Related
Hallo,
sorry for my bad English. I have translate my Problem with promt . I have flash my Tab with JM6. After the flash my Tab do not boot. On the tab is a picture, a yellow triangle and a PC are indicated. Get with Odin 3 1.7 following error message.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
nothing functions. Over and over again mistake with Odin. I hope you can help me.
Have you tried recovery
Sent from my GT-I9000 using XDA App
thank you for your answer.
no, what must i do?
wheel14 said:
nothing functions. Over and over again mistake with Odin. I hope you can help me.
Click to expand...
Click to collapse
after you're flashing with Odin, then restating automatic in download mode, press the power button for 10 seconds (until tab will switch off), then restart by pressing the power button together with volume up. wait until finishing installing of CSC and then will restart by it self.
check my tread
sorry, but it dons´t work. I have this error....
http://forum.xda-developers.com/showthread.php?t=888071
wheel14 said:
sorry, but it dons´t work. I have this error....
http://forum.xda-developers.com/showthread.php?t=888071
Click to expand...
Click to collapse
I had the same situation, just take a look here. try to don't panic... try to follow my steps described in the tread and you might be succeed. I hope it help
I do not look though there sorry. I am in panic..which step....is the right?
i have flash the pit-file only. ist this right? and now?
wheel14 said:
I do not look though there sorry. I am in panic..which step....is the right?
Click to expand...
Click to collapse
try to look here and here
thank you.. I have flah the pit File only. now i will flash the pda without the pit. re-partition will be not selected. is this right. thank you for your help
hallo, the flash is ok. but after he will not finalize the installation of CSC and PDA after restart with recovery modus.
wheel14 said:
hallo, the flash is ok. but after he will not finalize the installation of CSC and PDA after restart with recovery modus.
Click to expand...
Click to collapse
I can't get you....can you describe a little what have you done? you're saying that you flash the firmware with Odin, right? and then? have you restarted in recovery mode? or you boot the phone loading the OS.....you should restart directly in recovery mode in order to finalize the installation of PDA and CSC....
Good Morning,
after flash from JMD and Pit i am flash the dbdata. At now the Tab works greatly. Thank you for your help.
wheel14 said:
Good Morning,
after flash from JMD and Pit i am flash the dbdata. At now the Tab works greatly. Thank you for your help.
Click to expand...
Click to collapse
Welcome back in our family.
I bought a New Samsung Galaxy TAB, just two days back, from Amazon.com and was shipped to Washington DC. It's an unlocked version that has no Operator logos on it. It was indeed an awesome thing until I used my magic hands on it only 15 hours after I received.
I had a problem with Arabic Characters; they were disconnected and sometimes reversed. So, I searched over the net for one day and chose to install a ROM from Samfirmware.com. I chose the latest firmware from the table of arabic firmwares. It's P1000JPJM5. (P1000JPJM5 ## P1.PIT Version 2.2 2011 January), so here are the steps that I've gone through:
1. Download the firmware.
2. I use the Odin 1.7 and applied the PIT file first. It finished successfully in 11 seconds.
3. I put the Galaxy tab in the Download mode (decrease volume + Power).
4. I applied the PDA using the Odin 1.7, I chose the TAR file that came with the P1000JPJM5 downloaded file.
5. A light blue indicator started just below the Download logo, the indicator progressed cheerfully, but suddenly stopped. I checked the Odin, and found a "FAILED!" sign. I searched the log, and found the following error:
<ID:0/045> cashe.rfs
<ID:0/045> Modem.bin
<ID:0/045> Complete(Write) Operation failed
<ID:0/045> All threads completed. (Succeed 0/ Failed 1)
attached is a jpg file having the error exactly.
6. Regardless of the warning saying "Don't unplug the target" or whatever it said by that time, and since the application of the firmware stopped, I unplugged the USB cable. I did that after waiting for 20 minutes whereas the Galaxy Tab didn't show any response but that download logo and the non-moving indicator.
7. After I did that, the Galaxy Tab became dead. Whenever I attach it to the computer, it displays a 3 icons screen; a computer, a phone, and a warning triangle with an exclamation mark. I assume that this means that there is an error in the connection between the Tab and the computer.
