Database Develop

[Q] Stock Nook: Battery too low to power ON.

Ok so this nook was bought brand new in December 2010 For my mother In-law. She hasn't used it much. So I asked if I could put Android on it? She said sure cause she hasn't used it at all. As a matter of fact the NC was totally dead when she gave it to me. So I get back to my house and put it on the stock charger. I let it charge for 2 hours. I picked it up and turn it on and all I see is this message: Battery too low to power ON. I did a search and turned up similar problems but the nc where all rooted. I'm wondering if other people have had this same problem? And what they did to solve this as it is more then likely an easy fix. A. Take it back to the store and exchange it. Or. B. Send it off for repairs. C. Someone On XDA has the answer.
Also I've done some trouble shooting like trying to reset it. Also I've used 3 Other chargers and its still not charging or turning on.
Edit: It turns on it just stays at the screen with a red battery displaying the message in the title. Also after charging for a while the screen kind of lites up like its going to turn on but only goes black after that and then comes back to the same red battery screen.

jvillejoe said:
Ok so this nook was bought brand new in December 2010 For my mother In-law. She hasn't used it much. So I asked if I could put Android on it? She said sure cause she hasn't used it at all. As a matter of fact the NC was totally dead when she gave it to me. So I get back to my house and put it on the stock charger. I let it charge for 2 hours. I picked it up and turn it on and all I see is this message: Battery too low to power ON. I did a search and turned up similar problems but the nc where all rooted. I'm wondering if other people have had this same problem? And what they did to solve this as it is more then likely an easy fix. A. Take it back to the store and exchange it. Or. B. Send it off for repairs. C. Someone On XDA has the answer.
Also I've done some trouble shooting like trying to reset it. Also I've used 3 Other chargers and its still not charging or turning on.
Edit: It turns on it just stays at the screen with a red battery displaying the message in the title. Also after charging for a while the screen kind of lites up like its going to turn on but only goes black after that and then comes back to the same red battery screen.
Click to expand...
Click to collapse
what are you charging from? are you using the stock nook cable and plug?

Yes. And charging it from the wall outlet. Did that with the stock charger. my charger from my HD2 and also tried with the charger from my vibrant. All have the same affect. It has the red battery and the messege below and it also has been a total of 6 hours of charging 2 hours each with the all the chargers.

That stinks. You may have to contact B&N for it. If your using the stock and other chargers then it must be a battery failure.

altimax98 said:
That stinks. You may have to contact B&N for it. If your using the stock and other chargers then it must be a battery failure.
Click to expand...
Click to collapse
Yeah seems to me thats what it must be I'll post back what I find out.

When that message is displayed, try holding the power button for 30+ seconds and then turning it back on.
That has worked for me the couple of times it seemed stuck on that screen.

RobertsDF said:
When that message is displayed, try holding the power button for 30+ seconds and then turning it back on.
That has worked for me the couple of times it seemed stuck on that screen.
Click to expand...
Click to collapse
Nope its not working at all. I was wondering is there an SD card that come with the NC bought brand new from B & N?

jvillejoe said:
Yes. And charging it from the wall outlet. Did that with the stock charger. my charger from my HD2 and also tried with the charger from my vibrant. All have the same affect. It has the red battery and the messege below and it also has been a total of 6 hours of charging 2 hours each with the all the chargers.
Click to expand...
Click to collapse
If you're using other chargers, it's possible that you've damages the usb port. The NC uses a non standard usb port, which has two stages. The first stage is standard 5 pin uusb communication, the second stage is non-standard 12 pin charging...
Sent from my Nexus One using XDA Premium App

Non-Standard chargers...
As far as I can tell it works fine with any microusb cord.
Their charger cables break...(bend and break) very easy. I have gone through 2.
The upside is that their charger provides power far faster than the normal microusb cords.
At this point...I'm charging mine almost exclusively from my stock evo cord.
If you don't turn off the screen when charging...it may not have enough power coming in to actually build a charge without their cable.

