Database Develop

Help with flashing philz kernel and custom rom

Hi, I need some help - I want to flash my Note to Liquid Smooth 2.2 rom, so please tell me if I'm thinking properly.
1) My note have stock 4.1.2 rom XXLSA, so I need to flash letest Philz kernel from stock recovery, with is "PhilZ-cwm6-XXLSA-DBT-3.99-signed"
2) Do full backup, and flash latest CM10.1 kernel ("Kernel_CM10.1_Official_20130403_n7000_N8Mali"), reboot recovery into CM cwm
3) Full wipe - wipe data, cache, dalvik-cache
4) install rom zip and next gapps, reboot
Is everything as it should be? And what is N8Mali in cm10.1 name? There are a lot of kernel, so I don't know if this will be ok for me. Thanks for help, and sory for my stupid questions... but I really like to know if I'm doing everything in good way.

You don't need to flash the cm kernel after you flashed the philz kernel.
Sent from my GT-N7000 using Tapatalk 2

I have read somwhere that It is safer to flash from cm kernel, because flashing from philz sometimes goes wrong. But thanks for answer, thats easier without it

So I have another stupid question - If I want to go back to stock android in future, can I just reboot to cm recovery and restore backup of stock rom? Or I have to firstly flash philz kernel to restore?

sinedoOo said:
So I have another stupid question - If I want to go back to stock android in future, can I just reboot to cm recovery and restore backup of stock rom? Or I have to firstly flash philz kernel to restore?
Click to expand...
Click to collapse
Restoring backup in CWM (CM version) will be just fine. Thou, you can flash philz kernel first...but it is not necessary.

So first of all you are on XXLSA and want to flash Liquid smooth 2.2 so here are the steps :
1. download philz kernel for xxlsa .tar from here http://www.mediafire.com/file/wxqlp64nu6s7v66/PhilZ-cwm6-XXLSA-DBT-3.99.tar.md5
2. download odin from here and extract it http://forum.xda-developers.com/showthread.php?t=2189539
3. open odin and click on PDA and insert the .tar Philz Kernel in
4. Go in to download mode with pressing Home+Volume Down+Power
5. Connect your phone with your Computer now odin should say "Added" and click START
6. after flashing the kernel disconnect your phone and let your phone boot it will take some mins
NOW YOU GOT ROOT AND CWM
7. the next step is that you put the liquid smooth 2.2 file and the gapps file in your phone storage
8. open CWM = volume up+home+power
9. Wipe everything
10. go to install zip from sd card after that from internal storage
11. now go to the liquid smooth file and flash it
12. after the liquid smooth file flash the gapps file
13. now reboot !
YOU ARE DONE !!!

i have one suggestion
Format /system, /data, preload (in mount and storage option) after doing wipes .
he need to flash cm kernel for flashing 4.2.2 aosp roms. in philz kernel cm 10.1 base rom installation will fail.
---------- Post added at 12:29 AM ---------- Previous post was at 12:17 AM ----------
Step by step Procedure
1. Flash Philz kernel from Stock recovery
2. Do full backup (backup all apps, sms, contacts etc)
3. Reboot recovery
4. Do a CWM backup
5. Do flash CM Kernel a cm kernel
6. Do wipe data, dalvik-cache
7. Do Format /system, /data, /preload
8. Do wipe cache partition
9. Do flash Liquid smooth rom & Flash Gapps for 4.2.2
Now reboot Phone, All Done. Enjoy new Rom :good::good:

[Q] Unable to install Jellybean

Hi all,
Can someone guide me (step by step) how to install jellybean on my device.
Device details:
Model: Spice Mi410
ROM: MacLite-FB0 v1.3 (GB 2.3.4)
Kernel: Apps_2.6.32.9-perf
CWM: Recovery v5.0.2.3
Baseband: PR232
I want to install "cm-10-Ideos-X6-v0.2".
So, I got the ROM and also got the kernel "35.7-oct.4-cmx" & recovery menuu "Recovery Menu 2.0.0.1 for 4XXX baseband (kernel 2.6.35.7)".
Now, can someone guide me the sequence of operations to install JB?
I tried different combination of sequences CWM, Kernel & ROM but couldn't do it
(If I flash CWM first then I don't get recovery menu again so can't flash the ROM.
If I flash ROM first then it doesn't boot. I can go to the recovery menu and flash the CWM but it didn't help.
Also flashing kernel at all different point, didn't help me.)

