Related
No firmware and USB problem
I have a large problem, my wifes galaxy s won't go by the first screen (says GALAXY S GT-I9000)
So i thought i'd fix it using odin using the 3 button combo. But that isn't working anymore.
Luckily i have a usb jig which gets me to the download mode ...... but !
When i connect the pc cable (tried 2 OE samsung ones) i get device not recognized so i can't use odin to fix it.
What can i do, or do i have to send it to a repair centre to be resurrected ?
I have searched and searched but not found any topics with the same issues i have on her phone.
Need a bit more info i.e were you flashing the phone??if so which rom?
Then phone was playing up so i flashed darkys 10.4.2.
However the usb connection wouldn't work so i flashed it to standard JVT
using mobile odin.
Then i rooted it and went to go into recovery mode and it wouldn't turn on.
I tried to help the gentleman , but no luck . From what he told me , phone turns on after battery insertion , and It is not recognised by usb => so odin not usable .
If you can get to download mode but the phone isn't recognized by your computer then i'd say it's a driver issue. Install your phone's drivers again. To do that, just installing kies is enough BUT be sure to open task manager in windows and kill any process that has kies in it's name before opening odin.
If that still isn't flying i'd try using different USB ports and even with a different computer.
Extra advice:
- try not to flash bootloaders for now. That means picking a rom that has no bootloaders included but matches your phone's current bootloader. If you were using gingerbread flash a gingerbread rom, if you were using froyo, flash a froyo rom.
phone not starting up past first screen (GALAXY S GT-I9000 in white on black screen), phone not recognized neither by pc nor laptop ( usb drivers installed ) , phone turns on after battery insertion without pressing anything.
This manual is from a German board
Take the battery out, then hold the 3 keys combo for download and put the battery back on. Now you should start the download mode.
If not, then try it with a jig.
Good luck!
GOT A JIG. WORKS FINE.
But pc wont recognize it !!
Have you double checked that you have the right drivers installed? I know you have to use the Nexus S drivers for CM9, not sure about Darky's ROM.
Drivers
Download drivers 64 bit | 32 bit from here and install.
It is NOT the drivers as my other galaxy s connects fine every time.
Drivers have been removed and installed repeatedly.
I would suggest a different computer, maybe a different cable. I have this same issue with my infuse, hope you get this resolved.
Sent from my Desire HD using XDA App
Already tried that as well
You could try Adam outler's unbrickable mod.
Pasted from other thread:
I just wrote a wall of text b4 and my browser crashed GG
Well, here we go again, i will only tell what I did/the process
I did a nandroidbackup, then i wiped all data (data+cache+dalvik), installed CyanogenMod 9 (Build 16), it rebooted automaticly, so I entered recovery again, installed Google Apps from there, wiped data and cache (no dalvik), rebooted.
Ended up looping at the Samsung screen (not animation), and I couldnt do the 3-button-combo, so the NANDroid backup is useless.
I can enter the download thing, but i dont even know what it does.
Tried plugging it in the charger (after letting it dry out during the night), and only the loop thing appears. Cant do anything.
I see that theres something called odin (Since my download thing is working (VolDown+Home+Power) if its that you mean.
If its possible to fix my phones state, please tell me how, since I startedrooting, flashing and stuff yesterday (Gotta start at some point) and followed HDTechVideos tut (On his website)
woolf clubs said:
You could try Adam outler's unbrickable mod.
Click to expand...
Click to collapse
I have nowhere near enough ability for that. Pity though.
Your problem is most likely the USB port. Maybe cleaning it might help. It happened to me for a few months then when I got the S2 I stopped using it. Began to use it as my home 3g wifi modem and kept it on charge the whole time. A few weeks later tried connecting it to the computer and it worked first go. Ever since it has worked perferctly. I suspect the problem possibly started by a rain drop getting into the port.
Mind you, even when it wasn't being recognised by the PC, I would constantly connect, remove, reconnect, reboot PC and phone etc and it would sometimes get recognised. Other times it wouldn't connect but Odin still recognised it.