danger-rat said:
If you're using other chargers, it's possible that you've damages the usb port. The NC uses a non standard usb port, which has two stages. The first stage is standard 5 pin uusb communication, the second stage is non-standard 12 pin charging...
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
I never used another charger besides the stock charger that came with the NC. Up until this happened all that was ever used was the stock cable for charging. I only used another charging cable once I ran into these problems cause I figured the cable was damaged. Its happened to me before with other devices. But the same results happen with every cord I use. When I plug it in it lights up and shows the red battery screen. So that tells me that the cord or USB port couldn't be the problem. Cause its clearly getting power its just not charging.

Fattychance said:
As far as I can tell it works fine with any microusb cord.
Their charger cables break...(bend and break) very easy. I have gone through 2.
The upside is that their charger provides power far faster than the normal microusb cords.
At this point...I'm charging mine almost exclusively from my stock evo cord.
If you don't turn off the screen when charging...it may not have enough power coming in to actually build a charge without their cable.
Click to expand...
Click to collapse
When charging I can not turn the screen off it's stuck on the screen with a red battery.

jvillejoe said:
Nope its not working at all. I was wondering is there an SD card that come with the NC bought brand new from B & N?
Click to expand...
Click to collapse
No. They sell it without one...the 8GB internal storage is enough for looooottts of books. The microsd was just a nice + for people with lots and lots of music.

I had this issue as well, but I found a fix!
No matter what I did or how long I let it charge, it would always have that red low battery icon.
What I ended up doing to fix it was opening up the back of the unit and disconnecting the battery cable from the unit. I then plugged it directly into the wall without the battery connected to see if it would boot, though I don't know if that was necessary, I don't even remember if it booted that way or not.. I think it did not.
Anyway I unplugged the power cable again, reconnected the battery, then plugged in the power cable and tried to boot and it booted up perfectly after that. The battery icon indicated 13% charge, but it quickly charged back up just fine.
FYI I left the unit in the car overnight right before this happened, and it was pretty chilly that night, 10-20 degreed Fahrenheit. I suspect that caused the issue for some reason, so I've been sure not to do so since.
P.S. I had to do a fair amount of googling around before I found good instructions on taking apart the NC. I think I had to take off the 2 screws under the SD card slot and use a butter knife to just pry the back off. It's just held in with clips and you can't tell it was opened except for the little stickers over the screw holes.

bstock said:
I had this issue as well, but I found a fix!
No matter what I did or how long I let it charge, it would always have that red low battery icon.
What I ended up doing to fix it was opening up the back of the unit and disconnecting the battery cable from the unit. I then plugged it directly into the wall without the battery connected to see if it would boot, though I don't know if that was necessary, I don't even remember if it booted that way or not.. I think it did not.
Anyway I unplugged the power cable again, reconnected the battery, then plugged in the power cable and tried to boot and it booted up perfectly after that. The battery icon indicated 13% charge, but it quickly charged back up just fine.
FYI I left the unit in the car overnight right before this happened, and it was pretty chilly that night, 10-20 degreed Fahrenheit. I suspect that caused the issue for some reason, so I've been sure not to do so since.
P.S. I had to do a fair amount of googling around before I found good instructions on taking apart the NC. I think I had to take off the 2 screws under the SD card slot and use a butter knife to just pry the back off. It's just held in with clips and you can't tell it was opened except for the little stickers over the screw holes.
Click to expand...
Click to collapse
Thanks for the feed back. I'm wondering by un-pluging the battery from the nook if it resets it. Kind of like if a phone freezes or if your computer freezes and you pull the battery. Seems like a plan. Not sure if this is what I'll do as I'm sure its still under warranty. If it comes back and its not covered or B & N wont replace it I guess thats my only hope.

im having the same problem as well it was off for a while and now its at the red batter screen. i guess ill try and take it apart?

CLMT said:
im having the same problem as well it was off for a while and now its at the red batter screen. i guess ill try and take it apart?
Click to expand...
Click to collapse
If your not worried about voiding the warranty then sure I guess its worth a shot.

