Related
My note is 2.3.6 , N7000LA2, now kernel is XXKKA,
I am not an expert, so I rooted in a wrong way then causing yellow triangle, But i removed the triangle finally
Actually I want to flash andriod 4.0 / other ICS theme rom, what procedure I should do now??
1. Is my note not a correct kernel now??
(I feel that the battery consumed faster than before, & not as smooth as than before getting yellow triangle)
2. Can I use a regular way (using odin to root back the right kernel & flash rom)?
3. my cwm mgr is not working correctly, how should i do??
Please advise ..
Many Many many thanks!
Do you have root working now?
If yes, update CWM, you can get proper kernel from my thread 'How to Root'(c signature for link)
after that you can update to any ROM with CWM
dr.ketan said:
Do you have root working now?
If yes, update CWM, you can get proper kernel from my thread 'How to Root'(c signature for link)
after that you can update to any ROM with CWM
Click to expand...
Click to collapse
Thank you so much!
My colleague's fd finally helped me flash a new kernel ([email protected]#3)
But I have some questions
1) which version is this kernel??
2) can i keep this kernel , then flash another 4.0 rom??
3) if i dont want to use odin (pc version) to flash, can i use mobile odin or cwm to flash?
what exact procedure i have to do?
please advise..
thanks !!!
this is abyssnote kernel, universal
you can use CWM to update 4.0 ROM, put file on SD card n boot in recovery.
select flash zip file, point to ROM file, confirm it by saying ye, done.
if get bootloop, wipe cache, wipe data (it will wipe off data so take backup b4 proceeding)
dr.ketan , really thanks for your prompt reply
but I am now in another bad situation..
I flashed something wrong & the note keep rebooting, & then now cannot get in the system , just stop at the N7000 welcome page,
But i can go to CWM recovery
get into recovery, wipe cache, wipe delvic cache
still not works wipe data (you will lose data) This is routine for 4.0 based ROM
And wat u mean by 'something wrong', you are not sure it was custom ROM file?
If nothing works then go to download mode n flash older Stock ROM with PC odin
dr.ketan said:
get into recovery, wipe cache, wipe delvic cache
still not works wipe data (you will lose data) This is routine for 4.0 based ROM
And wat u mean by 'something wrong', you are not sure it was custom ROM file?
If nothing works then go to download mode n flash older Stock ROM with PC odin
Click to expand...
Click to collapse
Thanks dr.ketan!
But it is not 4.0 based rom yet, just a 2.3.6, official rom (before "broke" )
So, should i still follow your method to do??
or should i get into recovery, try to flash the stock rom N7000OZSLA2 ?
I think i flashed the wrong version:
http://forum.xda-developers.com/showthread.php?t=1415567
Now I find I cant flash any rom by CWM....
"installation aborted"
Have u wipe data ? If not do it first thn flash stock rom using pc odin
Sent from my GT-N7000 using xda premium
thanks ketan!
I really didnt wipe data, but finally flash stock rom by pc odin
done by following your post , thats really useful!
I flash hk version LA2, but cant root
& then flash KJ1 Factoryfs, got the CWM
lastly I flash the abyssnote kernel
so is my SGN now contains a KJ1 rom?
can i flash back to LA2 without losing the root?
or is there any big differences between KJ1 & LA2??
& one more, I want to add the battery %, where can i find/search the suitable one for my SGN
Thanks!
s42715 said:
thanks ketan!
I really didnt wipe data, but finally flash stock rom by pc odin
done by following your post , thats really useful!
I flash hk version LA2, but cant root
& then flash KJ1 Factoryfs, got the CWM
lastly I flash the abyssnote kernel
so is my SGN now contains a KJ1 rom?
can i flash back to LA2 without losing the root?
or is there any big differences between KJ1 & LA2??
& one more, I want to add the battery %, where can i find/search the suitable one for my SGN
Thanks!
Click to expand...
Click to collapse
Now you can flash to la2 with CWM n keep cf-root when ask
Or use mobile odin n enable everroot option in mobile odin n flash
Sent from my GT-N7000 using xda premium
Thank you so much ketan!
I got LA2 n keep the cf-root now!
One thing I want to ask :
Is any roms to flash can follow the below procedure?
or which situations cannot follow this procedure:
Thanks.
2. CWM recovery (you need Root + CWM on existing ROM. Get )
Download the ROM. Extract it.
Create folder /sdcard/external_sd/firmware (thats folder "firmware" (lowercase) on your external SD card) (see image)
Click to expand...
Click to collapse
This is for Stock ROM only
If you want to flash custom rom, u have to select flash zip option, not 'flash stock firmware' option
hey guys,, i seem to have stuffed the recovery of my phone,, i stupidly installed cwm on my phone without root, but when i reflashed with odin the stock recovery works but when i install cwm, it doesnt go into recovery
CWM doesn't require root!