Sounds silly but try leaving it on charge as I did and maybe, just maybe you'll be lucky like I was.
Sent from my GT-I9100T
Well as of today it is away to the O2 repair centre.
Its under warranty (unless the find out it was rooted etc) so fingers crossed.
Well had a text back today to say my phone has been despatched, so here is hoping that its fixed.
It came back from the repair centre yesterday with a note saying a part had been replaced,
no costs for me, yippeeeeeeee.
Hello everybody!
I've tried to find a solution, but without success.
Today I tried to install CWM on a french Galaxy S.
I've rooted the phone with z4root and after I started on download mod with adb.
Then with Odin3 I installed this file "Root-XX_OXA_JVK-v2.7-CWM3RFS.tar".
After that the phone rebooted automatically, unfortunately it's rebooting eachtime on the galaxy s logo.
The problem are that I can't boot on download mod or on CWM.
When the phone is off and I plug it on charger, it doesn't charge!
I think my phone is bricked.
Do you think you can help me or it's dead?
Is there a hard reboot procedure or something like that?
Thanks
I have exactly the same problem!
Are you sure you can't enter recovery? Volume up+home+power.
Sent from my GT-I9001 using xda premium
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Keep Trying
I know this is weird but keep hard resetting it. Try like 20 more times before you give up. Worked for me in the past I know it is weird. I had just flashed a new factory ROM.
I swear i have tried to enter the Recovery 20-30 times!!
It's fine
Hello,
I've bought an USB JIG for my SGS GT i9100 and I've been able to install ICS SLIM using Odin v3 1.7.
Very easy...
I advise this solution..
Thanks for your help.
Italia99 said:
I swear i have tried to enter the Recovery 20-30 times!!
Click to expand...
Click to collapse
did u try vol down + home + power button to go to download mode? if it can do that, the problem is just find some driver to make odin recognize your phone. search for "usb driver for samsung galaxy s" in google
then you can bring back your phone to live by downloading any rom you want and flash it via odin
ps. but if you cannot go to download mode, JIG USB with 301 K ohm will help you look at http://www.youtube.com/watch?v=Rdn5GoRjhn0
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Tical84 said:
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Click to expand...
Click to collapse
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
USB Connection
Italia99 said:
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Click to expand...
Click to collapse
Did you checked usb drivers, if not try to connect another samsung android device to your pc first. if another phone connected properly then problem in your phone only.
i suggest check this thread, if you think you completely lost your device - http://forum.xda-developers.com/showthread.php?t=819551
coepeq said:
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
Click to expand...
Click to collapse
Sorry, I should have been more specific. When I reinstalled the drivers I had actually uninstalled KIES and installed just the drivers.
I do have an update though but still can't get it to boot completely. Late last night I decided to try to get download mode to work one last time before passing out and pressing Vol-, Home and Power actually brought me to the recovery screen for the first time in my phone's life! "F YA!" was the only thing I could think at the time so I first went through and formatted/wiped every option I could find then installed the CM9 that I knew worked and now I get to the alien with the matrix-esque background and it stops there. I plugged it in and left it on that screen all night and that guy was still staring at me this morning. I tried download mode again but my computer still doesn't recognize it.
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
unotresocho said:
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
Click to expand...
Click to collapse
Press recovery combos when your turning off, see if that works, you might just be holding power too long and it turns on again
No usb at all? If you can connect with adb, you can reboot to recovery that way.
Combo.
unotresocho said:
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
Click to expand...
Click to collapse
Use key combos mate... and after the phone vibrates, release only power button for avoiding the autorestart :fingers-crossed:
Hi, thanks all for your advices. I try em all but with no sucess. Though, something weird happened today. After the battery completely drained I tried charging it with the my regular charger, the cable to the wall one, and the phone vibrated, like it recognized it, but didn't turn on. Just vibrated. So I tried again using my micro USB to PC cable and the phone vibrated again when I plugged in to the USB port, but didn't turn on either, nor the PC recognized the device. Don't know if this is good or bad :S
If you have any more ideas, please let me know.
