Anyone know if any of these adapters work through the dock?
Was thinking of getting this as it does mention Android but that's not very specific or doesn't really mean much
http://www.monoprice.com/Product?c_id=103&cp_id=10314&cs_id=1031403&p_id=11195&seq=1&format=2
Sleeepy2 said:
Anyone know if any of these adapters work through the dock?
Was thinking of getting this as it does mention Android but that's not very specific or doesn't really mean much
http://www.monoprice.com/Product?c_id=103&cp_id=10314&cs_id=1031403&p_id=11195&seq=1&format=2
Click to expand...
Click to collapse
http://www.amazon.com/BobjGear-Ethernet-Ultrabooks-ChromeOS-Included/dp/B007RTACDM?tag=twnene-20
did some googling to see if it was possible, and this one will work. first review said you can use it through settings without an app. The one you posted should work the same way.
Thanks for the reply, that was my thought so I ordered it anyway.
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
In case anyone was wondering, this just got delivered.
I plugged it into the Dock and right away in the notification it says Ethernet port is detected. I plugged in a cable and it works right away.
Now I can get internet in our crappy other offices.
Very happy especially for $15.
Sleeepy2 said:
In case anyone was wondering, this just got delivered.
I plugged it into the Dock and right away in the notification it says Ethernet port is detected. I plugged in a cable and it works right away.
Click to expand...
Click to collapse
Is this the adapter from Monoprice, or the one from Amazon?
EDIT: Actually, I just noticed that the one on Amazon is 100M rather than 1G ethernet, so I assume you went with Monoprice.
elborak said:
Is this the adapter from Monoprice, or the one from Amazon?
Click to expand...
Click to collapse
Monoprice
Only $15
You need to stick to something with the AX88772 chipset. The AX88178 might work - mixed danswers around the web on that one. Definately don't get anything with the SMSC LAN7500 chipset either. Stay far away from the AX88179. I bought a StarTech with that chipset and it did not work in any Android device I have.
Finally I bought the one Asus makes one for $19.99 on Amazon - has the AX88772 and works just fine (the Asus connect dock for the TF201/300/700's has that chip in it too so I knew it would work - took mine apart to find out what was in it).
Sleeepy2 - Is that adapter USB 2.0 or USB 3.0 ?
The reason that I asked - on monoprice.com written USB 3.0 and the the color of socket - really blue.
But on ebay from the same seller USB 2.0. From Amazon - BobjGear-Ethernet - USB 2.0
Cadstar - Same things, I bought from Gigabit usb 3.0 - chipset AX88179 - working with Win 7..8 and linux , but not android and Asus tf701
Not really sure, any idea how I can check?
1. The type A connection (the "standard" USB connection that plugs into your computer), should be blue, like: media.bestofmicro.com/USB3-SuperSpeed-external-storage,4-B-252875-13.jpg
2. Speed. You really can feel it if you copy few giga via cable.
Well it is blue and it seems fast. The sticker on it also says USB 3 so I will go with yes it is
Thanks, I intend to buy.
Maybe someone will be useful.
My old Trendnet TU2-ET100 h/w: 3.0 (AX88772 chipset) works great in our device!
Speed Ethernet even slightly higher than over WiFi
Related
Can anyone recommend a decent USB OTG that hangs down the side of the nexus 10 rather than sticks out?
Preferably one they've proven to work with an N10.
I appear to have lost my Samsung one I was hoping to use.
Thank you.
Swype'd at pace from my Galaxy S2
I have this one
http://www.amazon.com/gp/product/B005GI2VMG/ref=oh_details_o01_s00_i00
Works perfectly with my thumb drives and external hdd. Not only does it work, but the price was unbeatable.
Don't buy one of those $10+ cables as it does the same exact thing as this one.
I might add, you could possibly look into getting one that can charge the device at the same time it's using an external storage device. Unless you're okay with it.
Stickmount works with root on my devices
Nexus Media Importer works without root on my devices
GNex and N10.