So I got it fixed right. All it was was a faulty cable lol!

jvillejoe said:
So I got it fixed right. All it was was a faulty cable lol!
Click to expand...
Click to collapse
I had this problem too, but I'm not sure "faulty" is the right word for the cable.
My friend borrowed my nook and returned it with a dead battery (Thanks asshole). So I plugged it into my computer at work and just got the always-on low battery message. After 45 minutes I took it to my car so I wouldn't forget it. I plugged it into my USB charger in the car using a different cable. Two hours later, same state.
When I got home I pugged it into the Nook wall charger with yet another cable (not the nook's original) and got the same thing. I searched here to see if I could figure out what was going on and decided to try the original cable with the wall plug. literally two seconds after plugging it in it started booting into Froyo.
I'm sure I didn't have four "faulty" cables. I think those that are saying you should be using the original are correct. The others worked fine when the battery wasn't empty, but mine only responded to the original once it got to the point of the unending low-battery message.

Original charger / cable required with totally empty battery
Same here. With battery completely empty and non standard cable,stuck at red battery sign forever. With orginal cable, boots fine and charges.

solution I found
Have CM7 installed on SDCard, got the battery icon, even with the unit plugged into the charger with oem equipment. Held the power button 'til the unit turned off completely, removed the sdcard, rebooted. Nook booted into stock fine, turned off, re-inserted sdcard and rebooted. All is well.

[FIX] Revive phone from the drain of death

this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.

Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?

Celestial Fury said:
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Click to expand...
Click to collapse
no you can't speed up charging. Charging speed is limited to cable quality, AC plug quality and software/hardware restrictions.
the USB on PC and magnetic cable combo for some reason helps to start the phone like you do when you want to recharge an depleted car battery.
It just open the circuit and let the phone charge again.

someone please confirm if this works for more than one person/situation.
Thanks for assistance btw, hopefully it works for all of us.

Nope doesn't work.
I tried it already.
Sorry guys.

Worked for me. Took some time before PCC registered it though.

help me please
Asadroid said:
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Click to expand...
Click to collapse
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you

pheel said:
Nope doesn't work.
I tried it already.
Sorry guys.
Click to expand...
Click to collapse
did the computer detected the phone but for a brief moment like trying to install the drivers?
Kirkymole said:
Worked for me. Took some time before PCC registered it though.
Click to expand...
Click to collapse
@Kirkymole;
can you share what you did exactly and what i can up to the guide?
and im glad that i could help you
momo-infos said:
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
Click to expand...
Click to collapse
as i told you on the PM write up how you bricked it exactly and what steps have you done so i can help you correctly.
i will post pictures of the procedure of how i did it when i get a few hours to edit and upload it.

Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.

Video instruksion would be very helpfull maybe

Asadroid said:
did the computer detected the phone but for a brief moment like trying to install the drivers?
Click to expand...
Click to collapse
Yes. But the computer simply recognised it as a normal "unknown" usb device with usb debugging disabled.
--
ruinkhan said:
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Click to expand...
Click to collapse
Exact same thing happened to me. "USB debugging off"

All I did was plug in the magnetic connector, then with the PC turned on and Pc companion running I plugged in the USB, it took about 20 minutes to recognise it but once it did, I unplugged it, left it on charge via the magnetic plug for around 5 hours and although the charging symbol never appeared it booted into recovery the normal way (I did that just to see what would happen) then restarted the phone via Cwm and it worked normally from then on.

Kirkymole said:
although the charging symbol never appeared it booted into recovery the normal way .
Click to expand...
Click to collapse
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?

ruinkhan said:
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
Click to expand...
Click to collapse
The symbol that appears on the screen.

