Related
So I know I am not perfect at this, but I also am not new at it. I have reached an impass and am reaching out to the vast experience that is XDA. I was running on GB just fine and decided to flash a new kernel through SGS kernel flasher, bootloop, couldn't for the life of me get into recovery. So when I got home I tried to flash a new kernel through Odin, fail. Anything else I try to flash now fails. I don't know what to do or try, I can still get into dl mode, but definetly not recovery or even boot up now.
Please help as I don't think samsung will fix it as it is.
Try flashing with EZbase. Its a preconfigured set of files for flashing in EZodin. Meant specifically for recovery
http://forum.xda-developers.com/showthread.php?t=991792&highlight=ezbase
Kops said:
Try flashing with EZbase. Its a preconfigured set of files for flashing in EZodin. Meant specifically for recovery
http://forum.xda-developers.com/showthread.php?t=991792&highlight=ezbase
Click to expand...
Click to collapse
It is still failing to flash even through EZBase. Usually as soon as Firmware update starts it says Complete(write) operation fail.
Have you tried flashing with sd and sim removed?
GTi9000 insanity cm012/glitch
slaphead20 said:
Have you tried flashing with sd and sim removed?
GTi9000 insanity cm012/glitch
Click to expand...
Click to collapse
Still nothing but fail
Maybe try an older or newer version of Odin depending on what version your using, or try Heimdall. And try re-downloading all the files including odin, they maybe corrupt?And lastly try reinstalling the USB drivers. Hope something there works
Shrapnel2 said:
Maybe try an older or newer version of Odin depending on what version your using, or try Heimdall. And try re-downloading all the files including odin, they maybe corrupt?And lastly try reinstalling the USB drivers. Hope something there works
Click to expand...
Click to collapse
+1
agreed! best advice.
Leave battery out for 5-10 mins, redownload files as suggested, install on pc, odin 3.1 shouldn't present you with any problems so try that.
If you're getting into dl mode you WILL be able to flash.
J 3 M said:
+1
agreed! best advice.
Leave battery out for 5-10 mins, redownload files as suggested, install on pc, odin 3.1 shouldn't present you with any problems so try that.
If you're getting into dl mode you WILL be able to flash.
Click to expand...
Click to collapse
Ok i have been trying odin 1.7 and ezbase maybe i will get odin 3.1
Edit: whoa where can i find odin3.1
Odin failure may suggest a faulty USB port or USB cable,try using a different port to flash n if that does not work a different cable.. and it's also a possibility that the downloaded rom may be corrupted so download a new clean stock rom from SamFirmware.com ..hope this solves your issue!!
Sent from my GT-I9000 using XDA Premium App
doomsdaycs said:
Odin failure may suggest a faulty USB port or USB cable,try using a different port to flash n if that does not work a different cable.. and it's also a possibility that the downloaded rom may be corrupted so download a new clean stock rom from SamFirmware.com ..hope this solves your issue!!
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Well i did try to just flash a pit file and it worked. Also i tried different files and none worked.
So i think its toast. It wont charge and its deadnso no more dl mode. Thanks you all for your attempt at help for my sirry ass.
Edit: got it going by leaving the battery out for a while. Still no charging available though.
joelhon said:
Ok i have been trying odin 1.7 and ezbase maybe i will get odin 3.1
Edit: whoa where can i find odin3.1
Click to expand...
Click to collapse
use ezodin, which comes with the ezbase rom, read the instruction thoroughly, it is wonderfully simple....another classic from Nitr8.....and let me know how you get on......ezbase has full graphic walkthrough instructions too atb
slaphead20 said:
use ezodin, which comes with the ezbase rom, read the instruction thoroughly, it is wonderfully simple....another classic from Nitr8.....and let me know how you get on......ezbase has full graphic walkthrough instructions too atb
Click to expand...
Click to collapse
Sorry i meant that i tried ezodin and still it failed to flash.
So update time. I tried to flash jg8 jpu and jh2 all no luck. I even tried to flash just a bootloader and it failed as well. I really dont know anymore.
did you check the green confirmation screen in Odin and/or ezflash? if there is not confirmation that the application has found your device at the appropriate com port the flash won't work
klinggalaxy said:
did you check the green confirmation screen in Odin and/or ezflash? if there is not confirmation that the application has found your device at the appropriate com port the flash won't work
Click to expand...
