Database Develop

[q] help please!!

I have a problem and I do not know how to solve it so I ask for help... I can't install Android 2.3.6 XXJVU over Odin... all I did as instructed and Odin can't perform the operation... My Odin prints this...
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Chek MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CODE_I9000XXJVU_CL851880_REVO3_user_low_
<OSM> End... Why? Please help!

Corrupt download, download it again.

Help please :/
beardedwonder said:
Corrupt download, download it again.
Click to expand...
Click to collapse
what i must download again? XXJVU or??

SeeZaar said:
what i must download again? XXJVU or??
Click to expand...
Click to collapse
The file is not downloaded properly so download it again and then try to flash it

pozz
my problem is solved... problem has been that he did not extract properly... thanks anyway...

[Q] Question.

I was wandering if anyone could create a backup from from the firmware that I will provide, since I can´t load my phone using Odin 4.07 because it will crash and close on my PC, so all I need is to someone to load it into their Ace, use CWM to create a backup rom, and load it here so I can just use my CWM and load it into my phone?
Here´s the firmware, if any one would like to help me recover my phone to it´s original fw, since this wasn´t in Samfirmware.
http://www.hotfile.com/dl/184799313/0a34cc8/S5830MWHLK2_S5830MICELK1_ICE.zip.html

Mike02x said:
I was wandering if anyone could create a backup from from the firmware that I will provide, since I can´t load my phone using Odin 4.07 because it will crash and close on my PC, so all I need is to someone to load it into their Ace, use CWM to create a backup rom, and load it here so I can just use my CWM and load it into my phone?
Here´s the firmware, if any one would like to help me recover my phone to it´s original fw, since this wasn´t in Samfirmware.
http://www.hotfile.com/dl/184799313/0a34cc8/S5830MWHLK2_S5830MICELK1_ICE.zip.html
Click to expand...
Click to collapse
LOL!!! ODIN 4.07 WHAAT???
Did you try using Odin 4.38????

Viper The Ripper said:
LOL!!! ODIN 4.07 WHAAT???
Did you try using Odin 4.38????
Click to expand...
Click to collapse
My bad, I meant Odin 4.38 and also Odin 3.07.

flashing other device nandroid backup can cause problem try using odin in some other pc

Mike02x said:
My bad, I meant Odin 4.38 and also Odin 3.07.
Click to expand...
Click to collapse
Unistall kies and samsung drivers, reboot your PC and install the lastest driver update then try again
You can flash a custom rom too via recovery

manoj94 said:
flashing other device nandroid backup can cause problem try using odin in some other pc
Click to expand...
Click to collapse
Thanks!
Will try in another device!
Also this is what happens, when I try to use Odin3 v1.85
Code:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLK2_S5830MICELK1_S5830MWHLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
And it just hangs in there forever!
Thanks!

Mike02x said:
Thanks!
Will try in another device!
Also this is what happens, when I try to use Odin3 v1.85
Code:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLK2_S5830MICELK1_S5830MWHLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
And it just hangs in there forever!
Thanks!
Click to expand...
Click to collapse
... Is your phone model GT-S5830? or GT-S5830M?? Beacuse I think you are flashing an incorrect firmware or .ops file or whatever related with your device model so check out carefully

Viper The Ripper said:
... Is your phone model GT-S5830? or GT-S5830M?? Beacuse I think you are flashing an incorrect firmware or .ops file or whatever related with your device model so check out carefully
Click to expand...
Click to collapse
GTS5830

Mike02x said:
GTS5830
Click to expand...
Click to collapse
So that's what I was saying you, this firmware (S5830MWHLK2_S5830MICELK1_ICE.zip) is a GT-S5830M firmware!! Please go to sammobile and download a correct firmware!!

Mike02x said:
Thanks!
Will try in another device!
Also this is what happens, when I try to use Odin3 v1.85
Code:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLK2_S5830MICELK1_S5830MWHLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
And it just hangs in there forever!
Thanks!
Click to expand...
Click to collapse
here s detailed instruction with files http://yagyagaire.blogspot.in/2012/03/upgrading-galaxy-ace-to-s5830ddkq8.html#.Ub00ClyVhw0

manoj94 said:
here s detailed instruction with files http://yagyagaire.blogspot.in/2012/03/upgrading-galaxy-ace-to-s5830ddkq8.html#.Ub00ClyVhw0
Click to expand...
Click to collapse
Well, I think we've a great tutorial HERE so...