I also kind of used this method.
I directly plugged in, in these steps.
1) Plug in magnetic charging dock with 1A charger (Plugged USB into charger)
2) Plug in USB with 2.1A charger (Plugged USB into charger)
Dim-ish red light popped up and the phone began booting.
Plugging into the phone for me wasn't as effective as plugging into the charger as I left it for a while and nothing happened but upon plugging USB into my single dual port charger this method worked to get my phone onto the charging screen, Android L
Had to plug the USB in and out a few times, not too many times, but eventually it booted up to the charging screen.
Be patient is the key I suppose?

For me worked with magnetic and usb 1A charger! Thanks!

HTC One doesn't charge.

Hi, I bought an HTC One in July, and today, when I woke up, the phone was connected to the charger but it wasn't charging.
When the phone is connected to the charger or computer, it does nothing. When I turn off the phone, it charges but after a few seconds, the screen and led turn off and after another few seconds, it charges again.
And a little dude, where are the humidity sensors?
Thanks!

Up?

Maybe there was a surge (over voltage) and it destroyed the charging port or the charger. Try changing the charger and see where the problem lies.
No humidity sensor in htc one afaik.
check phonearena for sensor details.
Forgot to mention - The led switching off and temp power shows signs of drained out battery.

enreador said:
Hi, I bought an HTC One in July, and today, when I woke up, the phone was connected to the charger but it wasn't charging.
When the phone is connected to the charger or computer, it does nothing. When I turn off the phone, it charges but after a few seconds, the screen and led turn off and after another few seconds, it charges again.
And a little dude, where are the humidity sensors?
Thanks!
Click to expand...
Click to collapse
Could be a loose connection maybe? Try moving the USB plug around a little. It sounds like a hardware issue. Does it do the same with the phone completely off?

JasSingh93 said:
Could be a loose connection maybe? Try moving the USB plug around a little. It sounds like a hardware issue. Does it do the same with the phone completely off?
Click to expand...
Click to collapse
I tried changing the charger and moving it, but it doesn´t charge... Completely off it does, yes...
Do you recommend me to call HTC to repare the phone?
Thanks :good:

enreador said:
I tried changing the charger and moving it, but it doesn´t charge... Completely off it does, yes...
Do you recommend me to call HTC to repare the phone?
Thanks :good:
Click to expand...
Click to collapse
Yes as it doesn't seem like a software issue, it must be something to do with the phone, USB cable or charger. If you've confirmed the cable and charger work then the next step would be to contact HTC. They should be able to help you out.

[Q] Water damage

I water damaged my Z, the water got in through the power,usb flap.
I turned it off,I opened the device back cover,and let it in rice for 3days.
When it turned on it booted all nicely but when I tried to open the lockscreen the device shuts down.
Now I put it in a wall socket and it gives the red light,when i turn it on it vibrates but doesn't do anything,black screen.The xperia doesn't want to charge too.
The fastboot works,so as the flashtool.Only connecting to pc doesn't work.
I don't have warranty and no Sony centre in my country.What should I do?

beni8978 said:
I water damaged my Z, the water got in through the power,usb flap.
I turned it off,I opened the device back cover,and let it in rice for 3days.
When it turned on it booted all nicely but when I tried to open the lockscreen the device shuts down.
Now I put it in a wall socket and it gives the red light,when i turn it on it vibrates but doesn't do anything,black screen.The xperia doesn't want to charge too.
The fastboot works,so as the flashtool.Only connecting to pc doesn't work.
I don't have warranty and no Sony centre in my country.What should I do?
Click to expand...
Click to collapse
Bad luck my friend, your phone is dead. Water probably damaged screen and motherboard. You can try to clean it with contact cleaner (contact spray) like this: http://www.wd40specialist.com/products/contact-cleaner/ but don't expect miracles.

beni8978 said:
I water damaged my Z, the water got in through the power,usb flap.
I turned it off,I opened the device back cover,and let it in rice for 3days.
When it turned on it booted all nicely but when I tried to open the lockscreen the device shuts down.
Now I put it in a wall socket and it gives the red light,when i turn it on it vibrates but doesn't do anything,black screen.The xperia doesn't want to charge too.
The fastboot works,so as the flashtool.Only connecting to pc doesn't work.
I don't have warranty and no Sony centre in my country.What should I do?
Click to expand...
Click to collapse
man the same happen to me but i take it to someone he open it clean it and changed something inside cost me 35$.
try to find someone good to do the same to u.

