Database Develop

[q] moto x brick bootloader help

Hello! I'm desperate, yesterday did unlock the bootloader moto X, I was with 4.4.4 Rom, then put a custom rom based on stock 4.4.2 and there asked me to update, I put the recovery of the stock to be able to upgrade and not get in infinite boot, only to my surprise when done updating the phone did not turn over, was in the bootloader screen and will not go anywhere when I try to get into some of the options appears the name "failed" .. I am in despair. The following images: HELP ME PLEASE
thanks guys

Can you get into fastboot mode to flash your carriers 4.4.4? If not maybe this can help.http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good luck! You are in a bad situation.

managed
Travisdroidx2 said:
Can you get into fastboot mode to flash your carriers 4.4.4? If not maybe this can help.http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good luck! You are in a bad situation.
Click to expand...
Click to collapse
Managed, solved the problem by installing the Stock Rom 4.4.4. Thanks: D

[Q] Locked bootloader, boot up failed.

Hey, guys.
I have a Moto X Brazil Retail version.
I unlocked the bootloader, but never installed a custom recovery or rom, I was just curious.
Today, I flashed kitkat 4.4.2 and everything was going fine until I received the notification to update to version to 4.4.3.
After installing the 4.4.3 update, the moto x would just boot up to the flashboot screen, with LOCKED bootloader T_T.
I can't hard reset using any means I know. Can you help me?
Thanks.
(I'm on a mac)

leocanela said:
Hey, guys.
I have a Moto X Brazil Retail version.
I unlocked the bootloader, but never installed a custom recovery or rom, I was just curious.
Today, I flashed kitkat 4.4.2 and everything was going fine until I received the notification to update to version to 4.4.3.
After installing the 4.4.3 update, the moto x would just boot up to the flashboot screen, with LOCKED bootloader T_T.
I can't hard reset using any means I know. Can you help me?
Thanks.
(I'm on a mac)
Click to expand...
Click to collapse
what do u mean that u have unlocked the bootloader and now u have bl locked??
from fastboot choose Factory once and then if u get another time fastmode choose another time Factory.
if doesn t work boot into recovery and wipe cache.

He obviously downgraded. He had to have been on 4.4.3 (or higher), unlocked, flashed a custom ROM, decided to go back to stock, and flashed 4.4.2. (downgrade)
That pretty much sum it up?
Everybody PLEASE READ the warnings that downgrade = brick....

Mobile Radio Activy Draining Battery

Hi all,
I know it's a known issue on Android. But my question is another.
I've a Moto Maxx from Brasil with locked bootloader. Is there anyway for me to maybe downgrade and afterwars upgrade again ?
I don't know if this can help with my problem, but maybe worth the risk. My battery is not lasting one day with normal use.

There's a way, but you need to unlock the bootloader.
You'll be re-flashing all of Kitkat EXCEPT for gpt.bin. (That part cannot be downgraded.) You will then have KitKat back. You can also then upgrade back to Lollipop.
But if you mess up the flash, you can brick your phone if the bootloader is not unlocked.
IF your bootloader is UNLOCKED, then you just go back into recovery and re-flash again. Everything can be fixed if your bootloader is unlocked. If you try flashing with a locked bootloader, it's much harder to fix mistakes, if they can be fixed at all.
Go here and read. Be sure to thank @Jaocagomez for writing the tutorial...
[Tutorial] How to Flash Different Official Firmware
http://forum.xda-developers.com/droid-turbo/help/tutorial-how-to-flash-official-firmware-t3074724
Question: Can i go back to kitkat if i flashed the Mexico or Brasil Lollipop OTA???
Answer: Yes you can flash back to kitkat without risk of brick if you flashed the mexican or brasil OTA using the method of this thread.
Click to expand...
Click to collapse

Moto G 2nd Gen -{ XT1068 }- (Hard Bricked BoatLoader ) !

Hi .
Downgrading From 6 to 5.0.1 worked ,
upgrading to 5.1 caused a hard brick BoatLader .
Customer Service Wont Fix cause my phone 1 month out of warranty , So. i go moto G forume Website and they said ( Thread Closed )
I belive They Never Have Planed to fix them phone becuase the only solution giving now is replacing MotherBoard ~! ..
idk why motorola using this method while all other companies never used the same way ! ..
For Now , Bye Bye Motorola . i'll switch to Samsung Now Since Samsung Never Have This Issue .
i hope someone who Cares here From our devlopers to help people out to fix this issue . i know unlocking BoatLoader is somehting we agreed for but doesn't mean we put our phone on Trash .
Thanks .
​

you took the words right out of my mouth. go **** the MOTO....