Thanks!
Unotresocho.
AlexGardunio said:
Use key combos mate... and after the phone vibrates, release only power button for avoiding the autorestart :fingers-crossed:
Click to expand...
Click to collapse
I'm trying this, but it keeps auto restarting. I'll describe what I'm doing, maybe there's something wrong:
1. Insert the battery.
2. Phone vibrates, I press Vol-/Home/Power and Samsung Galaxy S3 mini shows.
3. Keep pressing the combo and the phone turns off
4. Release the power button
5. Phone vibrates and again shows the Samsung logo and then the CM boot animation
Turn off again and same.
Thanks for the advice!
Hi again, I managed to get to "Odin Mode", the recovery that comes by default with the phone. Don't know why if I had TWRP installed. Does anyone know if it's gonna help me in some way? Remember I can't use a cable
Thanks!
How did you get into "Odin Mode"? Are you sure the cable is not working when the phone is in download mode?
Got into it by doing the button combo, tried several times and it was tricky but finally got it. And yeah I quickly connected to the computer (I have a Macbook but I also try on a PC) neither of them recognized it. Don't know what else to do
Try wireless adb.
When connected to computer:
Code:
adb shell
su
reboot recovery
As far as I know the phone should not vibrate everytime you put battery back. But if you're able to go into odin you should be able to go into recovery (unless volume up key is damaged). But... while in odin... you can go back to stock rom and that should solve lots of your problems mate.
tys0n said:
Try wireless adb.
When connected to computer:
Code:
adb shell
su
reboot recovery
Click to expand...
Click to collapse
Hi tys0n, thanks for your suggestion. I did a little research and found that to connect the phone on adb wirelessly I'd need a previously installed app. Do you know any other way to get it?
Many thanks!
unotresocho said:
I did a little research and found that to connect the phone on adb wirelessly I'd need a previously installed app.
Click to expand...
Click to collapse
You also need a working rom.
If the usb connector on the phone is broken, you can buy another one for 4$ on ebay, but you'll need to solder it and it's a smd component with small pins, so it may be difficult.
You can also try to reboot your phone in safe mode:
http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?cdsite=uk&seq=898277
http://androidjinn.com/boot-android-4-1-safe-mode.html
deconectat said:
You also need a working rom.
If the usb connector on the phone is broken, you can buy another one for 4$ on ebay, but you'll need to solder it and it's a smd component with small pins, so it may be difficult.
You can also try to reboot your phone in safe mode:
http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?cdsite=uk&seq=898277
http://androidjinn.com/boot-android-4-1-safe-mode.html
Click to expand...
Click to collapse
Yeah, thats true. A working system is needed.
Just a question.. When you try to enter recovery (vol+/home/power), have you tried to keep pushing when it reboots?
Have you tried to connect usb in download mode (vol-/home/power) to see if Odin detects it?
Whiteout a being able to synch to your computer or accessing recovery mode youre not gonna be able to restore your phone. Your best bet is buying a new micro usb cable (they are inexpensive) and restore using Odin.
tys0n said:
Yeah, thats true. A working system is needed.
Just a question.. When you try to enter recovery (vol+/home/power), have you tried to keep pushing when it reboots?
Have you tried to connect usb in download mode (vol-/home/power) to see if Odin detects it?
Click to expand...
Click to collapse
Yeah, I keep pushing the buttons combo and it reboots again, it won't start to boot CM, just displays de Samsung logo and reboots. About the second question, I've tried connecting the computer while in Odin mode but it won't recognize it, I haven't tried with Odin itself open because my primary computer is a Macbook and don't have a PC with the Odin installed near to me all the time. Do you think it could recognize the device, despite the fact the whole PC doesnt?
Thanks!