What is that thing you've changed?
Sent from my HTC One using XDA Premium 4 mobile app

neoxx3m said:
Bad luck my friend, your phone is dead. Water probably damaged screen and motherboard. You can try to clean it with contact cleaner (contact spray) like this: but don't expect miracles.
Click to expand...
Click to collapse
I find it a little too fast to say that the phone is dead.
Do you know how much battery charge you had left? Because the Li-Ion batteries have a safety circuit that shuts them down when the battery voltage gets below a certain point. The battery still has some charge, but only to maintains its health for a limited amount of time, and you would have to find a shop that can "jumpstart" it. Your battery is in "safe sleep" if it shows 0,00 - 0,10V or anything like that.
Replace the USB port if the RED light doesn't light up at all, or blinks irregularly. If the phone shows the red led constantly, but doesn't want to turn on, measure your battery and charge it directly. There has to be some shop nearby that works on circuit boards, and if you ask them nicely and bring them the parts, they will surely change the port for you for a few nickels . But that's only if you' re sure that the battery is in good condition.

emiglet said:
I find it a little too fast to say that the phone is dead.
Do you know how much battery charge you had left? Because the Li-Ion batteries have a safety circuit that shuts them down when the battery voltage gets below a certain point. The battery still has some charge, but only to maintains its health for a limited amount of time, and you would have to find a shop that can "jumpstart" it. Your battery is in "safe sleep" if it shows 0,00 - 0,10V or anything like that.
Replace the USB port if the RED light doesn't light up at all, or blinks irregularly. If the phone shows the red led constantly, but doesn't want to turn on, measure your battery and charge it directly. There has to be some shop nearby that works on circuit boards, and if you ask them nicely and bring them the parts, they will surely change the port for you for a few nickels . But that's only if you' re sure that the battery is in good condition.
Click to expand...
Click to collapse
Oxydised components on motherboard are probably shorted out, I see this so many times in repair center. The best solution is to first clean motherboard with contact cleaner and than try to plug battery back and see if the battery is charging. Shorted out motherboard, in 80% of cases, is dead motherboard.

My motherboard is perfectly fine.
I opened with my friend my Z and his Z.He put my motherboard in his device and his Z worked with my motherboard and all my files were shown there. So i guess my screen is dead? What do you think guys?
Sent from my HTC One using XDA Premium 4 mobile app

beni8978 said:
My motherboard is perfectly fine.
I opened with my friend my Z and his Z.He put my motherboard in his device and his Z worked with my motherboard and all my files were shown there. So i guess my screen is dead? What do you think guys?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try with your friends battery?

St.Jimmy90 said:
Try with your friends battery?
Click to expand...
Click to collapse
He wanted to change the battery too but he said it is much harder than changing the motherboard.
My current symptoms are:
When i touch the power button the red light blinks three times.(that means the battery is empty)
When I press volume up+power button it vibrates three times.
The device connects to flashtool,adb

Z1 Sudden Death!

