Database Develop

[Q] Brick Kindle fire HD 7", red screen after Fireflash.

hello everyboddy !
I have a rooted kindle fire HD 7" with the last update and i have attempted to install:
2nd bootloader
Fireflash
TWRP
CM10
But... when i have try to install twrp with Fireflash a red screen is a appeared after the reboot.
I'm a noob and i'm a little panicked !!! Can you help me to unbrick my kindle, i'm ready to make evrything but i have only in my hand my kindle and the original cable.
Please XDA's community !!!

buy a fastboot cable
this helped me with a red screen http://forum.xda-developers.com/showthread.php?t=1951254

The reason this happened was because you was on 7.3x of the AmazonOS, you needed to flash the 7.23 bootloader first before installing the second bootloader. Only a factory cable and the restore tool will save you now.

I did the same thing and the fast boot cable saved me. Good investment.
Sent from my Kindle Fire HD 7 using xda app-developers app

Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd

Glad I'm not the only one. Have the red screen too.. ordered a cable from skorpn.. can't wait to get it and unbrick this thing. Feeling lost without my device.

i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized

Pls am in d same dilemma
goodknight001 said:
i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized
Click to expand...
Click to collapse
Am in the same dilemma as well pls kindly post a solution in case u found a way to resolve. I also bought a fastboot/factory cable as well but cant figure out how to make thingz work

bu,p pleas!

davelinc said:
Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd
Click to expand...
Click to collapse
Actually, I've used the FireFlash method twice now on my Kindle Fire HD, and it's worked flawlessly both times, and takes less than five minutes to complete. But hey, whatever works.

i was also stuck in a red screen loop!
you really need a factory cable
what i did was turn off the kindle fire hd then plug in the cable, i turned on the device, and boom just use the toolkit which you can find on the development thread
i hope this helps!!! i was so frustrated as to why it wouldnt work
also you must have the kindle fire adb drivers.
ONLY FOR THOSE WITH A BROKEN POWER BUTTON: and if you dont happen to have a functioning power button like me, wait until the tablet dies, after just plug in the tablet to your pc with the factory cable that way when it finally recharges it boots up in fastboot, otherwise your tablet will be in red screen forever

Bricked Kindle Fire HD

I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean

You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?

soupmagnet said:
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
Click to expand...
Click to collapse
i might be in the same boat...my kindle fire logo turns blue and gives me a msg at the bottom to press power button for boot menu
when i do i get normal boot,recover,and reset boot mode...when i click on one it just says booting and power button stays organish red for ever

Maybe you don't have your drivers properly installed
sent from my rooted kindle fire hd 7

Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
If you have twrp installed and the blue kindle boot screen just hit volume down and use the side load feature. But if your fastboot is giving u a problem where u can't hit update driver I would assume it would be because windows is already searching for one still? If so tell windows to skip obtaining from windows update and it finish sooner so u can try to update it manually.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
Hi Baconrind. Screwing one’s device is a good opportunity to learn new things. At least this is what happened to me and I’m glad I did. A couple of months ago I bought a new KFHD7. I spend "wonderful :laugh:" weeks as the happy owner of a KFHD7 until I started to discover the shortcomings of same, so I started reading xda-developers’ stuff to try to customise the device. First I rooted it to be able to install Google Play Store. The idea was to stay as close to stock as possible. Unfortunately I lost root with the first Amazon OTA update, then I decided to install a second bootloader, TWRP, etc. To do that I followed Hashcode’s method Kindle Fire 2nd-bootloader + TWRP for the Kindle Fire HD 7 but at some point I bricked :crying: my device. I was stuck at the Kindle Fire logo. I spent hours browsing through xda-developers and discovered that the first thing to do was to get a fastboot cable. I did not have the patience to wait for it to come from China or wherever they make them, so I found a couple of posts on the xda forum here and here. I made my own even my soldering capabilities are quite limited. I shut down the KFHD7 and plugged the “fastboot” cable to the PC and then to the Kindle, a couple of seconds later I could see the fastboot logo. Once I saw the fastboot logo I unplugged it and used the regular data transfer cable instead. Before I started the unbricking process proper I downloaded and installed this tool: KFHD_SRT_v1.3.5.-7.3. I followed the onscreen indications and could reset my KFHD7 back to its original state. Good luck.