ATT SM-G925A keeps failing odin

Im having a trouble time trying to restore my att s6 edge. I downloaded the driver and the fast boot. I power into download mode. the stock firmware im using is G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar. Everytime i tired to load 4 files i notice it would freeze for a sec then load the files. Everytime i start the flash i get this,
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G920AATT1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Idk why this is happening. My only guess is im not using the right files. Has anyone else run this this issue.

xxsam34 said:
Im having a trouble time trying to restore my att s6 edge. I downloaded the driver and the fast boot. I power into download mode. the stock firmware im using is G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar. Everytime i tired to load 4 files i notice it would freeze for a sec then load the files. Everytime i start the flash i get this,
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G920AATT1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Idk why this is happening. My only guess is im not using the right files. Has anyone else run this this issue.
Click to expand...
Click to collapse
you need Odin 3.10.06 not sure what you meant by fast boot AND you're using the wrong firmware that's for the flat s6 you need the G925A firmware here
http://forum.xda-developers.com/showthread.php?t=3119235

s6freak said:
you need Odin 3.10.06 not sure what you meant by fast boot AND you're using the wrong firmware that's for the flat s6 you need the G925A firmware here
http://forum.xda-developers.com/showthread.php?t=3119235
Click to expand...
Click to collapse
Thanks i will try this and hope it works. never mind the fastboot.

So i tried that firmware and still no go. I did notice that the firmware is G925AUCU2AOF3 and ATT hasnt relase it online. Also has any one have issue signing into their samsung account once you do a hard reset. I keep getting a processing fail even tho im able to sign in on my pc. Thanks

xxsam34 said:
So i tried that firmware and still no go. I did notice that the firmware is G925AUCU2AOF3 and ATT hasnt relase it online. Also has any one have issue signing into their samsung account once you do a hard reset. I keep getting a processing fail even tho im able to sign in on my pc. Thanks
Click to expand...
Click to collapse
it's not OF3 it's OE2
are you using Odin 3.10.6?
are you unzipping and placing the 4 files in there prospective slots?
I've had to Odin over 20 times due to testing and I know it works.
---------- Post added at 05:30 AM ---------- Previous post was at 05:24 AM ----------
you can Odin back to OCE using this thread
http://forum.xda-developers.com/showthread.php?p=60704484

s6freak said:
it's not OF3 it's OE2
are you using Odin 3.10.6?
are you unzipping and placing the 4 files in there prospective slots?
I've had to Odin over 20 times due to testing and I know it works.
---------- Post added at 05:30 AM ---------- Previous post was at 05:24 AM ----------
you can Odin back to OCE using this thread
http://forum.xda-developers.com/showthread.php?p=60704484
Click to expand...
Click to collapse
I apprieciate that your helping this much. So i tried what you told me and im still getting this fail. Driving me nuts made sure the driver is installed using the original usb and tried a different one and still.

xxsam34 said:
I apprieciate that your helping this much. So i tried what you told me and im still getting this fail. Driving me nuts made sure the driver is installed using the original usb and tried a different one and still.
Click to expand...
Click to collapse
you're putting the same entire tar in each slot you have to unzip the tar and you'll find the 4 separate files to correspond to each slot

s6freak said:
you're putting the same entire tar in each slot you have to unzip the tar and you'll find the 4 separate files to correspond to each slot
Click to expand...
Click to collapse
im confused i extract the zip folder that has the 4 files and load each one to the proper spot. Im not loading the same file on all spot. The picure shows whats files im loading.

try doing all but the bootloader.
I'm using my phone looking at your screen shots so it's hard to tell. looks like you have taken the OF3 update so I'm not sure you can downgrade. But try without bootloader
---------- Post added at 04:35 PM ---------- Previous post was at 04:27 PM ----------
s6freak said:
try doing all but the bootloader.
I'm using my phone looking at your screen shots so it's hard to tell. looks like you have taken the OF3 update so I'm not sure you can downgrade. But try without bootloader
Click to expand...
Click to collapse
these are the OE2 files try all four files of these
http://forum.xda-developers.com/showthread.php?t=3119235

unfortently same results.... i used odin multiple time with my other andriod devices but this is my first time having this much trouble. i did take a screenshot on what my att s6 edge and notice when it fails i get theis screen.