Hello!
Yes, it's right. I guess it's my turn to get the sudden death of my beloved Xperia Z1.
It's dead, but I don't think it's completely dead and I'm hoping for some help from tech navy's around here and from other people who got the sudden death issue so here's what happened:
I woke up early in the morning at around 8 am and the battery was at 9% and I had no time to put it on charger because I'm in a hurry, so I said I'll put it on charger in car same as always. I use the magnetic cable that I removed from the dock (cuz my sis lost my charging cable, I have to use my magnetic one every time) and I almost always charge my phone in the car with that cable. The phone was working perfectly so I locked the screen and connected the magnetic charger and the charging light didn't come on so I wanted to check if it's charging.... and found out that it's dead (no charging LED, not turning on, no Power + Volume up vibration, no nothing) so I went back to the house and put it on my mother's charger (Micro USB) and got a red LED light as if it's charging, but it's not. still doesn't power up and everything and yes, I've tried the reset button near the SIM card, nothing wants to work.
I took it to Sony service center later that day and they said it will take 3 days because of the traffic they're having, and I have no warranty because I bought it on release which is more than a year ago. After 3 days, they told me that it's a motherboard problem and it got water damaged (while the last time I put it in water was about 2 weeks before that day, and he saw that the white thing is red) and it can't be fixed pay some money and take a new one (just phone no boxing no nothing) and I said no thanks and took the phone to another shop and he checked it and told me that he can't fix it.
I cracked open my phone and I can't see any water damage in it, everything seems to be perfectly fine. I've tried everything I could think of, everything I read on the internet, but nothing seems to work, and the pc doesn't even notice that I connected my phone, I've tried connecting it in fast boot, and flash mode, but nothing works it just keeps the red LED light on. Disconnecting the batter didn't help at all.
I called Sony service center and asked them if I can buy a motherboard from them and they said that they don't even have replacement parts for any Z series phone because they're not authorized by Sony to repair the waterproof/resistant Z series phones (The service center here isn't Sony, but it's an authorized service center by Sony) so at that point I lost hope to get it repaired.
All that happened back in January, but now that summer is here, I want to fix it somehow. But I have no clue where to start, and I'm not sure how to confirm that it's the motherboard that's damaged. is there a way to find exactly where the problem is? I have a soldering iron and everything needed to repair the phone, all I need is to know where's the problem! I can buy parts off of internet, and I will if I need to, but I'm not gonna buy a whole motherboard from ebay because I simply can't trust that motherboard.
Sorry for the lengthy post, and thanks for any help you'll give.
Regards,
~J2C

Bump

Bump?

leave your phone for a weed and try to charge it . if your phone still led light I think your battery die not your phone .

Your battery is dead, if you have taken it apart already just buy a new battery or buy a micro usb lithium battery charger from ebay and hook it up to your battery (by itself) I posted about my experience here http://forum.xda-developers.com/xperia-z1/help/red-led-flashes-charging-solution-t3141345 If you have access to voltmeter you can check the battery voltage, it is like 2.6v or there abouts. Your phone will not charge a battery this far gone.
Nz

thaiminh40 said:
leave your phone for a weed and try to charge it . if your phone still led light I think your battery die not your phone .
Click to expand...
Click to collapse
Huh? I don't get it. btw we don't have weed here in my place.
notzippy said:
Your battery is dead, if you have taken it apart already just buy a new battery or buy a micro usb lithium battery charger from ebay and hook it up to your battery (by itself) I posted about my experience here http://forum.xda-developers.com/xperia-z1/help/red-led-flashes-charging-solution-t3141345 If you have access to voltmeter you can check the battery voltage, it is like 2.6v or there abouts. Your phone will not charge a battery this far gone.
Nz
Click to expand...
Click to collapse
I don't think that the battery is dead, because:
1- I get a STABLE red light when I put it on charger or connect it to PC.
2- I've tried a method that's said to revive a dead battery on a Z1 (or Z series) and it didn't work.
3- If it was really the battery, then this should've worked! But no, When I connect the motherboard with test point properly connected, the PC just doesn't recognize the phone.
Regards,
~J2C

Just2Cause said:
I don't think that the battery is dead, because:
1- I get a STABLE red light when I put it on charger or connect it to PC.
2- I've tried a method that's said to revive a dead battery on a Z1 (or Z series) and it didn't work.
3- If it was really the battery, then this should've worked! But no, When I connect the motherboard with test point properly connected, the PC just doesn't recognize the phone.
Regards,
~J2C
Click to expand...
Click to collapse
I followed all those methods as well and none worked for me either. Measure your battery voltage with a voltmeter, it is the cheapest way to verify if the issue is battery or something else.
Nz

notzippy said:
I followed all those methods as well and none worked for me either. Measure your battery voltage with a voltmeter, it is the cheapest way to verify if the issue is battery or something else.
Nz
Click to expand...
Click to collapse
Hello!
I finally got access to a multimeter today and checked my battery's voltage and it was about 3V so I can confirm that the problem is not the battery.
It must be some kind of hardware problem, and I don't think that you really did try the test point fix and you just said yea yea bla bla YOUR BATTERY IS THE PROBLEM! No, it's not.
Any other suggestions?
Thanks!
Regards,
~J2C