Hope this helps!
Confirmed that my OTG cable works.
sunoryjim said:
Confirmed that my OTG cable works.
Click to expand...
Click to collapse
Can you still get to the headphone jack with that cable?
Is there any long (length wise) USB OTG Cable?
So I can just keep the flash drive or external drive in my messenger bag and use my phone or tablet LOL.
Also will USB 3.0 work with the devices?
Lumsdoni said:
Can anyone recommend a decent USB OTG that hangs down the side of the nexus 10 rather than sticks out?
Preferably one they've proven to work with an N10.
I appear to have lost my Samsung one I was hoping to use.
Thank you.
Swype'd at pace from my Galaxy S2
Click to expand...
Click to collapse
I bought both of these. Both connect with the larger portion of the USB connector towards the screen so they hang down the side of the tablet:
SANOXY Micro USB Host Mode OTG Cable - The connector for this one was flipped from the picture and hangs down the side of my N10.
eForCity Micro USB OTG to USB 2.0 Adapter - This one came just like it was pictured.
Both came from Hong Kong which took about 2 weeks in the mail however they cost just around $1.00 each and with free shipping not much to lose.
I use mine with a elago Mobile Nano II USB 2.0 microSDHC Flash Memory Card Reader and a 32GB card (my 64GB is in my S3). With the adapter in the OTG cable it barely hangs out the bottom and makes it very compact.
I have 2 kinds of OTG cables here, both working perfectly fine with my Galaxy Nexus. However on Nexus 10 when I connect a USB device to the OTG (or connect the OTG cable with a USB device already plugged in) the tablet turns off completly and I have to remove the OTG to be able to start it again.
OK -- Sorry to resurrect a glue'd horse, but does anyone have a link for one that ALWAYS ships the correctly sized (read not too long) OTG adapter? I've already ordered two of the OTG adapters through Amazon but they BOTH have too long of a connector and it basically sits loose in any device. Very lame.
bschrib said:
OK -- Sorry to resurrect a glue'd horse, but does anyone have a link for one that ALWAYS ships the correctly sized (read not too long) OTG adapter? I've already ordered two of the OTG adapters through Amazon but they BOTH have too long of a connector and it basically sits loose in any device. Very lame.
Click to expand...
Click to collapse
I'm looking for one as well. The cheap ones from eBay are too long. They work but the connection is loose. Do NOT buy the ones linked below.
http://pages.ebay.com/link/?nav=item.view&id=300803544652
I bought THIS one from monoprice for $1.43 last week its on its way...ill report back when it arrives. Monoprice stuff is usually pretty good quality, hoping it is nice and secure
http://www.amazon.com/dp/B008CQKM2U/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Has anyone tried this? Says it will work with the Nexus 7 so I'm assuming the 10 as well? Would be nice to have all in one.
Sent from my Nexus 4 using Tapatalk 2
egrims said:
http://www.amazon.com/dp/B008CQKM2U/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Has anyone tried this? Says it will work with the Nexus 7 so I'm assuming the 10 as well? Would be nice to have all in one.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Just an FYI I e-mailed Juiced Systems to see if this would work with the Nexus 10. Their response is below:
The adapter should work with 4 out of the 5 functions for the Nexus 10(MHL maybe not). I have yet to test it out personally. This is something we will test soon and will post online. The nexus 10 does have an HDMI mini port built into it already. If MHL doesn't work that is because google did not think it was necessary to make it MHL capable when it has an HDMI mini port. The Nexus 7 is not MHL capable either, not sure why they chose to do that. I will keep you posted once the nexus 10 testing comes back.
Thank you
sunoryjim said:
Confirmed that my OTG cable works.
Click to expand...
Click to collapse
confirming this one works, and its a really great fit, nice and tight not like the loose too long one.thanks for the link.
productofusa said:
confirming this one works, and its a really great fit, nice and tight not like the loose too long one.thanks for the link.