8. No matter how many times I tried the Download, recovery or any other thing, the phone would only display one of two things, the 3 icons screen that I listed in the previous step, or the Battery screen showing a grey battery.
HELLLLLP!!!!
Regards,
Khatypically.
Go to samfirmware.com download the files for your device.
Select pit file then check repartition - flash
Select pda csc modem, uncheck repartition - flash.
Good luck! If you get any trouble send me a msg. on skype luc_de_mar
khatypically said:
I bought a New Samsung Galaxy TAB, just two days back, from Amazon.com and was shipped to Washington DC. It's an unlocked version that has no Operator logos on it. It was indeed an awesome thing until I used my magic hands on it only 15 hours after I received.
I had a problem with Arabic Characters; they were disconnected and sometimes reversed. So, I searched over the net for one day and chose to install a ROM from Samfirmware.com. I chose the latest firmware from the table of arabic firmwares. It's P1000JPJM5. (P1000JPJM5 ## P1.PIT Version 2.2 2011 January), so here are the steps that I've gone through:
1. Download the firmware.
2. I use the Odin 1.7 and applied the PIT file first. It finished successfully in 11 seconds.
3. I put the Galaxy tab in the Download mode (decrease volume + Power).
4. I applied the PDA using the Odin 1.7, I chose the TAR file that came with the P1000JPJM5 downloaded file.
5. A light blue indicator started just below the Download logo, the indicator progressed cheerfully, but suddenly stopped. I checked the Odin, and found a "FAILED!" sign. I searched the log, and found the following error:
<ID:0/045> cashe.rfs
<ID:0/045> Modem.bin
<ID:0/045> Complete(Write) Operation failed
<ID:0/045> All threads completed. (Succeed 0/ Failed 1)
attached is a jpg file having the error exactly.
6. Regardless of the warning saying "Don't unplug the target" or whatever it said by that time, and since the application of the firmware stopped, I unplugged the USB cable. I did that after waiting for 20 minutes whereas the Galaxy Tab didn't show any response but that download logo and the non-moving indicator.
7. After I did that, the Galaxy Tab became dead. Whenever I attach it to the computer, it displays a 3 icons screen; a computer, a phone, and a warning triangle with an exclamation mark. I assume that this means that there is an error in the connection between the Tab and the computer.
8. No matter how many times I tried the Download, recovery or any other thing, the phone would only display one of two things, the 3 icons screen that I listed in the previous step, or the Battery screen showing a grey battery.
HELLLLLP!!!!
Regards,
Khatypically.
Click to expand...
Click to collapse
Sent from my GT-P1000 using XDA App
Thanks Lucian, This is exactly what I did in the first place. Used Odin 1.7 and applied the PIT file coming with it, then applied the P1000JPJM5 PDA and CSC modem file.
Unless the P1000JPJM5 is not for my device?? How to know?
Lucian, any clue?
My tab is dead after I tried to install an arabic firmware from samfirware.com. I bought my tab originally from the US. Now, I'll download the "suitable" firmware from samfirmware.com as you advised, but How would I ever know the suitable firmware given that my device is exactly this one (that's where I bought)(my devise is dead now and can only display the download mode):
www .amazon. com /GALAXY-TAB-P1000-16GB-UNLOCKED/ dp /B004AKOVIS/ ref=sr_1_1?ie=UTF8&s=electronics&qid=1305378100&sr=8-1
Regards,
Khatypically, alive with a zoombie tab
totally unresponsive tab
I have been searching around forums looking for advice and have been unable to locate a solution so here seems as good a place as any to ask for help. I have an unlocked gtp-1000 that has been running overcome 1.4.5 for last month very nicely until tonight when I thought it would be a good idea to get some gingerbread goodness like I have been using on my nexus one. was going to flash Overcome ROM v2.0.0 BETA 2 and was following guide but only got halfway through flashing stock gingerbread with odin when laptop unexpectedly did a restart for an unknown reason while I was away getting a snack. was unsure whether flashing process had been completed so opened odin again and tried reflashing. couldnt get past
setup connection...
so tried to reboot into download mode and then powered down. now tab is dead. battery was at 80% when it died
before I take back to samsung tomorrow any ideas?