3v is still to low in my opinion
Sent from my C6906 using Tapatalk

notzippy said:
3v is still to low in my opinion
Sent from my C6906 using Tapatalk
Click to expand...
Click to collapse
I've charged it, and still not working.

Bumping cuz I want my good ol' Z1 back

I've experienced a "sudden death" once, it was really scary to me.
I've flashed a custom rom, rebooted and went to bed directly without waiting "android is upgrading" or whatever.
The next day I saw that my phone was not opening. There was no red led to indicate low battery, I plugged to charger for some seconds and didn't see a red light to indicate "charging" so it was weird to me. The solution was to charge it for more than 30 minutes and afterwards it went to 1%! Maybe you should try to charge with the cable like normally and wait for a while
Source: http://support.sonymobile.com/global-en/xperiaz1/faq/I-cannot-power-on-my-device/
Hope it works! 30 minutes was so long and worrying though :silly:

TFutoMaki said:
I've experienced a "sudden death" once, it was really scary to me.
I've flashed a custom rom, rebooted and went to bed directly without waiting "android is upgrading" or whatever.
The next day I saw that my phone was not opening. There was no red led to indicate low battery, I plugged to charger for some seconds and didn't see a red light to indicate "charging" so it was weird to me. The solution was to charge it for more than 30 minutes and afterwards it went to 1%! Maybe you should try to charge with the cable like normally and wait for a while
Source: http://support.sonymobile.com/global-en/xperiaz1/faq/I-cannot-power-on-my-device/
Hope it works! 30 minutes was so long and worrying though :silly:
Click to expand...
Click to collapse
Nope!
You obviously had a dead battery, and I've already left it on charger for 2 continuous days.
I clearly have a hardware problem. Probably a dead chip as the phone died the moment I connected the magnetic charger.

Just2Cause said:
Nope!
You obviously had a dead battery, and I've already left it on charger for 2 continuous days.
I clearly have a hardware problem. Probably a dead chip as the phone died the moment I connected the magnetic charger.
Click to expand...
Click to collapse
If u disasassembled your phone then simply disconnect battery, connect phone to pc (with disconected battery) with pressed volume button down, if phone working u should see blue led light (flashmode)-if this happen then your battery is fault (maybe not, try to flash stock rom if u see flashmode), if not then it is mainboard.

Dadovvv said:
If u disasassembled your phone then simply disconnect battery, connect phone to pc (with disconected battery) with pressed volume button down, if phone working u should see blue led light (flashmode)-if this happen then your battery is fault (maybe not, try to flash stock rom if u see flashmode), if not then it is mainboard.
Click to expand...
Click to collapse
I don't think that you actually read the first post, but no problem.
The computer doesn't recognize the phone at all, with or without battery. And I've posted a link a couple of posts back that leads to a "hard brick fix" thread and even that didn't work for me.
Anyways, I just tried what you told me to try, but no. No flashmode, no fastboot, no nothing.

Just2Cause said:
I don't think that you actually read the first post, but no problem.
The computer doesn't recognize the phone at all, with or without battery. And I've posted a link a couple of posts back that leads to a "hard brick fix" thread and even that didn't work for me.
Anyways, I just tried what you told me to try, but no. No flashmode, no fastboot, no nothing.
Click to expand...
Click to collapse
Yes i actually read your post but sometimes phone will not be able to connect with pc if battery is fault, it happens when user have Sleep of death, thats why i say to connect withouth battery to pc.