After Reboot in recovery mode through cwm,then after wipe cache partition and then wipe data/factory reset .when i apply upate from sd card and select z2 experia zip file .....after then a msg show installation aborted ....now what to do........ and why not showing advance option in recovery mode in my phone
prashantkumar0071 said:
After Reboot in recovery mode through cwm,then after wipe cache partition and then wipe data/factory reset .when i apply upate from sd card and select z2 experia zip file .....after then a msg show installation aborted ....now what to do........ and why not showing advance option in recovery mode in my phone
Click to expand...
Click to collapse
Probably the rom file was not downloaded correctly.
Do the download again of the rom and the latest version of CWM HERE
To install CWM image, use the Mobileuncle MTK Tools
Same problem for me in my a250
When i go in cmw and wipe data/factory reset and dalvik cache and install pureview then install completes and as per instructions i again wipe cache and dalvik cache. And when i reboot my phone then my phone stucks and dosenot start.
Plz tell what to do??
Sent from my A250 using XDA Free mobile app
ashishcvhatkar222655 said:
Same problem for me in my a250
When i go in cmw and wipe data/factory reset and dalvik cache and install pureview then install completes and as per instructions i again wipe cache and dalvik cache. And when i reboot my phone then my phone stucks and dosenot start.
Plz tell what to do??
Sent from my A250 using XDA Free mobile app
Click to expand...
Click to collapse
Did you wiped the "System"
When to wipe system before or after flashing rom.
Sent from my A250 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 04:39 PM ----------
1rst wiped data and then cache and dalvik cache and then system and install rom and again wiped cache and dalvik cache. And reboot phone from cmw and waited 10 min but rom is stucked at xpera z2 pureview startup.
Plz tell what to do?
Sent from my A250 using XDA Free mobile app
ashishcvhatkar222655 said:
When to wipe system before or after flashing rom.
Sent from my A250 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 04:39 PM ----------
1rst wiped data and then cache and dalvik cache and then system and install rom and again wiped cache and dalvik cache. And reboot phone from cmw and waited 10 min but rom is stucked at xpera z2 pureview startup.
Plz tell what to do?
Sent from my A250 using XDA Free mobile app
Click to expand...
Click to collapse
wait more
Wait more than 10 minutes
Sent from my A250 using XDA Free mobile app
ashishcvhatkar222655 said:
When to wipe system before or after flashing rom.
Sent from my A250 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 04:39 PM ----------
1rst wiped data and then cache and dalvik cache and then system and install rom and again wiped cache and dalvik cache. And reboot phone from cmw and waited 10 min but rom is stucked at xpera z2 pureview startup.
Plz tell what to do?
Sent from my A250 using XDA Free mobile app
Click to expand...
Click to collapse
Wipe cache, data, system before installation.
try this:after installation do not wipe anything. just reboot.
Tried the procedure u told but not working still stucked at startup
Sent from my A250 using XDA Free mobile app
You are obviously doing something wrong.
1. Download Pure Xperia Z2 AGAIN and be sure that the download completes.
2. Install CWM or TWRP
3a. Wipe Cache, Wipe Dalvik Cache , Data/Factory Reset, System, Android Secure (FOR TWRP)
3b.Wipe Cache, Wipe Dalvik Cache, Data/Factory Reset (FOR CWM)
4. Flash the ROM and READ EVERYTHING carefully and follow Instructions.
5. If you READ THE INSTRUCTIONS they say to Wipe Cache and Dalvik Cache after instalation completes
5. WAIT the time it takes for the 1st boot
6. Back here if it takes more than 1 hour unsuccessfully
FSadino said:
You are obviously doing something wrong.
1. Download Pure Xperia Z2 AGAIN and be sure that the download completes.
2. Install CWM or TWRP
3a. Wipe Cache, Wipe Dalvik Cache , Data/Factory Reset, System, Android Secure (FOR TWRP)
3b.Wipe Cache, Wipe Dalvik Cache, Data/Factory Reset (FOR CWM)
4. Flash the ROM and READ EVERYTHING carefully and follow Instructions.
5. If you READ THE INSTRUCTIONS they say to Wipe Cache and Dalvik Cache after instalation completes
5. WAIT the time it takes for the 1st boot
6. Back here if it takes more than 1 hour unsuccessfully
Click to expand...