Amazon Kindle Fire HD Stuck In Fastboot Mode HELP !!!

Hi,
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks

It doesn't show up at all on the device manager with a triangle next to it listed as Tate,jem, otter,or otter 2 does it?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

when i plug my kindle in the pc it does show tate-pvt-08 in device manager and the kindle is stuck in fastboot mode.. any advice?

Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app

stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
tried the driver but now in device manager the kindle has that yellow triangle and fastboot is stuck on waiting for device

Yellow triangle probably means the driver is still not installed...
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Stuck at Fastboot Mode
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.

guillemedina11 said:
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
Click to expand...
Click to collapse
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app

LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Click to expand...
Click to collapse
Thank you for taking your time to help me out, appreciate it.
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again. Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed. I'm using Kindle Fire First Aide but doesn't seems to work either.
Any toughts? Thank you.

guillemedina11 said:
Thank you for taking your time to help me out, appreciate it.
Click to expand...
Click to collapse
You're welcome
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again.
Click to expand...
Click to collapse
do you see the yellow Kindle Fire boot animation at all?
Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed.
Click to expand...
Click to collapse
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
I'm using Kindle Fire First Aide but doesn't seems to work either.
Click to expand...
Click to collapse
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse

LinearEquation said:
guillemedina11 said:
You're welcome
do you see the yellow Kindle Fire boot animation at all?
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
Mr LinearEquation, thank you so much for your advice.
Following a different thread i managed to boot into TWRP by flashing images of "Freedom Boot" and TWRP itself via fastboot commands. Now in theory i can flash a .zip of any ROM but the thing is that i cannot load zips to the Tablet. even though it's recognized now as KINDLE instead of Tate-PVT-08 in the Device Manager, i'm not able to see the kindle as a Pop-up window where you can drag-and-drop files to the Tablet.
The question is: How do i push a ROM via adb as you mentioned in your previous message? Do you know which file do i need and the proper command to push it?
Kindly Regards.
Click to expand...
Click to collapse

LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.

Underurbed said:
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Click to expand...
Click to collapse
Have you looked at this page? http://forum.xda-developers.com/showthread.php?t=2271909 Maybe the unbricked section (part 6 of first page) can help in particular the SRT tool http://forum.xda-developers.com/showthread.php?t=1951254 . I have also noticed if you scroll down to troubleshooting section on the first page of first link it lists your problem and the steps to resolve it
Sent from my Amazon Tate using Tapatalk

Thank you for the reply. Well, my first problem is the kindle doesn't stay on fastboot. It shuts down after a second.

recovery
Hi I locked mine up also and used a program called
Demo Mode Restore. Basically you shut off your kindle and unplug the charge/data cable run the program and click enter once then says plug you kindle in and when it boots the program catches it before it starts up and all you have to do is follow the directions and when it restarts its like when you first took it out of the box
You`ll have to do a search for Demo Mode Restore
Hope this help. God Bless )
joshuafalls63 said:
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
Click to expand...
Click to collapse

[Q] Help with deleted system.img & OS on Kindle Fire HD 7

I had some malware on on my kindle fire hd 7, a keylogger which someone installed to be exact. I went into the app settings trying to delete this file & i seem to have deleted the entire operating system from my kindle & now the whole system boot image is gone. I have no way to access adb usb debugging because the kindle no longer displays the notification bar at the top of the screen & because of this i'm unable to do the factory restore. I even bought a factory fastboot cable & it booted right into fast boot mode, but when i try to flash the system.img, it just tells me waiting on device. It also just show up as Tate-PVT-08 when in fastboot mode even though i have all the necessary drivers installed such as (kindle fire adb drivers,minimal adb and fastboot & android SDK ) Is there anyway you can assist me in getting my kindle back to working order ? Thank you. I attached some images so that you can see what i'm talking about. Even if i use the fast boot cable to boot into fast boot mode & then try to use the KFHD Restore Tool it just says waiting on device. Help !!