Click to expand...
Click to collapse
Can you still access the headphone jack with this OTG cable?
Can anyone tell me how an OTG cable can be better than another except of the price/length/design ??
Isn't that micro USB to USB cable just a normal cable connecting 5 pins which are either in a bigger or a smaller plug?
Why should such a cable not work (except of the situation that the cable is damaged)?
xeTaiz said:
Can anyone tell me how an OTG cable can be better than another except of the price/length/design ??
Isn't that micro USB to USB cable just a normal cable connecting 5 pins which are either in a bigger or a smaller plug?
Why should such a cable not work (except of the situation that the cable is damaged)?
Click to expand...
Click to collapse
I watched a video on how to make your own, if it was correct, they stated that one pin was unused and when it is connected to chassis ground tells the device to go into OTG mode.
So this OTG cable is not just connecting each pin? It's not just an adapter?
Okay then, good to know, thank you
lexlucas said:
Can you still access the headphone jack with this OTG cable?
Click to expand...
Click to collapse
If you took a razor knife to the strain relief part it would work, as it is you can stress it out of the way enough to fit a headphone jack but it puts a bit too much pressure on the USB port for my liking try it they're cheap!
i see most are using ones with a cable, is there an issue with ones like these?
http://www.overstock.com/Electronic...l?recSet=4e4a53cb-bea5-4a2e-aec6-88ea05c24288
http://www.ebay.com/itm/90d-right-A...160919848094?ssPageName=ADME:B:EOIBSA:SG:3160
I got 2 of this, works pretty well and sits close to the side of the tablet.
Only 2 issues, the connector itself is long so it's a little loose and it will block the earphone jack.
sorry if this question has been asked already but i looked around and cant find a answer. other than building your own, where can i buy/order one in the US? I want to root my new chromecast but cant find one. a link would be greatly appreciated
dcmbullet said:
sorry if this question has been asked already but i looked around and cant find a answer. other than building your own, where can i buy/order one in the US? I want to root my new chromecast but cant find one. a link would be greatly appreciated
Click to expand...
Click to collapse
http://www.miniinthebox.com/usb-fem...msung-galaxy-s3-i9300-and-others_p504487.html here you go m8
bormeth said:
http://www.miniinthebox.com/usb-fem...msung-galaxy-s3-i9300-and-others_p504487.html here you go m8
Click to expand...
Click to collapse
are you sure this is the cable needed to root the chromecast? i appreciate the help
Here's another one that's 20c cheaper.
usb-female-to-micro-usb-male-micro-usb-female-otg-cable
Amazon, eBay or even mom-and-pops electronics store, if you can find one nearby, should have it. Or the guy with computers/electronics in the last row of your local flea market may have one....
Sent from my TF300T using Tapatalk 4
Correct me if I am wrong, but I thought I had read that if you have a simple powered usb hub, that will work also?
Sent from my SPH-L710 using Tapatalk 2
pdaddy said:
Correct me if I am wrong, but I thought I had read that if you have a simple powered usb hub, that will work also?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
i would also love to know if this is true because i can always find one of those
dcmbullet said:
i would also love to know if this is true because i can always find one of those
Click to expand...
Click to collapse
A powered USB hub should work Just test it out, the worst thing that could happen is that it will boot stock image, just pull the power to stop it.
Hey guys.
I'm in NYC for a few days and I'm looking for an OTG cable, powered or not. At best buy and at radioshack they look at me like I'm asking for the impossible. I'll be in towns until Tuesday, and I'd like to ask if anyone knows a store where I could buy this cable.
Thanks in advance.
Sent from my Nexus 4 using Tapatalk
loplo said:
Hey guys.
I'm in NYC for a few days and I'm looking for an OTG cable, powered or not. At best buy and at radioshack they look at me like I'm asking for the impossible. I'll be in towns until Tuesday, and I'd like to ask if anyone knows a store where I could buy this cable.
Click to expand...