Click to collapse
I think you meant yellow?
GTi9000 insanity cm012/glitch
I would ignore ezbase and flash jm9. If you have tried to change kernel with lagfix on, then you will need jm9. I recommend odin 1.7.
I have been in some sorry states with my phone, jm9 has always resolved any problem, even when ezbase has failed.
Sent from my GT-I9000 using XDA Premium App
klinggalaxy said:
did you check the green confirmation screen in Odin and/or ezflash? if there is not confirmation that the application has found your device at the appropriate com port the flash won't work
Click to expand...
Click to collapse
Really, are you kidding me? Do you not see my signature? Don't you think maybe I have done this a FEW times? I don't mean to be harsh, but seriously! That would be like saying make sure your computer is on before you try and flash. Make sure you take you pants down to have a sh*t. WOW! I am just a little tense and on edge right now so stupid comments are really not too appreciated. Plus it wouldn't even run if Odin didn't see your device. OMG!
UPDATE: Nothing was working so it is back to the store to have a look, fingers crossed they don't claim water damage or voided warranty for other reasons and want to charge me out the ass to fix it. Gotta love loaner phones, it's like being in the stone age.
Hello everyone,
I've got an Australian vodafone GT-i9000 which i bought that was having issues boot looping on power on. Sometimes it can boot loop for 20 seconds (looping at the Samsung screen, not the S screen) while others it can boot loop for 20 minutes before powering on.
I've tried flashing with ODIN using the 512 pit to numerous stock versions, most recently this : GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl (stock vodafone AU rom). The flash goes fine, however if I select format with the 512 PIT I can get the following message after the reboot:
E:format_volume: rfs format failed on /dev/block/mmcblkop2
Even if this message doesn't come up on flash, The phone keeps boot looping. Once started, the phone seems to work fine detecting internal & SD memory. I want a more permanent fix however, because if I was planning on giving it to a friend and 'leaving the phone boot looping until it starts' is probably too hard for them to understand. Also I'm not sure if there's an issue with the internalSD which is causing the problem, and if it is, it could cause further issues on more harder use.
Anyone had this sort of issue? The phone was flashed with ICS when the guy sent it to me, he said the bootloops started after he upgraded to ICS. I've got a 32gb SD- tried removing before flash and having it in while flash with no success (have seen a guide for installing on external SD for the i9000m- however it looks like you can only do this if the media device has completely failed). It seems to boot every time using a bootloader kernal (cant remember the name, ICE something from memory) into the recovery software- so maybe a busted sector on the internal SD?
Ideas anyone?
Cheers,
Dylan
Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium
calum96 said:
Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Thanks for the tip man, will give it a go now
dillzy1986 said:
Thanks for the tip man, will give it a go now
Click to expand...
Click to collapse
After second reboot after following your steps the boot looping started again. Any more ideas matey?
Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium
calum96 said:
Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Theres an error message about the CSC but it flicks up so quick i cant see it. It's not in red however- its just in yellow text. I'll see if i can get an error message outta it.
Hmm try flashing the cf root kernel with Odin after the install, don't tick repetition
Sent from my GT-I9000 running remICS-UX using XDA premium
1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...
saphirrot said:
1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...
Click to expand...
Click to collapse
Bit of a problem with that matey, Kies says the phone does not support firmware updates through KEIS and the rom i've been flashing with KEIS is the full standard rom from Vodafone- includes CSC, PDA and phone files. from memory the PDA file contains the standard bootloader yeah?
Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !
Did you get a look at the error? Or try flashing the cf root kernel?
Sent from my GT-I9000 running remICS-UX using XDA premium
saphirrot said:
Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !
Click to expand...
Click to collapse
GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl is the firmware i'm using, so no good with the boot loader
I'll try a JW5 version as suggested .
Also to the guy above, no luck with getting the error message, i'll give it another flash now and see how it goes.
Cheers guys really appreciate it
Hi my note was stuck at Samsung screen, so I flashed with stock 4.0.4 firmware (Australia & Optus) and now in Odin in constantly hangs at the hidden.img part..
Is the phone screwed, I've heard the emmc block is damaged now? Is there is fix for this?
Thanks in advance!
Are you able to enter download mode now
Try flashing a stock gb rom
rajsekhar.300 said:
Are you able to enter download mode now
Try flashing a stock gb rom
Click to expand...