Try to reflash a stock rom. Not the one package file but the whole rom.
---------------XDA Premium--------------
Don't be a noob. Be a newbie..!!
Details here.
___________________________________
i have tried, once i flash cwm it doesnt boot into recovery,, ill try redownload and see if that helps
finally got it to work, i found a odin flashable cwm and it now works
ok now that i have cwm semi working on my phone, its now very difficult install roms, the only rom i can get to work on my phone now is stock,,, i now cannot flash cwm from recovery otherwise i get cwm bootloop only flashing by odin works, all custom roms get bootloop no matter how many times i flash and wipe data/cache,, i think my phone is stuffed
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
dxppxd said:
You sure you're installing cwm and roms for your device? What model ace do you have? (Not the i model right?)
Click to expand...
Click to collapse
yeah mate im sure, i know what im doing, but it just doesnt seem to work anymore lol,, i have the T model
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
JDMBrooksy said:
Make sure it is Just the "S5830" Any other then your in the wrong thread.
Tbh The order i do it, Flash the latest stable stock rom Via odin, Flash update {Any Kernel} (On phone) Then Reboot into CWM To flash a rom.
Click to expand...
Click to collapse
yes it is, im not a noobie,, done that too,, im trying to flash cm9 b10 now but its stuck at samsung, and yes i have done data wipe and cache wipe
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
JDMBrooksy said:
Only way i can think of is:
Flash new software with Odin: http://www.4shared.com/rar/FCyxijg8/odin_s5830_package.html
Then flashing "CWMRecovery" {AttacthMent} as an update through stock recovery as an update
Then reboot into CWM Recovery To wipe data Etc Etc, Then flash what ever ROM you want..
please more info man really not helping.
Click to expand...
Click to collapse
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
winxuser said:
ok ill try to remember what i did to stuff the phone,, ,i flashed my phone with s5830xwkt7 the rooted and flashed cwm 5,, i went to flash a custom rom but chose the wrong one and took the battery out,,, booted into cwm and did a full wipe and flashed the custom rom,, tested the rom and went back to stock rom, done root and installed cwm 5 again then went to reboot back to cwm for flash oc kernel and it started to bootloop after the samsung logo,,, its all fixed for now but im sure it will happen again
Click to expand...
Click to collapse
Flash "Root" After Flashing "CWM" See if that helps? if not please try the order i have gave, or try looking for different resources.
The Sources i have given you are working fine for my Ace.
Hi, I'm stuck with installing new rom, so I hope, that you'll help me.
There are steps what I've done:
- followed THIS topic and ROOT the device with ODIN and CF-Root 4.4 file.
- OKAY, I'm rooted, so let's flash the new ROM
- entered in Clockworkmod Recovery and format EVERYTHING ( /data, /system, /cache, /sdcard etc.... just everything) for clear system
- next I load package with ROM and than INSTALLL
and here is the most important part
- when installed ROM gets something like bootloop but with restart - ROM is loading and after about 40 sec its RESTART
- and the same thing over and over again - restart ->loading->restart.... System never start up correctly to the end
- then when I saw that it does not work, I tried go into the CWM, but there was no CWM (!!!) - it was erased (by installing new ROM maybe???)
- so I must flash (old and stock) ROM via ODIN and again root device with CF-Root (with CWM) - that was only functional rom, what I was able to run, and again did this procedure
I tried this way, perhaps with millions of different ROM and EVERY was stucked (restart) while loading.
I think there are some non-deleted files in device, which should be erased (and which cannot be erased by CWM) for clear start of new installed ROM, what do you think?
Would someone please help me? I don't want old Gingerbread with Kies
Thanks for every responce!
Does it say in the thread that you have to flash a custom kernel?? Give.me the link for the thread so I can make sure that you've done everything right
Sent from ma 5assak
there is a link, but in hypertext THIS, i repost it in full text:
http://forum.xda-developers.com/showthread.php?t=788108
I think, when I've root and CWM, there is no problem and install a new rom will be very least, so not as it seems
Dude this is a kernel not a rom what's the matter with you??:what:
Sent from ma 5assak
please read all my topic - i flash this kernel only for clockworkmod recovery
through CWM I can flash any other rom
through ODIN only stock - cant find any ICS or JB rom which I can flash via ODIN (.tar file)
What variant of i9000 do you have? Are you sure that the rom you are trying to flash is made exactly for your variant?
EDIT: Try Darky ROM, they have an ODIN flashable version called "Resurrection Edition" or something.
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Samsung Galaxy S I9000, i'm sure 100%. NOT I9001, NOT Samsung Galaxy S2. Tried many roms from Development section for I9000, tried from get.cm etc... always the same result bootloop with restart
donhashem.dh said:
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Click to expand...