xxsam34 said:
unfortently same results.... i used odin multiple time with my other andriod devices but this is my first time having this much trouble. i did take a screenshot on what my att s6 edge and notice when it fails i get theis screen.
Click to expand...
Click to collapse
Make sure your drivers are up to date. However if you've taken the latest OF2 update that might be the problem as well.
I haven't taken it.
Use the OE3 files but the bootloader try that

s6freak said:
Make sure your drivers are up to date. However if you've taken the latest OF2 update that might be the problem as well.
I haven't taken it.
Use the OE3 files but the bootloader try that
Click to expand...
Click to collapse
Thats what it seems. I have the lastest version but att hasnt release the firmware to the public. i will look for the OE3 files and try that. Also i made sure all drivers are up to date.

xxsam34 said:
Thats what it seems. I have the lastest version but att hasnt release the firmware to the public. i will look for the OE3 files and try that. Also i made sure all drivers are up to date.
Click to expand...
Click to collapse
Deleted
---------- Post added at 01:40 AM ---------- Previous post was at 01:28 AM ----------
xxsam34 said:
Thats what it seems. I have the lastest version but att hasnt release the firmware to the public. i will look for the OE3 files and try that. Also i made sure all drivers are up to date.
Click to expand...
Click to collapse
here ya go latest files and thread
http://forum.xda-developers.com/showthread.php?t=3156221
---------- Post added at 01:58 AM ---------- Previous post was at 01:40 AM ----------
s6freak said:
Deleted
---------- Post added at 01:40 AM ---------- Previous post was at 01:28 AM ----------
Deleted it's for the G920A my bad
Click to expand...
Click to collapse

s6freak said:
Deleted
---------- Post added at 01:40 AM ---------- Previous post was at 01:28 AM ----------
here ya go latest files and thread
http://forum.xda-developers.com/showthread.php?t=3156221
---------- Post added at 01:58 AM ---------- Previous post was at 01:40 AM ----------
s6freak said:
Deleted
---------- Post added at 01:40 AM ---------- Previous post was at 01:28 AM ----------
Deleted it's for the G920A my bad
Click to expand...
Click to collapse
NP i kind of figure it was. I tried everything i think its the firmware so hopfully att will release the lastest one soon. Thanx tho
Click to expand...
Click to collapse

I'm having the same or similar issue. Please help! This is driving me nuts!
Please help, trying to revert to stock firmware so I can use PingPong but Odin just keeps failing. Installed the USB drivers but this is all I get in Odin, any ideas?? Thanks!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925AUCU1AOCE_CL4351102_QB4488922_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!
---------- Post added at 07:30 PM ---------- Previous post was at 07:11 PM ----------
Also if it helps the message my phone is giving me after this fails is: SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1

arch3lau5 said:
I'm having the same or similar issue. Please help! This is driving me nuts!
Please help, trying to revert to stock firmware so I can use PingPong but Odin just keeps failing. Installed the USB drivers but this is all I get in Odin, any ideas?? Thanks!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925AUCU1AOCE_CL4351102_QB4488922_REV02_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!
---------- Post added at 07:30 PM ---------- Previous post was at 07:11 PM ----------
Also if it helps the message my phone is giving me after this fails is: SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Click to expand...
Click to collapse
have you taken the OF3 udate?

s6freak said:
have you taken the OF3 udate?
Click to expand...
Click to collapse
Yes it appears I am on OF3. Not intentionally actually, I don't recall doing any OTA update lately. Regardless, will OF3 prevent me from flashing with Odin?

arch3lau5 said:
Yes it appears I am on OF3. Not intentionally actually, I don't recall doing any OTA update lately. Regardless, will OF3 prevent me from flashing with Odin?
Click to expand...
Click to collapse
it will prevent you from using Odin to flash anything other than OF3

[Stock Firmware] SM-T807A - T807AUCS1CPI9_T807AATT1CPI9 - Marshmallow

Hello, friends.
I've managed to pay and downloaded the latest firmware.
Please note, that it's not an update, you device will be renewed and all user data will be lost.
To install:
1. Extract TAR files from the RAR archives
2. Reboot the device to DOWNLOAD mode
HOW TO ENTER DOWNLOAD MODE ON SAMSUNG GALAXY TAB S 10.5
You must start by turning the Samsung Galaxy Tab S off completely. You can do that one of two ways: quickly press the Power button and then select the ‘Switch Off’ option from the menu. Alternatively, you can long-press the Power button and it will eventually turn off. Just make sure it’s not sleeping and is all the way off.
Now reboot the Samsung tablet holding the Power and Volume Down buttons. Some version might need the Power + Volume Down + Home button.
Wait for the screen to change before letting go of the buttons. You should see the screen telling you it’s ‘downloading’ .
Press the Volume Up button to continue past this point.
Once you have pressed the Volume Up button you should see the warning message leaving the Samsung tablets display.
Now you are ready to connect the Samsung Galaxy tab S to the computer and use the device in download mode
3. Connect the device to a USB port of PC
4. Download and run ODIN
5. Place
BL_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the BL slot
AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the AP slot
CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the CP slot
CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the CSC slot
6. click START
DOWNLOAD:
BL_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

Just don't flash the CSC part to keep data.