Arrrroz said:
Whiteout a being able to synch to your computer or accessing recovery mode youre not gonna be able to restore your phone. Your best bet is buying a new micro usb cable (they are inexpensive) and restore using Odin.
Click to expand...
Click to collapse
Hi, I wish it'd be that easy! The problem is the pin entrance in the phone, not the cable. I have like 4 with me, but none of them works
unotresocho said:
Hi, I wish it'd be that easy! The problem is the pin entrance in the phone, not the cable. I have like 4 with me, but none of them works
Click to expand...
Click to collapse
Oh, I see. You mention you could access odin mode, Im not familiar with it, but maybe it is possible that you could flash TWRP again, or CWR from the odin recovery? Also if you don't mind me asking, do you know how did the phone's pin got damaged?
I'm starting to thing you aint got a recovery at the moment. I've seen this type of thing before. Problem is, if you can't get odin to work you won't be able to solve it :/
Arrrroz said:
Oh, I see. You mention you could access odin mode, Im not familiar with it, but maybe it is possible that you could flash TWRP again, or CWR from the odin recovery? Also if you don't mind me asking, do you know how did the phone's pin got damaged?
Click to expand...
Click to collapse
I have no idea. I didn't fall or anything, it just stopped working one day. I thought it had to do with a "software" thing more than hardware, because I was using CM 10.1 and of course it wasn't official, it had bugs. I actually was trying to go back to CM10 to see if that was the problem but I got stuck here.
Hi p970ies,
EDIT: NEW problems, see last pages.
here is my story:
I was on IZS v1.1, when I decided to go into recovery and make a full-wipe for having a "fresh install" again. You know, the phone was laggy, I had to many apps etc. I pressed the on/off-button for 1-2 secs to reboot into recovery, then my phone turned off and restarted but just with a "bright" black screen, the display was on. I thought "something went wrong", pulled the battery out and put it back in again, started, but then same screen again.
A few months ago an easy "unbricking" method (I know, not really unbricking) was to flash Redy2006's touch-recovery and boot into it with his scripts. So I flashed it (I know it's dumb, because of the u-boot and v30 thing, Idk), same result.
After that, I grabbed smartflash and two .bin/.fls packs of 2 roms, went into that special mode (phone off, press vol+, plug in) but there was no "sign" (screen that shows that you are in that mode) like the other day, the screen kept being black, but on.
Nonetheless the flashing worked and the software said everything alright. I started the phone but same result, in addition that there was now this effect: When the battery is put in and/or the phone is charging, the screen changes from being on and off. I can't do anything, no restarting with buttons, no LG screen, nothing but on and off, on and off. Every few seconds.
Thank you, I hope you experts can help me. (Even when I have the phone 2 years now and I was a ROM-junkie since the first day )
Edit: Tried smartflash with another patched v20 ROM. Tried KDZ Updater, just errors. But now the phone seems to boot, but there's nothing on the display, just the 4 softkeys are fading in and out.
Tomatengelee said:
Hi p970ies,
here is my story:
I was on IZS v1.1, when I decided to go into recovery and make a full-wipe for having a "fresh install" again. You know, the phone was laggy, I had to many apps etc. I pressed the on/off-button for 1-2 secs to reboot into recovery, then my phone turned off and restarted but just with a "bright" black screen, the display was on. I thought "something went wrong", pulled the battery out and put it back in again, started, but then same screen again.
A few months ago an easy "unbricking" method (I know, not really unbricking) was to flash Redy2006's touch-recovery and boot into it with his scripts. So I flashed it (I know it's dumb, because of the u-boot and v30 thing, Idk), same result.
After that, I grabbed smartflash and two .bin/.fls packs of 2 roms, went into that special mode (phone off, press vol+, plug in) but there was no "sign" (screen that shows that you are in that mode) like the other day, the screen kept being black, but on.