Romiui said:
Customer Service Wont Fix cause my phone 1 month out of warranty , So. i go moto G forume Website and they said ( Thread Closed )​
Click to expand...
Click to collapse
Welcome to the fast growing hard brick club. You can do only one thing, never buy a motorola product again. ​

zman01 said:
Welcome to the fast growing hard brick club. You can do only one thing, never buy a motorola product again.
Click to expand...
Click to collapse
Now I think that I am on the way to hardbrick my moto xt1068. cause, I checked the bootloader version everytime I flashed, first I was on cm12.1 [BL v48.82], so I flashed the stock 5.0.2 with stagefright in order to update to indian MM [Then BL was v48.83], now when I updated to Indian MM [BL was on v48.86].
But I again wanted to go on cm, so flashed the TWRP, then flashed xperiaZ5G rom[Android v5.1.1], and checked the BL [was on same v48.86 ].
Now i wanna know that if flash stock 5.0.2 on v48.86 BL will that hardbrick?
and if is there any failproof method to flash LP roms or stock LP without causing hardbrick, what're those?
Thank You.
- ArtRahul

ArtRahul said:
Now I think that I am on the way to hardbrick my moto xt1068. cause, I checked the bootloader version everytime I flashed, first I was on cm12.1 [BL v48.82], so I flashed the stock 5.0.2 with stagefright in order to update to indian MM [Then BL was v48.83], now when I updated to Indian MM [BL was on v48.86].
But I again wanted to go on cm, so flashed the TWRP, then flashed xperiaZ5G rom[Android v5.1.1], and checked the BL [was on same v48.86 ].
Now i wanna know that if flash stock 5.0.2 on v48.86 BL will that hardbrick?
and if is there any failproof method to flash LP roms or stock LP without causing hardbrick, what're those?
Thank You.
- ArtRahul
Click to expand...
Click to collapse
Hi
Just make sure you're not downgrading your bootloader.. Don't include gpt.img and motoboot.img while flashing the 5.0.2. And after that never install update via OTA.

zman01 said:
Hi
Just make sure you're not downgrading your bootloader.. Don't include gpt.img and motoboot.img while flashing the 5.0.2. And after that never install update via OTA.
Click to expand...
Click to collapse
So if something goes wrong, I can still flash stock, but excluding gpt.bin and motoboot.img (will that work?)
and I can still flash custom recoveries, roms, etc. right?

ArtRahul said:
So if something goes wrong, I can still flash stock, but excluding gpt.bin and motoboot.img (will that work?)
and I can still flash custom recoveries, roms, etc. right?
Click to expand...
Click to collapse
Yep, just make sure you're not downgrading your bootloader and don't update your phone via OTA and you'll be fine.

zman01 said:
Yep, just make sure you're not downgrading your bootloader and don't update your phone via OTA and you'll be fine.
Click to expand...
Click to collapse
my current bootloader is 48.86 i used xt1069 's marshmallow previously
I FLASHED XT1068_TITAN_RETAILDSDS_5.0.2_LXB22.99-16.3_Easy_Installer.zip ON BOOTLOADER 48.86 VIA FASTBOOT IT GIVES ME MSG IN PINK ( version downgrade for _gpt and version downgrade for tz) and rest is worked fine it successfully booted into the stock 5.0.2 after that i updated soak test update of 6.0 by coping blurred version into sd card and checking it by going into settings >about phones >system updates
so not faced any problem as of now i m sure what i done i have a video proof also that i flashed (XT1068_TITAN_RETAILDSDS_5.0.2_LXB22.99-16.3_Easy_Installer.zip ON BOOTLOADER 48.86)

Exactly Same with me....
:crying::crying::crying:
Romiui said:
Hi .
Downgrading From 6 to 5.0.1 worked ,
upgrading to 5.1 caused a hard brick BoatLader .
Customer Service Wont Fix cause my phone 1 month out of warranty , So. i go moto G forume Website and they said ( Thread Closed )
I belive They Never Have Planed to fix them phone becuase the only solution giving now is replacing MotherBoard ~! ..
idk why motorola using this method while all other companies never used the same way ! ..
For Now , Bye Bye Motorola . i'll switch to Samsung Now Since Samsung Never Have This Issue .
i hope someone who Cares here From our devlopers to help people out to fix this issue . i know unlocking BoatLoader is somehting we agreed for but doesn't mean we put our phone on Trash .
Thanks .
​
Click to expand...
Click to collapse
I will never prefer MOTO in my life ever,,,,..... Just F*** Off Moto...
Moto is just a MOney oriented company...thats y they put so much restrictions on its devices....that even official OTA update Hard Bricked the phone..... Unbelievable...