Click to collapse
Sorry to say, I have yet to see a powered OTG cable in a retail store, even my geeky local "has a majority of stuff Monoprice carries" store does not have this particular type of cable.
If B&H Photo/Video has these in stock, it should work (but it'll cost more than getting the OTG cable on eBay)
Pioneer DJC-WeCAi 2.6' DJ Controller Cable - $29.00
Neutrik NAUSB-B USB Female Type-A to Type-B Converter - $5.21 (If you can find an equivalent that's not designed for panel mount, all the better)
Comprehensive On-The-Go USB A Female to Micro USB B Male Adapter Cable (4") - $2.99
-OR- NTW USB Type A Female To Micro USB Type B 5-pin On-the-Go (OTG) Pigtail Adapter - 4" - $5.99
-OR- StarTech Micro USB Male to USB OTG Host Adapter Female (5") - $5.99
$37.20 or $40.20 (if you go with a more-expensive OTG adapter) plus tax...
more expensive than the Chromecast itself but everyone has priorities.
Connections would be:
Pioneer cable RED A (flat) end --> Chromecast wall power adapter
Pioneer cable BLACK A (flat) end --> USB OTG adapter cable
Pioneer cable B (square) end --> USB A-B converter --> plug your USB Stick in here
USB OTG adapter cable --> Chromecast
You might find the right parts to get this cheaper, you just need to plan it out in your head. I was just sticking with stuff B&H has since they're in NYC.
Thanks,
I was planning a visit to B&H, but now it became mandatory.
I'll try the one from #3. I could wait until I get home, but can't leave NYC without rooting or bricking my Chromecast, in my hotel room.
Sent from my Nexus 4 using Tapatalk
loplo said:
Thanks,
I was planning a visit to B&H, but now it became mandatory.
I'll try the one from #3. I could wait until I get home, but can't leave NYC without rooting or bricking my Chromecast, in my hotel room.
Click to expand...
Click to collapse
Just so we're 100% clear, you'll need 3 total pieces to make it work - the Pioneer cable, the USB A female to B female adapter, and one of the OTG cables.
I also hope you've already checked your serial number against the rootable serial numbers and you know that the hotel's TV may not have HDMI enabled, and even if it does, its WiFi probably won't allow Chromecast to work.
If you brought your own wireless router, then you only have to deal with the TV though. Actually, if possible, I would take everything you need
with you to B&H. If you explain what you're trying to do, they might let you borrow an input on one of their TVs - then you won't have to worry about the hotel TV being locked, unless you already know it's not.
Good luck!
Just to add these cables are usefull for more than just hacking a Chromecast.
I use one to connect Hard Drives to my Xoom (Tablet) since my ROM supports OTG.
Sn are 3920 3921 3922, this shouldn't be a problem. Ref cables I'll take a look at the links later at the hotel. Thanks for your input.
Sent from my Nexus 4 using Tapatalk
Found this on amazon for the Vivo tab, which uses the same 36-pin connector as the TF701. So I bought it for $20US hoping it would work with the 701 and it does! Plugged in the OTG adapter and attached my sandisk extreme usb 3 thumbdrive. Used the included SD/uSD card adapter to connect a couple SD cards and had no problems. Didn't do any speed tests or anything, just wanted to make sure they worked, and they did.
ASUS Extension Kit for VivoTab-Series Tablets
Aaroneious said:
Found this on amazon for the Vivo tab, which uses the same 36-pin connector as the TF701. So I bought it for $20US hoping it would work with the 701 and it does! Plugged in the OTG adapter and attached my sandisk extreme usb 3 thumbdrive. Used the included SD/uSD card adapter to connect a couple SD cards and had no problems. Didn't do any speed tests or anything, just wanted to make sure they worked, and they did.
ASUS Extension Kit for VivoTab-Series Tablets
Click to expand...
Click to collapse
Wow... Great find!
Hey - happen to have a PS3 controller you could test with? Almost bought the dock purely for this purpose, so I'm dying to know if plugging a controller in through USB would work...
