To fix bootloop [and still not get root access]
1. Open the 4.2.2 ftf file in flashtool.
2. Exclude everything [tick in the exclude box] except the kernel, and untick everything in the wipe box [data, applog]
3. Flash the kernel by pressing the volume down button while plugging in USB cable [DONT PRESS POWER BUTTON AFTER BATTERY PULL AS OTHERWISE YOU'LL GO BACK INTO BOOTLOOP]
4. After it flashes [should take a couple of seconds], reboot and you should be back to normal
I REPEAT PULL THE BATTERY IF IN A BOOTLOOP OR YOU'LL LAND UP WITH ANOTHER PAPERWEIGHT
Click to expand...
Click to collapse
I am trying to get 4.2.2, but after flashing the system rom on step 4, I got into a boot loop. I can't seem to use flashtool to recover, Please help! I can't even get to recovery
EDIT: Now I am going somewhere I think, but I don't know if this is serious, I get this from flashmode now
ERROR - Error in processHeader : 1 : Incorrect function.
ERROR - Error flashing. Aborted
EDIT: I think I bricked my device =(
grim_ripper said:
I am trying to get 4.2.2, but after flashing the system rom on step 4, I got into a boot loop. I can't seem to use flashtool to recover, Please help! I can't even get to recovery
EDIT: Now I am going somewhere I think, but I don't know if this is serious, I get this from flashmode now
ERROR - Error in processHeader : 1 : Incorrect function.
ERROR - Error flashing. Aborted
EDIT: I think I bricked my device =(
Click to expand...
Click to collapse
It happened to me also, but it's possible to recover from it.
Install PC Companion on your PC.
Go to Support Zone.
First option -> Update phone / tablet software.
You will see a underlined link that says "repair phone / tablet"
Just follow the instructions.
You will need your phone to have at least 50% battery level. Take out the battery, insert again, and connect your phone to your PC via USB while pressing the Volume + button. You will hear a sound coming from your PC meaning it's been connected.
Sony PC Companion then will flash your phone with the latest firmware. It takes a while and you need to have internet connection, but it works.
As you flashed the Russian system rom, the firmware installed in your phone by Sony PC companion will be the Russian Android 4.2.2. No problem with this as it includes all the languages.
Do this as soon as possible as you need your battery charged and you can't charge the battery in your phone while in the bootloop state.
-------------------------------------------------------------------------
-------------------------------------------------------------------------
I'm not sure what we did wrong to be stuck in a bootloop, but after my ZR being reflashed by Sony PC Companion I just flashed the Nordic 4.2.2 ROM and my phone remains unrooted until there is a easier method to get root
grim_ripper said:
I am trying to get 4.2.2, but after flashing the system rom on step 4, I got into a boot loop. I can't seem to use flashtool to recover, Please help! I can't even get to recovery
EDIT: Now I am going somewhere I think, but I don't know if this is serious, I get this from flashmode now
ERROR - Error in processHeader : 1 : Incorrect function.
ERROR - Error flashing. Aborted
EDIT: I think I bricked my device =(
Click to expand...
Click to collapse
In fact you should read the other thread for a workable root method for 4.2.2. This thread is very old and AFAIK this method doesn't work.
Hello,
I have my ZR (5503) rooted with 4.4 the bootloader is locked. Since I am not a dev or something i want to test it first. I tell what i did if a dev want to know how i did it.
I had a ZR with 4.1/rooted/recovery on it.
I used a 10.5.A.0.530 NCB file for to start.
I followed this guide (thread) http://forum.xda-developers.com/showthread.php?t=2307311
Almost at the end you have to flash the created zip in recovery. After that i flashed the SuperSU_fix.zip and update-SuperSU-v1.86.zip (i dont know if it was needed).
Then i switch the mobile off and flash the FTF file (10.5.A.0.530NCB) with system excluded (flashtool).
After this i boot in 4.4 and then checked if i had root and it was. The recovery was lost but i managed to get it back with the ZRDUALRECOVERY
Now i go to do the proces again and make a tutorial and maybe put the files somewhere.
I am happy already,
Try to use the Remount reboot fix by nut
and use foldermount and check as this is the most important thing to me
John98Zakaria said:
Try to use the Remount reboot fix by nut
and use foldermount and check as this is the most important thing to me
Click to expand...
Click to collapse
root is working good..... I am repeating the steps now and then i go to try it.
hans3103 said:
root is working good..... I am repeating the steps now and then i go to try it.
Click to expand...
Click to collapse
foldermount works....
[Stock ROM][LB/??][4.4] Pre-Rooted 10.5.A.0.230
Hello,
I found a way for to get root with kitkat 4.4 and a locked bootloader.