The drivers aren't installed if it has that mark next to it... Download the drivers in my signature, extract them, and tell that device with the exclamation to update drivers and search the location you extracted mine to.
Sent from my Amazon Kindle Fire HD using Tapatalk

ok, i will try them now.

Thank you very much stunts513
stunts513 said:
The drivers aren't installed if it has that mark next to it... Download the drivers in my signature, extract them, and tell that device with the exclamation to update drivers and search the location you extracted mine to.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
stunts513 thanks man you saved me from having to spend $200 to get a new Kindle, I really thought it was bricked forever. I can't thank you enough, once again thank you, you really helped me out.

[Q] twrp bootloop with a factoryboot cable on hand

Hello.
I rooted my kfhd 7 10.4.6 successfully and naturally proceeded to twrp where it got stuck on a bootloop. Now that I have made a factoryboot I was wondering what rout I should follow to flash the rom?
Browsing the topics I see these options:
* continue the process installing the twrp...
* download a toolkit that allows backup
* install ADB
* get fff
Now I'm wondering if someone has just made a restore utility, is there a utility to just restore to the state of having a rom installed?
Also, since I don't care for restoring backups, is there an easier way to flash?
I really appreciate your advice.
Deano

Firefirefire is not for this device 1st off, you don't have a kfhd 2nd off. Kfhd is v7.x.x. You have a kf2. Kf2's are 10.x.x.
Sent from my Kindle Fire HD 7 using XDA Premium 4 mobile app

if your logo turns blue at this point, turn the device off and when you turn it back on hold volume up while the logo is orange and keep holding it even after it turns blue, it should then say twrp and go into twrp, from there you could push a rom and flash it. If the logo does not turn blue then i would put it in fastboot and use kindle fire first aid to restore it, and try again.

which rout should I go? restore or twrp?
wire55 said:
Firefirefire is not for this device 1st off, you don't have a kfhd 2nd off. Kfhd is v7.x.x. You have a kf2. Kf2's are 10.x.x.
Click to expand...
Click to collapse
stunts513 said:
if your logo turns blue at this point, turn the device off and when you turn it back on hold volume up while the logo is orange and keep holding it even after it turns blue, it should then say twrp and go into twrp, from there you could push a rom and flash it. If the logo does not turn blue then i would put it in fastboot and use kindle fire first aid to restore it, and try again.
Click to expand...
Click to collapse
It's been a while since I bricked. Perhaps it was 10.4.6 I can no longer access the settings the verify. But now that I have a factoryboot cable. I would just flash cyanogenmod. Now when I connect factoryboot it reads (in a fancy 3d text) "Fastboot" with a small "kindle fire" on the right side of it.
I originally followed a youtube video that had links for freedom boots, twrp, etc... to this forum, but then again I must have downloaded incorrect versions.. I'm not concerned with the date. So I'm wondering if it's easier to restore or continue with twrp.
Here are some links I was looking at:
(do I need to go the adb rout)
http://forum.xda-developers.com/showthread.php?t=2459498
Do I need to have adb tools use command: fastboot -i 0x1949 getvar product
http://forum.xda-developers.com/showthread.php?p=33156486
http://forum.xda-developers.com/showthread.php?t=2685090
http://forum.xda-developers.com/showthread.php?t=2271909
http://forum.xda-developers.com/showthread.php?t=2685090
There are too many guides, here ... which is really great. But the process of download, verification, transfer (to a pc).
If I cant brick this device any harder than it is, I will follow each guide...
stunts513, the fire logo does not turn blue. In fact I was taking a video when it was loading ... (it's a funny video about
a guy who bricked his device)