I have plugged into wall charger= nothing
plugged into laptop=nothing and not detected
held power and volume up=nothing
held power and volume down=nothing
held power and volume up & home=nothing
no sounds or anything at all on screen
truly bricked?
Updates:
Hi Guys,
I applied the p1000nubjm2 firmware. I downloaded it from samfirmware. It's the latest P1000L firmware for America/Australia. It failed in the PDA file: P1000NUBJM2_P1000NUBJM2_P1000NUUBJM2_HOME.TAR . I was planning to apply the gingerbread update after that.
Now to the results, As you know, before, I was able to reach the download mode, the startup Galaxy Tab/Samsung screen, and the battery displays when connecting the cable. Now, after application of this lovely firmware and failure, nothing (literally "Nothing") takes place. The device became more dead than it was before . It doesn't display anything and it doesn't respond to power or displays the battery. It became a black $500 cost brick No matter how much time I keep it charging (or what "should be" charging), it would never startup again (sigh!) The ODIN and samsung kies no more recognize the device when connected to the computer.
Any additional clues before I decide to convert it to a teacup base?
Regards,
ARK
Good Day All :
I started up with Odin so i could update the Tab, but the program closed down about 1-2 sec. after. When I tried to turn on the tablet, there was ... no reaction (!)
Tried to go in "download mode", but no reaction or by factory-reset. just black screen ...
i also tried "Recovery Code" (Hold the Vol Down Key + Vol Up Key + Power Key for 15 seconds then release) but its same no reaction.
Can it really be true that I have ended up with a piece of useless plastic?
Pls your help is vevry important
thanks
Do not panic.
Better connect to wall charger for an hour first; then try recovery mode (volume up + power).
Regards
Kongar
thanks for the reply.
it was in the wall charger for an 7 hour . i just try ... nothing happend ...
It sounds like you have stopped it in the middle of loading the bootloaders... That almost the only way to hard brick your tab...
If you can't get it recognised by ODIN then the only thing available is to JTag it. You need to send it in to someone who can do this - look around the general forum, there was someone there doing it - most phone repair places will say it needs motherboard replaced, expensive.
If its still in warranty, you might be able to send back to samsung, tell them it happened while flashing through Kies.... Don't tell them you flashed with ODIN.
Seems like a few people are doing this...
Good Luck...
ok, now after i update the PIT the GT is boteabel but its hange in the startup page GALAXY Tap.
Note : Every time i but the GT in the Dawnloading Mode and try to flash a rom i get faild in kernel stage.
any help Pls ...
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> zImage
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that is mean the kernel is not signed
http://forum.xda-developers.com/showthread.php?t=1133590
check here
thanks Dude for the information. i think my solution somewhere in that post but i am new with Samsung GT. i can’t understand anything of that post.
can someone Pls explain to me how to do it in step by step
Thanks
ok, i think i get it . i will do that way and i will see what happend with me ...
Fainaly My Tab Is working .......
thanks every one
ksadude said:
Fainaly My Tab Is working .......
thanks every one
Click to expand...
Click to collapse
glad to see you up and running
an advice , if you are in froyo before flashing un Official roms\kernels please patch the bootloader apk before you go through anything , if you are now at gingerbread then flash wtf is coming in your way but only what made for your tab
Flash Safe
how come when i d/l a kernel
I897UCKJ3 Android 2.3.5 Gingerbread
Stock
from http://forum.xda-developers.com/showthread.php?t=1300843
it's a 6mb file or something. How do i use a .tar? I tried opening Odin 1.85. but what do i load it as? PDA, PHONE?
Sincerely,
Semi-confused
like Boog's KJ3 Kernel. I don't have CWM, so i need to flash that kernel to move on with Illuimance. But how do i used ODIN to do that?
Place kernel in PDA and hit start. (MAKE SURE repartition is UNchecked).
i did, but it doesn't do anything to the phone.
Debugging or DL?
ODIN recognizes phone in debugging, but not DL mode for some reason...
repartition unchecked, and the .tar loaded to PDA slot.
i click start, but it just says (.../failed 1)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Put your phone in download mode first.