Try at won risk! I am not responsible for things that go wrong.
what you need for to start :
working recovery and root 4.1, 4.2 or 4.3 (i had a 4.1 android version)
Flashtool
steps:
download :
zrkitkat5503.zip https://mega.co.nz/#!DYZwTRhL!6kYealPTKNZT_YX7Zgp3gvs6BP7dcBcVa7FyZBw72qg
stripped rom 4.4 : https://mega.co.nz/#!2YZn3LyB!JKCaBQdMpkqxiO6UbbsXeF3aNgvaoe9Z6iNEERCF7aY
Update Super SU: https://mega.co.nz/#!LEIwGDCS!KVxVB-wYlClhblPY-g5MQ71D_7U2acd7hwwqAxJj20c
Recovery: https://mega.co.nz/#!GIpWEJjJ!0gEIZawEwKuvmEZ4LQm-4ZCmduoy7kxwxDLSResqvUQ
copy kitkatzr5503.zip to your external memorycard.
unzip the su-binary fix and copy it to memorycard.
boot in recovery and wipe cache partition,wipe Dalvik cache and wipe Data/Factory reset.
flash the kitkatzr5503.zip and after that flash the su-binary fix.
DONT BOOT!
power off and get your phone in flashmode , flash the stipped 4.4 rom with flashtool.
reboot and you will have root, install zrdualrecovery again and then everything works.
for sure someone else can make a more nice way for to install it but this works. And if someone make a better tutorial let me know. Also i dont have experience with MEGA for file sharing. If there is a better way let me know.
succes
hans3103 said:
Hello,
I have my ZR (5503) rooted with 4.4 the bootloader is locked. Since I am not a dev or something i want to test it first. I tell what i did if a dev want to know how i did it.
I had a ZR with 4.1/rooted/recovery on it.
I used a 10.5.A.0.530 NCB file for to start.
I followed this guide (thread) http://forum.xda-developers.com/showthread.php?t=2307311
Almost at the end you have to flash the created zip in recovery. After that i flashed the SuperSU_fix.zip and update-SuperSU-v1.86.zip (i dont know if it was needed).
Then i switch the mobile off and flash the FTF file (10.5.A.0.530NCB) with system excluded (flashtool).
After this i boot in 4.4 and then checked if i had root and it was. The recovery was lost but i managed to get it back with the ZRDUALRECOVERY
Now i go to do the proces again and make a tutorial and maybe put the files somewhere.
I am happy already,
Click to expand...
Click to collapse
My kernal is not the same as the one in the screenshot can i follow the same way?
I dont know for sure, i used a standard rom for to make this....
Sent from my C5503 using XDA Premium 4 mobile app
hans3103 said:
Hello,
I found a way for to get root with kitkat 4.4 and a locked bootloader.
Try at won risk! I am not responsible for things that go wrong.
what you need for to start :
working recovery and root 4.1, 4.2 or 4.3 (i had a 4.1 android version)
Flashtool
steps:
download :
zrkitkat5503.zip https://mega.co.nz/#!DYZwTRhL!6kYealPTKNZT_YX7Zgp3gvs6BP7dcBcVa7FyZBw72qg
stripped rom 4.4 : https://mega.co.nz/#!2YZn3LyB!JKCaBQdMpkqxiO6UbbsXeF3aNgvaoe9Z6iNEERCF7aY
Update Super SU: https://mega.co.nz/#!LEIwGDCS!KVxVB-wYlClhblPY-g5MQ71D_7U2acd7hwwqAxJj20c
Recovery: https://mega.co.nz/#!GIpWEJjJ!0gEIZawEwKuvmEZ4LQm-4ZCmduoy7kxwxDLSResqvUQ
copy kitkatzr5503.zip to your external memorycard.
unzip the su-binary fix and copy it to memorycard.
flash the kitkatzr5503.zip and after that flash the su-binary fix.
DONT BOOT!
power off and get your phone in flashmode , flash the stipped 4.4 rom with flashtool.
reboot and you will have root, install zrdualrecovery again and then everything works.
for sure someone else can make a more nice way for to install it but this works. And if someone make a better tutorial let me know. Also i dont have experience with MEGA for file sharing. If there is a better way let me know.
succes
Click to expand...
Click to collapse
Can I just flash the stock 4.4 FTF and unchecking the system instead of using the stripped rom you have provided?
Yes you can as the kernel in the picture expresses the version of the 4.4 version of android
I already done it. http://forum.xda-developers.com/showthread.php?t=2765062
Hi
I Rooted My Xperia Z1 C6903 4.4.2 build number 0.757 with easy root tool and towelroot and installed superSU. My Bootloader is locked and I don't have any recovery installed on my device. RootChecker stated that my device is rooted and i have an installed busybox but when i want to use MOD EDIT Mention of WAREZ is strictly forbidden It says that busybox not found and MOD EDIT mentions of WAREZ is strictly forbidden doesn't work. I don't have write access to system partition as well. I tried nextApp for fixing sd card access but it doesn't work because of system partition permission. How can i fix this? can you help me?
i don't want to loose my data, and i love my camera as well
Another Question is if i update my phone to 4.4.4 bulid 0.108 , can i root and have system partition write permission, as i can now update my device through Sony Update Center on my phone ? Can It harms my phone to update while it is rooted?
thanks for your helps
MOD EDIT
Further mention of WAREZ can and will lead to an infraction. Further instances will lead to a ban.
Any problems please pm me. @gregbradley
You forget to disable RIC protection service. Install recovery will disable it or just flash disable_ric file. Wait you don't have recovery........