1. Put the downloaded new rom. (.zip) to your SD card
2. Install Tjstyle RC3 via SUT 1.8 (RC3 comes with CWM preinstalled.)
3. Go to 'backup and restore ' and take a backup
4. Format Data, Cache and Dalvik
5. Install the zip from SD card
6. Reboot system and you are done
7. Reboot once again and login to your google account
...

Pranjal123 said:
1. Put the downloaded new rom. (.zip) to your SD card
2. Install Tjstyle RC3 via SUT 1.8 (RC3 comes with CWM preinstalled.)
3. Go to 'backup and restore ' and take a backup
4. Format Data, Cache and Dalvik
5. Install the zip from SD card
6. Reboot system and you are done
7. Reboot once again and login to your google account
...
Click to expand...
Click to collapse
Many Thanks Pranjal... took some as I had some problem installing SUT in my windows 8 machine... finally, I could do it with windows 7 machine...
Now on CM10

Great!
Don't forget to hit the THANKS button....

Installed the latest (v.02) CM10 by Dr. Rush... tried the calender thing as suggested... but calender keeps crashing whenever i try to sync with my google account... it says "unfortunately, calender has stopped"
also issue with the camera... doesn't show preview & crashes... similar message "unfortunately, gallery has stopped"
any suggestion on this???

Remove the camera data
And look here - http://forum.xda-developers.com/showpost.php?p=41607437&postcount=116

bhanware said:
Hi all,
Can someone guide me (step by step) how to install jellybean on my device.
Device details:
Model: Spice Mi410
ROM: MacLite-FB0 v1.3 (GB 2.3.4)
Kernel: Apps_2.6.32.9-perf
CWM: Recovery v5.0.2.3
Baseband: PR232
I want to install "cm-10-Ideos-X6-v0.2".
So, I got the ROM and also got the kernel "35.7-oct.4-cmx" & recovery menuu "Recovery Menu 2.0.0.1 for 4XXX baseband (kernel 2.6.35.7)".
Now, can someone guide me the sequence of operations to install JB?
I tried different combination of sequences CWM, Kernel & ROM but couldn't do it
(If I flash CWM first then I don't get recovery menu again so can't flash the ROM.
If I flash ROM first then it doesn't boot. I can go to the recovery menu and flash the CWM but it didn't help.
Also flashing kernel at all different point, didn't help me.)
Click to expand...
Click to collapse
u must update the kernel to .35

[Q] i9070 LightJB v1.2 HELP

Hello guys,
I have my i9070 S advance running on stock android JB. I want to install LightJB v1.2.
I have some questions running in my mind , please clear them :-
1) There is a thread named - [ GUIDE From stock GB to JB ]. I have finished the STEP A of this guide to get in to JB.
Can I proceed to STEP B in order to flash my LightJB ?
2) After completing STEP B , can I download LightJB v1.2 and transfer it to my SD card & then flash it straight away from TWRP ?
3) Before flashing from TWRP, is it necessary to Wipe Cache, Factory Reset and Wipe Dalvik Cache ?
4) What is LightJB exactly ? Does it improve perfomance ? Is it better than stock JB ? Any bugs or issues ?

Fireblaze15 said:
Hello guys,
I have my i9070 S advance running on stock android JB. I want to install LightJB v1.2.
I have some questions running in my mind , please clear them :-
1) There is a thread named - [ GUIDE From stock GB to JB ]. I have finished the STEP A of this guide to get in to JB.
Can I proceed to STEP B in order to flash my LightJB ?
2) After completing STEP B , can I download LightJB v1.2 and transfer it to my SD card & then flash it straight away from TWRP ?
3) Before flashing from TWRP, is it necessary to Wipe Cache, Factory Reset and Wipe Dalvik Cache ?
4) What is LightJB exactly ? Does it improve perfomance ? Is it better than stock JB ? Any bugs or issues ?
Click to expand...
Click to collapse
If you want stock based JB ROM i suggest you one of those:
http://forum.xda-developers.com/showthread.php?t=2342314
http://forum.xda-developers.com/showthread.php?t=2499534
You need to install CoCore kernel (I suggest CWM, not TWRP) http://forum.xda-developers.com/showthread.php?t=2140597
Download, unzip, put on sd card, install Universal kernel flasher and some root explorer (es file explorer for example), install kernel.bin.md5 (from CoCore zip) boot to recovery, install ROM zip, wipe cache, dalvik cache and do factory reset.

