Database Develop

[Q] Seriousy bombed my note :'-(

Hi Guys,
Before I posted this I have trawled the forums looking for the answer but only found part answers hence this post.
Ok I rooted y n7000 using framaroot then installed superuser and cwm all good to this point.
I then tried to install a custom rom and this is where it all went pear shaped.
I ave been left with Android system recovery <3e>.
Every time I try to install a rom I get error message :
signature length doesn't match EOCD marker
signature verifaction failed
Ok so I have now downloaded a stock ROM,ODIN and Keis however Keis will not connect to my phone and I have no idea how to use odin.
I really would appreciate your help Guys

bazza500 said:
Hi Guys,
Before I posted this I have trawled the forums looking for the answer but only found part answers hence this post.
Ok I rooted y n7000 using framaroot then installed superuser and cwm all good to this point.
I then tried to install a custom rom and this is where it all went pear shaped.
I ave been left with Android system recovery <3e>.
Every time I try to install a rom I get error message :
signature length doesn't match EOCD marker
signature verifaction failed
Ok so I have now downloaded a stock ROM,ODIN and Keis however Keis will not connect to my phone and I have no idea how to use odin.
I really would appreciate your help Guys
Click to expand...
Click to collapse
What custom rom did you try to install? Could be a bad download.
Does the phone still boot?

What was the stock software that was on your note?
that's very important question

kaborayyan said:
What was the stock software that was on your note?
that's very important question
Click to expand...
Click to collapse
Hi,
It was jb 4.1.2 XXLT9 hope this helps.

bazza500 said:
Hi,
It was jb 4.1.2 XXLT9 hope this helps.
Click to expand...
Click to collapse
Use this thread as tutorial for using Odin and lot more.

hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?

bazza500 said:
hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?
Click to expand...
Click to collapse
What links do you need?

nokiamodeln91 said:
What links do you need?
Click to expand...
Click to collapse
bazza500 said:
hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?
Click to expand...
Click to collapse
Here:
http://forum.xda-developers.com/showthread.php?t=1424997

Thanks nokiamodeln91
Will give it a go and report back :good:

Right tried Odin but it does not fond my phone.
I have reinstalled drivers via Kies
www.confused.com

bazza500 said:
hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?
Click to expand...
Click to collapse
Oops. How did I miss it...
Thanks @treacherous_hawk
---------- Post added at 05:12 PM ---------- Previous post was at 05:10 PM ----------
bazza500 said:
Right tried Odin but it does not fond my phone.
I have reinstalled drivers via Kies
www.confused.com
Click to expand...
Click to collapse
Once you have installed kies.. Go to task manager and kill all process of kies.
Then boot the phone in download mode. Then connect the USB cord.

nokiamodeln91 said:
Oops. How did I miss it...
Thanks @treacherous_hawk
---------- Post added at 05:12 PM ---------- Previous post was at 05:10 PM ----------
Once you have installed kies.. Go to task manager and kill all process of kies.
Then boot the phone in download mode. Then connect the USB cord.
Click to expand...
Click to collapse
oki doki

bazza500 said:
oki doki
Click to expand...
Click to collapse
nope still no computor recognises when I plug phone in but niether Keis or Odin finds it ?

OK.. Then download Philz jb kernel. Any will do. Download a custom rom like cm or any Samsung based tw rom. Place both on external sd card. (use a card reader).
Then boot into recovery mode. Then choose apply update from external storage, choose the Philz kernel. Flash it.
Power off the phone and boot into recovery mode again. You should see Philz cwm recovery.
Now choose install zip and flash the rom zip file. Wait for it to finish. Reboot.

nokiamodeln91 said:
OK.. Then download Philz jb kernel. Any will do. Download a custom rom like cm or any Samsung based tw rom. Place both on external sd card. (use a card reader).
Then boot into recovery mode. Then choose apply update from external storage, choose the Philz kernel. Flash it.
Power off the phone and boot into recovery mode again. You should see Philz cwm recovery.
Now choose install zip and flash the rom zip file. Wait for it to finish. Reboot.
Click to expand...
Click to collapse
Ok Thanks for all your help will try this and report back.:good:

nokiamodeln91 said:
Oops. How did I miss it...
Thanks @treacherous_hawk
---------- Post added at 05:12 PM ---------- Previous post was at 05:10 PM ----------
Once you have installed kies.. Go to task manager and kill all process of kies.
Then boot the phone in download mode. Then connect the USB cord.
Click to expand...
Click to collapse
Ok,
Tried 2 versions of PhilZ cwm and same problem as before :
signature length doesn't match EOCD marker
signature length doesn't match EOCD marker
signature verifacation failed
Any ideas guys ?