Click to collapse
OK. For example: this rom cm-9.0.0-galaxysmtd and cm-9-20120815-NIGHTLY-galaxysmtd from http://get.cm/?device=galaxysmtd
Or this one last ([ALPHA][ROM][4.1.1] CyanogenMod 10 for Samsung Galaxy S) http://forum.xda-developers.com/showthread.php?t=1778526 and 20120808 build.
and [ROM][PORT][ANDROID 4.1.1][BETA] TAJB: Jelly Bean port for Galaxy S V7.1 http://forum.xda-developers.com/showthread.php?t=1747042
and this too [4.0.4][ROM] Dark Knight 5.5 [27/4/2012] http://forum.xda-developers.com/showthread.php?t=1510940
and many more....
realy unhappy from this
Nikishek said:
Samsung Galaxy S I9000, i'm sure 100%t
Click to expand...
Click to collapse
I meant I9000 or I9000B or I9000M or I9000T there's a difference between them
I9000 only, checked it several times
Ok so you can flash Darky Rom Resurrection Edition through ODIN with no problem. Its GingerBread if i remember correctly, but it should give you a recovery mode and fully operating phone. From this point you can flash whatever you want.
....And there is one more important thing:
When I have a stock kernel and stock rom from Samsung, cant get into recovery mode - VOLUME UP and POWER non functional. Only when I type: "adb reboot recovery" in terminal.
Just after when I flash a new pre-rooted kernel with CWM, VOLUPE UP and POWER is now functional
k4Z3666: OK, I try and give you an echo I think, when I format everything in CWM, there will be no sign of the earlier system and ALL WILL BE CLEAR
Nikishek said:
I9000 only, checked it several times
Click to expand...
Click to collapse
ok, flashing ICS, may need to be done twice, as first flash may bootloop, IF you want to return to stock to get out of this mess, since you are not sure as to where you are now, due to flashing many roms, use any kit from My Android Collections, link below to get you to a booting ROM, than add a kernel with CWM (use EZbaze package with kernels)
that's helped me too thank you
Sent from my GT-I9000 using xda app-developers app
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
problitz said:
hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
Click to expand...
Click to collapse
First upgrade your device to Gingerbread using Odin, follow this guide
hubix's guide
Then root your device and install CWM (custom recovery) in order to flash custom roms, doing backups, flash mods ... here you'll find all
Usefull Thread with lots of info and FAQ
Finally choose the rom you want and follow the dev's instructions to flash the selected rom
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
problitz said:
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
Click to expand...
Click to collapse
The latest fw it's from Vietnam?? umm
There's no problem, but I suggest you to flash an European fw in order to avoid signal/coverage troubles because of each fw includes a modem from a different area. For me the Spanish KTM is the best
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
problitz said:
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
Click to expand...
Click to collapse
Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
You can find all the necessary details for flashing as well as all the firmwares in this link. If your PC cannot recognize the phone, its usually the drivers. Once installed, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace (just install these zip from the recovery mode),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
You can use the single firmware installation. No need to download files like boot, pda, etc separately. Also you can download the firmware near to your region. Hope I Helped
thx that help a lot just missing the firmware for portugal to be perfect
problitz said:
thx that help a lot just missing the firmware for portugal to be perfect
Click to expand...
Click to collapse
Glad I could help
SamMobile
problitz said:
Just missing the firmware for Portugal to be perfect
Click to expand...
Click to collapse
Download It From SamMobile.com :laugh::victory::highfive:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
problitz said:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
Click to expand...
Click to collapse
Before you do any of these things, make sure to backup you apps. Go to CWM and do "Wipe data/ factory reset" and "Wipe Cache partition". Also go to Mount and Storage> Format /system. Finally Advanced> "Wipe Dalvik Cache" and "Wipe Battery Stat". Now reinstall the rom again. It might solve the issue. As for the stable custom rom, you can always go with CM 7 i.e. Android 2.3.7 based roms. CM 7 based roms are much stable than CM 9, CM 10 and CM 11 roms. As per xda rules, I cannot suggest you the best rom. But here is list of all roms for our Ace. You can flash this yourself to decide which is the best. Here is the link,
Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST
Hope I Helped
i did that but still have the same problem i get a light blue screen and black and it just restarts i really liked this rom
i will try other thx anyway for the rom list
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
problitz said:
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
Click to expand...
Click to collapse
Once you have installed the stock rom, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur).
i did but still same problem
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
problitz said:
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
Click to expand...
Click to collapse
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i think i have done that already but im not sure my phone is charging i will download another stock rom to try it then i will post the results thx
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
problitz said:
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
Click to expand...
Click to collapse
Might be the problem with the custom rom. Try installing some other custom rom and see if the problem persists. Do post the result. Hope I Helped