If this really is fully supported by the tf701t, I'm seriously questioning why they didn't say so?
Sent from my K00C using Tapatalk
Trevor_g said:
Wow... Great find!
Hey - happen to have a PS3 controller you could test with? Almost bought the dock purely for this purpose, so I'm dying to know if plugging a controller in through USB would work...
If this really is fully supported by the tf701t, I'm seriously questioning why they didn't say so?
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Sorry, no, I don't have a PS3 controller.
Aaroneious said:
Sorry, no, I don't have a PS3 controller.
Click to expand...
Click to collapse
No problem. There is another way to find out. Do you have a USB mouse and/or keyboard handy? If you wouldn't mind testing these basic peripherals, we could really verify if this thing provides host mode for more than disk drives.
If so, I'm buying!
Sent from my K00C using Tapatalk
Trevor_g said:
No problem. There is another way to find out. Do you have a USB mouse and/or keyboard handy? If you wouldn't mind testing these basic peripherals, we could really verify if this thing provides host mode for more than disk drives.
If so, I'm buying!
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Standard mouse and keyboard both work fine when plugged into the OTG adapter.
Shocking. Why in the world would Asus not bother marketing this toward the TF community too?!
Glad you found this. Thanks for sharing and testing... Off to buy!
Sent from my K00C using Tapatalk
In 4 one. 9 left in stock. Now all I need is an extra usb cable. Can anyone point me to one?
Sent from my SCH-I545 using Tapatalk
guho said:
In 4 one. 9 left in stock. Now all I need is an extra usb cable. Can anyone point me to one?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Yeah I just want the extra cable - assume any vivo tab one works?
OTG USB adapter
I have ordered one too. Thanks for the link. :cyclops:
OTG USB Adapter
That's good idea, but unfortunately I can't buy this thing. There are blutooth usb-hub, for example _ttp://usb.brando.com/prod_detail.php?prod_id=00142
Will it work?
can someone find me the right product on the german amazon site? or uk?
i cant find
Can you charge and use USB with this?
Nice
Finaly, i recieved my OTG USB adapter today, and it works perfectly.
Thanks for the link.
or you can just buy the one meant for the transformer and it's a few dollars cheaper if you can't get the other one. Just doesn't come with the SD card adapter. This is the one that I intend to buy once I get my tablet
evodev said:
or you can just buy the one meant for the transformer and it's a few dollars cheaper if you can't get the other one. Just doesn't come with the SD card adapter. This is the one that I intend to buy once I get my tablet
Click to expand...
Click to collapse
Warning: This will not work with our TF701!!!!!! Read the Q&A below the product description !!
should the one for the tf700t also work?
The adapters mentioned that work with the 701 are all usb-2.
Does anyone know of a usb-3 adapter that will work?
matthelm said:
Can you charge and use USB with this?
Click to expand...
Click to collapse
I'm considering getting a TF701T, does anyone know if you could use this to charge the device? It'd be nice to know I have a backup if the proprietary USB cable fails.
nop- said:
I'm considering getting a TF701T, does anyone know if you could use this to charge the device? It'd be nice to know I have a backup if the proprietary USB cable fails.
Click to expand...
Click to collapse
Also can you simultaneously power the device and provide input using a usb hub(plug in keyboard and mouse for example)?
I went to the computer store. Bought the following:
The adapter which is 2.0 by the way.
USB 3.0 HUB with Power Adaper.
A male to A male cable.
While connected to a the HUB, and while the device is on its says "NOT CHARGING". I turn it off(tablet), Not getting a charge while connected to a the hub. It also drained it while the tablet is off. Nevermind the hub for power.
NO CHARGE FROM HUB
While connected to the PC it drained the power down to 6% then went back up to 50%. Not sure about that because it seemed to charge while it was off.
NO CHARGE FROM PC
As for the power adapter that comes with the tablet to it. Not charging while ON. Turn it off and no charge.