You have to be on download mode. Try rebooting your computer or using main USB port. Also checking drivers and cable also helps.
sent from awesomness
U have to be in download mode. Right click on Odin and run it as admin, also if it still fails try a different primary usb port (1st one on a laptop or the ones in the back of pc that connect to the motherboard). Removing sdcard (if u have one) and sim wouldn't hurt if ur still facing issues.
Dang it viny beat me to it
i run "I897UCKJ3 Stock without BL" as admin
i put phone in download mode (hold vol + and -, plugin usb, put in battery)
but nothing happens with ODIN
i changes USB ports, and now it shows up in ODIN. But it is stuck at :
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
ccamwilkins said:
i run "I897UCKJ3 Stock without BL" as admin
i put phone in download mode (hold vol + and -, plugin usb, put in battery)
but nothing happens with ODIN
Click to expand...
Click to collapse
Do U see a yellow indicator on Odin saying something like COM6 or some other number? If not than Odin is not seeing ur phone....high chances of faulty data cable...happened to me....i changed the cable worked like charm
EDIT: Even the above scenerio can be caused by faulty cable
yeah it sees it as COM5.
i plugged the phone in (download screen didn't pop up) but ODIn still recognized it, i hit start, and it's working now (just a blue status bar progressing across the bottom) So i guess it's going to work now? odd...
thanks though. I've had crazy misfortune with this phone so far.
yep... working like a charm. (finally)
Don't get me wrong, we are glad to help you and everyone else, but pls do a lil reading before u start flashing things next time (for your sake). These questions are answered almost if not daily, the first 2 pages usually have ur answers, if not then use the search button.
yes... it is working
Hello All,
I tried flashing my phone (to I9000XXJVS)
I've only gotten to step 11, which flashes the phone.
In ODIN, I selected PIT, PDA, PHONE and CSC. All 4 had files.
I selected the following options:
Re-Partition, Auto Reboot and F. Reset Time
While flashing, I got the following messages
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> factoryfs.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> cache.rfs
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
I switched off the phone and tried to turn it back on.
It won't come one at all. It's not showing anything.
It won't even go into recovery mode.
It won't go into download mode.
Pls help.
Take the battery out for 15 minutes and then replace and see if it powers back on.
If it still wont turn on or go into download mode using the key combination then try using a USB JIG.
What rom did you try flashing?
I'm trying to go to Gingerbread 2.3.5 I9000XXJVS.
I waited 15 mins. Still nothing.
Even when I put in the cable through USB, nothing shows up. Normally it shows that it's charging.
See screenshot of my ODIN configuration while flashing:
Try and plug your phone into the PC and then try the 3 button combo with the cable attached.
No difference. Still won't come on.
I hope the board is not fried.
Very strange...
I cant view the image you posted at the moment to see if files were put in the right places because im on works ancient internet browser but from what you wrote in the OP the flash appears to have gone ok...
Might be worth getting a JIG and trying that. If that doesnt work maybe its time for the unbrickable mod.
REALLY stupid question but you have flashed the right firmware for your device right?
I would give the JIG a try. You can buy one from ebay for like less than £5 GBP or you can throw one together youself.
Did the phone reboot fully after the flash before you turned it back off?
Yes, the flash went OK.
What do you mean by the right firmware? I got the firmware from samfirmware. I actually new to this.
And what's a JIG? How do I put one together?
The phone didn't reboot. The screen was blank but kinda slightly lighted. So I tried powering it up but it didn't so I removed the battery.
I got the JIG. I'll try to build one myself.
I'll let you know if it works.
One more thing: the battery was kinda low when I started this operation.
I'm thinking maybe the battery ran out.
But it's not even charging when I plug it in.
What i mean is do you have an i9000 and not an i9000M or another variant of the i9000 and have tried to flash a firmware from an i9000 onto an i9000M or i9000B for example.
I wish i could see that picture you posted to have a better look.
In the PDA box you should have had a file called PDA or CODE... The modem box should have had MODEM or PHONE... and then CSC should have had CSC...