[Q] Bricked my GT N7000

Hi guys,
while trying to flash OMNI ROM kikat i bricked my phone.
The phine doesnt go past recovery or download mode. Any zip file i try flash come up with an error. I got rid of the "status7" error but another error came up.
I troed installing various versions on CWM but still wont flash the Omni ROM i downloaded. I also ddnt back up the system before doing this.
Any assistance please?

khakhi said:
Hi guys,
while trying to flash OMNI ROM kikat i bricked my phone.
The phine doesnt go past recovery or download mode. Any zip file i try flash come up with an error. I got rid of the "status7" error but another error came up.
I troed installing various versions on CWM but still wont flash the Omni ROM i downloaded. I also ddnt back up the system before doing this.
Any assistance please?
Click to expand...
Click to collapse
Did u follow this ? Doesn't go past recovery nor download means? You can still access both mode? Worst comes to the worst just flash stock 4.1.2 Samsung Rom using Odin n follow the guide I attached.

Jackwu696 said:
Did u follow this ? Doesn't go past recovery nor download means? You can still access both mode? Worst comes to the worst just flash stock 4.1.2 Samsung Rom using Odin n follow the guide I attached.
Click to expand...
Click to collapse
Howsit bru, sorted....i managed to find a stock Kernerl that i flashed via ODIN...but i will follow ur instructions to flash the OMNI ROM which i have already downloaded and will flash it tonight. i will follow your steps clearly.
Thank you for your help

Howsit bru? i tried following your link to install OMNI ROM but i get an error when flashin Philz recovery. pls help

khakhi said:
Howsit bru? i tried following your link to install OMNI ROM but i get an error when flashin Philz recovery. pls help
Click to expand...
Click to collapse
Please tell me what rom were you on previousy before u had this problem. Can u boot to recovery? If you can, try flashing philz_touch_6.19.3-n7000.zip and reboot to recovery again. After that do all wipes: factory wipe reset n Yes I wanna flash a new rom superwiper. Then wipe dalvik cache. After that flash omnirom. If you still can't proceed, then I suggest you flash stock rom first to let your phone boot to system
Sent from my GT-N7000

Jackwu696 said:
Please tell me what rom were you on previousy before u had this problem. Can u boot to recovery? If you can, try flashing philz_touch_6.19.3-n7000.zip and reboot to recovery again. After that do all wipes: factory wipe reset n Yes I wanna flash a new rom superwiper. Then wipe dalvik cache. After that flash omnirom. If you still can't proceed, then I suggest you flash stock rom first to let your phone boot to system
Sent from my GT-N7000
Click to expand...
Click to collapse
Im back to the stock ROM 4.1.2 and phone is working fine bu t iwant to try the OMNI ROM
When i try flashing Philz recovery i get this error in recovery "Signature verification failed"

khakhi said:
Im back to the stock ROM 4.1.2 and phone is working fine bu t iwant to try the OMNI ROM
When i try flashing Philz recovery i get this error in recovery "Signature verification failed"
Click to expand...
Click to collapse
Ok. So I'll assume u r back to "0". So things to do will be :
1. Root and install custom recovery on your phone. I ALWAYS use older phils recovery + kernel such as PhilZ-cwm6-XXLTA-ATL-5.15.0-signed (XXLTA is based on my stock rom BUILD number. Download according to yours) This will give you root (superuser) & recovery installed.
2. After flashing phils, reboot to recovery by using 3 button combo n do ALL wipes the best being wipe factory + I want to install new rom super wiper + dalvik cache.
3. Flash my previous post mentioned phils advanced recovery ( I Always use that vers. N NO error whatsoever) reboot to recovery again n flash your omnirom.
4. DONE
Sent from my GT-N7000