Nonetheless the flashing worked and the software said everything alright. I started the phone but same result, in addition that there was now this effect: When the battery is put in and/or the phone is charging, the screen changes from being on and off. I can't do anything, no restarting with buttons, no LG screen, nothing but on and off, on and off. Every few seconds.
Thank you, I hope you experts can help me. (Even when I have the phone 2 years now and I was a ROM-junkie since the first day )
Edit: Tried smartflash with another patched v20 ROM. Tried KDZ Updater, just errors. But now the phone seems to boot, but there's nothing on the display, just the 4 softkeys are fading in and out.
Click to expand...
Click to collapse
Oh man, its sad to hear that.
I can just think on two situations.
One is a broken screen, but thats pretty obvious.
And the other is a broken boot partition. Its very strange that you cant get into software upgrade mode. You sure you removed SIM, battery and SD, and then plugged it to the cable while holding the volume buttons?
I dont doubt you did it well, just making sure. Anyways AFAIK you should be able to enter that mode unless you got a broken boot partition.
Best of luck, sorry Im not of much help.
Grakel said:
Oh man, its sad to hear that.
I can just think on two situations.
One is a broken screen, but thats pretty obvious.
And the other is a broken boot partition. Its very strange that you cant get into software upgrade mode. You sure you removed SIM, battery and SD, and then plugged it to the cable while holding the volume buttons?
I dont doubt you did it well, just making sure. Anyways AFAIK you should be able to enter that mode unless you got a broken boot partition.
Best of luck, sorry Im not of much help.
Click to expand...
Click to collapse
Hi, thank you for your answer.
Yesterday oder so, I connected my phone without SIM, SD and battery while pressing vol+ to my pc and it showed the S/W-Update "Wait while update is in progress" or something. I was happy because the display isn't broken. But then I flashed again and the display is as black as before...
I thought about a broken bootloader. Do you guys know a way to fix it? Or the boot partition?
Tomatengelee said:
Hi, thank you for your answer.
Yesterday oder so, I connected my phone without SIM, SD and battery while pressing vol+ to my pc and it showed the S/W-Update "Wait while update is in progress" or something. I was happy because the display isn't broken. But then I flashed again and the display is as black as before...
I thought about a broken bootloader. Do you guys know a way to fix it? Or the boot partition?
Click to expand...
Click to collapse
Im pretty sure that if you can see the software update mode, you can unbrick the device.
When you said you reflashed something, do you actually mean that you smartflashed the fls and bin files from a stock v20 rom? AFAIK the bin file carries a bootloader with it so it should get fixed if your problem is the bootloader.
And by the way, while the phone has that black screen and is stuck booting... Are you able to use adb commands? You could try to jump to the recovery with "adb reboot recovery" to see if you got a working recovery.
Best of luck, tell me how it goes
Grakel said:
Im pretty sure that if you can see the software update mode, you can unbrick the device.
When you said you reflashed something, do you actually mean that you smartflashed the fls and bin files from a stock v20 rom? AFAIK the bin file carries a bootloader with it so it should get fixed if your problem is the bootloader.
And by the way, while the phone has that black screen and is stuck booting... Are you able to use adb commands? You could try to jump to the recovery with "adb reboot recovery" to see if you got a working recovery.
Best of luck, tell me how it goes
Click to expand...
Click to collapse
yep, I tried every version (10, 20, 30) in bin/fls and kdz. But I never got the screen to show something again.
And no, I can't use adb commands, sadly. It says "cannot find device" or something like that.
Tomatengelee said:
yep, I tried every version (10, 20, 30) in bin/fls and kdz. But I never got the screen to show something again.
And no, I can't use adb commands, sadly. It says "cannot find device" or something like that.
Click to expand...
Click to collapse
Huhmmm... Quite strange.
You can try to open up device manager, look for the phone (will probably have no drivers and the icon will have a yellow triangle) and force installing adb drivers. After that you are supposed to use adb even in middle of a boot.
I'd say that your best chance is to get to your recovery, so you can wipe everything (even formatting system) and start from scratch...
