Related
Hi all, just recently purchased Galaxy Tab Sprint from ebay.
I have tried to flash the device to european and now have it stuck at the Samsung screen. When I go into recovery mode I get errors referring to the sd card not being able to mount. Is anyone able to refer me to Sprint rom? or able to help me get the tab up and running.
Many Thanks
is this an internal or external sd card.. if external can you tell what class it is?
the error that I get is E: cant mount /dev/block/mmcblk0p2
(no such file or directory)
E:install_application_for customer:cant mount data
your storage not prepared yet yet please use UI menu.
Is there a recommend flash and pit file that will sort out the above?
Many Thanks
Does this mean that I need to send the phone back to samsung or a repair centre.
Can anyone help on this one?
Many Thanks
scottybee said:
Does this mean that I need to send the phone back to samsung or a repair centre.
Can anyone help on this one?
Many Thanks
Click to expand...
Click to collapse
i think you flashed an incomplete firmware... could you tell me what file/s you flashed? (.tar file contents also)..
I tried the the gt_p1000_mr.pt
and then tried the roto-jme-full-v4.tar.
Any help is really appreciated
Many Thanks
For how long was it stuck at logo? When I upgraded mine, the 1st boot up takes long time to boot. It took me about 2 to 3 minutes. I waited patiently and it loads into wizard settings. After that everything is ok. 2nd boot is very fast.
My guess is 1st boot is always very slow and it gives an impression that it is stuck maybe.
Sent from my GT-P1000 using XDA App
Great just tried re-flash now have a blank screen odbin can see the com port though.
try the attached .pit file with roto-jme-full-v4.tar.
also you could check this: http://forum.xda-developers.com/showthread.php?t=895827
Flash your tab back with sprint rom. Euro rom is gsm only, not for cdma like sprint or verizon.
Sent from my GT-P1000 using XDA App
does anyone know where the sprint rom is?
tried one in xda and made the phone dead.
Just flash with 2.3 P1000XXJQ now have screen still issue with sd card.
Do I need to manually format this?
If anyone knows where to sprint rom is then I'll give this a go.
Thanks everyone for your help so far really appreciate the responses.
just flashed with roto-jme-full-v4.tar and had to remove movinad as this failed to flash. Flash has passed within odbin and when reboot I got the error regarding unable to mount e:
Do I need to reformat the sd card within gparted or something??
tried various flashes and same error in recovery mode regarding e: not being able to mount.
Is the tablet really bricked and a case for the repair center?
same with my gt-p1000. i search it on internet, all point to internal SD card failed. someone told me after hours it will be finished restart and told you internal SD card was crashed.......
on HTC, it can be fastboot and recovered by ADB Shell... does anykonw how to make GT-P1000 fastboot?
anyone know how to do this??
and is this the case with our tabs being corrupted on the internal sd
jamflying said:
same with my gt-p1000. i search it on internet, all point to internal SD card failed. someone told me after hours it will be finished restart and told you internal SD card was crashed.......
on HTC, it can be fastboot and recovered by ADB Shell... does anykonw how to make GT-P1000 fastboot?
Click to expand...
Click to collapse
could you tell us more about what you did before your tab crashed??? thanks..
Basically flashed it with a euro rom. Now in recovery mode it complains about not being to mount. Tab was a sprint cdma and I have flashed it with gsm roto firmware and now stuck at samsung logo and errors in recovery about unable to mount.
Is the tab completely knackered??I go back to Samsung and send off and do they charge for this?
scottybee said:
anyone know how to do this??
and is this the case with our tabs being corrupted on the internal sd
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=969892
http://forum.xda-developers.com/showthread.php?t=1010852
hope this may be of help to you..
Tried the sprint rom, the pit file just sits at partition screen.
Do I need the pit file or can I just re-flash with the tar using odbin?
Some how managed to flash to sprint.
used p1 hidden pit followed by sph-100.dj
still get errors in the recovery mode regarding not beng able to mount e:
When device booted all working apart from sd card.
What ever card I put in the option on the tab is all greyed out?
internal shows 1.59gb
device does sound goofed!!!
Hii all,
Pls Help Me!!!!!
I ve changed the firmware of my sgs to cyanogenmod 7.0 and then i found dat its nt detecting the external sd card, i changed the firmware to gingerbread 2.3.4 using odin 1.0.....when i finished doin dat it was showing the boot screen ie the galaxy s logo and after that it is stuck up in the screen asking for CONFIRM PASSWORD...what will i enter in that section???i thought that it was bcoz of the firmware and i changed it back to my gingerbread 2.3.3 and its showing the same error...what i ll do with that??? shud i go to the customer care for fixing it or plss can anyone help me with that....awaiting the reply...
thanks in advance
jithin c anil
SEC S5PC110 Test B/D
i got my phone bricked too, doesn't go to download mode either phone-!-pc icon. won't power up also. damn. so stressful.
when usb plug to pc asking this driver for "SEC S5PC110 Test B/D"
i guess i had same feeling with you now *hiks*
jithincanil87 said:
Hii all,
Pls Help Me!!!!!