NO CHARGE FROM ASUS POWER ADAPTER
SO no it doesnt charge in any practical sense from this VIVO adapter as far as i can tell. Maybe its the MALE to MALE cable. I dont know. But its not worth trying if there a chance of drain killing it.
Unfortunately from the adapter there is no media connection or usb debugging to pc or usb hub afiak.
NO MEDIA CONNECTION OR USB DEBUGGING
The good news is that the device can connect to the USB HUB and the keyboard , mouse and thumb drive work flawlessly together.
I have been scouring the web & even overseas manufacturers looking for anyone that can provide a MHL 3.0 Adapter. Has anyone seen one on the market yet? Some of the overseas sites are poorly worded, MHL 3.0 USB, but upon further investigation, all have been MHL 2.0 with support for USB 3.0.
If anyone has a source for these, in either single unit or batch lots for resale, please let me know.
GSLEON3 said:
I have been scouring the web & even overseas manufacturers looking for anyone that can provide a MHL 3.0 Adapter. Has anyone seen one on the market yet? Some of the overseas sites are poorly worded, MHL 3.0 USB, but upon further investigation, all have been MHL 2.0 with support for USB 3.0.
If anyone has a source for these, in either single unit or batch lots for resale, please let me know.
Click to expand...
Click to collapse
http://www.ebay.com/itm/MHL-3-0-Mic...Phone_PDA_Cables_Adapters&hash=item27df8f9066
Only 3.0 is compatible with m8?
I have this one from monoprice, just have to find it and see if it will work with my M8.
http://www.monoprice.com/Product?c_...83314&p_id=8675&seq=1&format=2#specifications
Vesponew said:
Only 3.0 is compatible with m8?
Click to expand...
Click to collapse
NO> Any that aupprts the 5-pin should work fine. It is just that 2.0 & 3.0 don't need external power, if supported by the device, & 3.0 has greater speed & bandwidth capabilities. 4K video & 7.1 surround sound (L-PCM) support.
scooterman said:
http://www.ebay.com/itm/MHL-3-0-Mic...Phone_PDA_Cables_Adapters&hash=item27df8f9066
Click to expand...
Click to collapse
Except that one states in big red letter that external power is REQUIRED. WHich would make it MHL 1.0. It also states 1080p, again MHL 3.0 supports 4k video. Most of the MHL 2.0 devices also support at least USB 3.0, that one supports USB 2.0, which again supports it being an MHL 1.0 device.
That's the thing, I have found a few that claim to be MHL 3, but none of them seem to pan out to actually be MHL 3.0. Most of the time when you contact to call them on it, or inquire, you get zero response. Ebay is pretty notorious for knock offs too, like the 128Gb & even 64Gb UH1 Micro SD cards.
So there is no mhl 3.0 5pin out there adapter yet.
Which 2.0 5 pin adapter should I be
buying for the HTC One m8?
Badelhas said:
So there is no mhl 3.0 5pin out there adapter yet.
Which 2.0 5 pin adapter should I be
buying for the HTC One m8?
Click to expand...
Click to collapse
Good question. I am researching that now. I find it hard to believe that a year old standard still isn't supported by accessory manufacturers, even though it is by the device manufacturers.
I'll let you know what ones I try & how it goes.
GSLEON3 said:
Good question. I am researching that now. I find it hard to believe that a year old standard still isn't supported by accessory manufacturers, even though it is by the device manufacturers.
I'll let you know what ones I try & how it goes.
Click to expand...
Click to collapse
Nice, thanks m8
MoNsTeReNeRgY22 said:
I have this one from monoprice, just have to find it and see if it will work with my M8.
http://www.monoprice.com/Product?c_...83314&p_id=8675&seq=1&format=2#specifications
Click to expand...
Click to collapse
That's the same exact one I bought for my LG G2. I assumed the G2 supported MHL, but in fact it supported DisplayPort, so I had this laying around for a while, and it works just fine for the M8.