Anyways Im no expert at all... Just trying to help.
Grakel said:
Huhmmm... Quite strange.
You can try to open up device manager, look for the phone (will probably have no drivers and the icon will have a yellow triangle) and force installing adb drivers. After that you are supposed to use adb even in middle of a boot.
I'd say that your best chance is to get to your recovery, so you can wipe everything (even formatting system) and start from scratch...
Anyways Im no expert at all... Just trying to help.
Click to expand...
Click to collapse
Sometimes ADB works, but it says "device offline". When I flashed PRE-IZS fls/bin from the spanish forum, and then V30B bin/fls, something really weird happens: The phone is on, the wake-button works well - it turns on and turns off the display and the softkeys. But the screen doesn't show anything - just black.
Hello there!
Did You try out the B2C tool provided by LG? And there is one other tool provided by LG. Just try these oit. If they dont work, then try claiming it under warranty. They might replace the motherboard.
P.S: If You have the money, sell this piece of **** and get a Sony or Samsung. Cheers!
Sent from my LG-P970 using xda app-developers app
rokr05 said:
Hello there!
Did You try out the B2C tool provided by LG? And there is one other tool provided by LG. Just try these oit. If they dont work, then try claiming it under warranty. They might replace the motherboard.
P.S: If You have the money, sell this piece of **** and get a Sony or Samsung. Cheers!
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I think I'm going to buy a Nexus 4, but I have to convince my parents
Oh and yes, phone is older than 2 years and in Germany we only have 2 years of warranty I think.
Tomatengelee said:
Sometimes ADB works, but it says "device offline". When I flashed PRE-IZS fls/bin from the spanish forum, and then V30B bin/fls, something really weird happens: The phone is on, the wake-button works well - it turns on and turns off the display and the softkeys. But the screen doesn't show anything - just black.
Click to expand...
Click to collapse
An easy, possible fix for The Device offline is to use the latest ADB. Just use the attached zip anywhere and use ADB, its the latest version from the android SDK, but just the files required for ADB. My nexus 4 had the same problem, but Solved it by updating ADB.
ykumar00 said:
An easy, possible fix for The Device offline is to use the latest ADB. Just use the attached zip anywhere and use ADB, its the latest version from the android SDK, but just the files required for ADB. My nexus 4 had the same problem, but Solved it by updating ADB.
Click to expand...
Click to collapse
damn it says "error: device not found" when in S/W or bootloop... or device offline in bootloop
any ideas?
did you try patched bins ? (for being able to boot into recovery right after the flash process, maybe you just need right wipes)
#700th post yay...
Ilko said:
did you try patched bins ? (for being able to boot into recovery right after the flash process, maybe you just need right wipes)
#700th post yay...
Click to expand...
Click to collapse
Yes, I did, but Smartflash works "less" than the KDZ-Updater. Actually the phone beeped today while it was on (with some kdz flashed) :silly:
Is it possible to convert patched bin/fls files to kdz?
I don't know, probably not... what I can say is that kdzu doesn't perform full wipes since it's intended to update the system and keep datas at the same time. You probably need wipes...
Ilko said:
I don't know, probably not... what I can say is that kdzu doesn't perform full wipes since it's intended to update the system and keep datas at the same time. You probably need wipes...
Click to expand...
Click to collapse
Oh ok... But with KDZ-Updater, it's possible to turn the phone off and on (screens is "on" but shows the color black while the softkeys are on too).
I'll try again with Smartflash... Do you know another version of it or a good tutorial? Maybe I've done the wrong method or something...
there are several tuts in this forum. smartflash is the quickest and safest way to restore / unbrick as it erases everything in the internal memory
Ilko said:
there are several tuts in this forum. smartflash is the quickest and safest way to restore / unbrick as it erases everything in the internal memory
Click to expand...