Click to collapse
Thanks for the response! Yes can enter download mode holding the power, volume and home buttons. I've tried stock Australian roms and stock Hong Kong roms as I'm not sure whether its a AU model or HK model.. They're 4.0.4, I'm not sure what you mean by GB? Do you mean ginger bread actually and I should try download a rom that isn't 4.x.x??
Thanks for your time..
Yes i mean gingerbread(2.3.6)
Try flashing a stock gingerbread(2.3.6) rom
rajsekhar.300 said:
Yes i mean gingerbread(2.3.6)
Try flashing a stock gingerbread(2.3.6) rom
Click to expand...
Click to collapse
thanks I tried that with a HK 2.3.6 rom and same issue, tried heaps of 2.3.6 roms, all same issue hangs at hidden.img
guess something screwed bigtime and out of my capabilities thanks anyways mate!
8evre1 said:
thanks I tried that with a HK 2.3.6 rom and same issue, tried heaps of 2.3.6 roms, all same issue hangs at hidden.img
guess something screwed bigtime and out of my capabilities thanks anyways mate!
Click to expand...
Click to collapse
after one installation is stuck.. b4 installing other rom... u need to reboot the phone and try again in download mode.. if u continue from the same plc where its stuck,, it will never progress
Did you try take your battery out a min and put it back again and flash the rom again.
Sent from my GT-N7000 using xda premium
Be careful, you might have one of your partition broken...
My friend had this before, and he finally succeeded to flash N7000DXLR5 firmware from http://forum.xda-developers.com/showthread.php?t=1424997
But then he checked his storage capacity was reduced to 7GB...
Do you have a warranty? If you've got some binary counter or yellow triangle, it is better to remove it first using a jig
Then go to the nearest Samsung Service Center, hopefully you'll get a replacement...
hm... definitely I'm sure one of his file partition is already corrupted...
@OP, you may need to check the thread on the PIT file method to revive your Note(http://forum.xda-developers.com/showthread.php?t=1667886)... perhaps you might have the dreaded bug already...
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
BIGGEST EDIT:
All of the methods in this thread are NOT WORKING. Still stops at factoryfs and CWM says "Installation Aborted". SO, WHAT I CAN DO? He is desperated, I'm desperated. PLEASE ANSWER FAST !!
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
Click to expand...
Click to collapse
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
msedek said:
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
Click to expand...
Click to collapse
He is able to enter into DL mode. Even PIT doesn't work.
Mr.Indigo said:
He is able to enter into DL mode. Even PIT doesn't work.
Click to expand...
Click to collapse
Well then your only option its the warranty or pay samsung either for a new phone or a mother board replacement...
That pit file method its only a partial solution to help you get your device partially working maybe a couple of months.. When the emmc bug happens it does damage the Emmc chip so the hardware its fried and there's no software that can repair it..
The pit method could work for someone but not for others.. Depends on the damage
Tapatalking on my n7000
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried it, but didn't work. This solution is too much dangerous?
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
It's doesn't matter if it's 1 or 3 files.. The pit file just repartition the emmc in order to reacomodate the memory and so you can flash the rom.. Flashing separately phone csc and PDA won't make any difference..
Tapatalking on my n7000
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
Click to expand...
Click to collapse
I have the same problem!!!
I'm desperated, since it's my main phone!
I will try the last solutions!!!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
That's what I need.... I didn't found the 3 files. I will try!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Aldenucci said:
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Click to expand...
Click to collapse
IDK, you must do it at your own risk.
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Mr.Indigo said:
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Click to expand...
Click to collapse
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
msedek said:
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
Click to expand...
Click to collapse
He didn't have warranty. I'm trying to flash any PIT which owns factoryfs. He said that fails to wipe into some minutes and I have 88 factoryfs PITs. So I have to flash ALL of them to know. BTW I can flash a kernel using ODIN!
mistajoe83 said:
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
Click to expand...
Click to collapse
My problem is SOLVED!
I found 88 PITs, whick it was intended for factoryfs. I tried the first ten PITs, and the 7th WORKED!
It was 17xx MB. Now the phone is working! THANKS FOR ALL OF YOUR GUYS HELP!
Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx
Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app
yes i know,i saw later.can admin move this thread to help forum
i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?
The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?
I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?
thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this
If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app
No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab
CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app
Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys
For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app
If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app
Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable
Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2