bazza500 said:
Ok,
Tried 2 versions of PhilZ cwm and same problem as before :
signature length doesn't match EOCD marker
signature length doesn't match EOCD marker
signature verifacation failed
Any ideas guys ?
Click to expand...
Click to collapse
SUCCESS !!!!!!!!!!
Well part success,I have eventually managed to get PhilZ cwm installed thanks guys.
Trouble is I cant get it to accept a rom :crying:
gonna try a different memory card.............

bazza500 said:
SUCCESS !!!!!!!!!!
Well part success,I have eventually managed to get PhilZ cwm installed thanks guys.
Trouble is I cant get it to accept a rom :crying:
Click to expand...
Click to collapse
after flashing philz kernel, reboot into recovery and if you did so, what is the error you are getting?

treacherous_hawk said:
after flashing philz kernel, reboot into recovery and if you did so, what is the error you are getting?
Click to expand...
Click to collapse
OK this is a screen shot of odin it goes no further that what it shows.
If I try to install a custom Rom from the sd card I get :
finding update package...
opening update package...
E:can't open /sdcard/pa_n7000-4.0-alpha-20131125.zip
(bad)
instalation aborted
Any thoughts ?

bazza500 said:
OK this is a screen shot of odin it goes no further that what it shows.
If I try to install a custom Rom from the sd card I get :
finding update package...
opening update package...
E:can't open /sdcard/pa_n7000-4.0-alpha-20131125.zip
(bad)
instalation aborted
Any thoughts ?
Click to expand...
Click to collapse
sorry forgot to mention tried 5 different roms now all for n7000 via goo.im

[Q] need help in slimkat rom

hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this

harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
what i normally do using philz recovery
1) wipe data ( complete wipe to install a new rom)
2) flash slimkat rom
3) flash slim gapps
4) as im having as c6902, i need to flash modules of c6902, hence, flash the modules provided in the monx thread in Xperia Z1 android development
5) flash superuser zip to gain root access later on
6) reboot

Hey
[/COLOR]
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.

Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
stoan123 said:
[/COLOR]
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Click to expand...
Click to collapse
Working. thanks bro
Sent from my z1 on slimkat rc2

a
jobangill99 said:
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
Working. thanks bro
Sent from my z1 on slimkat rc2
Click to expand...
Click to collapse
there're diferent between c6903 and c6902. i think that is modem
you can read more detail from thread

thanks a ton guys finally it worked by flashing modem and was able to use the rom:good:

[Q] Stuck in boot loop... Which stock firmware should I use?

Attempted to flash my first rom (dmodv6) and I got stuck in a boot loop... I wiped cache and all that to no avail.... Now, I'm simply attempting to flash back to stock firmware. The problem is upon visiting the sites with all the listed firmware, I have no clue which one I am supposed to choose. What PDA version number is the correct one? Can someone help me please?

AffectiveEffect said:
Attempted to flash my first rom (dmodv6) and I got stuck in a boot loop... I wiped cache and all that to no avail.... Now, I'm simply attempting to flash back to stock firmware. The problem is upon visiting the sites with all the listed firmware, I have no clue which one I am supposed to choose. What PDA version number is the correct one? Can someone help me please?
Click to expand...
Click to collapse
what device have you got? model? network provider? region?
load the latest
next time do a nandroid backup before loading a new ROM to make it easier to recover from a bootloop

efaustino84 said:
what device have you got? model? network provider? region?
load the latest
next time do a nandroid backup before loading a new ROM to make it easier to recover from a bootloop
Click to expand...
Click to collapse
an unlocked GT-i8190... not sure of the model... I use straight talk but it came with a t-mobile apn... and region is part of the problem... I'm from the USA but there's no USA or North America region firmware that I could find.
And I did a backup but not thru CWM (like I imagine I should have).... I used titanium backup...
I think the reason I probably ended up with a boot loop is because I placed the dmodv6 rom on the external sdcard and booted from there... I probably should have put it in the phone sd... whoops....
I read somewhere that region didn't really matter as long as it was the latest... Is this true?
Thanks.