Click to collapse
I know, but it never works. That problem is so weird! :silly:
Man, nothing works... After smartflashing display flashing off and on again, after kdz display on, softkeys flashing
ADB side service is not active while in S/W mode. The only chance to access to recovery is to boot normally, and access to the device via ADB. The problems are : device needs to pass initial boot process for being able to be detected by ADB (even if you don't see the desktop it's ok), and USB debug must be enabled by default...
so, if you can't pass initial boot process, no chance to use ADB, and, if it passes, usb debug must be enabled or device will remain offline...
Ilko said:
ADB side service is not active while in S/W mode. The only chance to access to recovery is to boot normally, and access to the device via ADB. The problems are : device needs to pass initial boot process for being able to be detected by ADB (even if you don't see the desktop it's ok), and USB debug must be enabled by default...
so, if you can't pass initial boot process, no chance to use ADB, and, if it passes, usb debug must be enabled or device will remain offline...
Click to expand...
Click to collapse
Is there a chance to enable it manually?
the only chance is to flash a ROM which have it enabled by default for the most of them.
mine died because of the new twrp 2.6. It has definitively corrupted the boot partition as even smartflash can't ends its process. I had to buy another device...
ok first things first, imma noob, and i did a stupid thing.
It started in last summer when i wasnt able anymore to connect the N7000 to my WIN 7 64bit (probably after an update to ICS /JB).
Well since i never needed to transfer files (64GB-sdxc) i didnt care much about it. but then in last times my phone/ram cache was full of so much unblockable bootloaded crapware so that i wanted to switch from a official 4.1.2 firmware to cyanogen. But since my USB wasnt working it wasnt that easy.
Side note: the USB-port was ****ed up before (short-circuit, screen woke up due to fake-loading). i fixed that by luck and some dark magic.. so of course i thought the connection problem were because oif the broken jack.
The day before yesterday i tried for 8 hours anything i could find to install another bootloader and flash CM (CWM / TWRP / Triangle away / minimal adb/fastboot etc.); didnt work, CWM seemed to boot up but loading failed all the time at 1/3rd of the bar at screen went black.
Yesterday my friend came over and i tried to use his USB-jack to connect my phone to my Pc, which failed. THEN i put the "broken" one from mine in his N7000; that was efficacious, everything worked fine, so the USB-jack wasnt the problem.
Later i had, out of frustration, moronism, and anger, the glorious idea to download and flash another (older) Kernel via mobile odin to install an old gingerbread stock rom on it afterwards.
That was stupid as i know now, all i can do now is enter download mode, but without USB-connectivity and the stock bootloader with the options reboot system / update from sd / wipe data / wipe cache / test redbend fota(FS) and boot, which stucks at the N7000-screen.
After i managed to **** things up i found an article which describes my (now former) USB-problem perfectly. it says to put in a special number combination on the phone to get to phoneUtil and then switch from modem mode to pda mode. i knew this screen before but i couldnt find it at the preferences on JB.
Now comes my question: What could be done to unbrick my phone? is there any help?
Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk
backstreetboy said:
Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
>Just to clarify: with USB-Jack i mean the USB-Port with the connector to the motherboard; sorry if i misused the word
I dont think so cause we used only his cable when he was here and my phone neither connected with mine nor with his USB-Jack, but both Jacks worked on his phone.
Pro-question: Is there a difference between (usual) USB-connection in booted mode and connection in download mode? i mean is download mode something like a "safe mode" where the USB doesnt need to run on 100% availabilty? Should i try to find the phone via Odin in downdload mode again by using his cable? i dont think this could work else.
Samsung galaxy note gt-n7000 bricked. Need HELP!!
The phone shows " Firmware upgrade issue encountered an issue. Please select recovery mode in Kies & try again". I cant go to recovery mode ie. vol up+home+power. THings I have tried:
1. with Kies the device isnt recognised. I have updated the driver as well.
2. with odin every thing fails... flashing "all samsung recovery.tar", flashing stock jelly bean, flashing .pit file
I have googled for days and tried many things but isnt working. Need help