[HELP] Moto X XT1058 AT&T fully bricked! I can't do anything!

So, as the title says, I had a Moto X XT1058 from AT&T.
I updated a long time ago to Lollipop and the phone worked perfectly fine until yesterday, when suddenly shutted down and when I restarted, got stuck on M logo.
I restarted to bootloader(?) pressing power off and vol down buttons.
The version that shows me is 30.BE
The device wasn't unlocked or rooted, because I was happy with the stock ROM, so it says Device is LOCKED ans Status Code 0.
I tried every option on this menu and everyone says (in red):
"No valid PIV block in SP for system
piv validation failed (system)
Boot up failed"
I tryed with abd, fastboot, mfastboot and RSDLite to flash gpt.bin and motoboot.img and every time I do it I get a error, and the operation fails.
For what I've read in tooooooo many posts, it's probably death, but I resist to this idea, so I came here to ask for advice.
THE PHONE IS NOT IN WARRANTY ANY MORE.
Thanks in advance and sorry for my english (not my native language).

why dont you try twrp recovery ?
just flash it

fadyrox said:
why dont you try twrp recovery ?
just flash it
Click to expand...
Click to collapse
Can I do it if my phone isn't rooted? The bootloader it's locked!

Flash full stock att 5.1 rom, it will be fine.

Salik Iqbal said:
Flash full stock att 5.1 rom, it will be fine.
Click to expand...
Click to collapse
Flashing via fastboot mode will be okay !
do search here you will get details !

fadyrox said:
Flashing via fastboot mode will be okay !
do search here you will get details !
Click to expand...
Click to collapse
But I never flashed any ROM on this phone. I got Lollipop from a OTA update. My phone was stock. Never rooted, never unlock bootloader. I didn't find any tutorial to do it with this characteristics.
And it's an AT&T xt1058

MatiCepe said:
But I never flashed any ROM on this phone. I got Lollipop from a OTA update. My phone was stock. Never rooted, never unlock bootloader. I didn't find any tutorial to do it with this characteristics.
And it's an AT&T xt1058
Click to expand...
Click to collapse
first you need to unlock your bootloader .. otherwise you wont be able to recover your device
Please do a search regarding unlocking bootloader !

fadyrox said:
first you need to unlock your bootloader .. otherwise you wont be able to recover your device
Please do a search regarding unlocking bootloader !
Click to expand...
Click to collapse
The bootloader of the XT1058 from AT&T is'nt unlockable.... That's the big trouble. I've read that it can be done if it's no 4.2.2, but not if the version is newer.

MatiCepe said:
The bootloader of the XT1058 from AT&T is'nt unlockable.... That's the big trouble. I've read that it can be done if it's no 4.2.2, but not if the version is newer.
Click to expand...
Click to collapse
Download rsd lite for windows, get latest stock rom for att, reboot your phone into fastboot, flash stock rom and you are done.

Salik Iqbal said:
Download rsd lite for windows, get latest stock rom for att, reboot your phone into fastboot, flash stock rom and you are done.
Click to expand...
Click to collapse
I searched and the lastone is ATT_XT1058_5.1.0_LPA23.12-21.7_cid1_CFC.xml.zip. I try to flash it on my phone via RSD and the process showsme this error:
Failed flashing process. 4/18 flash motoboot "motoboot.img" -> Phone returned FAIL.

MatiCepe said:
I searched and the lastone is ATT_XT1058_5.1.0_LPA23.12-21.7_cid1_CFC.xml.zip. I try to flash it on my phone via RSD and the process showsme this error:
Failed flashing process. 4/18 flash motoboot "motoboot.img" -> Phone returned FAIL.
Click to expand...
Click to collapse
Is your phone is charge enough? Search 5.1.1 att xml zip

can anybody give a solution for this problem because i am also with a xt1058 at&t, The device wasn't unlocked or rooted and the version that shows me is 30.BE too
sorry my english

What's up with your device any screen shot?

Hi, i have the same problem, my device is locked by AT&T and i cant flash the firmware< i have a unlock code from the AT&T company, how I can introdce that code manually? Thanks!

Thank you
H3c4rtr1 said:
Hi, i have the same problem, my device is locked by AT&T and i cant flash the firmware< i have a unlock code from the AT&T company, how I can introdce that code manually? Thanks!
Click to expand...
Click to collapse
You can help how you got the code, give details.
Thank you