AffectiveEffect said:
an unlocked GT-i8190... not sure of the model... I use straight talk but it came with a t-mobile apn... and region is part of the problem... I'm from the USA but there's no USA or North America region firmware that I could find.
And I did a backup but not thru CWM (like I imagine I should have).... I used titanium backup...
I think the reason I probably ended up with a boot loop is because I placed the dmodv6 rom on the external sdcard and booted from there... I probably should have put it in the phone sd... whoops....
I read somewhere that region didn't really matter as long as it was the latest... Is this true?
Thanks.
Click to expand...
Click to collapse
yup absolutely
providing you load the right model firmware it should be fine
you could also try one of the rooted firmwares in the custom ROM section

Oh, awesome! Maybe I'll try one of those.
Thanks! (I clicked the 'thanks' button for ya)

community is here to help each other get the most out of the S3 mini

So I attempted to flash the stock firmware but the same thing is happening... BOOT LOOP!
I'm at a loss... I don't know what to do from here. Any ideas?

What rom did you have before you tried dmod? If it was anything else but stock--based you will have to do a factory reset to get out of boot loop.
Sent through time and space from my s3mini/CM11

tys0n said:
What rom did you have before you tried dmod? If it was anything else but stock--based you will have to do a factory reset to get out of boot loop.
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
It was the stock jellybean 4.1.1... I've done the factory reset and cache wiping and such to no avail. It also gave me the boot loop when attempting to flash back to a stock firmware... but I just noticed it was for 4.1.2... I'm not sure if that would be an issue or not... but I just downloaded a rooted stock 4.1.1 firmware and am attempting to flash it now....
EDIT: Same deal... didn't work. Should I do format/ system? I've read lots of info today about boot loop problems but it seems most have it fixed via some of the options I've tried. I don't care if I lose all of my data or anything... I just want my phone to work again!

Now whenever I boot in cwm it asks me if I want to install an untrusted package... some sort of update.zip... Should I be booting into cwm after flashing the stock firmware and wiping anything? I was under the impression it would simply reboot and my phone would work if all went well. I'm just unsure about all of the steps.

AffectiveEffect said:
Now whenever I boot in cwm it asks me if I want to install an untrusted package... some sort of update.zip... Should I be booting into cwm after flashing the stock firmware and wiping anything? I was under the impression it would simply reboot and my phone would work if all went well. I'm just unsure about all of the steps.
Click to expand...
Click to collapse
Flash stock recovery before you flash firmware in Odin. Otherwise the CSC zip will fail.
Sent through time and space from my s3mini/CM11

tys0n said:
Flash stock recovery before you flash firmware in Odin. Otherwise the CSC zip will fail.
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
Okay... Downloading it now! Should I use the same PDA tab in Odin?

AffectiveEffect said:
Okay... Downloading it now! Should I use the same PDA tab in Odin?
Click to expand...
Click to collapse
Yes put it in PDA.
Sent through time and space from my s3mini/CM11

Everything looks good on Odin until I go to reboot... CWM is still the recovery. I remember having a hell of a time flashing CWM... It kept booting to stock recovery and then, one time, it worked. I've tried over and over to get it back to stock recovery but it's not happening.
I'll keep trying, though. What is this PIT thing? I hear it's a last resort... I'm starting to think it may be my only option unless you good people have any more ideas.
I appreciate it, guys!

AffectiveEffect said:
Everything looks good on Odin until I go to reboot... CWM is still the recovery. I remember having a hell of a time flashing CWM... It kept booting to stock recovery and then, one time, it worked. I've tried over and over to get it back to stock recovery but it's not happening.
I'll keep trying, though. What is this PIT thing? I hear it's a last resort... I'm starting to think it may be my only option unless you good people have any more ideas.
I appreciate it, guys!
Click to expand...
Click to collapse
It means you are still able to access the recovery? If yes then install a other ROM from external SD card. I think this will help you : remove your external SD card (if you have one) put it in a other phone or some else download an other ROM, move it to your external SD card, put the SD card back to your s3 mini and install it via CWM under the section "install ZIP from external sd".
Do a nandroid backup before and don't forget to wipe factory data and cache

xXPR0T0TYPEXx said:
It means you are still able to access the recovery? If yes then install a other ROM from external SD card. I think this will help you : remove your external SD card (if you have one) put it in a other phone or some else download an other ROM, move it to your external SD card, put the SD card back to your s3 mini and install it via CWM under the section "install ZIP from external sd".
Do a nandroid backup before and don't forget to wipe factory data and cache
Click to expand...
Click to collapse
Yep... I can get into CWM just fine. And yes, I have an external SD card. I'll try it out and check back. Thanks, xXPR0T0TYPEXx!