I ve changed the firmware of my sgs to cyanogenmod 7.0 and then i found dat its nt detecting the external sd card, i changed the firmware to gingerbread 2.3.4 using odin 1.0.....when i finished doin dat it was showing the boot screen ie the galaxy s logo and after that it is stuck up in the screen asking for CONFIRM PASSWORD...what will i enter in that section???i thought that it was bcoz of the firmware and i changed it back to my gingerbread 2.3.3 and its showing the same error...what i ll do with that??? shud i go to the customer care for fixing it or plss can anyone help me with that....awaiting the reply...
thanks in advance
jithin c anil
Click to expand...
Click to collapse
Repeatedly enter any random password and you will get past it
Sent from my GT-I9000 using XDA Premium App
Did you have a sim password before you re flashed your phone, if you did enter in the sim password, if not enter some random password a few times and eventually you should get a message saying that your internal SD card will be formated and all data,on it will be erased. It happened to me once and the method worked, good luck.
jithincanil87 said:
Hii all,
Pls Help Me!!!!!
I ve changed the firmware of my sgs to cyanogenmod 7.0 and then i found dat its nt detecting the external sd card, i changed the firmware to gingerbread 2.3.4 using odin 1.0.....when i finished doin dat it was showing the boot screen ie the galaxy s logo and after that it is stuck up in the screen asking for CONFIRM PASSWORD...what will i enter in that section???i thought that it was bcoz of the firmware and i changed it back to my gingerbread 2.3.3 and its showing the same error...what i ll do with that??? shud i go to the customer care for fixing it or plss can anyone help me with that....awaiting the reply...
thanks in advance
jithin c anil
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
wipe it？
replace another sim
Hello guys,
I've bought a galaxy plus , it works perfectly at first but when I restart my samsung it goes directly to the standard setup again.
I tried fixing the boatloader using odin, but during the dowloading proces it stops. The phone says MBR read Failed I've tried the recovery clokward file and the custom I9001XXKQ1_I9001DBTKP1_DBT file.
I can't get into recovery mode.
At first i thought it was a software problem, but maybe it is the internal memory chip?
Does anyone know how to fix this problem, or has an answer?
hello
Di9001 said:
Hello guys,
I've bought a galaxy plus , it works perfectly at first but when I restart my samsung it goes directly to the standard setup again.
I tried fixing the boatloader using odin, but during the dowloading proces it stops. The phone says MBR read Failed I've tried the recovery clokward file and the custom I9001XXKQ1_I9001DBTKP1_DBT file.
I can't get into recovery mode.
At first i thought it was a software problem, but maybe it is the internal memory chip?
Does anyone know how to fix this problem, or has an answer?
Click to expand...
Click to collapse
hello, i have that same problem, i have no idea how to get out..... please tell me you are handled whit this
best
im facing a surios problem which i've been trying too long to solve with no results
first my phone is on factory mode ,, and every time i use ADB shell to change the factory mode from off to on and reboot ,, its back again
second when i boot into recovery it keeps telling faild to mount efs ... ( i still have my imei num. , mac address ...... etc ) all still shown on the phone and i still can make calls and connect through wifi
and last but not least ,, my internal storage is giving 0.00b ,, so i cand install any apk
things i tried :
flash official stock firmware with odin
use adb to give some codes to get rid of factory mode which dosnt work !
cant really tell what caused this ,, since this phone belongs to my friend who dosnt seem to know anything >_<
any one can help plz !!!
any one ?!?
plzzz help !!!
Which model do you have?
Odin works? Or it says "success", but it flashed nothing? Try flashing another firmware version or another rom to check this.
Clostry said:
Which model do you have?
Odin works? Or it says "success", but it flashed nothing? Try flashing another firmware version or another rom to check this.
Click to expand...
Click to collapse
thx for replaying
odin works and says "success" ,,but every time it got stuck on booting ,, the only working firmware is the stock from samsung ,, with the problems mentioned above
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
afireon8 said:
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
Click to expand...
Click to collapse
It is recommended never to use "download+format all" option ......I have many times used sp flash tools for flashing stock rom ....I always used "firmware upgrade" option......I never faced any problem ....
same here bro...
my a1 also dead after flashing and not powering on
not even shows charging....
plz post if found any solution...
found something
i cannot try this because i dont hv fon with me....
http://forum.xda-developers.com/showthread.php?t=1943442
Try latest sptool i also face this problem & flash stock rom lollipop build may it will help you )*
just use sp flash tool 5.142
Guys m facing the same problem... Using sp flash tool version 5.1604 .. Help me plz