Just flash full FTF of .108 via FlashTool, it's the easy way to update your ROM with minimal bug..... And yes, .108 is rootable....
MOD EDIT Removed quote about WAREZ @gregbradley
Kindly install busybox app from play store and open it once installed. U will find a option like "Install Busybox" just do it. It will install busybox on different path rather than it was been installed during rooting. (I can't remember exact path for both the conditions right now). I hope this will help you to resolve the issue of busybox not found.
BlackSoulxxx said:
You forget to disable RIC protection service. Install recovery will disable it or just flash disable_ric file. Wait you don't have recovery........
Just flash full FTF of .108 via FlashTool, it's the easy way to update your ROM with minimal bug..... And yes, .108 is rootable....
Click to expand...
Click to collapse
what happens if I install recovery? what I'll loos?
and if I update my ROM to .108 with FlashTool I'll loose my data? and what about my camera?
can i flash disable_ric with flash tool without recovery?
MOSJAVA said:
what happens if I install recovery? what I'll loos?
and if I update my ROM to .108 with FlashTool I'll loose my data? and what about my camera?
can i flash disable_ric with flash tool without recovery?
Click to expand...
Click to collapse
Install recovery is the good thing. You can restore your device from any backup if something is wrong. You can install different mod like True stereo, sound mod, theme, etc and the good thing is you dont lost anything (except for UB..)
Yes, flash via FlashTool will wipe all of your data so make sure to backup it before doing any thing. And the camera is fine and they are always improve in the latest update (Faster camera start time, increase image quality...)
No, you cant flash disable_ric via FlashTool..C'mon FT is for FTF file, kernel and bootloader file only.....
BlackSoulxxx said:
Install recovery is the good thing. You can restore your device from any backup if something is wrong. You can install different mod like True stereo, sound mod, theme, etc and the good thing is you dont lost anything (except for UB..)
Yes, flash via FlashTool will wipe all of your data so make sure to backup it before doing any thing. And the camera is fine and they are always improve in the latest update (Faster camera start time, increase image quality...)
No, you cant flash disable_ric via FlashTool..C'mon FT is for FTF file, kernel and bootloader file only.....
Click to expand...
Click to collapse
Excuse Me, What UB is?
Unlocked Bootloader...
1.Is it possible to flash CWM recovery using flashtool
2.can I flash ftf file with bootloader unlocked
3.Will the flash tool detect my device if it is on a bootloop?
4.should I wipe dalvik cache and cache partition while flashing
custom rom. if possible plz attach a relevant link which would guide me
to flash custom ROM.
5. while flashing custom ROM from stock ROM is there any procedures
like flashing kernels etc.,
6. my ftf file is not detected:
I placed the ftf file in firmwares folder and I gave the lightening button to flash, then clicked flashmode. Then a list appeared showing file but ftf file which I placed is not present there but it is physically present in that same folder....
rukman rocking said:
1.Is it possible to flash CWM recovery using flashtool
2.can I flash ftf file with bootloader unlocked
3.Will the flash tool detect my device if it is on a bootloop?
4.should I wipe dalvik cache and cache partition while flashing
custom rom. if possible plz attach a relevant link which would guide me
to flash custom ROM.
5. while flashing custom ROM from stock ROM is there any procedures
like flashing kernels etc.,
6. my ftf file is not detected:
I placed the ftf file in firmwares folder and I gave the lightening button to flash, then clicked flashmode. Then a list appeared showing file but ftf file which I placed is not present there but it is physically present in that same folder....
Click to expand...
Click to collapse
1.No, get it from http://forum.xda-developers.com/showthread.php?t=2649923
2.Yes
3.Yes of course
4.You should wipe everything
5.Yes, if UB otherwise No. This is for you http://forum.xda-developers.com/xperia-sp/general/root-ultimate-noobs-guide-to-rooting-t2845520
6.It seems you did not download ftf properly
thanks
Phoenix854 said:
1.No, get it from http://forum.xda-developers.com/showthread.php?t=2649923
2.Yes
3.Yes of course
4.You should wipe everything
5.Yes, if UB otherwise No. This is for you http://forum.xda-developers.com/xperia-sp/general/root-ultimate-noobs-guide-to-rooting-t2845520
6.It seems you did not download ftf properly
Click to expand...
Click to collapse
thanks for your quick response.....
rukman rocking said:
thanks for your quick response.....
Click to expand...
Click to collapse
Thanks for really hitting the thanks button. Some just say thanks but actually forget to hit thanks button
rukman rocking said:
6. my ftf file is not detected:
I placed the ftf file in firmwares folder and I gave the lightening button to flash, then clicked flashmode. Then a list appeared showing file but ftf file which I placed is not present there but it is physically present in that same folder....
Click to expand...
Click to collapse
Try to put the ftf files in this location
C:\Documents and Settings\Owner\.flashTool\firmwares
no option
matsas said:
Try to put the ftf files in this location
C:\Documents and Settings\Owner\.flashTool\firmwares
Click to expand...
Click to collapse
there is no documents and settings in local disk(c)
i'm using windows 8.1. ill explain this problem with screenshots if you need.