There should have been a PIT file in the PIT box...
You should have had repartion ticked... auto reboot ticked and auto F reset ( ithink its called that ) ticked.
The update bootloader and other check boxes that are below the 3 i mentioned should all have been unticked.
I use a GT-i9003
in PDA i have CODE...
in PHONE i have MODEM...
in CSC i have GT...
in PIT i have a .pit file
I had all three boxes ticked (Re-Partition, Auto Reboot, F. Reset Time)
All other checkboxes were unchecked.
It looks like you have flashed incompatible firmware onto your device.
You have flashed firmware for the i9000 which wont work on the i9003.
You have gone into the wrong section on Samfirmware.com. There is a seperate section for the i9003.
You can still try the JIG trick but im not sure if that will work either on your device as the hardware may be slightly different and require a different resistor value to force download mode but im not sure about that part...
It looks like you have flashed bootloaders onto your device that wasnt designed for it which could mean a hard brick.
Maybe the unbrickable mod will help you out.
Im not too sure how to help you from this point on im afraid if you cant get download mode working...
Have a good search through google and see if you can find any helpful information.
Other thing is to say you had an update for it and it broke your phone and try and play dumb and see what happens =/.
I hope you can get it sorted mate.
hi there..
since i bought my phone it never got a firmware update, neither OTA nor a manual one. It came and stayed with android 2.2 with all these years.
Now that i am more into android i decided to use a custom rom, this one = http://forum.xda-developers.com/showthread.php?t=2012061
But before flashing this rom i had to flash it with an official 2.3 rom, since it was one of the requirements and it still had a 2.2 in it.
I went to samobile, grabbed this rom http://www.sammobile.com/firmwares/3/?download=4340, plus a .PIT that was necessary according to the tutorial i was following.. and on the first attempt i got the error and the device got bricked.. So i tried, and tried, and tried... but i always end up getting the same error within Odin. This one:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> __Xmit Write fail
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
The device is now bricked, i can't even enter in downloadmode anymore, so i bought a USBJIG to enter in downloadmode and it works, but i still get the same error when trying to flash. I've tried dozens of different roms (of course all of them were made for this device), different versions of Odin, different USB port, Samsung Kies is installed but it is completely closed. I don't know what else to do, i need help... Please help?
xcaninox said:
I've tried dozens of different roms (of course all of them were made for this device), different versions of Odin, different USB port, Samsung Kies is installed but it is completely closed. I don't know what else to do, i need help... Please help?
Click to expand...
Click to collapse
you cannot use i9000 ROM's only i9000B ROM's, you need to kill KIES , Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
preferably use Odin 1.85 or 3.04
FIRST STEP for ALL Problems:-
Whenever you have a problem with your Phone, power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and trying any solution
First reboot PC after a power cord unplug and also reboot the Phone after a battery pull. Always use a Fresh Odin after any attempt to flash, than make sure you "Uncheck Repartition", If you had checked it or clicked PIT when you are not using one. You should also be running Odin as an Admin and ensure that KIES is not running when using Odin. Most of all, only use Samsung USB cable and not others as they may be incompatible and trying it out on a lap top or another PC ( when it happens repeatedly)
i discovered what was causing the error. it was Windows 8, samsung drivers are not working correctly on it, i don't know if this is a localized or a global problem... my guess is it is a global one
i had Kies installed in windows 8,and all its process were killed before flashing pretty much on all of the time i was trying to flash.
yesteday by pure luck my sister came to my house for a visit, and she had hers notebook with her that btw has windows7, so i decided to try flashing the phone through it, i grabbed it installed samsung drivers and didn't install Kies, surprisingly, for me at least, the flashing went perfectly OK on the first attempt.
after the flash i had one error, "couldn't mount db/data", i googled it and easily fixed it already, but that is another thing for another thread.
thank you for helping
xcaninox said:
i discovered what was causing the error. it was Windows 8, samsung drivers are not working correctly on it, i don't know if this is a localized or a global problem... my guess is it is a global one
Click to expand...
Click to collapse
All PC's running any version of windows seem to get USB connection problems at one time or the other But lap tops and notebooks seldom have this problem.