GSLEON3 said:
Good question. I am researching that now. I find it hard to believe that a year old standard still isn't supported by accessory manufacturers, even though it is by the device manufacturers.
I'll let you know what ones I try & how it goes.
Click to expand...
Click to collapse
It might be a year old standard, but devices/phones supporting it are only just now being released. So, accessory manufacturers have had no reason to manufacture any adapters until now. Hopefully it won't be too long until we start seeing some now that there are some devices that can take advantage of it.
Anyone found a working MHL adapter that sells to Europe? Monoprice dosent and I bought one from eBay and it dosent work
Hey Guys!
1 st post here !
Would this work ?
The Rocketfish RF-G1171
I m a newbie I can t post links lol
Badelhas said:
Anyone found a working MHL adapter that sells to Europe? Monoprice dosent and I bought one from eBay and it dosent work
Click to expand...
Click to collapse
http://www.ebay.co.uk/itm/1080P-Mic..._MobilePhoneDataCables_JN&hash=item27e2c0cb36
Thanks. That's the one I tried and didn't work but maybe it was defective. Did anyone bought that one also? Does it work on the HTC One m8?
For what its worth the one I bought I have to plug things in in a specific order or it won't work. I believe it is power, then HDMI, then MHL into M8. I have to do this each time, if I unplug it from the phone and just plug it back in it won't work until I unplug everything and reconnect in that order.
Nice, thanks for the tip
zenisnotchosen said:
For what its worth the one I bought I have to plug things in in a specific order or it won't work. I believe it is power, then HDMI, then MHL into M8. I have to do this each time, if I unplug it from the phone and just plug it back in it won't work until I unplug everything and reconnect in that order.
Click to expand...
Click to collapse
I finally received a different MHL adapter I bought but it still dosent work. I did what you said, first power, then HDMI and then MHL to the phone. The symbol of MHL beeing connected appears but there is onde more no image on the TV. I even tried connecting first power, then MHL and then HDMI but it´s the same thing. Can someone give me some tips, please? I am getting desperate
Did you ever get this figured out? I just used mhl for the first time on my m8. I used the same cable I did for my m7. It's a
Skiva 6.5 feet MHL (Micro USB) to male HDMI cable. I had trouble at first but here's how I got it to work flawlessly: first I plugged everything in, no particular order... Next I plugged in the micro usb part to my m8 while the tv input was still on my normal everyday input... I waited until my red charging light turned on my m8 then I switched to the correct tv input. My m8 went into mhl mode and I streamed a movie perfectly.
I tried switching the tv input first then plugging in my phone and it wouldn't work. But, when I left it on my normal input, then plugged my phone in and saw it was charging, then changed inputs.... Success!
Thanks, I will try if that works. But I've got little hopes, to be honest
Just got my new S5 (yay!) and see that it comes with a new data cable configuration. I can't find anything that tells what the point of it is. Google was a bust too... Anyone know what the extra pins are used for? I looked at Samsung for accessories and even the HDMI adapter is standard micro usb and does not use the extra pins...
scottmcm said:
Just got my new S5 (yay!) and see that it comes with a new data cable configuration. I can't find anything that tells what the point of it is. Google was a bust too... Anyone know what the extra pins are used for? I looked at Samsung for accessories and even the HDMI adapter is standard micro usb and does not use the extra pins...
Click to expand...
Click to collapse
It's used for USB 3.0
scottmcm said:
Just got my new S5 (yay!) and see that it comes with a new data cable configuration. I can't find anything that tells what the point of it is. Google was a bust too... Anyone know what the extra pins are used for? I looked at Samsung for accessories and even the HDMI adapter is standard micro usb and does not use the extra pins...
Click to expand...
Click to collapse
This is USB 3.0 which is a faster rate of data transfer from devices like computers to your phone. But USB 3.1 is right around the corner and that is a reversible plug. S5 is becoming old news fast
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app