Loaded it and working fine here. Thanks!

Amazing
Just wanted to say thanks to you & @ashyx. Made a donation. Unfortunately, I didn't see either of your threads until today, as I had given up some time ago on anyone posting any workable images for the T807A! I do want to say to all that if there is a Samsung Experience Shop inside your Best Buy store they will update your device for free. It took them forever to find out where they had the images stored corporately but after several phone calls the proceeded to d/l & update my tablet. Took several hours but they did do it.
If I had seen your posts, I woud have done it myself. Much more fun to do!! Thanks again!

leswgnr said:
Just wanted to say thanks to you & @ashyx. Made a donation. Unfortunately, I didn't see either of your threads until today, as I had given up some time ago on anyone posting any workable images for the T807A! I do want to say to all that if there is a Samsung Experience Shop inside your Best Buy store they will update your device for free. It took them forever to find out where they had the images stored corporately but after several phone calls the proceeded to d/l & update my tablet. Took several hours but they did do it.
If I had seen your posts, I woud have done it myself. Much more fun to do!! Thanks again!
Click to expand...
Click to collapse
Many thanks. It's highly appreciated. Merry Xmas!

Excuse me for my ignorance but would this work with the SM-T800? And would I need to wipe everything? I would like to return to everything stock as if it were factory from an old version of IronRom I installed a while back.

Will I keep root?
If I flash this will I still be rooted? Thanks for this info. I was beginning to think I was stuck on kitkat forever.
P.S. I have no problem buying a few beers (or shots, hey its cold out man gotta warm up) for anyone helping me get an update on my device so that i can keep root.

Luigi_ said:
Excuse me for my ignorance but would this work with the SM-T800? And would I need to wipe everything? I would like to return to everything stock as if it were factory from an old version of IronRom I installed a while back.
Click to expand...
Click to collapse
No, this is for SM-T807A only.

Griefstruelove said:
If I flash this will I still be rooted?
Click to expand...
Click to collapse
Unfortunately this will remove root.

I would gladly make a donation but this is not working!

jb1974 said:
I would gladly make a donation but this is not working!
Click to expand...
Click to collapse
Explain 'not working'. Not enough info.

ashyx said:
Explain 'not working'. Not enough info.
Click to expand...
Click to collapse
This are the messages and a red FAIL!
<OSM> AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
---------- Post added at 10:33 PM ---------- Previous post was at 10:19 PM ----------
I see that the reactivation lock is ON.
is that related or the cause?

jb1974 said:
This are the messages and a red FAIL!
<OSM> AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
---------- Post added at 10:33 PM ---------- Previous post was at 10:19 PM ----------
I see that the reactivation lock is ON.
is that related or the cause?
Click to expand...
Click to collapse
Post a screen shot of the device screen.

SM-T807A MM Root?
AlexNI said:
Unfortunately this will remove root.
Click to expand...
Click to collapse
Is there a MM root yet for the SM-T807A?

Thanks! I needed to upgrade one of these. Sadly, it seems outdated firmware is the least of it's problems

Please Help!!! Trying to Flash T-Mobile Stock Firmware to My Verizon Note 8.