AffectiveEffect said:
Yep... I can get into CWM just fine. And yes, I have an external SD card. I'll try it out and check back. Thanks, xXPR0T0TYPEXx!
Click to expand...
Click to collapse
Havet you tried to flash stock recovery thru cwm?
Sent through time and space from my s3mini/CM11
---------- Post added at 08:15 PM ---------- Previous post was at 08:11 PM ----------
What version of Odin do you use?
Sent through time and space from my s3mini/CM11

tys0n said:
Havet you tried to flash stock recovery thru cwm?
Sent through time and space from my s3mini/CM11
---------- Post added at 08:15 PM ---------- Previous post was at 08:11 PM ----------
What version of Odin do you use?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
No, I've been trying to flash stock recovery through Odin.... You can do it through CWM? And I have 3.07 and 3.09... I've tried them both.

AffectiveEffect said:
Yep... I can get into CWM just fine. And yes, I have an external SD card. I'll try it out and check back. Thanks, xXPR0T0TYPEXx!
Click to expand...
Click to collapse
Good and don't forget if you flash a new ROM and wiped factory and cache then do the first boot take often 5-10mins or longer.

tys0n said:
Havet you tried to flash stock recovery thru cwm?
Sent through time and space from my s3mini/CM11
---------- Post added at 08:15 PM ---------- Previous post was at 08:11 PM ----------
What version of Odin do you use?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
Never mind... I know what you mean. But that's how I ran into this boot loop, initially... I tried to flash dmodv6 via CWM. Everything was successful it said, but it caused the boot loop.

[Q] Corrupted Download mode

While installing a coustom rom my phone(Samsung Galaxy Ace GTs-5830) had stucked. Then I have restored my phone using CWM backup to Pacman jellybean custom rom. After that odin is unable to detect my phone, i have updated samsung driver on pc. Even any custom rom are unable to treat my device as "Galaxy ace 5830".I have tried to install stock recovery, but same thing don't detecting my phone and installation is being aborted.
What can i do now?
Help me plz, thanks in advance.

Check the usb cable
Sent from my ST25i using Tapatalk

Don't flash stock recovery(I guess there isn't any ). So, try flashing stock firmware via Odin. Use correct name of ops file : COOPER_v1.0.ops & Odin straightaway displays the model name in its title bar even if the phone isn't physically connected to PC via USB cable.
Use Odin v4.42 atleast.
& pls. never flash stock firmware directly over any jellybean rom. First flash any stable CM7 rom & then u r good to go
Hope this helps...!!

nazmul99 said:
While installing a coustom rom my phone(Samsung Galaxy Ace GTs-5830) had stucked. Then I have restored my phone using CWM backup to Pacman jellybean custom rom. After that odin is unable to detect my phone, i have updated samsung driver on pc. Even any custom rom are unable to treat my device as "Galaxy ace 5830".I have tried to install stock recovery, but same thing don't detecting my phone and installation is being aborted.
What can i do now?
Help me plz, thanks in advance.
Click to expand...
Click to collapse
When your phone is not detected by odin, it's usually the driver's. Just follow this link,
How to Install Stock ROM on Galaxy Ace Using Odin [GT-S5830]
Go to the "Preparation" section and download all the necessary files. Re-install the drivers again and check if odin detects it. Do post the result. Hope I Helped

I think Cable is OK, because mass storage mode is working with that cable.But when in download mode, PC saying Mulfunctioned device.
I have put ops file, showing my model number. But whenever I click on start. Its saying to connect the device first.

I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"

nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Are you able to go to Recovery Mode? If yes, then try installing any CM7 custom rom. Make sure to do "Wipe data/ factory reset", "Wipe cache partition", Mounts & Storage> Format /system, Advanced> "Wipe Dalvik cache" before you flash a custom rom. Do post the result. Hope I Helped
---------- Post added at 03:35 PM ---------- Previous post was at 03:24 PM ----------
nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Is the pacman rom working normally?

nazmul99 said:
I think problem is not in my PC driver.
Because custom ROM installations are also aborted, showing error about device is not "5830"
Click to expand...
Click to collapse
Can u show us the error screen?:sly:

Unable to install CM7. But CM9(ICS) has been installed. Pacman rom was not directly installed, restored from nandroid backup. Yes its working perfectly.