Help with installation of custom ROM Xperia SP

Hi!, now that we have been abandoned officially by sony, i want to instal this one: [ROM][4.4.4][L/U BL ] Broken OS 1.4 [Huashan]
I tried once with CWM,
1. Download the ROM and latest Gapps package :good: and already on my sdcard
2. Reboot to recovery(only TWRP/CWM Touch/PhilZ is supported) :good:
3. Format /system, wipe data :good:
4.With CWM Flash ROM,, when i did these step an error happened and i was stuck in sony screen so i had to repair the phone with pc companion
My current state is :
Stock rom .205, rooted with superSU, and installed the CWM 4.4.1.
Plz this is going to be the first time i try to install a custom rom so i will greatly thankfull if you use deep deails about the process.
Thanks a lot for you help!

johancamo1 said:
My current state is :
Stock rom .205, rooted with superSU, and installed the CWM 4.4.1.
Plz this is going to be the first time i try to install a custom rom so i will greatly thankfull if you use deep deails about the process.
Click to expand...
Click to collapse
Forgot to say that my bootloader is locked!! and looks like cannot be unlocked :s

johancamo1 said:
Hi!, now that we have been abandoned officially by sony, i want to instal this one: [ROM][4.4.4][L/U BL ] Broken OS 1.4 [Huashan]
I tried once with CWM,
1. Download the ROM and latest Gapps package :good: and already on my sdcard
2. Reboot to recovery(only TWRP/CWM Touch/PhilZ is supported) :good:
3. Format /system, wipe data :good:
4.With CWM Flash ROM,, when i did these step an error happened and i was stuck in sony screen so i had to repair the phone with pc companion
My current state is :
Stock rom .205, rooted with superSU, and installed the CWM 4.4.1.
Plz this is going to be the first time i try to install a custom rom so i will greatly thankfull if you use deep deails about the process.
Thanks a lot for you help!
Click to expand...
Click to collapse
Hello, I have seen, it is the first time you are installing a rom. So please be careful!
You must read exactly the Instruktions from the OP.
Hello,
2. Reboot to recovery(only TWRP/CWM Touch/PhilZ is supported)
Go here: http://forum.xda-developers.com/showthread.php?t=2649923
CWR you have used does not work for flashing the rom :angel:
Btw, when you are flashing a rom for the first time, and you have less experience with roms you should to consider, if you take another rom. For the rom you choosed is still in Beta status!
Take a stable or nightly rom. Anyway you have at least to install CWR from the above Link.
Good luck!

reinipic said:
Hello, I have seen, it is the first time you are installing a rom. So please be careful!
You must read exactly the Instruktions from the OP.
Hello,
2. Reboot to recovery(only TWRP/CWM Touch/PhilZ is supported)
Go here: http://forum.xda-developers.com/showthread.php?t=2649923
CWR you have used does not work for flashing the rom :angel:
Btw, when you are flashing a rom for the first time, and you have less experience with roms you should to consider, if you take another rom. For the rom you choosed is still in Beta status!
Take a stable or nightly rom. Anyway you have at least to install CWR from the above Link.
Good luck!
Click to expand...
Click to collapse
I used an old version of CWM maybe thats why :crying:
YES!! I have the ones you recommended installed already!, :laugh:
So can i just install the latest nighly ??? (for me instaling is doing the installation from the recovery is the same as flashing?)
Im in stock rom so can't really understand about the kernel, if I install the nightly or these one, have the kernel included?, or do i have to install the kernel? (and how??? these step is done with flashtool right?)

johancamo1 said:
I used an old version of CWM maybe thats why :crying:
YES!! I have the ones you recommended installed already!, :laugh:
So can i just install the latest nighly ??? (for me instaling is doing the installation from the recovery is the same as flashing?)
Im in stock rom so can't really understand about the kernel, if I install the nightly or these one, have the kernel included?, or do i have to install the kernel? (and how??? these step is done with flashtool right?)
Click to expand...
Click to collapse
Yes hou have had the wrong CWM. Herewith you can install (Flash=same) every rom you want (build for LOCKED BOOTLOADER)! Forget it with the kernel. On locked bootloader you cannot install any other kernel. The kernel you need for a rom is included in the rom!
And again: When you flash a new rom - read the instructions from the OP :fingers-crossed:
Cheers.