Click to collapse
+1
K i will do and reply you but you too reply fast. And thankyou
Sent from my A250 using XDA Free mobile app
---------- Post added at 06:42 PM ---------- Previous post was at 06:14 PM ----------
I have already installed cmw is there any need to install it again
Sent from my A250 using XDA Free mobile app
ashishcvhatkar222655 said:
I have already installed cmw is there any need to install it again
Sent from my A250 using XDA Free mobile app
Click to expand...
Click to collapse
no
My xperia rom zip shows 494 mb is there any need to download it again
Sent from my A250 using XDA Free mobile app
ashishcvhatkar222655 said:
My xperia rom zip shows 494 mb is there any need to download it again
Sent from my A250 using XDA Free mobile app
Click to expand...
Click to collapse
Just do everything I said
Okay i will do. And thanks.
Sent from my A250 using XDA Free mobile app
Thanks bro i have flashed rom sucessfully Thank you very much
Sent from my C2305 using XDA Free mobile app
d
Nice ! Probleme resolved
Related
I'm on 0.6 with bricked kernel. How do I upgrade? Full wipe or just cache and dalvik cache? Assuming bricked kernel will still work...can't see why not
Sent from my R800i using XDA App
Nhialor said:
I'm on 0.6 with bricked kernel. How do I upgrade? Full wipe or just cache and dalvik cache? Assuming bricked kernel will still work...can't see why not
Sent from my R800i using XDA App
Click to expand...
Click to collapse
I wipe/delete factory reset and wipe dalvik cache. Flash the zip, then restore data using cwm. It works for me.
I just did wipe cache & dalvik cache, installed the zip and it went OK.
I took a nandroid backup first, just in case, but it seems to be fine.
chicle_11 said:
I wipe/delete factory reset and wipe dalvik cache. Flash the zip, then restore data using cwm. It works for me.
Click to expand...
Click to collapse
hwo do u restore data using CWM?
viny2cool said:
hwo do u restore data using CWM?
Click to expand...
Click to collapse
In cwm, choose advanced restore (in restore and backup), then choose restore data.
Since I can't post in dev forum:
So far I've seen Cyanogenmod9 screenshots on Touchpad only in landscape. Is it possible to use ICS on touchpad in portrait mode? Could somebody with alpha1/2 post a screenshot?
sombrerro said:
Since I can't post in dev forum:
So far I've seen Cyanogenmod9 screenshots on Touchpad only in landscape. Is it possible to use ICS on touchpad in portrait mode? Could somebody with alpha1/2 post a screenshot?
Click to expand...
Click to collapse
no screenshot, but i can confirm its works perfectly fine
PA v0.4 ws having probs .....superuser nd some apps force closing
went into recovery .....flashed v02. wiped cache partion/dalvic cahe
went reboot system now
stuck at boot screen
plz can ny1 help
i do hv a previous nandroid backup
do i restore backup or flash GB
i am able to boot into recovery
My advice is flash abyys 4.2 kernel
Reboot in to recovery (under advanced)
Full wipe
Wipe cache
Wipe dalvik
Flash v0.4
Sent from my GT-N7000 using xda premium
can i get a link plz ((
im so tensed (
thr is some red pill touch , cw versions....i dunno (
Here u have the abyys
http://forum.xda-developers.com/showthread.php?t=1362424
Sent from my GT-N7000 using xda premium
hey i restored one backup i had made..........my fone now started......but bcz of mount point problems i think as per ur advice i vl flash abyss
to flash abyss i dont need to downgrade to gb right?
Sir u have to be on gb rom or kernel to make a full wipe... after flashing abyys dont restart choose reboot in to recovery under advanced that is a touch screen recovery then make full wipe and reflash v0.4
Sent from my GT-N7000 using xda premium
flash abyss----> reboot in recovery------>full wipe (wipe cache partition/dalvic cache/wipe data factory reset)----> then flash v0.4
all three wipes required ryt?