Hey Guys, I just recently upgraded my phone to the new Note 10+ coming from the Note 8. I still have my Note 8 and I'm trying to give it to my stepdad for Christmas. He is on T-Mobile and My phone is from Verizon. So I've been trying to Flash T-Mobile Stock Firmware to the phone so the phone has everything he needs to use it on the T-Mobile network, but I keep getting errors. I downloaded Odin 3.13.1, Downloaded the Samsung Drivers, and downloaded the latest T-Mobile Stock Firmware. I put my phone in download mode, Open Odin in Admin Mode, Plug my phone in, Odin says "Added" and the Device box turns Blue. I Add the BL File to the BL, AP to the AP, and the CP to the CP Line, Click Start, and every time it gets stuck on Initialzation.. for a bit, then gives me FAIL! (DeviceInfo). Tried like 5 different firmwares, they are all doing the same thing. Below I will post the Log from Odin and I will attach pictures of helpful information. My Note 8 is on the Most Current Verizon Firmware. Android 9.0 Pie. One of the Firmware Downloads I've Tried, is N950USQS6DSI3_N950UOYN6DSI3_TMB. Another is N950USQU7DSK3_CL17146873_QB27126819 Not sure if that's the right number set to post, because Frija named the folder something other than the Firmware number. I'm willing to donate $20 on Paypal to anyone that is able to help me successfully get the firmware flashed. Thanks for taking the time to help. I do have USB Debugging On and Uninstalled Smart Switch.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> apdp.mbn
<ID:0/007> msadp.mbn
<ID:0/007> persist.img.ext4
<ID:0/007> dqmdbg.img.ext4
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 4955 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007>
<ID:0/007>
<ID:0/007>
<ID:0/007> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)[/B]
[IMG]https://i.imgur.com/6ydmigW.jpg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Zalagar619 said:
Hey Guys, I just recently upgraded my phone to the new Note 10+ coming from the Note 8. I still have my Note 8 and I'm trying to give it to my stepdad for Christmas. He is on T-Mobile and My phone is from Verizon. So I've been trying to Flash T-Mobile Stock Firmware to the phone so the phone has everything he needs to use it on the T-Mobile network, but I keep getting errors. I downloaded Odin 3.13.1, Downloaded the Samsung Drivers, and downloaded the latest T-Mobile Stock Firmware. I put my phone in download mode, Open Odin in Admin Mode, Plug my phone in, Odin says "Added" and the Device box turns Blue. I Add the BL File to the BL, AP to the AP, and the CP to the CP Line, Click Start, and every time it gets stuck on Initialzation.. for a bit, then gives me FAIL! (DeviceInfo). Tried like 5 different firmwares, they are all doing the same thing. Below I will post the Log from Odin and I will attach pictures of helpful information. My Note 8 is on the Most Current Verizon Firmware. Android 9.0 Pie. One of the Firmware Downloads I've Tried, is N950USQS6DSI3_N950UOYN6DSI3_TMB. Another is N950USQU7DSK3_CL17146873_QB27126819 Not sure if that's the right number set to post, because Frija named the folder something other than the Firmware number. I'm willing to donate $20 on Paypal to anyone that is able to help me successfully get the firmware flashed. Thanks for taking the time to help. I do have USB Debugging On and Uninstalled Smart Switch.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> apdp.mbn
<ID:0/007> msadp.mbn
<ID:0/007> persist.img.ext4
<ID:0/007> dqmdbg.img.ext4
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 4955 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007>
<ID:0/007>
<ID:0/007>
<ID:0/007> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)[/B]
[IMG]https://i.imgur.com/6ydmigW.jpg
Click to expand...
Click to collapse
Weird.. The version 7 bootloader should have flashed. Are you sure you're not trying to flash the wrong firmware? Actually in all reality you don't need to flash anything just make sure your Google account is removed from the phone and then do a factory reset and when you add the t-mobile sim card it will automatically change everything including the boot up screen from Verizon to t-mobile. But if you want to try this one..
https://www.sammobile.com/samsung/galaxy-note-8/firmware/SM-N950U/TMB/download/N950USQS7DSK6/306369/
Also download Odin v3.13.3 not 3.13.1 it's on the same page as firmware in that link

MrMike2182 said:
Weird.. The version 7 bootloader should have flashed. Are you sure you're not trying to flash the wrong firmware? Actually in all reality you don't need to flash anything just make sure your Google account is removed from the phone and then do a factory reset and when you add the t-mobile sim card it will automatically change everything including the boot up screen from Verizon to t-mobile. But if you want to try this one..
Also download Odin v3.13.3 not 3.13.1 it's on the same page as firmware in that link
Click to expand...
Click to collapse
Will that method give him the T-Mobile apps though? I'd like it to be a stock experience for him.

Zalagar619 said:
Will that method give him the T-Mobile apps though? I'd like it to be a stock experience for him.
Click to expand...
Click to collapse
I'm not sure about that question as I've never done that before I just know it switches everything with the sim card but in any case try flashing the firmware you have downloaded using Odin version 3.13.3 instead of Odin 3.13.1.