I had the same issue... I forgot to remove a script before flashing twrp. Maybe it is the same for you. Did you followed carefully the tuto ?
In my situation, I managed to go into fastboot (with fasboot cable), flashed stock ROM, and did the flashing process from the beginning..
Hope it may help
"Envoyé depuis mon Amazon Kindle Fire HD avec Tapatalk"

If you only have fastboot access right now i suggest restoring with srt or kindle fire first aid. Afterwards you can start the twrp process over again, we can't simply flash cm from fastboot, if everything else isnt in place like the stack file or the bootimg and a old version of the bootloader then it wouldn't work. Fastboot should be in utilities like kffa and srt

stunts513 said:
If you only have fastboot access right now i suggest restoring with srt or kindle fire first aid. Afterwards you can start the twrp process over again, we can't simply flash cm from fastboot, if everything else isnt in place like the stack file or the bootimg and a old version of the bootloader then it wouldn't work. Fastboot should be in utilities like kffa and srt
Click to expand...
Click to collapse
There are so many options it seems, but I think I know what to do now (please let me know if it's not a incorrect course):
First, download and Kindle fire first aid from here, to restore back to and then follow the instruction here in order to start twrp and flashing.
wire55 said:
Firefirefire is not for this device 1st off, you don't have a kfhd 2nd off. Kfhd is v7.x.x. You have a kf2. Kf2's are 10.x.x.
Click to expand...
Click to collapse
I think the versions are according to kf2 (10.4.6) this time.
Thanks you so much everyone.

unbrick attempt 3
I have download and installed many sdks and drivers and checked md5.. while at it. kffirstaid does not really seem to connect with the device. And some messing around with the drivers did occur, uninstalling/reinstalling through downloads and through kffirstaid. It now announces as tate-pv-08 though a triangle is showing next to Android ADB Interface in device manager.. I think something is missing.. Is java sdk necessary? because it doesn't install ..
yeah
If I didn't mess around with my Kindle I would be reading through Dante's levels of hell which is more pleasant than all this troubleshooting ..

testing
test

You should be able to update the drivers of the Tate device using the drivers in my signature and have then programs work with fastboot. Not sure why an adb device and a Tate device show at same time, the Tate device should be the one needing fastboot drivers for it to work.

I got
stunts513 said:
If you only have fastboot access right now i suggest restoring with srt or kindle fire first aid. Afterwards you can start the twrp process over again, we can't simply flash cm from fastboot, if everything else isnt in place like the stack file or the bootimg and a old version of the bootloader then it wouldn't work. Fastboot should be in utilities like kffa and srt
Click to expand...
Click to collapse
Hi. Someone yanked out the factory-boot cable and I quickly ordered the scorpion king cable. I downloaded kffirst aide again and there's been a massive update. Running a restore showed all signs of success. But then after restoring it to normal boot, I get kindle fire logo showing and then the boot loop continues.

If kffa fails then try SRT.

Kffirst aide is in order
stunts513 said:
You should be able to update the drivers of the Tate device using the drivers in my signature and have then programs work with fastboot. Not sure why an adb device and a Tate device show at same time, the Tate device should be the one needing fastboot drivers for it to work.
Click to expand...
Click to collapse
I have upgraded kffirst aide and in the middle of restore I do the following statements:
cannot load 'boot-prod.img No error
cannot load recovery-prod.img No error
cannot load system.imp: No error
However at the end there is the success message:
Success!!! The kindle Fire 2 7 has been restored to software version 10.2.3
and yet the bootloop continues to plague the brick..

That means the files it tried to flash didn't exist on your computer. Try srt, it includes those images.

I have a kf2
stunts513 said:
That means the files it tried to flash didn't exist on your computer. Try srt, it includes those images.
Click to expand...
Click to collapse
I'm not sure if this is compatible with my device. Perhaps replacing those files/folders would solve the problem?

Oh wait yea kf2 didn't have a SRT.... My bad. Yea in that case you will need the kf2 I ages, kffa is supposed to download them for you but it's possible the links went down for the files.