İ always do it as three...
Sent from my GT-N7000 using xda premium
im using owains kang ics cm9 based but when i start my phone it says system ui stopped but i didnt change anything how can i fixe that
also i cant find my notifcations bar how can i get i back
i would like all help
Well first boot into recovery and wipe data and cache. Also wipe dalvik cache. Reboot and see if it's ok. Then report here for further help if needed.
heavencanwait said:
Well first boot into recovery and wipe data and cache. Also wipe dalvik cache. Reboot and see if it's ok. Then report here for further help if needed.
Click to expand...
Click to collapse
thanks im gonna try that
i report later
heavencanwait said:
Well first boot into recovery and wipe data and cache. Also wipe dalvik cache. Reboot and see if it's ok. Then report here for further help if needed.
Click to expand...
Click to collapse
I wiped cache , data and also dalvic cache but it still gives system ui has stopped
What to do
Re download the rom u may have a bad download .. then wipe and install from scratch .. also be wary of titanium back up.. if u xo use it only restore is user apps no system apps or data
Sent from my Optimus 2X using xda app-developers app
Thanks im gonnna try it where can i find it again that its good
Sent from my Optimus 2X using xda app-developers app
What can I do to fix this, Ive tried searching but nothing useful will come up!
Thanks in advance
Please give us more details like on what rom are you and what gb rom are you trying to flash. Thanks
Sent from my GT-S5830 using xda premium
Go to recovery menu -> wipe cache -> wipe data/factory reset -> restart phone
Hit Thanks if this helped you :laugh::good:
More details about roms plz
Sent from my GT-S5830 using xda app-developers app
Just make a full wipe
Sent from my GT-N7000 using xda app-developers app
Give me the situation. Is the Bootloader opening or the recovery opening? If yes, good news, PM me. You can get a twinkie for yourself and recover from bootloops.
If none of the above works then try the PC Odin Method.
Link is here for extra read.
IF CWM Works:
1. Download any ROM which is safe as of now. (Eg. AceDroid )
2. Go to Recovery (that blue droid screen )
3. Wipe Data/Fac Reset
4. Wipe Cache
5. Wipe Dalvik Cache.
6. Flash the Ultimate Kernel Cleaning Script. Find it here. Read well before performing this.
7. Flash the ROM.
8. Reboot.
9. If FCs Occur go for Wipe Cache.
The full wipe did the job. Thanks guys
Hy recently ask paul thatrom bricks my phone so he said write in q&a so here it is i rebooted to recovery in stock 2.3.4 uae version rooted and then i factory restored and wiped dalvik cache and installed the rom but couldnt start the device, on bootanimation it stuck after 30 min i removed the battery and flashed the stock rom back and again installed debrand rom this time factory restored before and after the installation of rom but didnt work still got a bootloop plz tell me what to do
Sent from my LG-P970 using xda app-developers app
adil30591 said:
Hy recently ask paul thatrom bricks my phone so he said write in q&a so here it is i rebooted to recovery in stock 2.3.4 uae version rooted and then i factory restored and wiped dalvik cache and installed the rom but couldnt start the device, on bootanimation it stuck after 30 min i removed the battery and flashed the stock rom back and again installed debrand rom this time factory restored before and after the installation of rom but didnt work still got a bootloop plz tell me what to do
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Wipe data/factory reset + Wipe Cache partition + Wipe dalvik Cache
Sent from my LG-P970 using Tapatalk 2
SoulExertz said:
Wipe data/factory reset + Wipe Cache partition + Wipe dalvik Cache
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
did this again and again but didnt work
adil30591 said:
did this again and again but didnt work
Click to expand...
Click to collapse
Me 2 facin d same prblm .... wait in for somebody to post solution
Sent from my LG-P970 using xda premium
Are you guys sure, that you are having a P970? Not any other version of Optimus Black or Bright? Just wipe Data, Cache and Dalvik before the installation. Wait for the installation to finish, hit reboot phone and it should work properly. I cant explain it to myself otherwise...
Yes i got p970 2.3.4
Sent from my LG-P970 using xda app-developers app