MrMike2182 said:
I'm not sure about that question as I've never done that before I just know it switches everything with the sim card but in any case try flashing the firmware you have downloaded using Odin version 3.13.3 instead of Odin 3.13.1.
Click to expand...
Click to collapse
I downloaded Odin 3.13.3 and retried all the firmware I have downloaded and still getting the same message. I am currently downloading the Firmware you linked above, but I'm a basic user on SamMobile so my Download speed is capped at 15 kbps. So it'll take like up to 5 hours. I will definitely let you know how it goes, Thanks for the help.

Zalagar619 said:
Will that method give him the T-Mobile apps though? I'd like it to be a stock experience for him.
Click to expand...
Click to collapse
Sadly even after trying to use the Software from the link you sent me, I'm still getting stuck on Initialzation... Then <ID:0/005> FAIL! (DeviceInfo)

https://forum.xda-developers.com/showthread.php?t=4019939
Sent from my SAMSUNG-SM-J727AZ using XDA-Developers Legacy app

slapnitz12 said:
https://forum.xda-developers.com/showthread.php?t=4019939
Sent from my SAMSUNG-SM-J727AZ using XDA-Developers Legacy app
Click to expand...
Click to collapse
? That's just a link to this post?

Zalagar619 said:
? That's just a link to this post?
Click to expand...
Click to collapse
Try doing this.. Edit the “UMS/PATCH” of the config file in the Odin folder and edit from 0 to 1 and save it and then add the extracted firmware files for t-mobile in the Odin sections appropriately: BL for BL AP for AP CP for CP CSC for CSC (not HOME_CSC)UMS for USERDATA. Now tap start.
---------- Post added at 05:01 PM ---------- Previous post was at 04:46 PM ----------
Zalagar619 said:
? That's just a link to this post?
Click to expand...
Click to collapse
Also, if the last post doesn't help you then do this.
1 - Go into Download mode with the Power+Bixby+VDown
2 - Selected BL+AP+CP+CSC (pretty much replace all) in Odin
3 - hit start, press the Power+Bixby+VDown and continue to hold.
4 - phone might reboot then
5 - Comes back up in Download mode, let go and select download mode again.
6 - once in download, press down and hold the Power+Bixby+VDown and hit start on Odin again (yes ,same as above).
7 - it should start loading the image. Once it starts, let go of the buttons or the phone will reboot again and kill it.
Basically, it fails once then imaged on the second time it goes through. If you let it get to the samsung screen between download screens, you just have to start over.
You should start holding the buttons just right after you press START in Odin(you should be already in download mode of course), really you should start holding those buttons right in the next moment after you click START in Odin, so you must do it really fast. It should avoid that FAIL issue in Odin and proceed to further installation of the firmware. As soon as it finishes flashing BOOT, release those buttons(as I said BOOT is one of the first stages so you will have to release the buttons after a second or two), if you keep holding them it will fail again and it will also fail if you start holding them before you press START or if you start holding them too late. Yes, we are using this combination to go to the download mode but in this case it won't do that, it should allow you to avoid that FAIL at the start of flashing process.
If you can't get this to work then simply just flash ONLY the CSC and USERDATA files from the t-mobile folder and make sure you flash the SAME firmware version! By that I mean only from this version N950USQS6DSI3_N950UOYN6DSI3_TM do not flash the files from the newer versions against the older versions! If this works in Odin then do a factory reset in recovery after the Odin flash and see if you have t-mobile apps.

I got a sprint phone from my brother and I just put t-mobile sim in the phone and it flashed itself to tmobile rom. Now it is a tmobile branded phone. I was shocked when it rebooted. It took a while when the phone restarted though. Everything happened automatically, I didn't have to do anything. It was Sim unlocked though.
Sent from my SM-N950U using Tapatalk

Zalagar619 said:
? That's just a link to this post?
Click to expand...
Click to collapse
See what @SKORPiO1975 just said? I'm pretty sure if you just put the sim card from t-mobile in the phone it'll just change everything.

SKORPiO1975 said:
I got a sprint phone from my brother and I just put t-mobile sim in the phone and it flashed itself to tmobile rom. Now it is a tmobile branded phone. I was shocked when it rebooted. It took a while when the phone restarted though. Everything happened automatically, I didn't have to do anything. It was Sim unlocked though.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Did it install the T-Mobile apps though? My phone is also unlocked. I tested the phone with a T-Mobile sim card from my Mom's phone just to see if it got 4gLTE and it did, but I didn't let it restart because I was still using it at the time while I was waiting for my Note 10+ order to be ready.