nazmul99 said:
Unable to install CM7. But CM11(ICS) has been installed. Pacman rom was not directly installed, restored from nandroid backup. Yes its working perfectly.
Click to expand...
Click to collapse
Since the nandroid backup is working perfectly, try using the mobile odin for Samsung Galaxy Ace. Install it as a normal apk file and choose the required stock firmware from your SD Card. See if you flash the stock rom back. Here is the link,
Mobile ODIN Lite v3.57 (GT-S5830 Support) - Flash Firmware on your device
Do post the result. Hope i Helped

mahithm said:
Since the nandroid backup is working perfectly, try using the mobile odin for Samsung Galaxy Ace. Install it as a normal apk file and choose the required stock firmware from your SD Card. See if you flash the stock rom back. Here is the link,
Mobile ODIN Lite v3.57 (GT-S5830 Support) - Flash Firmware on your device
Do post the result. Hope i Helped
Click to expand...
Click to collapse
Actually I'm out of my home now. Unable to use my laptop. I will post result of your procedure ASAP.
Thank You.

nazmul99 said:
Actually I'm out of my home now. Unable to use my laptop. I will post result of your procedure ASAP.
Thank You.
Click to expand...
Click to collapse
No problem I hope this works for you :fingers-crossed:

Thank You
Thank you everyone for your kind support.
Yes I've successfully flashed the official firmware.
It's become possible through the Mobile Odin method.
:fingers-crossed: :laugh: :good:

nazmul99 said:
Thank you everyone for your kind support.
Yes I've successfully flashed the official firmware.
It's become possible through the Mobile Odin method.
:fingers-crossed: :laugh: :good:
Click to expand...
Click to collapse
Glad to hear it worked buddy

stuck to teamwin logo

I've installed novafusion maclaws cm12 5.1.1 through ODIN folowing steps on his site, and I wanted to do factory reset from menu in phone but my phone got stuck in to blue-black stripes with "teamwin", it is just blinking screen every 2-3 seconds...I've tried few more times to install again CM12 but without success, every time it is the same I can get out of "teamwin2 screen, any solution for this problem? Need phone, only that I got now

Reflash the stock rom via odin
Sent from my GT-S7390 using XDA Forums

didn't help I've downloaded stock rom but when I import it in ODIN via PDA I get notification that md5 file is invalid or something like that.....one more thing md5 file that I downloaded is ending with .tar I added after that .md5 is this ok? It shows me that .tar is winrar archive which when I unzip get some files but not one with .md5 at the end

Somehow after zillion tries I installed CM12 and now the problem is how to install gapps ? When I get in recovery mode I got it like this (first photo on that site):
http://www.digitaltrends.com/mobile/use-recovery-mode-android/
I downloaded gaapps and copied it to internal storage of phone, what should I do next, how to access and install gapps?

gorantz said:
Somehow after zillion tries I installed CM12 and now the problem is how to install gapps ? When I get in recovery mode I got it like this (first photo on that site):
http://www.digitaltrends.com/mobile/use-recovery-mode-android/
I downloaded gaapps and copied it to internal storage of phone, what should I do next, how to access and install gapps?
Click to expand...
Click to collapse
That's a stock recovery, u need to flash the custom recovery and then flash the gapps from SD card or internal.
P.S.: u need to flash the gapps and rom at the same time. If u do it separately then u will be in big problem(worst nightmares).
tra_dax
---------- Post added at 08:31 AM ---------- Previous post was at 07:54 AM ----------
U can get the twrp.tar file from here:
https://dl.twrp.me/golden/twrp-2.8.3.0-golden.tar.html?_e_pi_=7,PAGE_ID10,8537289601
But I m not sure whether this is the latest version or not so do some research and then proceed.
tra_dax

I'll try this tonight, and I'll do it at same time, tnx

Thank you it worked!!! But I installed CM11 from novafusion stable version instead of CM12.1.....I've red that battery life on CM11 is better and it is wt less bugs...any other CM I shoud try?

gorantz said:
Thank you it worked!!! But I installed CM11 from novafusion stable version instead of CM12.1.....I've red that battery life on CM11 is better and it is wt less bugs...any other CM I shoud try?
Click to expand...
Click to collapse
U can try any cm ROM that has made for ur device. U just need to download the respective recovery for that. For the battery life u can download a custom kernel respective to the ROM. Or try any other ROM.
tra_dax

any recommendation ? what are you using tra_dax?

gorantz said:
any recommendation ? what are you using tra_dax?
Click to expand...
Click to collapse
I m using pac-man ROM.
Here u can find the list of kernels with their specifications:
http://forum.xda-developers.com/gal...ernel-collection-kernels-roms-s3mini-t2810435.
It would be better if try out the overclocked kernels.
Remember flash the kernel which belongs to the respective android version. Don't flash lollipop kernel to kitkat ROM or vice-versa. If u need help, @Android-Andi can help u in this case as he too has the same device. U can get the pacman ROM for ur device easily (made by novafusion).???
tra_dax